We have investigated problems associated with inferring cross sections for neutron reactions on unstable nuclei in the mass-90 region from charged-particle reactions on nearby stable targets. We conclude that effects due to precompound evaporation, isospin, and multiple reaction paths severely limit the circumstances under which charged-particle studies may be directly and easily converted to neutron cross sections of useful accuracy. 4 refs., 2 figs.

A technique based on discrete energy levels rather than energy level densities is presented for nuclear reaction calculations. The validity of the technique is demonstrated via theoretical and experimental agreement for cross sections, isomer-ratios and gamma-ray strength functions. 50 refs., 7 figs. (WRF)

We present scaled demonstrations of backlighter sources, emitting Bremsstrahlung x-rays with photon energies above 75 keV, that we will use to record x-ray Compton radiographic snapshots of cold dense DT fuel in inertial confinement fusion implosions at the National Ignition Facility (NIF). In experiments performed at the Titan laser facility at Lawrence Livermore National Laboratory, we measured the source size and the Bremsstrahlung spectrum as a function of laser intensity and pulse length, from solid targets irradiated at 2e17-5e18 W/cm{sup 2} using 2-40 ps pulses. Using Au planar foils we achieved source sizes down to 5.5 {micro}m, and conversion efficiencies of about 1e-3 J/J into x-ray photons with energies in the 75-100 keV spectral range. We can now use these results to design NIF backlighter targets and shielding, and to predict Compton radiography performance as a function of the NIF implosion yield and associated background.

Recent developments for mixing and CP violation in the D0 and Bs systems are reviewed, including (i) the recently emerging evidence for D0-D0bar mixing and the interpretations of the measurements; (ii) the theoretical status of the calculations of Delta(Gamma_D) and Delta(m_D); (iii) some implications of the measurement of Bs mixing for new physics.

None

The lightest isotope of Bh known was produced in the new {sup 209}Bi({sup 52}Cr,n){sup 260}Bh reaction at the Lawrence Berkeley National Laboratory's 88-Inch Cyclotron. Positive identification was made by observation of eight correlated alpha particle decay chains in the focal plane detector of the Berkeley Gas-Filled Separator. {sup 260}Bh decays with a 35{sub -9}{sup +19} ms half-life by alpha particle emission mainly by a group at 10.16 MeV. The measured cross section of 59{sub -20}{sup +29} pb is approximately a factor of four larger than compared to recent model predictions. The influences of the N = 152 and Z = 108 shells on alpha decay properties are discussed.

We compute the molecular line emission of massive protostellar disks by solving the equation of radiative transfer through the cores and disks produced by the recent radiation-hydrodynamic simulations of Krumholz, Klein, & McKee. We find that in several representative lines the disks show brightness temperatures of hundreds of Kelvin over velocity channels {approx} 10 km s{sup -1} wide, extending over regions hundreds of AU in size. We process the computed intensities to model the performance of next-generation radio and submillimeter telescopes. Our calculations show that observations using facilities such as the EVLA and ALMA should be able to detect massive protostellar disks and measure their rotation curves, at least in the nearest massive star-forming regions. They should also detect significant sub-structure and non-axisymmetry in the disks, and in some cases may be able to detect star-disk velocity offsets of a few km s{sup -1}, both of which are the result of strong gravitational instability in massive disks. We use our simulations to explore the strengths and weaknesses of different observational techniques, and we also discuss how observations of massive protostellar disks may be used to distinguish between alternative models of massive star formation.

The transition of ductal carcinoma in situ (DCIS) to invasive carcinoma is a key event in breast tumor progression that is poorly understood. Comparative molecular analysis of tumor epithelial cells from in situ and invasive tumors has failed to identify consistent tumor stage-specific differences. However, the myoepithelial cell layer, present only in DCIS, is a key distinguishing and diagnostic feature. To determine the contribution of non-epithelial cells to tumor progression, we analyzed the role of myoepithelial cells and fibroblasts in the progression of in situ carcinomas using a xenograft model of human DCIS. Progression to invasion was promoted by fibroblasts, but inhibited by normal myoepithelial cells. The invasive tumor cells from these progressed lesions formed DCIS rather than invasive cancers when re-injected into naive mice. Molecular profiles of myoepithelial and epithelial cells isolated from primary normal and cancerous human breast tissue samples corroborated findings obtained in the xenograft model. These results provide the proof of principle that breast tumor progression could occur in the absence of additional genetic alterations and that tumor growth and progression could be controlled by replacement of normal myoepithelial inhibitory signals.

The Motional Stark Effect (MSE) diagnostic will be essential for the study of advanced scenarios on ITER and its design is currently underway. In order meet the ITER MSE diagnostic design requirements, two approaches for the measurement are under consideration. The first is based on standard polarimeter techniques to measure the polarization of the emitted light, whereas the second measures the Stark splitting from which |B| can be inferred, where |B| is the magnitude of the total magnetic field. The baseline design of the optical system is centered on the first approach. Emphasis in this case is placed on minimizing the polarization aberrations of the optical relay system. Motivation for the second method results from concern that the optical properties of the plasma-facing mirror, particularly its diattenuation and retardance, will degrade with plasma exposure. The second approach, while less sensitive to aberrations induced by plasma exposure effects, requires greater optical throughput in order to measure the complete Stark spectrum. We have developed optimized designs for both techniques and will present a comparison of them and discuss the associated design trade-offs.

Summary: We describe a general multiplatform exploratorytool called TreeQ-Vista, designed for presenting functional annotationsin a phylogenetic context. Traits, such as phenotypic and genomicproperties, are interactively queried from a relational database with auser-friendly interface which provides a set of tools for users with orwithout SQL knowledge. The query results are projected onto aphylogenetic tree and can be displayed in multiple color groups. A richset of browsing, grouping and query tools are provided to facilitatetrait exploration, comparison and analysis.Availability: The program,detailed tutorial and examples are available online athttp://genome-test.lbl.gov/vista/TreeQVista.

The GEM gyrokinetic {delta}f simulation code [Chen, 2003] [Chen, 2007] is shown to reproduce electron temperature gradient turbulence at the benchmark operating point established in previous work [Nevins, 2006]. The electron thermal transport is within 10% of the expected value, while the turbulent fluctuation spectrum is shown to have the expected intensity and two-point correlation function.

Metallic nanoparticles suspended in aqueous solutions, and functionalized with chemical and biological surface coatings, are important elements in basic and applied nanoscience research. Many applications require an understanding of the electrokinetic or colloidal properties of such particles. In this paper we describe the results of experiments to measure the zeta potential of metallic nanorod particles in aqueous saline solutions, including the effects of pH, ionic strength, metallic composition, and surface functionalization state. Particle substrates tested include gold, silver, and palladium monometallic particles as well as gold/silver bimetallic particles. Surface functionalization conditions included 11-mercaptoundecanoic acid (MUA), mercaptoethanol (ME), and mercaptoethanesulfonic acid (MESA) self-assembled monolayers (SAMs), as well as MUA layers subsequently derivatized with proteins. Zeta potential data for typical charge-stabilized polystyrene particles are also presented for comparison. Experimental data are compared with theory. The results of these studies are useful in predicting and controlling the aggregation, adhesion, and transport of functionalized metallic nanoparticles within microfluidic devices and other systems.

NIF target diagnostics are being developed to observe and measure the extreme physics of targets irradiated by the 192-beam laser. The response time of target materials can be on the order of 100ps--the time it takes light to travel 3 cm--temperatures more than 100 times hotter than the surface of the sun, and pressures that exceed 109 atmospheres. Optical and x-ray diagnostics were developed and fielded to observe and record the results of the first 4-beam experiments at NIF. Hard and soft x-ray spectra were measured, and time-integrated and gated x-ray images of hydrodynamics experiments were recorded. Optical diagnostics recorded backscatter from the target, and VISAR laser velocimetry measurements were taken of laser-shocked target surfaces. Additional diagnostics are being developed and commissioned to observe and diagnose ignition implosions, including various neutron and activation diagnostics. NIF's diagnostics are being developed at LLNL and with collaborators at other sites. To accommodate the growing number of target diagnostics, an Instrument-Based Controls hardware-software framework has been developed to facilitate development and ease integration into the NIF Integrated Computer Control System (ICCS). Individual WindowsXP PC controllers for each digitizer, power supply and camera (i.e., instruments) execute controls software unique to each instrument model. Each hardware-software …

Scientific computations and collaborations increasingly rely on the network to provide high-speed data transfer, dissemination of results, access to instruments, support for computational steering, etc. The Energy Sciences Network is establishing a science data network to provide user driven bandwidth allocation. In a shared network environment, some reservations may not be granted due to the lack of available bandwidth on any single path. In many cases, the available bandwidth across multiple paths would be sufficient to grant the reservation. In this paper we investigate how to utilize the available bandwidth across multiple paths in the case of bulk data transfer.

The Model 9975 Shipping Package is the latest in a series (9965, 9968, etc.) of radioactive material shipping packages that have been the mainstay for shipping radioactive materials for several years. The double containment vessels are relatively simple designs using pipe and pipe cap in conjunction with the Chalfont closure to provide a leak-tight vessel. The fabrication appears simple in nature, but the history of fabrication tells us there are pitfalls in the different fabrication methods and sequences. This paper will review the problems that have arisen during fabrication and precautions that should be taken to meet specifications and tolerances. The problems and precautions can also be applied to the Models 9977 and 9978 Shipping Packages.

We report a 795-nm diode-pumpable Rb laser using a buffer gas of pure {sup 3}He. {sup 3}He gas enhances mixing of the Rb fine-structure levels. This enables efficient lasing at reduced He pressures and improved thermal management.

The possibilities for building a facility for the formation spectroscopy of ''charmonium'' and the study of ''exotics'' at the AGS with high intensity antiproton beams of good resolution and enhanced purity are explored. The performance potential of a number of long beams and the AGS booster are evaluated and costs are estimated. Fluxes of several 10/sup 7/ antiprotons per pulse with purities of 5% to 99% are possible with conventional long beams. A similar total antiproton flux would be available with the Booster with no beam contamination. This could effectively be enhanced by two orders of magnitude by reducing the momentum spread in order to scan very narrow (less than 1 MeV) resonances. The maximum momentum attainable with the present Booster magnet design is 5.6 GeV/c which only reaches the Chi/sub 0/ (3415) charmonium state. Modifications are possible which would raise the maximum momentum to 6.3 GeV/c to include all states up to and including eta'/sub c/ (3590) in its range. The performance potential for this physics at the AGS is found to compare favorably with that at other laboratories with more antiprotons delivered annually, running in the post-Booster era, than at FNAL or Super-Lear with ACOL under typical scheduling …

After extensive upgrading, our radio-frequency quadrupole (RFQ) linac is again installed on the accelerator test stand (ATS). The measured parameters of the RFQ, such as the output transverse emittance, transmitted beam, average energy, and energy spread is presented.

To improve MFTF-B, one must raise the ion energy and the electrostatic confining potential. This requires higher beam energy (200 keV in this case) and, to preserve end-plug adiabaticity and hold higher plasma density in the central cell, a higher level of magnetic field. In the MFTF Upgrade we also want to incorporate the new end plug configuration first invented for the MARS reactor. This new magnet design is compared with the present MFTF-B magnet set. The differences include the addition of a pair of recircularizing coils on the ends to be used in conjunction with the end region pumping and direct converter schemes, the use of a yin-yang pair rather than a baseball-type coil in the transition, and the elimination of the axicell in favor of the simple choke coil. Also, as noted earlier, an axisymmetric mirror cell is imbedded in the central cell.

At the Intense Pulsed Neutron Source (IPNS) pulses of protons accelerated in a synchrotron produce pulses of fast neutrons via the spallation process in an enriched uranium target. After moderation, the resulting pulses of slow neutrons are directed into beams which serve a variety of neutron scattering instruments. Currently there are thirteen neutron scattering instruments in operation or under development at IPNS, and six of these use position-sensitive neutron detectors (PSDs). These PSDs are: a 30 cm {times} 30 cm, {approximately}3 mm resolution, neutron Anger camera area PSD with {sup 6}Li-glass scintillator; a 2.5 cm dia, {approximately}0.7 mm resolution, microchannel-plate area PSD with {sup 6}Li-glass scintillator; a 20 cm {times} 20 cm, {approximately}5 mm resolution, {sup 3}He proportional counter area PSD; a 40 cm {times} 40 cm, {approximately}4 mm resolution, {sup 3}He proportional counter area PSD; a flat 20 cm long, {approximately}1.6 mm resolution, {sup 3}He proportional counter linear PSD; and 160 cylindrical {sup 3}He proportional counter linear PSDs, each of which is 1.27 cm in dia 60 cm long and has {approximately}14 mm resolution. These detectors, in addition to being position-sensitive, resolve the time of the neutron capture with {approximately}1 {mu}s precision for neutron time-of-flight measurements. This paper will …

The use of nonsymplectic procedures in particle tracing codes for relativistic electrons leads to errors that can be reduced only at the expense of using very small integration steps. More accurate results are obtained with symplectic transformations for position and momentum. A first-order symplectic integration procedure requires an iterative calculation of the new position coordinates using the old momenta, but the process usually converges in three or four steps. A first-order symplectic algorithm has been coded for cylindrical as well as Cartesian coordinates using the relativistic equations of motion with Hamiltonian variables. The procedure is applied to the steering of a beam of 80-keV electrons by a weak transverse magnetic field superposed on a strong magnetic field in the axial direction. The steering motion is shown to be parallel to the transverse field rather than perpendicular as would be the case without the strong axial field.

Fusion power holds the promise to supply not only electricity but also fuels to meet the balance of our energy needs. A new integrated power and breeding blanket design is described for tandem mirror reactors. The blanket incorporates features that make it suitable for synthetic fuel production. In particular, it is matched to the thermal and electrical power requirements of the General Atomic water-splitting process for production of hydrogen. Some improvements to the high temperature chemical process steps are described. These improvements are expected to allow production of hydrogen at about $13/GJ wholesale, including financing costs, capital amortization, and profit.

We describe our recent progress in the area of solid-state heat-capacity-lasers (SSHCL). In particular, we examine the physics of heat-capacity operation of a solid state laser and give the present technology status of our 10 kW flashlamp-pumped laser The current status of work leading to a diode-pumped Nd:GGG HCL is also described.

The Accelerated Strategic Computing Initiative (ASCI) Problem Solving Environment (PSE) consists of the tools and libraries needed for the development of ASCI simulation codes on ASCI machines. The recently completed ASCI PSE Milepost demonstrated that this software environment is available and functional at the scale used for application mileposts on ASCI White. As part of the PSE Milepost, we performed extensive performance testing of several critical run-time based systems. In this paper, we present microbenchmark results that compare the MPI [5], Pthreads and OpenMP [7, 8] implementations on ASCI White and ASCI Blue Pacific. Our results demonstrate that these run-time systems on White have improved sufficiently to accommodate the machine's approximately four-fold increase in processing capability over Blue Pacific.