We present the results of measurements of the angular distribution of fission fragments produced by irradiation of Au{sup 197} and Bi{sup 209} with various heavy ions. The projectiles, B{sup 11}, C{sup 12}, N{sup 14}, and O{sup 16}, had energies from a few MeV above the Coulomb barrier to 10.4 MeV per nucleon. The gross features of these results can be explained by use of a model and parameters that have been used by others to account for angular distributions of fission fragments from helium-ion bombardments. In detail, however, these results appear to indicate that the models used to predict the average value of the angular momentum of the compound nucleus give values too low near the Coulomb barrier. Furthermore, at high bombarding energies it is necessary to consider the fact that appreciable direct interaction is taking place.

None

Berkeley Lab operates facilities where radionuclides are handled and stored. These facilities are subject to the U.S. Environmental Protection Agency (EPA) radioactive air emission regulations in Code of Federal Regulations (CFR) Title 40, Part 61, Subpart H (EPA 1989). Radionuclides may be emitted from stacks or vents on buildings where radionuclide production or use is authorized or they may be emitted as diffuse sources. In 2008, all Berkeley Lab sources were minor sources of radionuclides (sources resulting in a potential dose of less than 0.1 mrem/yr [0.001 mSv/yr]). These minor sources include more than 100 stack sources and one source of diffuse emissions. There were no unplanned emissions from the Berkeley Lab site. Emissions from minor sources (stacks and diffuse emissions) either were measured by sampling or monitoring or were calculated based on quantities used, received for use, or produced during the year. Using measured and calculated emissions, and building-specific and common parameters, Laboratory personnel applied the EPA-approved computer code, CAP88-PC, to calculate the effective dose equivalent to the maximally exposed individual (MEI). The effective dose equivalent from all sources at Berkeley Lab in 2008 is 5.2 x 10{sup -3} mrem/yr (5.2 x 10{sup -5} mSv/yr) to the MEI, well …

As part of the global synthesis effort sponsored by the Global Carbon Cycle project of the National Oceanic and Atmospheric Administration (NOAA) and U.S. Department of Energy, a comprehensive comparison was performed of inorganic carbon parameters measured on oceanographic surveys carried out under auspices of the Joint Global Ocean Flux Study and related programs. Many of the cruises were performed as part of the World Hydrographic Program of the World Ocean Circulation Experiment and the NOAA Ocean-Atmosphere Carbon Exchange Study. Total dissolved inorganic carbon (DIC), total alkalinity (TAlk), fugacity of CO{sub 2}, and pH data from twenty-three cruises were checked to determine whether there were systematic offsets of these parameters between cruises. The focus was on the DIC and TAlk state variables. Data quality and offsets of DIC and TAlk were determined by using several different techniques. One approach was based on crossover analyses, where the deep-water concentrations of DIC and TAlk were compared for stations on different cruises that were within 100 km of each other. Regional comparisons were also made by using a multiple-parameter linear regression technique in which DIC or TAlk was regressed against hydrographic and nutrient parameters. When offsets of greater than 4 {micro}mol/kg were observed …

The separations plants operated on schedule, and Pu production exceeded commitment. UO{sub 3} production and shipments were also ahead of schedule. Purex operation under pseudo two-cycle conditions (elimination of HS and 1A columns, co-decontamination cycle concentrator HCP) was successful. Final U stream was 3{times} lower in Pu than ever before; {gamma} activity in recovered HNO{sub 3} was also low. Four of 6 special E metal batches were processed through Redox and analyzed. Boric acid is removed from solvent extraction process via aq waste. The filter in Task II hydrofluorinator was changed from carbon to Poroloy. Various modifications to equipment were made.

In the mature chorion, one of the membranes that exist during pregnancy between the developing fetus and mother, human placental cells form highly specialized tissues composed of mesenchyme and floating or anchoring villi. Using fluorescence in situ hybridization, we found that human invasive cytotrophoblasts isolated from anchoring villi or the uterine wall had gained individual chromosomes; however, chromosome losses were detected infrequently. With chromosomes gained in what appeared to be a chromosome-specific manner, more than half of the invasive cytotrophoblasts in normal pregnancies were found to be hyperdiploid. Interestingly, the rates of hyperdiploid cells depended not only on gestational age, but were strongly associated with the extraembryonic compartment at the fetal-maternal interface from which they were isolated. Since hyperdiploid cells showed drastically reduced DNA replication as measured by bromodeoxyuridine incorporation, we conclude that aneuploidy is a part of the normal process of placentation potentially limiting the proliferative capabilities of invasive cytotrophoblasts. Thus, under the special circumstances of human reproduction, somatic genomic variations may exert a beneficial, anti-neoplastic effect on the organism.

Previous studies have found that organic acids, organic bases, and detergent-like chemicals change surface wettability. The wastewater and NAPL mixtures discharged at the Hanford site contain such chemicals, and their proportions likely change over time due to reaction-facilitated aging. The specific objectives of this work were to (1) determine the effect of organic chemical mixtures on surface wettability, (2) determine the effect of organic chemical mixtures on CCl4 volatilization rates from NAPL, and (3) accurately determine the migration, entrapment, and volatilization of organic chemical mixtures. Five tasks were proposed to achieve the project objectives. These are to (1) prepare representative batches of fresh and aged NAPL-wastewater mixtures, (2) to measure interfacial tension, contact angle, and capillary pressure-saturation profiles for the same mixtures, (3) to measure interphase mass transfer rates for the same mixtures using micromodels, (4) to measure multiphase flow and interphase mass transfer in large flow cell experiments, all using the same mixtures, and (5) to modify the multiphase flow simulator STOMP in order to account for updated P-S and interphase mass transfer relationships, and to simulate the impact of CCl4 in the vadose zone on groundwater contamination. Results and findings from these tasks and summarized in the attached …

The goal of this research is to develop catalysts that directly convert methane and light hydrocarbons to intermediates that can, as economics dictate, be subsequently converted either to liquid fuels or value-added chemicals. In this program we are exploring two approaches to developing such catalysts. The first approach consists of developing advanced catalysts for reforming methane. We will prepare the catalysts by reacting organometallic complexes of transition metals (Fe, Ru, Rh, and Re) with zeolitic and rare-earth-exchanged zeolitic supports to produce surfaceconfined metal complexes in the zeolite pores. Our second approach entails synthesizing the porphyrin and phthalocyanine complexes of Cr, Mn, Ru, Fe, and/or Co within the pores of zeolitic supports for use as selective oxidation catalysts for methane and light hydrocarbons. During the second quarter of this project, we concentrated on methane reforming. Two ruthenium clusters (Ru{sub 4} and Ru{sub 6}) supported on three types of support materials ({beta}-alumina, 5 {Angstrom} molecular sieves, and {gamma}-zeolite) were tested for methane reforming. The effects of cluster size, supporting material, and reaction conditions were evaluated. The methane conversions range from 1.74 to 10.11% at 750{degrees}C. The reaction product contains hydrogen, C{sub 2} hydrocarbons, and C{sub 6} or higher hydrocarbons. Up to 48.34% …

Stockpile stewardship requires a high-end computing capacity complemented with a balance of memory capacity and bandwidth, interconnect bandwidth, local and global disk capacity and bandwidth, network bandwidth, and archival capacity and bandwidth. This appendix will provide a detailed analysis that will identify technical issues arising from various user interactions with a computer with a peak capacity of 10 TFLOPs and with 5TB of memory.

This is the first of a series of monthly reports covering details of the work of the Engineering Group of the Pile Technology Section of the Technical Department. The monthly Slug Inspection Report is being discontinued as a separate document and is being incorporated in this group report. Included is work on corrosion and blistering; graphite expansion; and irradiation studies.

Production of Pu from separations plants was only 58% of April commitment because of Purex difficulties. UO{sub 3} production, shipments met schedules. Pu shape production and shipments exceeded forecast by 14%. Purex HS column, repaired Oct 1958, developed another leak and was bypassed April 18, resulting in Pu and U that required reprocessing. A Palm recovery run at Purex with all- reducing flowsheet, resulted in 87% recovery and excellent decontamination of product. The prototype dual-pass silver reactor in Purex C-cell plugged with offgases. Processing of unclarified feed through Purex solvent extraction continued. Redox dissolver batch sizes for E-metal processing were increased from 1.75 to 2.0 tons. Testing of first extraction cycle acidic flowsheet at Redox continued, with Np losses to HAW being below detection limit. Ru in 1AFS stream increased 10-fold F.P. activity but was removed in acid deficient U cycles. A sulfamic acid process is being explored for dissolving Pu metal. Scope design of Redox dissolver and RMA line replacement at Z plant was completed. Shielding effectiveness of medium and high density x-ray lead glass was compared.

The United States produced just over 1 billion short tons of coal in 1992, 0.4 percent more than in 1991. Most of the 4-million-short-ton increase in coal production occurred west of the Mississippi River, where a record level of 408 million short tons of coal was produced. The amount of coal received by domestic consumers in 1992 totaled 887 million short tons. This was 7 million short tons more than in 1991, primarily due to increased coal demand from electric utilities. The average price of delivered coal to each sector declined by about 2 percent. Coal consumption in 1992 was 893 million short tons, only 1 percent higher than in 1991, due primarily to a 1-percent increase in consumption at electric utility plants. Consumer coal stocks at the end of 1992 were 163 million short tons, a decrease of 3 percent from the level at the end of 1991, and the lowest year-end level since 1989. US coal exports fell 6 percent from the 1991 level to 103 million short tons in 1992. Less coal was exported to markets in Europe, Asia, and South America, but coal exports to Canada increased 4 million short tons.

In support of its assigned missions and because of the importance of avoiding nuclear criticality accidents, DOE has adopted a policy to reduce identifiable nuclear criticality safety risks and to protect the public, workers, government property and essential operations from the effects of a criticality accident. In support of this policy, the Los Alamos Critical Experiments Facility (LACEF) at the Los Alamos National Laboratory (LANL) Technical Area (TA) 18, provides a program of general purpose critical experiments. This program, the only remaining one of its kind in the United States, seeks to maintain a sound basis of information for criticality control in those physical situations that DOE will encounter in handling and storing fissionable material in the future, and ensuring the presence of a community of individuals competent in practicing this control.

This document presents a summary of work and progress at the Hanford Engineer Works for April 1956. The report is divided into sections by department. A plant wide general summary is included at the beginning of the report, after which the departmental summaries begin. The Manufacturing Department reports plant statistics, and summaries for the Metal Preparation, Reactor and Separation sections. The Engineering Department`s section summaries work for the technical, design and project sections. Costs for the various departments are presented in the financial department`s summary. The Medical, Radiological Sciences, Utilities and General Services, Employee and Public Relations, and Community Real Estate and Service departments have sections presenting their monthly statistics, work, progress, and summaries.

This document details activities of the irradiation processing department during the month of April, 1959. A general summary is included at the start of the report, after which the report is divided into the following sections: Research and engineering operations; production and reactor operations; facilities engineering operation; employee relations operation; and financial operation.

This document details activities of the irradiation processing department during the month of April 1957. A general summary is included at the start of the report, after which the report is divided into the following sections: research and engineering operations; production and reactor operations; facilities engineering operation; employee relations operation; and financial operation.

To identify which ash characteristics can lead to problems with filtration, the authors have assembled 235 ash samples from eleven facilities involved in METC`s HGCU program. They have analyzed many of these ashes with a variety of laboratory tests. Physical attributes of the particles that they have examined include size distribution, specific surface area, particle morphology, and bulk ash cohesivity and permeability. They have also performed a range of chemical analyses on these ashes, as well as characterizations of agglomerates of ash removed from filter vessels at Tidd and Karhula. They are in the process of assembling the data obtained in these studies into an interactive data base which will help the manufacturers and operators of high-temperature barrier filters tailor their designs and operations to the specific characteristics of the ashes they are collecting. In order to understand the thermal and mechanical behavior of the various types of ceramic materials used in hot gas filtration, they have been performing hoop and axial tensile tests, thermal expansion, compression, and creep evaluations of these materials at temperatures up to 1,800 F. Nondestructive testing methods they perform on filter specimens include density and ultrasonic velocity. To date they have evaluated various characteristics of …

Several million cubic feet of hazardous and radioactive waste was buried in shallow pits and trenches within many US Department of Energy (US DOE) sites. The pits and trenches were constructed similarly to municipal landfills with both stacked and random dump waste forms such as barrels and boxes. Many of the hazardous materials in these waste sites are migrating into groundwater systems through plumes and leaching. On-site containment is one of the options being considered for prevention of waste migration. This report describes the results of a proof-of-principle test conducted to demonstrate technology for containing waste. This proof-of-principle test, conducted at the RAHCO International, Inc., facility in the summer of 1997, evaluated equipment techniques for cutting a horizontal slot beneath an existing waste site. The slot would theoretically be used by complementary equipment designed to place a cement barrier under the waste. The technology evaluated consisted of a slot cutting mechanism, muck handling system, thrust system, and instrumentation. Data were gathered and analyzed to evaluate the performance parameters.

The Urban Consortium (UC), created by PTI, is a network of jurisdictions with populations of over 250,000. The UC provides a platform for research and enterprise through its Energy, Environmental, Transportation, and Telecommunications and Information Task Forces. The UC provides a unique creative forum where elected and appointed officials and technical managers identify, test, and validate practical ways to improve the provision of public services and, where possible, generate new revenue opportunities. Public Technology, Inc., is the non-profit technology organization of the National League of Cities, the National Association of Counties, and the International City/County Management Association. PTI creates and advances technology-based products, services, and enterprises in cities and counties nationwide. Staffed by PTI, the UC addresses the critical needs of local governments through its Task Forces. The Urban Consortium Energy Task Force (UCETF) program has, since its inception, acted as a laboratory to develop, test solutions and share the resulting products or management approaches with the wider audience of local governments. It has addressed the overlap between energy and environment and economic development policy issues, and, is the nation's most extensive cooperative local government program to improve energy management and decision-making through applied research and technology cooperation. Proposals to …