Fluid flow rate in high temperature and pressure vessels can be difficult to measure due to the associated harsh environment, inaccessible locations and pressure boundary integrity concerns. However, by using quick response miniature thermocouples to measure the naturally occurring temperature variations within the flow, the fluid velocity can be inferred from the transit time analysis. This flow measurement technique has other advantages such as the flow profile is not significantly disturbed, no additional flow restrictions introduced and the system fiction factor is not increased. Furthermore, since the measured flow rate is generally unaffected by the global system dynamics, such as heat increases or losses, as well as changes in the flow regimes, the location of the thermocouple pairs is extremely flexible. Due to the mentioned advantages, the thermocouple cross-correlation flow measurement method has been developed for use at the Purdue University Multi-Dimensional Integral Test Assembly (PUMA). Currently, thermocouple cross-correlation technique is used to measure the Reactor Pressure Vessel downcomer fluid velocity and the suppression pool in-vessel natural circulation velocity.

Polycrystalline Pb(Zr{sub 0.6}Ti{sub 0.4})O{sub 3} (PZT) thin films, 3000-6000 {angstrom} thick, have been grown by metal-organic chemical vapor deposition (MOCVD) on (111)Pt/Ti/SiO{sub 2}/Si substrates at temperatures as low as 450-525 C. Random and (111)-oriented, or occasionally (100)-oriented, PZT films can be deposited directly on (111)Pt/Ti/SiO{sub 2}/Si. In addition, highly (100)-oriented films can be deposited consistently by using 150-250 {angstrom} thick (100)-oriented PbTiO{sub 3} (PT) or TiO{sub 2} as a template. Films were characterized by X-ray diffraction, electron microscopy, and electrical measurements. The as-grown (100)-oriented films on (111)Pt/TiSiO{sub 2}/Si substrates exhibited dielectric constants ({var_epsilon}{sub r}) of up to 600, remnant polarization (P{sub r}) of 40 {micro}C/cm{sup 2}, coercive field of 55 kV/cm, and breakdown field of 2-6 x 10{sub 7} V/m.

This document sets forth the responsibilities, interfaces, guidelines, rules, policy, and regulations for all workers involved in the S/O and SE construction, installation, and acceptance testing. This document is enforced from the first day that S/O and SE workers set foot on the NIF construction site until the end of the Project at Critical Decision 4. This document is applicable only to site activities, which are defined as those that occur within the perimeter of the fenced-off NIF construction zone and the Target Chamber Assembly Area (Helipad). The associated Special Equipment laydown and construction support areas listed in Appendix B are not under this plan; their safety provisions are discussed in the Appendix. Prototype and other support activities, such as the Amplifier Laboratory and Frame Assembly Unit assembly area, are not included in this plan. After completion of the Operational Readiness Review, the Facility Safety Procedure, Operational Safety Requirements, and Operational Safety Procedures are the governing safety documents for the operating facility. The S/O and SE project elements are required to implement measures that create a universal awareness of and promote safe job practices at the site. This includes all Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory, Sandia …

Historically, thermal hydraulics analyses on Large Break Loss of Coolant Accidents (LOCA) have been focused on the transients within the reactor or steam generator. Few have studied the effects of steam blowdown on the containment building. This paper discusses some theoretical issues as well as presenting numerical and experimental results of the blowdown tests performed at the Purdue University Multi-Dimensional Integrated Test Assembly (PUMA).

A detailed description of the background, technology and application for the development of a coal-fired pulse combustor for residential space heating was provided in the first quarterly report for the period October 1986 - December 1986, That material is omitted from this report. In May of 1988, DOE Contract No. DE-AC22-86PC90278 was modified with the addition of two new Tasks - 1.6 and 13 - as a Phase IA to bridge the gap between Phase I and II of the program. The descriptions of these tasks are now included in Section 1.1. Testing activities during this period were minimal with all effort focused upon resolving the issues associated with the extremely low slurry feed rates required for the unit. The use of a constant pressure slurry feed system followed by a low head peristaltic pump was successful for short periods of time providing the required slurry atomization but exceeded pump design specifications leading to rupture of the peristaltic tube. An attempt was made to locate a commercial pump with the required duty; delivering 1 to 2 gallons per hour at up to 100 psi but could not be located. Design modifications for the peristaltic pump were therefore initiated to meet …

The transport of a high current relativistic electron beam in a stripline beam kicker is strongly dependent on the wake properties of the structure. The effect of the beam-induced fields on the steering of the beam must be determined for a prescribed trajectory within the structure. A 3-D time domain electromagnetic code is used to determine the wake fields and the resultant Lorentz force on the beam both for an ultra-relativistic electron beam moving parallel to the beamline axis as well as a beam that follows a curved trajectory through the structure. Usually in determining the wake properties of the structure, a wake impedance is found for a beam that is moving parallel to the beamline axis. However, we extend this concept to curved trajectories by calculating beam induced forces along the curved trajectory. Comparisons are made with simple transmission line models of the structure. The wake properties are used in models to transport the beam self-consistently through the structure.

A magnetically assisted chemical separation (MACS) process was developed earlier at Argonne National Laboratory (ANL). This compact process was designed for the separation of transuranics (TRU) and radionuclides from the liquid waste streams that exist at many DOE sites, with an overall reduction in waste volume requiring disposal. The MACS process combines the selectivity afforded by solvent extractant/ion exchange materials with magnetic separation to provide an efficient chemical separation. Recently, the MACS process has been evaluated with acidic organophosphorus extractants for hazardous metal recovery from waste solutions. Moreover, process scale-up design issues have been addressed with respect to particle filtration and recovery. Two acidic organophosphorus compounds have been investigated for hazardous metal recovery, bis(2,4,4-trimethylpentyl) phosphinic acid (Cyanex{reg_sign} 272) and bis(2,4,4-trimethylpentyl) dithiophosphinic acid (Cyanex{reg_sign} 301). Coated onto magnetic microparticles, these extractants demonstrated superior recovery of hazardous metals from solution, relative to what was expected on the basis of results from solvent extraction experiments. The results illustrate the diverse applications of MACS technology for dilute waste streams. Preliminary process scale-up experiments with a high-gradient magnetic separator at Oak Ridge National Laboratory have revealed that very low microparticle loss rates are possible.

We have shown that PSLCs are capable of forming photorefractive gratings that operate in the thick grating regime. Polymer stabilization alters the charge transport and trapping characteristics of LCs, resulting in longer lived gratings, while maintaining the advantages of high orientational birefringence within LCs. Furthermore, very low applied electric fields (800 V/cm) and low optical intensities (100 mW/cm{sup 2}) are required to create large photorefractive effects in these materials. It is expected that optimization of the redox potentials of the chromophores within the PSLCs will continue to improve the performance of these materials.

This project attempts to demonstrate the effectiveness of exploiting thin-layered, low-energy deposits at the distal margin of a propagating turbidite complex through the use of hydraulically-fractured horizontal or high-angle wells. The combination of a horizontal or high-angled well and hydraulic fracturing will allow greater pay exposure than can be achieved with conventional vertical wells while maintaining vertical communication between thininterbedded layers and the well bore.

Thomson scattering measurements of the electron temperature in laser- produced gold plasmas are presented. We irradiated a flat gold disk target with one laser beam of the Nova laser facility. A second laser beam probed the plasma at a distance of 500{mu}m with temporally resolved Thomson scattering. The electron temperature measurements are compared with hydrodynamic simulations using the code LASNEX for experiments applying smoothed and unsmoothed heater beams. In case of an unsmoothed heater beam the simulations predict temperatures which are about 40% higher than our measured data. Although the agreement is improved for a smoothed heater beam, discrepancies exist in the decay phase of the plasma. We discuss possible explanations for these observations.

{open_quotes}Gist{close_quotes} is a scientific graphics library written by David H. Munro of Lawrence Livermore National Laboratory (LLNL). It features support for three common graphics output devices: X Windows, (Color) PostScript, and ANSI/ISO Standard Computer Graphics Metafiles (CGM). The library is small (written directly to Xlib), portable, efficient, and full-featured. It produces X versus Y plots with {open_quotes}good{close_quotes} tick marks and tick labels, 2-dimensional quadrilateral mesh plots with contours, vector fields, or pseudo color maps on such meshes, with 3-dimensional plots on the way. The Python Gist module utilizes the new {open_quotes}Numeric{close_quotes} module due to J. Hugunin and others. It is therefore fast and able to handle large datasets. The Gist module includes an X Windows event dispatcher which can be dynamically added (e.g., via importing a dynamically loaded module) to the Python interpreter after a simple two-line modification to the Python core. This makes fast mouse-controlled zoom, pan, and other graphic operations available to the researcher while maintaining the usual Python command-line interface. Munro`s Gist library is already freely available. The Python Gist module is currently under review and is also expected to qualify for unlimited release.

This report presents the results of a program to provide technical assistance to Meharry Medical College. The purpose of the program is to facilitate Meharry`s effort to finance a campus-wide facility retrofit. The US Department of Energy (USDOE) funded the program through a grant to the Tennessee Department of Economic and Community Development (TECD). The University of Memphis-Technology and Energy Services (UM-TES), under contract to TECD, performed program services. The report has three sections: (1) introduction; (2) project definition, financing, and participants; and (3) opportunities for federal participation.

The objective of this system is to stabilize and package plutonium metals and oxides of greater than 50% wt, as well as other selected isotopes, in accordance with the requirements for DOE standards for safe storage of these materials for 50 years. This document describes the highest level design information and user characteristics from an operational perspective. It provides guidance for developing procurement and installation specifications, interface requirements, and test plans.

Three aspects of supersymmetric theories are discussed: electroweak symmetry breaking, the issues of flavor, and gauge unification. The heavy top quark plays an important, sometimes dominant, role in each case. Additional symmetries lead to extensions of the standard model which can provide an understanding for many of the outstanding problems of particle physics. A broken supersymmetric extension of spacetime allows electroweak symmetry breaking to follow from the dynamics of the heavy top quark; an extension of isospin provides a constrained framework for understanding the pattern of quark and lepton masses; and a grand unified extension of the standard model gauge group provides an elegant understanding of the gauge quantum numbers of the components of a generation. Experimental signatures for each of these additional symmetries are discussed.

This report describes the progress in the Georgetown University research, development and demonstration project of a fuel cell/battery powered bus system. The topics addressed in the report include vehicle design and application analysis, technology transfer activities, coordination and monitoring of system design and integration contractor, current problems, work planned, and manpower, cost and schedule reports.

This is the twentieth quarterly report on the progress of activities addressing the Ferrocyanide Safety Issue associated with Hanford Site high-level radioactive waste tanks. Progress in the Ferrocyanide Safety Program is reviewed, including work addressing the six parts of Defense Nuclear Facilities Safety Board Recommendation 90-7 (FR 1990). All work activities are described in the revised program plan (DOE 1994b), and this report follows the same fomzat presented there. A summary of the key events occurring this quarter is presented in Section 1. 2. More detailed discussions of progress are located in Sections 2. 0 through 4. 0.

This document has been prepared and is being released for Project W-441 to record the design basis for the design of the Cold Vacuum Drying Facility. This document sets forth the physical design criteria, Codes and Standards, and functional requirements that were used in the design of the Cold Vacuum Drying Facility. This document contains section 3, 4, 6, and 9 of the Cold Vacuum Drying Facility Design Requirements Document. The remaining sections will be issued at a later date. The purpose of the Facility is to dry, weld, and inspect the Multi-Canister Overpacks before transport to dry storage.

Baryonic matter, in the form of Machos (MAssive Compact Halo Objects), might be a significant constituent of the dark matter that dominates the Milky Way. This article describes how surveys for Machos exploit the gravitational microlens magnification of extragalactic stars. The experimental searches for this effect monitor millions of stars, in some cases every night, looking for magnification events. The early results of these surveys indicate that Machos make up a significant fraction of the dark matter in the Milky Way, and that these objects have stellar masses. Truly substellar objects do not contribute much to the total. Additionally, the relatively high event rate towards the Galactic bulge seems to require that the bulge be elongated, and massive.

Speech is the predominant means of communication between human beings and since the invention of the telephone by Alexander Graham Bell in 1876, speech services have remained to be the core service in almost all telecommunication systems. Original analog methods of telephony had the disadvantage of speech signal getting corrupted by noise, cross-talk and distortion Long haul transmissions which use repeaters to compensate for the loss in signal strength on transmission links also increase the associated noise and distortion. On the other hand digital transmission is relatively immune to noise, cross-talk and distortion primarily because of the capability to faithfully regenerate digital signal at each repeater purely based on a binary decision. Hence end-to-end performance of the digital link essentially becomes independent of the length and operating frequency bands of the link Hence from a transmission point of view digital transmission has been the preferred approach due to its higher immunity to noise. The need to carry digital speech became extremely important from a service provision point of view as well. Modem requirements have introduced the need for robust, flexible and secure services that can carry a multitude of signal types (such as voice, data and video) without a fundamental …

Simulations of Cl plasma etch of Si surfaces with MD techniques agree reasonably well with the available experimental information on yields and surface morphologies. This information has been supplied to a Monte Carlo etch profile resulting in substantial agreement with comparable inputs provided through controlled experiments. To the extent that more recent measurements of etch rates are more reliable than older ones, preliminary MD simulations using bond-order corrections to the atomic interactions between neighboring Si atoms on the surface improves agreement with experiment through an increase in etch rate and improved agreement with XPS measurements of surface stoichiometry. Thermochemical and geometric analysis of small Si-Br molecules is consistent with the current notions of the effects of including brominated species in etchant gases.

A system has been developed for determining temperatures of galvanneal steel during the production process. It is based on an optical method known as phosphor thermometry and it provides for reliable, emissivity-independent measurements. This development is a part of the American Iron and Steel Institute`s (AISI) Advanced Process Control Program, a joint endeavor between the AISI and the U.S. Department of Energy. Galvanneal is a corrosion-resistant steel that is widely used for automotive and other applications. Improved thermometry should enable steelmakers to significantly improve product quality as well as to increase the yield. ultimately decreasing costs.

Potential designs for a high power superconducting delay line of approximately 10ms duration are described. The transmitted signal should have low dispersion and little attenuation to recapture the original signal. Such demands cannot be met using conventional metal conductors. This paper outlines a proposal for a new transmission line design using low temperature superconducting material which meets system specifications. The 25W line is designed to carry pulsed signals with an approximate rise time of 8 nsec and a maximum voltage of 25kV. Predicted electrical design and performance of the line is presented.

This report describes progress achieved during two years of DOE funding provided by grant DE-FG02-90ER61058. This grant was titled {open_quotes}Development of High Spectral Resolution Lidar Technology for use in the DOE ARM Program{close_quotes}. Nearly all grant objectives were achieved despite the fact that DOE abruptly canceled funding after only two years of a planned three year effort. The principal investigator learned of the cancellation only after attempting to determine why third year funding had not arrived. This occurred two weeks into the planned third year. The unexpected loss of funds created destructive dislocations in our research program. This report describes only progress during the two funded years. Subsequent research. funded by other sources, has resulted in High Spectral Lidar System performance well in excess of that proposed in the DOE program. This system has proven its performance in routine observations at the University of Wisconsin and during an extended field deployment as part of a winter storms project in Arizona.

Reported are the safety-screening analytes required by the C-107 tank characterization plan. Also included are copies of the differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) scans. Two core samples from tank C-107, obtained by the push-mode core sampling method, were received, extruded, and analyzed by the 222-S Laboratories. Drainable liquid was analyzed at the segment level for a separable organic layer, energetics by DSC, and percent water by TGA. Sludge samples were analyzed at the half-segment level by DSC, TGA, and for total alpha activity. No safety-screening notification limits were exceeded on any samples.