This technical memorandum was prepared to: (1) describe a typical basalt radionuclide repository site, (2) describe geologic and hydrologic processes associated with regional radionuclide transport in basalts, (3) define the parameters required to model regional radionuclide transport from a basalt repository site, and (4) develop a ''conceptual model'' of radionuclide transport from a basalt repository site. In a general hydrological sense, basalts may be described as layered sequences of aquifers and aquitards. The Columbia River Basalt, centered near the semi-arid Pasco Basin, is considered by many to be typical basalt repository host rock. Detailed description of the flow system including flow velocities with high-low hydraulic conductivity sequences are not possible with existing data. However, according to theory, waste-transport routes are ultimately towards the Columbia River and the lengths of flow paths from the repository to the biosphere may be relatively short. There are many physical, chemical, thermal, and nuclear processes with associated parameters that together determine the possible pattern of radionuclide migration in basalts and surrounding formations. Brief process descriptions and associated parameter lists are provided. Emphasis has been placed on the use of the distribution coefficient in simulating ion exchange. The use of the distribution coefficient approach is limited …

This operator's manual for the DART II Data Acquisition, Reduction, and Transmission system is divided into the following sections: system capabilities and configuration; ways in which the microprocessor-based central processing unit communicates with the memory and peripheral devices; theory of operation for the system components; and a section of reference data including schematic diagrams, cable lists, device specification sheets and other detailed information. (GHT)

Preliminary calculations of Q and magnet designs are presented for three different versions of tandem mirror reactors (TMR) using thermal barriers to enhance plug potentials by auxiliary electron heating. These three versions, called A-cell-barrier TMR, axisymmetric-barrier TMR, and inside-barrier TMR, exhibit reduced plug density (n/sub p/ << 10/sup 19/ m/sup -3/) and less required magnetic mirror field (B/sub mirror approx. = 9 T) compared to TMR designs without thermal barriers. A-cell barrier TMR Q's range from 5 to 25 depending on the central-cell length (L/sub c/ = 100 to 200 m) and peak center-cell beta ..beta../sub c/ (0.3 to 0.7) allowed by MHD stability. Axisymmetric-barrier TMR Q's range from 14 at L/sub c/ = 100 m to 30 at L/sub c/ = 200 m, if peak ..beta../sub c/ = 1. From a global equilibrium model for the inside-barrier TMR, Q values greater than 15 are achieved for ..nu.. = 0.5 in the modified Boltzmann relation for the plug potential. Even higher Q's are obtained using ECRF heating in the barrier to create a hot, mirror-trapped electron population. TMR's burning D-D as a fuel have been analyzed with a modified version of the global equilibrium model and under the assumption of …

Activities initiated after the start of the revegetation project on Alaskan coal mine spoils on September 1, 1979 have consisted mainly of some fall plantings (dormant seedings) and soil and coal spoil samplings and analyses. Because of the late summer start for the project, only a limited amount of field work could be initiated in plant material studies. This consisted of a fall planting at the Usibelli mine site at Healy in interior Alaska. The planting was intended to test the efficacy of seeding in the frost period following the growing season, requiring the seed to remain dormant over winter and to germinate when conditions become favorable in late spring. It also was intended as a comparison of a number of different grasses. Thirty entries were seeded in three replications. Fifteen species of grasses and a clover were included in the trial. The site provided for the trial was on overburden material along a streambed. Among the entries were eight cultivars of introduced grasses, five cultivars of native Alaskan germplasm, one introduced clover cultivar, and sixteen experimental grasses mainly of Alaskan origin.

A Monte Carlo IBM-7090 program (OGRE-P1) was written for calculation of the dose rate on one side of a slab owing to an isotropic, cosine, or collimated monoenergetic gamma radiation source on the other side of the slab. A maximum of 50 homogeneous regions are permitted. (auth)

This paper discusses decontamination methods for LWRs. Emphasis is on the chemical cleaning of primary systems and contaminated equipment and components. The equipment is composed primarily of stainless steel, Inconel, Zircaloy, and a few other materials. Variables affecting efficiency are discussed. 10 figures. (DLC)

Nb/sub 3/Sn is a strain-sensitive superconductor which exhibits large changes in properties for strains of less than 1 percent. The critical current density at 12 T undergoes a reversible degradation of a factor of two for compressive strains of about 1 percent and undergoes an irreversible degradation for tensile strains on the Nb/sub 3/Sn greater than 0.2 percent. Consequently, the successful application of Nb/sub 3/Sn in large high-field magnets requires a complete understanding of the mechanical properties of the conductor. One conductor which is being used for many applications consists of filaments of Nb/sub 3/Sn in a bronze matrix, and much progress has been made in understanding the mechanical behavior of this composite. The Nb/sub 3/Sn filaments are placed in compression due to the differential thermal contraction between Nb/sub 3/Sn and bronze which occurs when the composite is cooled from the Nb/sub 3/Sn formation temperature (typically 700/sup 0/C) to the 4.2/sup 0/K operating temperature. The general behavior of the critical current when this conductor is subjected to a tensile stress is an increase to a maximum when the compressive strain on the Nb/sub 3/Sn is relieved, followed by a decrease as the Nb/sub 3/Sn filemants are placed in tension. The …

The DART II is a data acquisition system that can be used with air pollution monitoring equipment. This volume contains appendices that deal with the following topics: adjustment and calibration procedures (power supply adjustment procedure, ADC calibration procedure, analog multiplexer calibration procedure); mother board signature list; schematic diagrams; device specification sheets (microprocessor, asynchronous receiver/transmitter, analog-to-digital converter, arithmetic processing unit, 5-volt power supply, +- 15-volt power supply, 24-volt power supply, floppy disk formater/controller, random access static memory); ROM program listing; 6800 microprocessor instruction set, octal listing; and cable lists. (RR)

Candidate materials are discussed and initial choices made for the critical elements in a liquid Li-Na Cauldron Tandem Mirror blanket and the General Atomic Sulfur-Iodine Cycle for thermochemical hydrogen production. V and Ti alloys provide low neutron activation, good radiation damage resistance, and good chemical compatibility for the Cauldron design. Aluminide coated In-800H and siliconized SiC are materials choices for heat exchanger components in the thermochemical cycle interface.

NOVANET is a control system oriented fiber optic local area network that was designed to meet the unique and often conflicting requirements of the Nova laser control system which will begin operation in 1984. The computers and data acquisition devices that form the distributed control system for a large laser fusion research facility need reliable, high speed communications. Both control/status messages and experimental data must be handled. A subset of NOVANET is currently operating on the two beam Novette laser system.

Ballistic transport simulation in nanodevices, which involves self-consistently solving a coupled Schrodinger-Poisson system of equations, is usually computationally intensive. Here, we propose coupling the reduced basis method with the subband decomposition method to improve the overall efficiency of the simulation. By exploiting a posteriori error estimation procedure and greedy sampling algorithm, we are able to design an algorithm where the computational cost is reduced significantly. In addition, the computational cost only grows marginally with the number of grid points in the confined direction.

Annual Illness and Injury Surveillance Program report for 2003 for Sandia National Laboratories-Albuquerque. The U.S. Department of Energy’s (DOE) commitment to assuring the health and safety of its workers includes the conduct of epidemiologic surveillance activities that provide an early warning system for health problems among workers. The IISP monitors illnesses and health conditions that result in an absence of workdays, occupational injuries and illnesses, and disabilities and deaths among current workers.

Annual Illness and Injury Surveillance Program report for 2003 for ORNL. The U.S. Department of Energy’s (DOE) commitment to assuring the health and safety of its workers includes the conduct of epidemiologic surveillance activities that provide an early warning system for health problems among workers. The Illness and Injury Surveillance Program monitors illnesses and health conditions that result in an absence of workdays, occupational injuries and illnesses, and disabilities and deaths among current workers.

None

Cathodic arc plasmas are considered fully ionized and theycontain multiply charged ions, yet, gaseous and metal neutrals can bepresent. It is shown that they can cause a significant reduction of theion charge states as measured far from the cathode spots. Several cathodematerials were used to study the evolution the mean ion charge state as afunction of time after arc ignition. The type of cathode material, arccurrent amplitude, intentionally increased background gas, additionalsurfaces placed near the plasma flow, and other factors influence thedegree of charge state reduction because all of these factors influencethe density of neutrals. In all cases, it was found that the mean ioncharge state follows an exponential decay of first order, Q(t) = A *exp(t/tau) + Qss, where A is a parameter describing the importance of thedecay, tau is the characteristic decay time, and Qss is a steady-statevalue approached for continuous arc operation. The extrapolated valuesQ(t-->0) indicate surprisingly high mean charge states as produced atcathode spots and not "skewed" by charge exchange collisions withneutrals.

The closure process for high level waste tanks at the Savannah River Site will require dissolution of the crystallized salts that are currently stored in many of the tanks. The insoluble residue from salt dissolution is planned to be removed by an Enhanced Chemical Cleaning (ECC) process. Development of a chemical cleaning process requires an insoluble salt simulant to support evaluation tests of different cleaning methods. The Process Science and Engineering section of SRNL has been asked to develop an insoluble salt simulant for use in testing potential ECC processes (HLE-TTR-2007-017). An insoluble salt simulant has been developed based upon the residues from salt dissolution of saltcake core samples from Tank 28F. The simulant was developed for use in testing SRS waste tank chemical cleaning methods. Based on the results of the simulant development process, the following observations were developed: (1) A composition based on the presence of 10.35 grams oxalate and 4.68 grams carbonate per 100 grams solids produces a sufficiently insoluble solids simulant. (2) Aluminum observed in the solids remaining from actual waste salt dissolution tests is probably precipitated from sodium aluminate due to the low hydroxide content of the saltcake. (3) In-situ generation of aluminum hydroxide (by …

Annual Illness and Injury Surveillance Program report for 2003 for the Nevada Test Site. The U.S. Department of Energy’s (DOE) commitment to assuring the health and safety of its workers includes the conduct of epidemiologic surveillance activities that provide an early warning system for health problems among workers. The Illness and Injury Surveillance Program monitors illnesses and health conditions that result in an absence of workdays, occupational injuries and illnesses, and disabilities and deaths among current workers.

None

Various methods are described to translate Faraday rotation measurements into a useful representation of the dynamic current under investigation[1]. For some experiments, simply counting the “fringes” up to the turnaround point in the recorded Faraday rotation signal is sufficient in determining the peak current within some allowable fringe uncertainty. For many other experiments, a higher demand for unfolding the entire dynamic current profile is required. In such cases, investigators often rely extensively on user interaction on the Faraday rotation data by visually observing the data and making logical decisions on what appears to be turnaround points and/or inflections in the signal. After determining extrema, inflection points, and locations, a piece-wise, ΔI/Δt, representation of the current may be revealed with the proviso of having a reliable Verdet constant of the Faraday fiber or medium and time location for each occurring fringe. In this paper, a unique software program is reported which automatically decodes the Faraday rotation signal into a time-dependent current representation. System parameters such as the Faraday fiber’s Verdet constant and number of loops in the sensor are the only user-interface inputs. The central aspect of the algorithm utilizes a short-time Fourier transform (STFT) which reveals much of the Faraday …

The major objectives of the proposed study are to 1) determine the leaching characteristics of Cr(VI) from contaminated sediments collected from 100 area spill sites, 2) elucidate possible Cr(VI) mineral and/or chemical associations that may be responsible for Cr(VI) retention in the Hanford site 100 areas through the use of i) macroscopic solubility studies and ii) microscale characterization of contaminated sediments, and 3) from these data construct a conceptual model of Cr(VI) geochemistry in the Hanford 100 area vadose zone. These objectives are based on locating and obtaining contaminated sediment with depth and at varying Cr(VI) concentrations as we hypothesize that mineral/chemical-Cr(VI) associations should be related to the total Cr concentration and other master geochemical variables (e.g., pH, counter-cation type and concentration, and water content). In addressing these objectives, additional benefits accrued will be (1) a fuller understanding of Cr(VI) entrained in the vadose zone that will that can be utilized in modeling potential Cr(VI) source terms, and 2) accelerating the Columbia River 100 area corridor cleanup by developing remedial action based on a fundamental understanding of Cr(VI) vadose zone geochemistry.

Electronic spin-pairing transition of iron in magnesiow{umlt u}stite-(Mg,Fe)O has been recently studied with X-ray emission and M{umlt o}ssbauer spectroscopies under high pressures. While these studies reported a high-spin to low-spin transition of iron to occur at pressures above approximately 50 GPa, the width of the observed transition varies significantly. In particular, Kantor et al. reported that the transition in (Mg0.8,Fe0.2)O occurs over a pressure range of approximately 50 GPa in high-pressure M{umlt o}ssbauer measurements. To account for the discrepancy in the transition pressure, Kantor et al. reanalyzed the X-ray emission spectra by Lin et al. using a simple spectral decomposition method and claimed that X-ray emission measurements are also consistent with a spin crossover of iron at high pressures. Here we show that the proposed fitting method is inadequate to describe the X-ray emission spectrum of the low-spin FeS2 and would give an erroneous satellite peak (K{sub beta}') intensity, leading to an artificial high-spin component and, consequently, to invalid conclusions regarding the width of the pressure-induced transition in magnesiow{umlt u}stite. Furthermore, we compare Kantor's M{umlt o}ssbauer data with other recent high-pressure M{umlt o}ssbauer studies and show that the width of the transition can be simply explained by different experimental conditions …

Real-time archiving of mixed paper and digital collections presents challenges not encountered in the primarily paper environment. A few recent examples from the archives of the Stanford Linear Accelerator Center highlight obstacles encountered, and attempted and contemplated solutions.

The Neutralized Drift Compression Experiment (NDCX) at Lawrence Berkeley National Laboratory is exploring the physical limits of compression and focusing of ion beams for heating material to warm dense matter (WDM) and fusion ignition conditions. The NDCX is a beam transport experiment with several components at a scale comparable to an inertial fusion energy driver. The NDCX is an accelerator which consists of a low-emittance ion source, high-current injector, solenoid matching section, induction bunching module, beam neutralization section, and final focusing system. The principal objectives of the experiment are to control the beam envelope, demonstrate effective neutralization of the beam space-charge, control the velocity tilt on the beam, and understand defocusing effects, field imperfections, and limitations on peak intensity such as emittance and aberrations. Target heating experiments with space-charge dominated ion beams require simultaneous longitudinal bunching and transverse focusing. A four-solenoid lattice is used to tune the beam envelope to the necessary focusing conditions before entering the induction bunching module. The induction bunching module provides a head-to-tail velocity ramp necessary to achieve peak axial compression at the desired focal plane. Downstream of the induction gap a plasma column neutralizes the beam space charge so only emittance limits the focused beam …

Annual Illness and Injury Surveillance Program report for 2003 for the East Tennessee Technology Park (K-25).The U.S. Department of Energy’s (DOE) commitment to assuring the health and safety of its workers includes the conduct of epidemiologic surveillance activities that provide an early warning system for health problems among workers. The Illness and Injury Surveillance Program monitors illnesses and health conditions that result in an absence of workdays, occupational injuries and illnesses, and disabilities and deaths among current workers.