The project had four parts: (1) Modeling and simulation of nonlinear dynamics in forced BWRs using reduced order models; (2) Modeling and simulation of nonlinear dynamics in natural circulation BWRs using reduced order models; (3) Comparison of results with those obtained using large scale system codes; and (4) Experiments to investigate natural circulation flashing phenomenon.

We report observation of a high performance scenario in the National Spherical Torus Experiment with very small edge-localized modes (ELMs). These ELMs have no measurable impact on stored energy and are consistent with high bootstrap current operation with line average density approaching Greenwald scaling. The ELM perturbation is observed to typically originate near the lower divertor region, as opposed to the outer midplane for ELMs described in the literature. If extrapolable, this scenario would provide an attractive operating regime for next step fusion experiments

A Solid State Neutral Particle Analyzer (SSNPA) array has been installed on the National Spherical Torus Experiment (NSTX). The array consists of four chords viewing through a common vacuum flange. The tangency radii of the viewing chords are 60, 90, 100, and 120 cm. They view across the three co-injection neutral beam lines (deuterium, 80 keV (typ.) with tangency radii 48.7, 59.2, and 69.4 cm) on NSTX and detect co-going energetic ions. A silicon photodiode used was calibrated by using a mono-energetic deuteron beam source. Deuterons with energy above 40 keV can be detected with the present setup. The degradation of the performance was also investigated. Lead shots and epoxy are used for neutron shielding to reduce handling any hazardous heavy metal. This method also enables us to make an arbitrary shape to be fit into the complex flight tube.

Coherent oscillations with frequency 0.3 {le} {omega}/{omega}{sub ci} {le} 1, are seen in the National Spherical Torus Experiment [M. Ono, S.M. Kaye, Y-K.M. Peng, et al., Nucl. Fusion 40, 557 (2000)]. This paper presents new data and analysis comparing characteristics of the observed modes to the model of compressional Alfven eigenmodes (CAE). The toroidal mode number has been measured and is typically between 7 < n < 9. The polarization of the modes, measured using an array of four Mirnov coils, is found to be compressional. The frequency scaling of the modes agrees with the predictions of a numerical 2-D code, but the detailed structure of the spectrum is not captured with the simple model. The fast ion distribution function, as calculated with the beam deposition code in TRANSP [R.V. Budny, Nucl. Fusion 34, 1247 (1994)], is shown to be qualitatively consistent with the constraints of the Doppler-shifted cyclotron resonance drive model. This model also predicts the observed scaling of the low frequency limit for CAE.

All properties of molecules, from binding and excitation energies to their geometry, are determined by the highly correlated initial state wavefunction of the electrons and nuclei. Perhaps surprisingly, details of these correlations can be revealed by studying the break-up of these systems into their constituents. The fragmentation might be initiated by the absorption of a single photon [1, 2, 3, 4, 5, 6], collision with a charged particle [7, 8] or exposure to a strong laser pulse [9, 10]. If the exciting interaction is sufficiently understood, one can use the fragmentation process as a tool to learn about the bound initial state [11, 12]. However, often the interaction and the fragment motions pose formidable challenges to quantum theory [13, 14, 15]. Here we report the coincident measurement of the momenta of both nuclei and both electrons from the single photon induced fragmentation of the deuterium molecule. The results reveal that the correlated motion of the electrons is strongly dependent on the inter-nuclear separation in the molecular ground state at the instant of photon absorption.

High Harmonic Fast Wave (HHFW) heating experiments on NSTX have been observed to be accompanied by significant edge ion heating (T{sub i} >> T{sub e}). This heating is found to be anisotropic with T{sub perp} > T{sub par}. Simultaneously, coherent oscillations have been detected with an edge Langmuir probe. The oscillations are consistent with parametric decay of the incident fast wave ({omega} > 13{omega}{sub ci}) into ion Bernstein waves and an unobserved ion-cyclotron quasi-mode. The observation of anisotropic heating is consistent with Bernstein wave damping, and the Bernstein waves should completely damp in the plasma periphery as they propagate toward a cyclotron harmonic resonance. The number of daughter waves is found to increase with rf power, and to increase as the incident wave's toroidal wavelength increases. The frequencies of the daughter wave are separated by the edge ion cyclotron frequency. Theoretical calculations of the threshold for this decay in uniform plasma indicate an extremely small value of incident power should be required to drive the instability. While such decays are commonly observed at lower harmonics in conventional ICRF heating scenarios, they usually do not involve the loss of significant wave power from the pump wave. On NSTX an estimate of …

Ophir Corporation was awarded a contract by the U. S. Department of Energy, National Energy Technology Laboratory under the Project Title ''Airborne, Optical Remote Sensing of Methane and Ethane for Natural Gas Pipeline Leak Detection'' on October 14, 2002. This six-month technical report summarizes the progress for each of the proposed tasks, discusses project concerns, and outlines near-term goals. Ophir has completed a data survey of two major natural gas pipeline companies on the design requirements for an airborne, optical remote sensor. The results of this survey are disclosed in this report. A substantial amount of time was spent on modeling the expected optical signal at the receiver at different absorption wavelengths, and determining the impact of noise sources such as solar background, signal shot noise, and electronic noise on methane and ethane gas detection. Based upon the signal to noise modeling and industry input, Ophir finalized the design requirements for the airborne sensor, and released the critical sensor light source design requirements to qualified vendors. Responses from the vendors indicated that the light source was not commercially available, and will require a research and development effort to produce. Three vendors have responded positively with proposed design solutions. Ophir has …

'A series of subcritical noise measurements were performed on fresh and spent University of Missouri Research Reactor fuel assemblies. These experimental measurements were performed for the purposes of providing benchmark quality data for validating transport theory computer codes and nuclear cross-section data used to perform criticality safety analyses for highly enriched, uranium-aluminum Material Test Reactor fuel assemblies. A mechanical test rig was designed and built to hold up to four fuel assemblies and neutron detectors in a subcritical array. The rig provided researchers with the ability to evaluate the reactivity effects of variable fuel/detector spacing, fuel rotation, and insertion of metal reflector plates into the lattice.'

GEMINI (Geo-Engineering Modeling through Internet Informatics) is a public-domain web application focused on analysis and modeling of petroleum reservoirs and plays (http://www.kgs.ukans.edu/Gemini/index.html). GEMINI creates a virtual project by ''on-the-fly'' assembly and analysis of on-line data either from the Kansas Geological Survey or uploaded from the user. GEMINI's suite of geological and engineering web applications for reservoir analysis include: (1) petrofacies-based core and log modeling using an interactive relational rock catalog and log analysis modules; (2) a well profile module; (3) interactive cross sections to display ''marked'' wireline logs; (4) deterministic gridding and mapping of petrophysical data; (5) calculation and mapping of layer volumetrics; (6) material balance calculations; (7) PVT calculator; (8) DST analyst, (9) automated hydrocarbon association navigator (KHAN) for database mining, and (10) tutorial and help functions. The Kansas Hydrocarbon Association Navigator (KHAN) utilizes petrophysical databases to estimate hydrocarbon pay or other constituent at a play- or field-scale. Databases analyzed and displayed include digital logs, core analysis and photos, DST, and production data. GEMINI accommodates distant collaborations using secure password protection and authorized access. Assembled data, analyses, charts, and maps can readily be moved to other applications. GEMINI's target audience includes small independents and consultants seeking to find, quantitatively …

It is well established that the high fluences of fast neutrons likely to be encountered in the environments of fusion reactors or fusion materials test facilities will generate substantial quantities of helium (both {sup 4}He and {sup 3}He isotopes), and that the presence of this gas in bulk material can produce serious damage in engineering structures due to swelling. The present study was undertaken to survey the current status (as of early 2004) of the available fast neutron cross section information for helium production in several major structural elements of interest for the development of fusion energy systems. The scope of this study encompasses both compiled experimental cross section data and evaluated cross sections available from major nuclear data libraries used in the analysis of fusion systems. The main conclusion from this work is that the contemporary knowledge of those individual neutron reaction cross sections important for helium production is, in general, very inadequate for the purpose of producing reliable designs for fusion reactors (e.g., ITER) and materials irradiation test facilities (e.g., IFMIF). Since the number of distinct neutron reactions that must be considered is large, and the capabilities (both experimental and theoretical) of the nuclear physics community to adequately …

'The Plutonium Immobilization Facility will encapsulate plutonium in ceramic pucks and seal the pucks inside welded cans. Remote equipment will place these cans in magazines and the magazines in a Defense Waste Processing Facility (DWPF) canister. The DWPF will fill the canister with glass for permanent storage. This report discusses the Plutonium Immobilization can loading conceptual design and includes a process block diagram, process description, preliminary equipment specifications, and several can loading issues. This report identifies loading pucks into cans and backfilling cans with helium as the top priority can loading development areas.'

This paper provides a description of the remote ultrasonic examinations of a high level radioactive waste storage tank at the Savannah River Site. The inspections were performed from the contaminated, annular space of the 46 year old, inactive, 1.03 million gallon waste storage tank.

This report summarizes a 12-year program of various kinds of synchrotron spectroscopies directed at the electronic structures of narrow band and low-dimensional materials that display correlated electron behaviors such as metal-insulator transitions, mixed valence, superconductivity, Kondo moment quenching, heavy Fermions, and non-Fermi liquid properties.

Dynamic Information Architecture System (DIAS) is a flexible, extensible, object-based framework for developing and maintaining complex multidisciplinary simulations of a wide variety of application contexts. The modeling domain of a specific DIAS-based simulation is determined by (1) software Entity (domain-specific) objects that represent the real-world entities that comprise the problem space (atmosphere, watershed, human), and (2) simulation models and other data processing applications that express the dynamic behaviors of the domain entities. In DIAS, models communicate only with Entity objects, never with each other. Each Entity object has a number of Parameter and Aspect (of behavior) objects associated with it. The Parameter objects contain the state properties of the Entity object. The Aspect objects represent the behaviors of the Entity object and how it interacts with other objects. DIAS extends the ''Object'' paradigm by abstraction of the object's dynamic behaviors, separating the ''WHAT'' from the ''HOW.'' DIAS object class definitions contain an abstract description of the various aspects of the object's behavior (the WHAT), but no implementation details (the HOW). Separate DIAS models/applications carry the implementation of object behaviors (the HOW). Any model deemed appropriate, including existing legacy-type models written in other languages, can drive entity object behavior. The DIAS …

A source release model was developed to determine the release of contaminants into the shallow subsurface, as part of the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) evaluation at the Idaho National Engineering and Environmental Laboratory's (INEEL) Subsurface Disposal Area (SDA). The output of the source release model is used as input to the subsurface transport and biotic uptake models. The model allowed separating the waste into areas that match the actual disposal units. This allows quantitative evaluation of the relative contribution to the total risk and allows evaluation of selective remediation of the disposal units within the SDA.

The Department of Energy selected caustic-side solvent extraction (CSSX) as the preferred cesium-removal technology for SRS high-level waste. In the pretreatment step of the CSSX flowsheet, the incoming salt solution, which contains entrained sludge, is contacted with MST to adsorb strontium and selected actinides. An alternative approach replaces MST with the addition of sodium permanganate, strontium nitrate, and hydrogen peroxide. The pretreatment operation then filters the resulting slurry to remove the sludge and MST or manganese oxide and strontium carbonate solids. The filtrate receives further treatment in the solvent extraction system

Ultrafiltration and ion exchange are among the pretreatment processes selected for the WTP at the Hanford Site. This study is the second part of a two-part study on Evaluating the Effects of Tri-Butyl Phosphate and Normal Paraffin Hydrocarbon in Simulated Low-Activity Waste Solution on Ultrafiltration and Ion Exchange.

Three test instruments are being evaluated to determine the feasibility of using photo-acoustic technology for measuring unburned carbon in fly ash. The first test instrument is a single microwave frequency system previously constructed to measure photo-acoustic signals in an off-line configuration. This system was assembled and used to begin testing parameters thought to be influential in the resulting photo-acoustic signal output. A standard modulation frequency was chosen based upon signal to noise data gained from experimentation. Sample heterogeneity was tested and found not to be influential. Many other tests were performed during the second quarter. Preliminary results show that compression and photo-acoustic volume have an impact on photo-acoustic signal. Conclusions regarding the data for sample bulk density, temperature, humidity, moisture content, and linearity are pending further review. Conclusions for ambient temperature and humidity are pending further review as well. Simultaneously, a second instrument is to be constructed based in part on lessons learned with the first instrument, and to expand the capabilities of the first instrument. Improvements include a control loop to allow more constant microwave power output and an ability to operate over a range of microwave frequencies. To date, the design of the second instrument has been completed …

We report on a successful implementation of a wavelet based Poisson solver for use in 3D particle-in-cell (PIC) simulations. One new aspect of our algorithm is its ability to treat the general(inhomogeneous) Dirichlet boundary conditions (BCs). The solver harnesses advantages afforded by the wavelet formulation, such as sparsity of operators and data sets, existence of effective preconditioners, and the ability simultaneously to remove numerical noise and further compress relevant data sets. Having tested our method as a stand-alone solver on two model problems, we merged it into IMPACT-T to obtain a fully functional serial PIC code. We present and discuss preliminary results of application of the new code to the modeling of the Fermilab/NICADD and AES/JLab photoinjectors.

This second annual report summarizes the research performed from 17 April 2004 through 16 April 2005. Major portions of the research in several of the project's current eight tasks have been completed. We have successfully developed the meteorological inputs using the best possible modeling configurations, resulting in improved representation of atmospheric processes. The development of the variable-grid-resolution emissions model, SMOKE-VGR, is also completed. The development of the MAQSIP-VGR has been completed and a test run was performed to ensure the functionality of this air quality model. Thus, the project is on schedule as planned. During the upcoming reporting period, we expect to perform the first MAQSIP-VGR simulations over the Houston-Galveston region to study the roles of the meteorology, offshore emissions, and chemistry-transport interactions that determine the temporal and spatial evolution of ozone and its precursors.

The authors have studied the narrow (valley-ridge) structure in the {gamma}-ray spectrum following a heavy-ion fusion reaction that produces several ytterbium nuclei. The intensity of this structure can be quantitatively related to the average chaotic behavior in these nuclei and they have traced this behavior from nearly fully ordered to nearly fully chaotic.

The study of Alloy 22 has been undertaken in several selected nitrate/chloride (NO{sub 3}Cl{sup -}) electrolytes. These electrolytes include chloride concentrations [Cl{sup -}] of 1.0, 3.5 and 6.0 metal with NO{sub 3}/Cl{sup -} ratios of 0.05, 0.15 and 0.5 at various temperatures. Alloy 22 maintains is passivity in most industrial environments. As a result, it is highly desirable for numerous industrial applications including underground waste disposal systems. Alloy 22 possesses remarkably low general corrosion rates. It has exceptional resistance so localized corrosion including environmentally assisted cracking [1-7]. Alloy 22 (N06022) is a nickel(Ni)-alloy and contains 22% chromium (Cr), 13% molybdenum (Mo), 3% tungsten (W) and about 3% iron (Fe). The goal of this study was to determine the levels of NO{sub 3} required for effective inhibition of crevice corrosion at Alloy 22. To achieve this, carefully designed statistical cost matrices covering the selected range of CT compositions and temperatures were employed in carrying out the experiments. Specimens for three experiments were in the form of multiple crevice assemblies (MCA), optimized with 24 artificial crevice sites. Tests used in this investigation involved open circuit potential monitoring, polarization resistance, and cyclic polarization experiments. Potentiostatic polarization test were also employed.

This research used high-resolution magnetic field data to examine the interior structures of MHD shocks in interplanetary space and in the magnetotail; we discovered that a slow-mode shock is often followed by an adjoining rotational discontinuity layer on the postshock side. The thickness of each layer is of the order of a few ion inertial lengths. Such a compound structure is known as a double discontinuity. When the magnetic field rotates by several degrees per ion inertial length inside a thin layer, the Hall current term becomes important in the generalized Ohm's law. Steady state solutions based on the Hall-MHD theory have been obtained to show the merging of a rotational layer and a slow shock layer to form a compound structure like the observed double discontinuities.

Magnetohydrodynamic (MHD) surface waves on liquid gallium are studied theoretically and experimentally in the small magnetic Reynolds number limit. A linear dispersion relation is derived when a horizontal magnetic field and a horizontal electric current is imposed. No wave damping is found in the shallow liquid limit while waves always damp in the deep liquid limit with a magnetic field parallel to the propagation direction. When the magnetic field is weak, waves are weakly damped and the real part of the dispersion is unaffected, while in the opposite limit waves are strongly damped with shortened wavelengths. In a table-top experiment, planar MHD surface waves on liquid gallium are studied in detail in the regime of weak magnetic field and deep liquid. A non-invasive diagnostic accurately measures surface waves at multiple locations by reflecting an array of lasers off the surface onto a screen, which is recorded by an Intensified-CCD camera. The measured dispersion relation is consistent with the linear theory with a reduced surface tension likely due to surface oxidation. In excellent agreement with linear theory, it is observed that surface waves are damped only when a horizontal magnetic field is imposed parallel to the propagation direction. No damping is …