None

None

None

None

In 2006, the U.S. Department of Energy initiated the Seismic Boreholes Project (SBP) to emplace boreholes at the Waste Treatment Plant (WTP) site in order to obtain direct shear wave velocity (Vs) measurements and other physical property measurements in Columbia River basalt and interbedded sediments of the Ellensburg Formation. The goal was to reduce the uncertainty in the response spectra and seismic design basis, and potentially recover design margin for the WTP. The characterization effort within the deep boreholes included 1) downhole measurements of the velocity properties of the suprabasalt, basalt, and sedimentary interbed sequences, 2) downhole measurements of the density of the subsurface basalt and sediments, and 3) geologic studies to confirm the geometry of the contact between the various basalt and interbedded sediments through examination of retrieved core from the core hole and data collected through geophysical logging of each borehole. This report describes the results of the geologic studies from three mud-rotary boreholes and one cored borehole at the WTP. All four boreholes penetrated the entire Saddle Mountains Basalt and the upper part of the Wanapum Basalt where thick sedimentary interbeds occur between the lava flows. The basalt flows penetrated in Saddle Mountains Basalt included the Umatilla …

None

A theory for the electroreduction/oxidation was formulated A new density formalism is discused with possible applications to pores in membranes

A relatively simple, quantitative approach is proposed to address a specific, important gap in the appr approach recommended by the USEPA Guidelines for Cancer Risk Assessment to oach address uncertainty in carcinogenic mode of action of certain chemicals when risk is extrapolated from bioassay data. These Guidelines recognize that some chemical carcinogens may have a site-specific mode of action (MOA) that is dual, involving mutation in addition to cell-killing induced hyperplasia. Although genotoxicity may contribute to increased risk at all doses, the Guidelines imply that for dual MOA (DMOA) carcinogens, judgment be used to compare and assess results obtained using separate 'linear' (genotoxic) vs. 'nonlinear' (nongenotoxic) approaches to low low-level risk extrapolation. However, the Guidelines allow the latter approach to be used only when evidence is sufficient t to parameterize a biologically based model that reliably o extrapolates risk to low levels of concern. The Guidelines thus effectively prevent MOA uncertainty from being characterized and addressed when data are insufficient to parameterize such a model, but otherwise clearly support a DMOA. A bounding factor approach - similar to that used in reference dose procedures for classic toxicity endpoints - can address MOA uncertainty in a way that avoids explicit modeling …

A year of data from sonic anemometer and mechanical wind sensors was analyzed and compared at a low-wind site. Results indicate that 15-minute average and peak 1-second wind speeds (u) from the sonic agree well with data derived from a co-located cup anemometer over a wide range of speeds. Wind direction data derived from the sonic also agree closely with those from a wind vane except for very low wind speeds. Values of standard deviation of longitudinal wind speed ({sigma}{sub u}) and wind direction fluctuations ({delta}{sub {theta}}) from the sonic and mechanical sensors agree well for times with u > 2 ms{sup -1} but show significant differences with lower u values. The most significant differences are associated with the standard deviation of vertical wind fluctuations ({sigma}{sub w}): the co-located vertical propeller anemometer yields values increasingly less than those measured by the sonic anemometer as u decreases from 2.5 approaching 0 ms{sup -1}. The combination of u over-estimation and under-estimation of {sigma}{sub w} from the mechanical sensors at low wind speeds causes considerable under-estimation of the standard deviation of vertical wind angle fluctuations ({sigma}{sub {phi}}), an indicator of vertical dispersion. Calculations of {sigma}{sub {phi}} from sonic anemometer measurements are typically 5{sup …

None

None

Implementation of a low field time-domain NMR scanner as a diagnostic tool in the production of new polymer components is described in the context of qualification of a new QA/QC device. A study to determine the optimal experimental parameters was performed and a robotic autosampler was built to enable scanning of multiple pads. Relationships between T{sub 2} values and physical properties of DC745 slabs were investigated, and the appropriate sampling parameters for the production setting were determined. Two versions of a robotic autosampler were built, and for the component described here a fourth radial axis was required in addition to traditional X, Y, and Z movement to eliminate the large variability in T{sub 2} due to inconsistent sample coverage caused by complex rib geometry of the component. Data show that with appropriate choice of experimental conditions of the NMR detector and the detection geometry of the robotic autosampler, sufficient resolution of variations in crosslink density on the millimeter scale could be determined. All data to date demonstrates that low-field NMR devices are a feasible tool for use in production settings for non-destructive quality control of polymer components.

None

None

None

None

Symmetries and their conservation laws play a fundamental role in Physics. Among them, the discrete symmetries corresponding to charge (C), parity (P), and time (T) transformations are extensively used in the theory of the elementary particles and their interactions (so called Standard Model (SM)) to give the basis of the fundamental physical description of nature. Eventual discoveries of violations of these symmetries become a crucial test for our understanding of the nature. It was assumed that the three discrete symmetries were not violated until 1956 when it was found that P is violated in the weak interaction. Soon it was understood that also the C is violated in the weak interaction. At that time these two violated symmetries were replaced by their combination, CP, which was considered a new fundamental symmetry. In 1964 also the CP was found violated in the case of the neutral K meson system. Since that year there were many achievements in theories and experiments in order to explain this symmetry violation. In the last five years the main contribution comes from the discovery of the CP violation in B meson system. In this note we will describe briefly how the CP violation is described in …

Proton radiography offers significant advantages over conventional X-ray radiography, including the capability of looking into thick, dense materials, better contrast for a wide range of materials, sensitivity to different materials of similar density, and better resolution because of the ability to focus beams. In order to achieve this capability it is crucial to understand the background due to neutrons and photons and to develop techniques to reduce it to tolerable levels. The physics goal of this project is to measure forward production of neutrons and photons produced by high-energy proton beams striking a variety of targets. This work is being carried out in conjunction with the Fermilab Experiment 907 (MIPP) collaboration including physicists from Lawrence Livermore Laboratory. Our group is responsible for the E907 forward neu-tron/photon calorimeters. These are the only detectors in the experiment that provide informa-tion on neutrons and photons. We are taking a leading role in obtaining and analyzing the for-ward production data and in developing an optimal detector for proton radiography. With the support of our Stewardship Science Academic Alliances grant, we were able to design, build, and commission the calorimeters on budget and ahead of schedule. E-907 officially started physics running at Fermilab in January …

We have made neutron capture cross-section measurements using the white neutron source at the Los Alamos Science Center, the DANCE detector array (Detector for Advanced Neutron Capture Experiments) and targets important for basic science and stockpile stewardship. In this paper, we review results from (n,{gamma}) reactions on {sup 94,95}Mo, {sup 152,154,157,160,nat}Gd, {sup 151,153}Eu and {sup 242m}Am for neutron energies from < 1eV up to {approx} 20 keV. We measured details of the {gamma}-ray cascade following neutron capture, for comparison with results of statistical model simulations. We determined the neutron energy dependent (n,{gamma}) cross section and gained information about statistical decay properties, including the nuclear level density and the photon strength function. Because of the high granularity of the detector array, it is possible to look at gamma cascades with a specified number of transitions (a specific multiplicity). We simulated {gamma}-ray cascades using a combination of the DICEBOX/GEANT computer codes. In the case of the deformed nuclei, we found evidence of a scissors-mode resonance. For the Eu, we also determined the (n,{gamma}) cross sections. For the {sup 94,95}Mo, we focused on the spin and parity assignments of the resonances and the determination of the photon strength functions for the compound nuclei …