The following information about the Savannah River is tabulated: significant activities and discharges along the Savannah River, river water temperature data near Jackson st Savannah River Plant, flow informatiom, and reservoir parameters for Clarks Hill, Richard B. Russell and Hartwell reservoirs.

None

None

None

A test was performed on June 19, 1959 to determine the capacity of the Core Removal Cooling System for removing reactor decay heat under split-flow'' conditions. The system operated satisfactorily during this test; the pumps developed a flow of approximates 73 gpm at a total head of 254 ft water, as compared with their rated capacity of 75 gpm at a total head of 250 ft water. (D.L.C.)

The design and implementation of the downhole portion of a measuring system for gamma rays is presented. Included are three alternative designs for radiation-resistant collimating and condensing lenses, sample cells, turning mirrors, and fiber-optic termination techniques. Also discussed are mechanical mounts and positioners, shielding, alignment, test methods, and field installation. Some general design suggestions for optical systems in adverse environments are also presented.

The basic objectives of this program were the determination of the thermal stability of various fission product oxides and nitrates, and an investigation of the gas phase decomposition of ruthenium tetroxide. To accomplish these objectives, a literature survey was flrst made of available physical and chemical data for the oxides and nitrates of Cs, Sr, Ru, Zr, Nb, and Ce. The data were supplemented by a calculation of thermodynamic functions for RuO/sub 4/ vapor from the experimentally determined infrared spectrum and the theoretically calculated raman-active fundamentals. Data are presented graphically. (C.H.)

More than thirty-seven design concepts have been proposed for terrestrial ICF power plants. The design space is large because of the many allowable driver and reaction chamber combinations. These design studies have illustrated advantages of ICF power plants over other sources in lower impact on the environment, high safety, and almost no dependence on consumables like fuel. The fact that, once built, a 1000 MW/sub e/ ICF power plant would require only 240 kg of deuterium and from 770 to 9260 kg of lithium to run for five years (at 70% capacity factor) makes it potentially attractive for space power also. However, the designs proposed to date have emphasized features that would make the plant attractive for terrestrial applications, where economics, efficiency, and environmental considerations dominate. The resulting plants are large and contain many very heavy components that would not be at attractive for space applications. In this paper, we evaluate alternative ICF driver and reactor technologies using space application criteria and also discuss how some of those technologies can be altered to produce smaller, lighter fusion power sources for space.

The purpose of this project is to create a comfortable, low-cost heating system for a single-family house, without dependence on non-renewable energy sources. I have attempted to combine a simple solar air-heating collector with the thermal envelop concept (for thermal air circulation) and massive interior stone walls for heat storage. All building materials, with the exception of the solar glazing material and certain other solar components, are inexpensive and locally produced. Examples are: rough-cut hardwood lumber, sandstone (free for the gathering), galvanized roofing for absorberplate, concrete, concrete block, and cellulose insulation. The collector has operated with a relatively high degree of efficiency, though three 0.6 amp duct fans had to be installed in order to increase air circulation. The interior stonework has provided more than adequate heat storage, along with even heat radiation throughout cloudy periods. My main problem has been heat loss around the foundation.

The U.S. Department of Energy’s (DOE) commitment to assuring the health and safety of its workers includes the conduct of illness and injury surveillance activities that provide an early warning system to detect health problems among workers. The Illness and Injury Surveillance Program monitors illnesses and health conditions that result in an absence, occupational injuries and illnesses, and disabilities and deaths among current workers.

None

None

Knowledge of the thermophysical properties of materials at extreme pressure and temperature conditions is essential for improving our understanding of many planetary and detonation processes. Significant gaps in what is known about the behavior of materials at high density and high temperature exist, largely due to the limitations and dangers of performing experiments at the necessary extreme conditions. Modeling these systems through the use of equations of state and particle-based simulation methods significantly extends the range of pressures and temperatures that can be safely studied. The reliability of such calculations depends on the accuracy of the models used. Here we present an assessment of the united-atom version of the TraPPE (Transferable Potentials for Phase Equilibria) force field and single-site exp-6 representations for methane, methanol, oxygen, and ammonia at extreme conditions. As shown by Monte Carlo simulations in the isobaric-isothermal ensemble, the TraPPE models, despite being parameterized to the vapor-liquid coexistence curve (i.e. relatively mild conditions), perform remarkably well in the high pressure/high temperature regime. The single-site exp-6 models can fit experimental data in the high pressure/temperature regime very well, but the parameters are less transferable to ambient conditions.

The King County Wastewater Treatment Division (WTD) have concern about the aftermath of a radiological dispersion event (RDE) leading to the introduction of significant quantities of radioactive material into its combined sanitary and storm sewer system. Radioactive material could come from the use of a radiological dispersion device (RDD). RDDs include "dirty bombs" that are not nuclear detonations but are explosives designed to spread radioactive material. Radioactive material also could come from deliberate introduction or dispersion of radioactive material into the environment, including waterways and water supply systems. Volume 2 of PNNL-15163 assesses the radiological instrumentation needs for detection of radiological or nuclear terrorism, in support of decisions to treat contaminated wastewater or to bypass the West Point Treatment Plant (WPTP), and in support of radiation protection of the workforce, the public, and the infrastructure of the WPTP. Fixed radiation detection instrumentation should be deployed in a defense-in-depth system that provides 1) early warning of significant radioactive material on the way to the WPTP, including identification of the radionuclide(s) and estimates of the soluble concentrations, with a floating detector located in the wet well at the Interbay Pump Station and telemetered via the internet to all authorized locations; 2) monitoring …

An Integrated Circuit (IC) readout chip with four channels arranged so as to receive input charge from the corners of the chip was designed for use with 5- to 7-mm pixel detectors. This Application Specific IC (ASIC) can be used for cold neutron imaging, for study of structural order in materials using cold neutron scattering or for particle physics experiments. The ASIC is fabricated in a 0.5-{micro}m n-well AMI process. The design of the ASIC and the test measurements made is reported. Noise measurements are also reported.

We employ Runs 1-4 off-peak data sample (about 21.5 fb{sup -1}) to produce the current world-best spectra and production rates measurements for three strangely-flavored baryons: the {Lambda} hyperon, the cascade hyperon, and the {Omega} hyperon. These improved measurements shall enable theoretical and phenomelogical workers to generate more realistic models for the hadronization process, currently one of the unresolved problem areas in the standard model of particle physics. This analysis was conducted using codes from release 16 series. We report the production rate at 10.54 GeV for the {Lambda} as 0.0900 {+-} 0.0006(stat.) {+-} 0.0039(sys.) per hadronic event. Our measured production rate at the same energy for the cascade hyperon is 0.00562 {+-} 0.00013(stat.) {+-} 0.00045(sys.) per hadronic event, while that for the {Omega} hyperon is 0.00027 {+-} 0.00004(stat.) {+-} 0.0008(sys.) per hadronic event. The spectral measurements for the respective particles also constitute current world-best measurements.

Mobile agent technology facilitates intelligent operation insoftware systems with less human interaction. Major challenge todeployment of mobile agents include secure transmission of agents andpreventing unauthorized access to resources between interacting systems,as either hosts, or agents, or both can act maliciously. The Anchortoolkit, designed by LBNL, handles the transmission and secure managementof mobile agents in a heterogeneous distributed computing environment. Itprovides users with the option of incorporating their security managers.This paper concentrates on the architecture, features, access control anddeployment of Anchor toolkit. Application of this toolkit in a securedistributed CVS environment is discussed as a case study.

Using 230 million B{bar B} events recorded with the BABAR detector at the e{sup +}e{sup -} storage rings PEP-II, they reconstruct approximately 4100 B{sup 0} {yields} J/{psi} K{sup +}{pi}{sup -} and 9930 B{sup +} {yields} J/{psi}K{sup +} decays with J/{psi} {yields} {mu}{sup +}{mu}{sup -} and e{sup +} e{sup -}. From the measured B-momentum distributions in the e{sup +}e{sup -} rest frame, they determine the mass difference m(B{sup 0}) - m(B{sup +}) = (+0.33 {+-} 0.05 {+-} 0.03) MeV/c{sup 2}.

New techniques for improving both the computational andimaging performance of the three dimensional (3D) electromagnetic inverseproblem are presented. A non-linear conjugate gradient algorithm is theframework of the inversion scheme. Full wave equation modelling forcontrolled sources is utilized for data simulation along with anefficient gradient computation approach for the model update. Improvingthe modelling efficiency of the 3D finite difference method involves theseparation of the potentially large modelling mesh, defining the set ofmodel parameters, from the computational finite difference meshes usedfor field simulation. Grid spacings and thus overall grid sizes can bereduced and optimized according to source frequencies and source-receiveroffsets of a given input data set. Further computational efficiency isobtained by combining different levels of parallelization. While theparallel scheme allows for an arbitrarily large number of parallel tasks,the relative amount of message passing is kept constant. Imageenhancement is achieved by model parameter transformation functions,which enforce bounded conductivity parameters and thus prevent parameterovershoots. Further, a remedy for treating distorted data within theinversion process is presented. Data distortions simulated here includepositioning errors and a highly conductive overburden, hiding the desiredtarget signal. The methods are demonstrated using both synthetic andfield data.

The U.S. Department of Energy Advanced Fuel Cycle Initiative (AFCI) is sponsoring a project at Oak Ridge National Laboratory with the objective of conducting the research and development necessary to evaluate the use of sphere-pac transmutation fuel. Sphere-pac fuels were studied extensively in the 1960s and 1970s. More recently, this fuel form is being studied internationally as a potential plutonium-burning fuel. For transmutation fuel, sphere-pac fuels have potential advantages over traditional pellet-type fuels. This report provides a review of development efforts related to the preparation of sphere-pac fuels and their irradiation tests. Based on the results of these tests, comparisons with pellet-type fuels are summarized, the advantages and disadvantages of using sphere-pac fuels are highlighted, and sphere-pac options for the AFCI are recommended. The Oak Ridge National Laboratory development activities are also outlined.

NMR spectroscopy conveys information about chemical structure through ppm-scale shifts of the resonance frequency depending on the chemical environment. In order to observe these small shifts, magnets with highly homogeneous magnetic field B{sub 0} are used. The high cost and large size of these magnets are a consequence of the requirement for high homogeneity. In this contribution we introduce a new method for recording high-resolution NMR spectra from samples in inhomogeneous B{sub 0}, opening up the possibility of exploiting magnets of lower homogeneity and cost. Instead of using the traditional B{sub 0} ''shim coils'', adiabatic radiofrequency (RF) pulse sequences and modulated B{sub 0} gradients generated by coils in the probe are used to produce ''shim pulses''. A great deal of work has been devoted to finding methods for retrieving chemical shift information even when B{sub 0} is inhomogeneous. One class of methods relies on zero- or multiple quantum coherences which evolve independently of B{sub 0}. These methods are inherently two-dimensional and the high-resolution information is obtained indirectly. In order to minimize experimental time it is desirable to acquire a high-resolution spectrum directly just as for traditional NMR in homogeneous fields. A further advantage with direct acquisition is that modification of …

The movement of high-specific-activity radioactive particles (i.e., alpha recoil) has been observed and studied since the early 1900s. These studies have been motivated by concerns about containment of radioactivity and the protection of human health. Additionally, studies have investigated the potential advantage of alpha recoil to effect separations of various isotopes. This report provides a review of the observations and results of a number of the studies.

None

We report here a comparative analysis of the genome sequence of Methanosarcina barkeri with those of Methanosarcina acetivorans and Methanosarcina mazei. All three genomes share a conserved double origin of replication and many gene clusters. M. barkeri is distinguished by having an organization that is well conserved with respect to the other Methanosarcinae in the region proximal to the origin of replication with interspecies gene similarities as high as 95%. However it is disordered and marked by increased transposase frequency and decreased gene synteny and gene density in the proximal semi-genome. Of the 3680 open reading frames in M. barkeri, 678 had paralogs with better than 80% similarity to both M. acetivorans and M. mazei while 128 nonhypothetical orfs were unique (non-paralogous) amongst these species including a complete formate dehydrogenase operon, two genes required for N-acetylmuramic acid synthesis, a 14 gene gas vesicle cluster and a bacterial P450-specific ferredoxin reductase cluster not previously observed or characterized in this genus. A cryptic 36 kbp plasmid sequence was detected in M. barkeri that contains an orc1 gene flanked by a presumptive origin of replication consisting of 38 tandem repeats of a 143 nt motif. Three-way comparison of these genomes reveals differing mechanisms …