The concept of a Super Fixed Target Beauty Facility (SFT) which uses a relatively low intensity 20 TeV proton beam as a generator of very high momenta B's is an exciting prospect which is very competitive with other B factory ideas. The yields of B's in such a facility are quite high (3 {times} 10{sup 10} {yields} 10{sup 11} B's per year). At this level of statistics, CP violation measurements will be possible in many modes. In addition, the fixed target configuration, because of the high momenta of the produced B's and the resulting long decay lengths, facilitates the detection and reconstruction of B's and offers unique opportunities for observation of the B decays. The limited solid angle coverage required for the fixed target spectrometer makes the cost of the facility much cheaper than other e{sup +}e{sup {minus}} or hadron collider options under consideration. The relatively low intensity 20 TeV beam (1 {yields} 2 {times} 10{sup 8} protons/second) needed for the SFT makes it possible to consider an extraction system which operates concurrently and in a non-interfering manner with the other collider experiments. One possible method for generating such a beam, crystal channeling, is discussed.

The EMPACT experiment utilizes a broad approach to maximize its discovery potential for new phenomena accessible at the SSC. The high resolution detector has a balances emphasis on, and large acceptance for, electrons, muons, jets, and noninteracting particles, and is capable of utilizing the ultimate luminosity of the SSC. The detector emphasizes excellent calorimetry augmented by TRD tracking, and employs an innovative system of superconducting air core toroids for muon measurements. Significant engineering effort has established the feasibility of a baseline detector concept and has addressed the related issues of support facilities, assembly, and detector integration. The design has been tested against the challenges of predicted phenomena, with the expectation that this will optimize the capacity for observing the unexpected. EMPACT's international collaboration has unprecedented support from major aerospace industries who are providing tools and expertise for project design and integration, which will assure that a detector optimized for performance and cost will be available for the first collisions at the new laboratory.

The amount of data generated by CT scanners is enormous, making the reconstruction operation slow, especially for 3-D and limited-data scans requiring iterative algorithms. The Radon transform and its inverse, commonly used for CT image reconstruction from projections, are computationally burdensome for today's single-processor computer architectures. If the processing times for the forward and inverse Radon transforms were comparatively small, a large set of new CT algorithms would become feasible, especially those for 3-D and iterative tomographic image reconstructions. In addition to image reconstruction, a fast Radon Transform Computer'' could be naturally applied in other areas of multidimensional signal processing including 2-D power spectrum estimation, modeling of human perception, Hough transforms, image representation, synthetic aperture radar processing, and others. A high speed processor for this operation is likely to motivate new algorithms for general multidimensional signal processing using the Radon transform. In the proposed workshop paper, we will first describe interpolation schemes useful in computation of the discrete Radon transform and backprojection and compare their errors and hardware complexities. We then will evaluate through statistical means the fixed-point number system required to accept and generate 12-bit input and output data with acceptable error using the linear interpolation scheme selected. These …

This report presents the closing talk of the workshop on AGS heavy ion program held at BNL March 5--7, 1990. The emphasis is on new questions posed by the new data presented at this meeting with emphasis on the pion-proton puzzle. 10 refs., 1 fig., 1 tab.

Results that shed new light on the study of protein dynamics were obtained by quasi-elastic neutron scattering. The triple axis instrument H-9 supplied by the cold source was used to perform a detailed study of the quasi-elastic spectrum and the Debye-Waller factor for trypsin in powder form, in solution, and in crystals. A preliminary study of myoglobin crystals was also done. A new way to view the results of quasi-elastic scattering experiments is sketched, and the data on trypsin are presented and analyze according to this new picture.

The proof-of-concept test program was designed to clarify a number of concerns that have been raised by coal companies who own the valuable resin resource. First, from laboratory bench-scale flotation experiments, a froth product from cleaner flotation containing more than 80% hexane-extractable resin at higher than 80% recovery can be produced. Pilot-plant testing was initiated to demonstrate the selective flotation of fossil resin and to establish a better confidence level in the new technology. Second, pilot-plant testing was designed to evaluate the effect and impact of random variation in slurry solids concentration and feed grade on this new selective fossil resin flotation technology. The flotation performance obtained under these industrial conditions is more realistic for process evaluation. Third, more accurate operating cost data was to be obtained for economic analysis. Fourth, sufficient quantities of the fossil resin concentrate were to be produced from the test program for evaluation by potential industrial users. Fifth, and finally, optimum levels for the operating variables were to be established. Such information was required for eventual scale-up and design of a fossil resin flotation plant. The pilot-plant proof-of-concept testing of selective resinate flotation has demonstrated that: (1) technically, the new flotation technologies discovered at the …

This document describes the LLW simulant compositions, basis for the simulants, and recipes for preparing nonradioactive simulants for LLW melter tests.

The Electric Power Monthly (EPM) is prepared by the Survey Management Division; Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), Department of Energy. This publication provides monthly statistics at the US, Census division, and State levels for net generation, fossil fuel consumption and stocks, quantity and quality of fossil fuels, cost of fossil fuels, electricity sales, revenue, and average revenue per kilowatthour of electricity sold. Data on net generation, fuel consumption, fuel stocks, quantity and cost of fossil fuels are also displayed for the North American Electric Reliability Council (NERC) regions.

39 abstracts are presented of research projects in radiation chemistry, photochemistry, and related subjects.

The objective of this study was to examine the processes in coal/petroleum coprocessing systems which led to coke formation. Specifically, the interactions between the petroleum residue and coal, leading to retrogressive products, were investigated. Five coals were reacted with five model compounds in order to investigate the coal conversions in a variety of solvents and to determine the role of the solvent in promoting or inhibiting coal conversion. The selected model compounds range from paraffinic to fully aromatic and were chosen as representative of types of compounds that are found in petroleum residua. Coprocessing experiments were conducted using the five coals and three petroleum residua. The effect of temperature on coal conversions was crucial. The coal conversions at 350 and 400{degree}C seem to be governed by the nature of the coal and to a lesser extent by the petroleum residua. Negative coal conversions were observed above 400{degree}C indicating that retrogressive processes had occurred. At temperatures higher than 400{degree}C, the petroleum residua undergo physical and chemical transformations and the influence of the petroleum residua on coal conversions is significant. The structural features of the residues indicated that the residues were predominately coal-derived. An overall increase in aromaticity was observed with increasing …

Corrosion kinetics of SiC were investigated from 950 to 1100C at 0.63 vol% alkali vapor concentration. Corrosion rate in alkali is 10{sup 4} to 10{sup 5} times faster than oxidation rate of SiC in air. Activation energy of the alkali corrosion is 406 kj/mol, indicating a high sensitivity to temperature changes. Overall reaction appears to be controlled by the oxidation of SiC. The alkali corrosion kinetics of Si{sub 3}N{sub 4} from 950 to 1050{degrees}C were also examined in the same atmosphere (0.63 vol% alkali vapors). Reaction thickness of Si{sub 3}N{sub 4} appears to vary linearly with reaction time from 950 to 1050C, suggesting that the alkali corrosion process is controlled by the oxidation of Si{sub 3}N{sub 4}. At 1050{degrees}C, the alkali-enhanced oxidation of Si{sub 3}N{sub 4} is approximately 10{sup 7} times faster than the oxidation of Si{sub 3}N{sub 4} in dry oxygen. Compared to SiC corroded in the same alkali atmosphere, Si{sub 3}N{sub 4} seems to be less alkali-resistant than SiC. Phase relations of the Na{sub 2}O-Al{sub 2}TiO{sub 5} vertical section from 5--40 wt% Na{sub 2}O and 840-1100C were studied. Phase analysis indicates that this section is not a true binary system. A tentative phase diagram for the Na{sub 2}O-Al{sub …

Results that shed new light on the study of protein dynamics were obtained by quasi-elastic neutron scattering. The triple axis instrument H-9 supplied by the cold source was used to perform a detailed study of the quasi-elastic spectrum and the Debye-Waller factor for trypsin in powder form, in solution, and in crystals. A preliminary study of myoglobin crystals was also done. A new way to view the results of quasi-elastic scattering experiments is sketched, and the data on trypsin are presented and analyze according to this new picture.

Energy production during February 1994 totaled 5.3 quadrillion Btu, a 2.2% increase over February 1993. Coal production increased 9%, natural gas rose 2.5%, and petroleum decreased 3.6%; all other forms of energy production combined were down 3%. Energy consumption during the same period totaled 7.5 quadrillion Btu, 4.1% above February 1993. Natural gas consumption increased 5.8%, petroleum 5.2%, and coal 2.3%; consumption of all other energy forms combined decreased 0.7%. Net imports of energy totaled 1.4 quadrillion Btu, 16.9% above February 1993; petroleum net imports increased 10.1%, natural gas net imports were down 4.9%, and coal net exports fell 43.7%. This document is divided into: energy overview, energy consumption, petroleum, natural gas, oil and gas resource development, coal, electricity, nuclear energy, energy prices, international energy, appendices (conversion factors, etc.), and glossary.

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information. The featured articles for this month are: Opportunities with fuel cells, and revisions to monthly natural gas data.

In the late 1980s, DOE decided to construct a Uranium Solidification Facility at the Savannah River Site to process liquid uranyl nitrate into powder. Since the need for weapons materials has been reduced, an audit was conducted to assess the need for this facility. The audit disclosed that DOE continued to construct the facility, because DOE`s procedures did not ensure that projects of this type were periodically reassessed when significant program changes occurred. The audit identified more economical alternatives for processing existing quantities of liquid uranyl nitrate at the Savannah River Site.

This document defines the procedure to be used in the 18 inch drop test to be used for design verification of the RTG Transportation System Package Mounting.

FFTF (Fast Flux Test Facility) is a 400-MW(t) sodium-cooled, fast flux test reactor at Hanford, designed to test fuels and materials for advanced nuclear power plants; it has no capability for generating electric power. Since a long-term mission could not be found for FFTF, it was placed in standby, and a recommendation was made that it be shut down. Purpose of the FFTF Transition Project is to prepare it for Decontamination and Decommissioning; this will be accomplished by establishing a passively safe and environmentally secure configuration, that can be preserved for several decades. This report presents the results of the mission analysis, which is required by Hanford systems engineering procedures.

Performance assessments are required for low-level radioactive waste disposal facilities to demonstrate compliance with the performance objectives, consider human exposures from water, air, and inadvertent intruder pathways. Among these, the groundwater pathway analysis usually involves complex numerical simulations with results which are often difficult to verify and interpret. This paper presents a technique to identify and simplify the essential parts of the groundwater analysis. The transport process of radionuclides including infiltration of precipitation, leachate generation, and advection and dispersion in the groundwater is divided into several steps. For each step, a simple analytical model is constructed and refined to capture the dominant phenomena represented in the complex analysis included in a site-specific performance assessment. This step-wise approach provides a means for gaining insights into the transport process and obtaining reasonable estimates of relevant quantities for facility design and site evaluation.

The objective of this analysis is to identify and review potential options for processing and disposing of the secondary low-level waste (LLW) that will be generated through operation of the Monitored Geologic Repository (MGR). An estimate of annual secondary LLW is generated utilizing the mechanism established in ''Secondary Waste Treatment Analysis'' (Reference 8.1) and ''Secondary Low-Level Waste Generation Rate Analysis'' (Reference 8.5). The secondary LLW quantities are based on the spent fuel and high-level waste (HLW) arrival schedule as defined in the ''Controlled Design Assumptions Document'' (CDA) (Reference 8.6). This analysis presents estimates of the quantities of LLW in its various forms. A review of applicable laws, codes, and standards is discussed, and a synopsis of those applicable laws, codes, and standards and their impacts on potential processing and disposal options is presented. The analysis identifies viable processing/disposal options in light of the existing laws, codes, and standards, and then evaluates these options in regard to: (1) Process and equipment requirements; (2) LLW disposal volumes; and (3) Facility requirements.

Westinghouse Hanford Company is interested in innovative, commercially available or adaptable retrieval system equipment, concepts, and contracting strategies that will ad to existing Hanford Site technology and significantly reduce cost and/or risk from the baseline retrieval approach of sluicing (hydraulically mining) the waste from the SSTs onsite. The objective of this request is to gather information from industry to identify and summarize a suite of retrieval-related components, systems, and contracting approaches. This information will be used to ensure that WHC understands the various waste retrieval alternative approaches, their risks, and their application on the Hanford Site tanks for those occasions when sluicing is not sufficiently effective, appropriate, or cost-effective. An additional objective is to facilitate industry`s understanding of the tank and site interface requirements for SST waste retrieval and the complex statutory, legal, regulatory, labor, and other institutional standards being applied to the Hanford Site. This effort will identify and summarize retrieval solutions by the end of September 1996 so that a clear basis for future retrieval program decisions can be established.

In this contribution I am going to discuss the development of large arrays of Compton Suppressed, High Purity Germanium (HpGe) detectors and the physics that has been, that is being, and that will be done with them. These arrays and their science have dominated low-energy nuclear structure research for the last twenty years and will continue to do so in the foreseeable future. John Sharpey Schafer played a visionary role in convincing a skeptical world that the development of these arrays would lead to a path of enlightenment. The extent to which he succeeded can be seen both through the world-wide propagation of ever more sophisticated devices, and through the world-wide propagation of his students. I, personally, would not be working in research if it were not for Johns inspirational leadership. I am eternally grateful to him. Many excellent reviews of array physics have been made in the past which can provide detailed background reading. The review by Paul Nolan, another ex-Sharpey Schafer student, is particularly comprehensive and clear.

Stabilization of whirl instability by floppy, viscous bearing mounts is discussed and required material properties are estimated for the new tilt-whirl mode in eddy-current stabilized magnetic bearings. A relatively low Young`s modules Y {approximately} 10{sup 5} and high viscosity {zeta} {approximately} 10{sup 7} are required (both in MKS units), suggesting the need for careful mounting design. New information on periodic bearings shows that, thus far, Earshaw`s Theorem cannot be defeated by periodicity, despite the author`s earlier claims.

The geometric construction of the E. Cartan moment of rotation associated to the spacetime curvature provides a geometric interpretation of the gravitational field sources and describes geometrically how the sources are ``wired`` to the field in standard geometrodynamics. E. Cartan moment of rotation yields an alternate way (as opposed to using variational principles) to obtain Einstein equations. The E. Cartan construction uses in an essential way the soldering structure of the frame bundle underlying the geometry of the gravitational field of general relativity. The geometry of Ashtekar`s connection formulation of gravitation theory is based on a complex-valued self-dual connection that is defined not on the frame bundle of spacetime but, rather, on its complexification. We show how to transfer the construction of the E. Cartan moment of rotation to Ashtekar`s theory of gravity and demonstrate that no spurious equations are produced via this procedure.

The design, installation and performance data of a 20 W pulsed laser system for the 3 meter Shane telescope at the Lick Observatory is presented.