Single crystals of magnesium-aluminate spinel were implanted with 170 keV He{sup +} ions to fluences ranging from 1 x 10{sup 16}--1 x 10{sup 21} ions/m{sup 2} at 120 K. The effects of ion implantation were studied using optical absorption spectroscopy, Rutherford Backscattering Spectroscopy and Ion Channeling (RBS/C) and Transmission Electron Microscopy (TEM). In absorption spectra obtained from the implanted samples, growth of an F-center band at 5.3 eV was observed. At the fluence of 3 x 10{sup 20} ions/m{sup 2}, the growth of this band not only ceases but the intensity suddenly decreases. This may be due to formation of a new phase at this fluence. This is partially confirmed by the fact that beginning at this dose, a modulated absorbance becomes apparent in the absorption spectrum of spinel. This effect is caused by formation of a buried layer with refraction index lower than that of an unimplanted sample. RBS/C and TEM measurements show that spinel is not amorphized over the fluence range examined in this study. TEM microdiffraction observations show that in the damaged region the intensities of superlattice spots decrease significantly, suggesting that ion beam irradiation induces either an order-disorder phase transition or a transformation into the so-called …

The amount of data generated by CT scanners is enormous, making the reconstruction operation slow, especially for 3-D and limited-data scans requiring iterative algorithms. The Radon transform and its inverse, commonly used for CT image reconstruction from projections, are computationally burdensome for today's single-processor computer architectures. If the processing times for the forward and inverse Radon transforms were comparatively small, a large set of new CT algorithms would become feasible, especially those for 3-D and iterative tomographic image reconstructions. In addition to image reconstruction, a fast Radon Transform Computer'' could be naturally applied in other areas of multidimensional signal processing including 2-D power spectrum estimation, modeling of human perception, Hough transforms, image representation, synthetic aperture radar processing, and others. A high speed processor for this operation is likely to motivate new algorithms for general multidimensional signal processing using the Radon transform. In the proposed workshop paper, we will first describe interpolation schemes useful in computation of the discrete Radon transform and backprojection and compare their errors and hardware complexities. We then will evaluate through statistical means the fixed-point number system required to accept and generate 12-bit input and output data with acceptable error using the linear interpolation scheme selected. These …

Two possible upgrades, a shower maximum detector and a presampler, designed to improve the low energy electron/hadron separation capabilities of the ZEUS barrel calorimeter are described and test-beam results are reported. The presampler can also be used to correct for energy loss of particles traversing the dead material in front of the calorimeter.

This report describes the research that supports the Subsurface Science Program by maintaining a culture collection of microorganisms isolated from deep terrestrial subsurface environments (the Subsurface Microbial Culture Collection, or SMCC). The general distribution of cultures and data was identified as an important function of the SMCC. The accomplishments related to this function of the culture collection are described.

We have fabricated 15.4%- and 12.4%-efficient CuIn1-XGaXSe2 (CIGS)-based photovoltaic devices from solution-based electrodeposition (ED) and electroless-deposition (EL) precursors. As-deposited precursors are Cu-rich CIGS. Additional In, Ga, and Se are added to the ED and EL precursor films by physical vapor deposition (PVD) to adjust the final film composition to CuIn1-XGaXSe2. The ED and EL device parameters are compared with those of a recent world record, an 18.8%-efficient PVD device. The tools used for comparison are current voltage, capacitance voltage, and spectral response characteristics.

The transport properties of a quasi-three-dimensional, 200 layer quantum well structure are investigated at integer filling in the quantum Hall state. We find that the transverse magnetoresistance R_xx, the Hall resistance R_xy, and the vertical resistance R_zz all follow a similar behavior with both temperature and in-plane magnetic field. A general feature of the influence of increasing in-plane field B_in is that the Hall conductance quantization first improves, but above a characteristic value B^C_in, the quantization is systematically removed. We consider the interplay of the chid edge state transport and the bulk (quantum Hall) transport properties. This mechanism may arise from the competition of the cyclotron energy with the superlattice band structure energies. A comparison of the resuIts with existing theories of the chiral edge state transport with in-plane field is also discussed.

The intermetallic compound, molybdenum disilicide (MoSi{sub 2}) is being considered for high temperature structural applications because of its high melting point and superior oxidation resistance at elevated temperatures. The lack of high temperature strength, creep resistance and low temperature ductility has hindered its progress for structural applications. Plasma spraying of coatings and structural components of MoSi{sub 2}-based composites offers an exciting processing alternative to conventional powder processing methods due to superior flexibility and the ability to tailor properties. Laminate, discontinuous and in situ reinforced composites have been produced with secondary reinforcements of Ta, Al{sub 2}O{sub 3}, SiC, Si{sub 3}N{sub 4} and Mo{sub 5}Si{sub 3}. Laminate composites, in particular, have been shown to improve the damage tolerance of MoSi{sub 2} during high temperature melting operations. A review of research which as been performed at Los Alamos National Laboratory on plasma spraying of MoSi{sub 2}-based composites to improve low temperature fracture toughness, thermal shock resistance, high temperature strength and creep resistance will be discussed.

We present preliminary results on three SLD analyses: the gluon energy spectrum in 3-jet b{bar b}g events, the rate of g {r_arrow} b{bar b}, and the b fragmentation function in Z{sup 0} decays. The gluon energy spectrum, measured over the full kinematic range, is compared with perturbative QCD predictions. We set new 95% C.L. limits on the anomalous chromomagnetic coupling of the b quark: {minus}0.09 < {kappa} < 0.06. g{sub b{bar b}} is measured to be (3.07 {+-} 0.71 (stat) {+-} 0.66 (syst)) x 10{sup {minus}3}. The inclusive B hadron energy distribution is measured for the first time over the full kinematic range, using a novel B hadron energy reconstruction technique. Several models of b fragmentation including JETSET + Peterson are excluded by the data. The average scaled B hadron energy of the weakly decaying B hadron is measured to be x{sub B} = 0.713 {+-} 0.005 (stat) {+-} 0.007 (syst) {+-} 0.002 (model). All three measurements take advantage of the small and stable SLC interaction point as well as the excellent vertexing and tracking capabilities of the upgraded CCD-pixel vertex detector.

The authors conducted perforation experiments with 4340 Rc 38 and T-250 maraging steel, long rod projectiles and HY-100 steel target plates at striking velocities between 80 and 370 m/s. Flat-end rod projectiles with lengths of 89 and 282 mm were machined to nominally 30-mm-diameter so they could be launched from a 30-mm-powder gun without sabots. The target plates were rigidly clamped at a 305-mm-diameter and had nominal thicknesses of 5.3 and 10.5 mm. Four sets of experiments were conducted to show the effects of rod length and plate thickness on the measured ballistic limit and residual velocities. In addition to measuring striking and residual projectile velocities, they obtained framing camera data on the back surfaces of several plates that showed clearly the plate deformation and plug ejection process. They also present a beam model that exhibits qualitatively the experimentally observed mechanisms.

Stabilization of whirl instability by floppy, viscous bearing mounts is discussed and required material properties are estimated for the new tilt-whirl mode in eddy-current stabilized magnetic bearings. A relatively low Young`s modules Y {approximately} 10{sup 5} and high viscosity {zeta} {approximately} 10{sup 7} are required (both in MKS units), suggesting the need for careful mounting design. New information on periodic bearings shows that, thus far, Earshaw`s Theorem cannot be defeated by periodicity, despite the author`s earlier claims.

We evaluate hydrazine (Hy) as a nitrogen precursor source for the growth of GaNAs and GaInNAs for application in 1-eV solar cells lattice-matched to GaAs, and compare it to the more commonly used dimethylhydrazine (DMHy). The incorporation efficiency of N into the GaNAs alloy is found to be one to two orders of magnitude higher with Hy than with DMHy. This high N incorporation makes convenient the growth of GaNAs at higher growth temperatures, Tg=650 C, and arsine flows, AsH3/III=44, than are generally possible with the use of DMHy. GaInNAs and GaNAs solar cells are grown under these growth conditions and compared to a GaAs cell grown under the same conditions to determine the extent to which the poor minority-carrier properties routinely observed for the N-containing material can be attributed to the growth conditions. Finally, the background carrier concentrations for Hy- and DMHy-grown material are compared, and little difference is found between the two sources..

The design, installation and performance data of a 20 W pulsed laser system for the 3 meter Shane telescope at the Lick Observatory is presented.

Radioactive material packages containing fiberboard insulation have been subjected to Hypothetical Accident Condition (HAC) thermal tests for many years. Historically, the packages` thermal performance has always been difficult to grasp. A package designer needs to understand the effects of temperature and pyrolysis on the rate of heat transfer and performance. This paper describes in detail the one-dimensional HAC thermal tests performed on fiberboard to understand the effects of pyrolysis, its char and its gas products. The tests were conducted by the Packaging and Transportation Group at the Savannah River Site (SRS). Test fixtures were assembled at SRS and thermal testing conducted in the Radiant Heat Facility at the Sandia National Laboratories. Descriptions of the test fixtures are provided, as well as the time dependent temperature profiles. In addition, lessons learned are discussed.

This report presents the closing talk of the workshop on AGS heavy ion program held at BNL March 5--7, 1990. The emphasis is on new questions posed by the new data presented at this meeting with emphasis on the pion-proton puzzle. 10 refs., 1 fig., 1 tab.

Spectral broadening of single-frequency laser pulses by optical cross-phase modulation (XPM) with chaotic laser pulses in birefringent single-mode optical fibers is investigated numerically and results are compared with experiments. By this process we have generated laser pulses of variable bandwidth (1--25 {Angstrom}) at the fundamental wavelength (1053 nm) for amplification in high power solid-state Nd:glass lasers used for inertial confinement fusion research. Simulations indicate that a temporally smooth XPM pulse can be generated with intensity fluctuations of less than 10% and spectral width greater than 50 {Angstrom} using a short length ({approximately}5 m) of special low dispersion and low birefringence fiber, e.g. D = 10 ps/nm-km (normal dispersion) and {Delta}n = 2 {times} 10{sup {minus}5}. Readily available fibers of similar length, with parameters of D = 40 ps/nm-km and {Delta}n = 6 {times} 10{sup {minus}5}, can give spectral widths exceeding 25 {Angstrom}, but the noise will range from 25 to 60%. Broadband laser pulses generated by XPM are now routinely used at Lawrence Livermore National Laboratory for active smoothing of the laser irradiance on targets by the technique of smoothing-by-spectral dispersion.

The proof-of-concept test program was designed to clarify a number of concerns that have been raised by coal companies who own the valuable resin resource. First, from laboratory bench-scale flotation experiments, a froth product from cleaner flotation containing more than 80% hexane-extractable resin at higher than 80% recovery can be produced. Pilot-plant testing was initiated to demonstrate the selective flotation of fossil resin and to establish a better confidence level in the new technology. Second, pilot-plant testing was designed to evaluate the effect and impact of random variation in slurry solids concentration and feed grade on this new selective fossil resin flotation technology. The flotation performance obtained under these industrial conditions is more realistic for process evaluation. Third, more accurate operating cost data was to be obtained for economic analysis. Fourth, sufficient quantities of the fossil resin concentrate were to be produced from the test program for evaluation by potential industrial users. Fifth, and finally, optimum levels for the operating variables were to be established. Such information was required for eventual scale-up and design of a fossil resin flotation plant. The pilot-plant proof-of-concept testing of selective resinate flotation has demonstrated that: (1) technically, the new flotation technologies discovered at the …

Coulomb driven, magneto-optically induced electron and hole bound states from a series of heavily doped GaAs/Al_0.3Ga_0.7As single heterojunctions (SHJ) are revealed in high magnetic fields. At low magnetic fields ({nu} >2), the photohuninescence spectra display Shubnikov de-Haas type oscillations associated with the empty second subband transition. In the regime of the Landau filling factor {nu} <1 and 1< {nu} <2, we found strong bound states due to Mott type Vocalizations. Since a SHJ has an open valence band structure, these bound states area unique property of the dynamic movement of the valence holes in strong magnetic fields.

The geometric construction of the E. Cartan moment of rotation associated to the spacetime curvature provides a geometric interpretation of the gravitational field sources and describes geometrically how the sources are ``wired`` to the field in standard geometrodynamics. E. Cartan moment of rotation yields an alternate way (as opposed to using variational principles) to obtain Einstein equations. The E. Cartan construction uses in an essential way the soldering structure of the frame bundle underlying the geometry of the gravitational field of general relativity. The geometry of Ashtekar`s connection formulation of gravitation theory is based on a complex-valued self-dual connection that is defined not on the frame bundle of spacetime but, rather, on its complexification. We show how to transfer the construction of the E. Cartan moment of rotation to Ashtekar`s theory of gravity and demonstrate that no spurious equations are produced via this procedure.

The magnetophotoluminescence (MPL) behavior of a GaAs/Al_0.3Ga_0.7As single heterojunction has been investigated to 60T. We observed negatively charged singlet and triplet exciton states that are formed at high magnetic fields beyond the {nu}=l quantum Hall state. The variation of the charged exciton binding energies are in good agreement with theoretical predictions. The MPL transition intensities for these states showed intensity variations (maxima and minima) at the {nu}=l/3 and 1/5 fractional quantum Hall (FQH) state as a consequence of a large reduction of electron-hole screening at these filling factors.

We present here the results of polarized magneto-photoluminescence measurements on a high mobility single-heterojunction. The presence of a doublet structure over a large magnetic field range (2>v>l/6) is interpreted as possible evidence for the existence of a magneto-roton minima of the charged density waves. This is understood as an indication of strong electronic correlation even in the case of the IQHE limit.

The objective of this analysis is to identify and review potential options for processing and disposing of the secondary low-level waste (LLW) that will be generated through operation of the Monitored Geologic Repository (MGR). An estimate of annual secondary LLW is generated utilizing the mechanism established in ''Secondary Waste Treatment Analysis'' (Reference 8.1) and ''Secondary Low-Level Waste Generation Rate Analysis'' (Reference 8.5). The secondary LLW quantities are based on the spent fuel and high-level waste (HLW) arrival schedule as defined in the ''Controlled Design Assumptions Document'' (CDA) (Reference 8.6). This analysis presents estimates of the quantities of LLW in its various forms. A review of applicable laws, codes, and standards is discussed, and a synopsis of those applicable laws, codes, and standards and their impacts on potential processing and disposal options is presented. The analysis identifies viable processing/disposal options in light of the existing laws, codes, and standards, and then evaluates these options in regard to: (1) Process and equipment requirements; (2) LLW disposal volumes; and (3) Facility requirements.

In this contribution I am going to discuss the development of large arrays of Compton Suppressed, High Purity Germanium (HpGe) detectors and the physics that has been, that is being, and that will be done with them. These arrays and their science have dominated low-energy nuclear structure research for the last twenty years and will continue to do so in the foreseeable future. John Sharpey Schafer played a visionary role in convincing a skeptical world that the development of these arrays would lead to a path of enlightenment. The extent to which he succeeded can be seen both through the world-wide propagation of ever more sophisticated devices, and through the world-wide propagation of his students. I, personally, would not be working in research if it were not for Johns inspirational leadership. I am eternally grateful to him. Many excellent reviews of array physics have been made in the past which can provide detailed background reading. The review by Paul Nolan, another ex-Sharpey Schafer student, is particularly comprehensive and clear.

FFTF (Fast Flux Test Facility) is a 400-MW(t) sodium-cooled, fast flux test reactor at Hanford, designed to test fuels and materials for advanced nuclear power plants; it has no capability for generating electric power. Since a long-term mission could not be found for FFTF, it was placed in standby, and a recommendation was made that it be shut down. Purpose of the FFTF Transition Project is to prepare it for Decontamination and Decommissioning; this will be accomplished by establishing a passively safe and environmentally secure configuration, that can be preserved for several decades. This report presents the results of the mission analysis, which is required by Hanford systems engineering procedures.

None