Advanced Research Projects Agency-Energy project sheet summarizing general information about a new program for hydrogen fuel cell vehicles (project title "Direct Wafer Enabling Terawatt Photovoltaics") including critical needs, innovation and advantages, impacts, and contact information. This sheet is the first open solicitation, announcing funding opportunities for involvement in the project.

OAK-B135 An overview of our work as well as two recent publications are contained in this scientific report. The work reported here revolves around the discovery of new coherent nonlinear kinetic waves in laser produced plasmas, we call KEEN waves (kinetic, electrostatic electron nonlinear waves), and optical mixing experiments on the Imega laser system at LLE with blue-green light for the exploration of ways to suppress parametric instabilities in long scale length, long pulsewidth laser-plasmas such as those which will be found on NIF or LMJ.

Advanced Research Projects Agency-Energy project sheet summarizing general information about a new program to engineer plants to produce enzymes that will reduce costs in the production of biofuel (project title "Conditionally Activated Enzymes Expressed in Cellulosic Energy Crops") including critical needs, innovation and advantages, impacts, and contact information. This sheet is the first open solicitation, announcing funding opportunities for involvement in the project.

None

Puzzling discrepancies between on the one hand quantum mechanical (QM) electron impact calculations of isolated ion lines and on the other hand experimental data and nonperturbative semiclassical (SC) calculations are reviewed. The origin of these discrepancies was a standard line-broadening literature estimate of the wavefunction extent. The nonperturbative semiclassical calculations are further improved by dropping the long-range approximation and allowing penetrating collisions. This results in excellent agreement with fully quantal calculations for the case of the BIII 2s-2p line. On the other hand the standard perturbative semiclassical method is inadequate even in this particular example, where perturbation theory is valid. Further, the assumption of neglecting the back-reaction in semiclassical calculations is examined.

Advanced Research Projects Agency-Energy project sheet summarizing general information about a new program to efficiently separate micro-solids from water (project title "Scaling and Commercialization of Algae Harvesting Technologies") including critical needs, innovation and advantages, impacts, and contact information. This sheet is the first open solicitation, announcing funding opportunities for involvement in the project.

A recommendation to eliminate all characterization of pour stream glass samples and the glass fabrication and Product Consistency Test (PCT) of the sludge batch qualification sample was made by a Six-Sigma team chartered to eliminate non-value-added activities for the Defense Waste Processing Facility (DWPF) sludge batch qualification program and is documented in the report SS-PIP-2006-00030. That recommendation was supported through a technical data review by the Savannah River National Laboratory (SRNL) and is documented in the memorandums SRNL-PSE-2007-00079 and SRNL-PSE-2007-00080. At the time of writing those memorandums, the DWPF was processing sludge-only waste but, has since transitioned to a coupled operation (sludge and salt). The SRNL was recently tasked to perform a similar data review relevant to coupled operations and re-evaluate the previous recommendations. This report evaluates the validity of eliminating the characterization of pour stream glass samples and the glass fabrication and Product Consistency Test (PCT) of the sludge batch qualification samples based on sludge-only and coupled operations. The pour stream sample has confirmed the DWPF's ability to produce an acceptable waste form from Slurry Mix Evaporator (SME) blending and product composition/durability predictions for the previous sixteen years but, ultimately the pour stream analysis has added minimal value to …

The advances in high-voltage switching developed in this project allow a camera user to rapidly vary the number of output frames from 1 to 25. A high-voltage, variable-amplitude pulse train shifts the deflection location to the new frame location during the interlude between frames, making multiple frame counts and locations possible. The final deflection circuit deflects to five different frame positions per axis, including the center position, making for a total of 25 frames. To create the preset voltages, electronically adjustable {+-}500 V power supplies were chosen. Digital-to-analog converters provide digital control of the supplies. The power supplies are clamped to {+-}400 V so as not to exceed the voltage ratings of the transistors. A field-programmable gated array (FPGA) receives the trigger signal and calculates the combination of plate voltages for each frame. The interframe time and number of frames are specified by the user, but are limited by the camera electronics. The variable-frame circuit shifts the plate voltages of the first frame to those of the second frame during the user-specified interframe time. Designed around an electrostatic image tube, a framing camera images the light present during each frame (at the photocathode) onto the tube’s phosphor. The phosphor persistence …

The invention is a door actuator and alignment apparatus for opening and closing the 15,000-pound horizontally sliding door of a storage overpack. The door actuator includes a ball screw mounted horizontally on a rigid frame including a pair of door panel support rails. An electrically powered ball nut moves along the ball screw. The ball nut rotating device is attached to a carriage. The carriage attachment to the sliding door is horizontally pivoting. Additional alignment features include precision cam followers attached to the rails and rail guides attached to the carriage.

None

The Department of Energy (DOE) has as two of its strategic objectives to safely accomplish the world's largest environmental clean-up of contaminated sites and the adoption of the best management practices of the private sector to achieve business-like results efficiently and effectively. An integral part of the strategic response to the challenges facing the Department has been the use of benchmarking and best practice management to facilitate identifying and implementing leading-edge thinking, practices, approaches, and solutions.

None

None

None

Se-intercalated graphite compounds (Se-GICs) are considered as promising candidates for room-temperature thermoelectric cooling devices. Here the authors analyze the crystallographic structure and electronic properties of these materials within the framework of density-functional theory. First, the Adaptive-Coordinate Real-space Electronic Structure (ACRES) code is used to determine the stable structure of a representative stage-2 Se-GIC by relaxing atomic positions. The stable configuration is found to be a pendant-type structure, in which each selenium is bonded covalently to two atoms within the same carbon layer, causing a local distortion of the in-plane conjugation of the graphite. Then, they use the full potential linearized augmented plane wave (FP-LAPW) method to calculate the electronic band structure of the material and discuss its properties. Near the Fermi energy E{sub F}, there are wide bands originating from the host graphitic electronic structure and a few very narrow bands mainly of Se 4p character. The latter bands contribute to high peaks in the density of states close to E{sub F}. They show that this feature, although typical of many good thermoelectrics, does not necessarily imply high thermopower in the case of Se-GICs.

This document is the format IV, final report for the tank 241-SY-102 (SY-102) grab samples taken in January 2000 to address waste compatibility concerns. Chemical, radiochemical, and physical analyses on the tank SY-102 samples were performed as directed in Comparability Grab Sampling and Analysis Plan for Fiscal Year 2000 (Sasaki 1999). No notification limits were exceeded. Preliminary data on samples 2SY-99-5, -6, and -7 were reported in ''Format II Report on Tank 241-SY-102 Waste Compatibility Grab Samples Taken in January 2000'' (Lockrem 2000). The data presented here represent the final results.

We document the discovery of two generating functions forzeta(2n+2), analogous to earlier work for zeta(2n+1) and zeta(4n+3),initiated by Koecher and pursued further by Borwein, Bradley andothers.

The Internal Dosimetry Department at the Y-12 Plant maintains a state-of-the-art bioassay program managed under the guidance and regulations of the Department of Energy. The two major bioassay techniques currently used at Y-12 are the in vitro (urinalysis) and in vivo (lung counting) programs. Fecal analysis (as part of the in vitro program) is another alternative; however, since both urine and fecal analysis provide essentially the same capabilities for detecting exposures to uranium, the urinalysis is the main choice primarily for aesthetic reasons. The bioassay frequency is based on meeting NCRP 87 objectives which are to monitor the accumulation of radioactive material in exposed individuals, and to ensure that significant depositions are detected.

Power conditioning systems for high peak and average power, high repetition rate discharge excited lasers involve operation of modulator components in unconventional regimes. Reliable operation of switches and energy storage elements under high voltage and high di/dt conditions is a pacing item for laser development at the present time. To test and evaluate these components a Modulator Component Test Facility (MCTF) was constructed. The MCTF consists of a command charge system, energy storage capacitors, thyratron switch with inverse thyratron protection, and a resistive load. The modulator has initially been operated at voltages up to 60 kV at 600 Hz. Voltage, current, and calorimetric diagnostics are provided for major modulator components. Measurements of thyratron characteristics under high di/dt operation are presented. Commutation energy loss and di/dt have been measured as functions of the tube hydrogen pressure.

The 13000 cfm 'emergency' vent fan must be protected from over cooling which would result in a mechanical failure. Over cooling could result from a catastrophic cryogen release from the cryostat(s) or Argon Storage Dewar. In order to protect the fan, a VPT has been calibrated for -31 C to open a switch which sends a signal to allow warm gas to enter the sump by means of a motor controlled louver installed at 'sidewalk level' in the ductwork between the assembly hall and the Argon Dewar Enclosure. The bulb of the VPT is enclosed in a thermal well and will be placed in the gas stream directly above the fan. The switching unit will be mounted nearby on the wall in order to isolate it from vibrational effects. Should the fan be activated due to a cryogen release, it should not experience any problems when operating above -40 C. The switch was set and checked in a saturated calcium chloride solution cooled to -31 C by running cold gaseous Nitrogen through a copper tube coiled in a dewar. Switching temperature was measured by a thermocouple tied to the VPT bulb. The thermocouple was checked in LN2, in an ice …

The chemical and electronic structure of high efficiency chalcopyrite thin film solar cell absorbers significantly differs between the surface and the bulk. While it is widely accepted that the absorber surface exhibits a Cu-poor surface phase with increased band gap (Eg), a direct access to the crucial information of the depth-dependency of Eg is still missing. In this paper, we demonstrate that a combination of x-ray emission and absorption spectroscopy allows a determination of Eg in the surface-near bulk and thus complements the established surface- and bulk-sensitive techniques of Eg determination. As an example, we discuss the determination of Eg for a Cu(In,Ga)Se2 absorber [(1.52 +- 0.20) eV].

As a market segment for solar photovoltaic (PV) adoption, new homes have a number of attractive attributes. Homebuyers can easily roll the cost of the PV system into their mortgage and, with rebates or other financial incentives, potentially realize an immediate net positive cash flow from the investment. PV system performance can be optimized by taking roof orientation, shading, and other structural factors into account in the design of new homes. Building-integrated photovoltaics (BIPV), which are subject to fewer aesthetic concerns than traditional, rack-mounted systems, are well-suited to new construction applications. In large new residential developments, costs can be reduced through bulk purchases and scale economies in system design and installation. Finally, the ability to install PV as a standard feature in new developments - like common household appliances - creates an opportunity to circumvent the high transaction costs and other barriers typically confronted when each individual homeowner must make a distinct PV purchase decision.

A 3 GeV Synchrotron Radiation Source is being built in Melbourne, Australia. Commissioning is foreseen in 2006. The Storage ring has a circumference of 216 m and has a 14 fold DBA structure. For the storage ring the following magnets will be installed: 28 dipoles with a field of 1.3 T, and a gradient of 3.35 T/m; 56 quadrupoles with a gradient of 18 T/m and 28 with a gradient of 10 T/m; 56 sextupoles with a strength of B'' = 350 T/m and 42 with 150 T/m. The sextupoles are equipped with additional coils for horizontal and vertical steering and for a skew quadrupole. The pole profile was determined by scaling the pole profile of the SPEAR magnets [1] to the aperture of the ASP magnets. The magnets are to be supplied by Buckley Systems Ltd in Auckland, New Zealand.

A Fire Hazards Analysis was performed to assess the risk from fire and other related perils and the capability of the facility to withstand these hazards. This analysis will be used to support design of the facility.