Low cost SMP (Symmetric Multi-Processor) systems provide substantial CPU and I/O capacity. These features together with the ease of system integration make them an attractive and cost effective solution for a number of real-time applications in event selection. In ATLAS the authors consider them as intelligent input buffers (active ROB complex), as event flow supervisors or as powerful processing nodes. Measurements of the performance of one off-the-shelf commercial 4-processor PC with two PCI buses, equipped with commercial FPGA based data source cards (microEnable) and running commercial software are presented and mapped on such applications together with a long-term program of work. The SMP systems may be considered as an important building block in future data acquisition systems.

One application of metal media filters is in various nuclear air cleaning processes including applications for protecting workers, the public and the environment from hazardous and radioactive particles. To support this application the development of the ASME AG-1 FI Standard on Metal Media has been under way for more than ten years. Development of the proposed section has required resolving several difficult issues associated with operating conditions (media velocity, pressure drop, etc.), qualification testing, and quality acceptance testing. Performance characteristics of metal media are dramatically different than the glass fiber media with respect to parameters like differential pressures, operating temperatures, media strength, etc. These differences make existing data for a glass fiber media inadequate for qualifying a metal media filter for AG-1. In the past much work has been conducted on metal media filters at facilities such as Lawrence Livermore National Laboratory (LLNL) and Savannah River National Laboratory (SRNL) to qualify the media as High Efficiency Particulate Air (HEPA) Filters. Particle retention testing has been conducted at Oak Ridge Filter Test Facility and at Air Techniques International (ATI) to prove that the metal media meets or exceeds the 99.97% particle retention required for a HEPA Filter. Even with his testing, …

Presentation on biomass and biofuels technology and economics presented at Pacific Northwest National Laboratory, May 23, 2007.

Measurements of chromatic beta-beating were carried out for the first time in the RHIC accelerator during Run 2009. The analysis package developed for the LHC was used to extract the off-momentum optics for injection and top energy. Results from the beam experiments and compassion to the optics model are presented. The primary goal of the RHIC experiments were execute an on-line measurement of the optics using the tools developed for the LHC. Turn-by-turn BPM trajectories (typically 1000 turns) acquired immediately after an external dipole kick are numerically analyzed to determine the optical parameters at the location of the beam position monitors (BPMs). For chromatic optics, a similar analysis, but on a beam with finite momentum offset(s). Each optical measurement typically is calculated from multiple data sets to capture statistical variations and ensure reproducibility. The procedure of measurement and analysis is detailed in ref [1, 2]. Two dedicated experiments were performed at RHIC with protons during Run 2009. The first at injection energy and optics and the other at 250 GeV and squeezed optics. The basic RHIC parameters relevant for the two experiments are listed in Table 1.

The major objectives of the proposed study are to 1) determine the leaching characteristics of Cr(VI) from contaminated sediments collected from 100 area spill sites, 2) elucidate possible Cr(VI) mineral and/or chemical associations that may be responsible for Cr(VI) retention in the Hanford site 100 areas through the use of i) macroscopic solubility studies and ii) microscale characterization of contaminated sediments, and 3) from these data construct a conceptual model of Cr(VI) geochemistry in the Hanford 100 area vadose zone. These objectives are based on locating and obtaining contaminated sediment with depth and at varying Cr(VI) concentrations as we hypothesize that mineral/chemical-Cr(VI) associations should be related to the total Cr concentration and other master geochemical variables (e.g., pH, counter-cation type and concentration, and water content). In addressing these objectives, additional benefits accrued will be (1) a fuller understanding of Cr(VI) entrained in the vadose zone that will that can be utilized in modeling potential Cr(VI) source terms, and 2) accelerating the Columbia River 100 area corridor cleanup by developing remedial action based on a fundamental understanding of Cr(VI) vadose zone geochemistry.

The Cornell Electron Storage Ring (CESR) has been reconfigured as a test accelerator (CesrTA) for a program of electron cloud (EC) research at ultra low emittance. The instrumentation in the ring has been upgraded with local diagnostics for measurement of cloud density and with improved beam diagnostics for the characterization of both the low emittance performance and the beam dynamics of high intensity bunch trains interacting with the cloud. A range of EC mitigation methods have been deployed and tested and their effectiveness is discussed. Measurements of the electron cloud's effect on the beam under a range of conditions are discussed along with the simulations being used to quantitatively understand these results.

Recently a T = 1 resonance in the {Lambda}-{pi} system called Y{sub 1} has been observed with a mass of 1385 MeV. Two types of resonances have been predicted that might relate this observation to other elementary-particle interactions: (1) P 3/2 resonances in the {Lambda}-{pi} and {Sigma}-{pi} systems predicted by global symmetry, corresponding to the (3,2/ 3/2) resonance of the {pi}-N system, (2) a spin-1/2 Y-{pi} resonance resulting from a bound state in the {bar K}-N system. The position and the width of the observed Y{sub 1} resonance agree with both theories, but since the spin and parity have not yet been determined, they cannot distinguish between the two theoretical interpretations.

The complexity of environmental pollution, not reported all over the world, increases the demand for novel, highly efficient and cost-effective rehabilitation technologies.

Cathodic arc plasmas are considered fully ionized and theycontain multiply charged ions, yet, gaseous and metal neutrals can bepresent. It is shown that they can cause a significant reduction of theion charge states as measured far from the cathode spots. Several cathodematerials were used to study the evolution the mean ion charge state as afunction of time after arc ignition. The type of cathode material, arccurrent amplitude, intentionally increased background gas, additionalsurfaces placed near the plasma flow, and other factors influence thedegree of charge state reduction because all of these factors influencethe density of neutrals. In all cases, it was found that the mean ioncharge state follows an exponential decay of first order, Q(t) = A *exp(t/tau) + Qss, where A is a parameter describing the importance of thedecay, tau is the characteristic decay time, and Qss is a steady-statevalue approached for continuous arc operation. The extrapolated valuesQ(t-->0) indicate surprisingly high mean charge states as produced atcathode spots and not "skewed" by charge exchange collisions withneutrals.

This report consists of four appendices for the final report. They are: Appendix A: 700 C Vapor-Fed AMTEC Cell Calculations; Appendix B: 700 C Vapor-Fed AMTEC Cell Parts Drawings; Appendix C: 800 C Vapor-Fed AMTEC Cell Calculations; and Appendix D: 800 C Wick-Pumped AMTEC Cell System Design.

The Alkali Metal Thermal to Electric Converter (AMTEC) is a high temperature, high efficiency system for converting thermal to electrical energy, with no moving parts. It is based on the unique properties of {beta}{double_prime}-alumina solid electrolyte (BASE), which is an excellent conductor of sodium ions, but an extremely poor conductor of electrons. When the inside of the BASE is maintained at a higher temperature and pressure, a concentration gradient is created across the BASE. Electrons and sodium atoms cannot pass through the BASE. However, the sodium atoms are ionized, and the sodium ions move through the BASE to the lower potential (temperature) region. The electrons travel externally to the AMTEC cell, providing power. There are a number of potential advantages to a wick-pumped, vapor-fed AMTEC system when compared with other designs. A wick-pumped system uses capillary forces to passively return liquid to the evaporator, and to distribute the liquid in the evaporator. Since the fluid return is self-regulating, multiple BASE tubes can use a single remote condenser, potentially improving efficiency in advanced AMTEC designs. Since the system is vapor-fed, sodium vapor is supplied at a uniform temperature and flux to the BASE tube, even with non-uniform heat fluxes and temperatures …

None

The planned luminosity upgrade to LHC is likely to necessitate a large crossing angle and a local crab crossing scheme. For this scheme crab cavities align bunches prior to collision. The scheme requires at least four such cavities, a pair on each beam line either side of the interaction point (IP). Upstream cavities initiate rotation and downstream cavities cancel rotation. Cancellation is usually done at a location where the optics has re-aligned the bunch. The beam line separation near the IP necessitates a more compact design than is possible with elliptical cavities such as those used at KEK. The reduction in size must be achieved without an increase in the operational frequency to maintain compatibility with the long bunch length of the LHC. This paper proposes a suitable superconducting variant of a four rod coaxial deflecting cavity (to be phased as a crab cavity), and presents analytical models and simulations of suitable designs.

The commissioning of the RHIC spin flipper in the RHIC Blue ring during the RHIC polarized proton run in 2009 showed the detrimental effects of global vertical coherent betatron oscillation induced by the 2-AC dipole plus 4-DC dipole configuration. This global orbital coherent oscillation of the RHIC beam in the Blue ring in the presence of collision modulated the beam-beam interaction between the two RHIC beams and affected Yellow beam polarization. The experimental data at injection with different spin tunes by changing the snake current also demonstrated that it was not possible to induce a single isolated spin resonance with the global vertical coherent betatron oscillation excited by the two AC dipoles. Hence, a new design was proposed to eliminate the coherent vertical betatron oscillation outside the spin flipper by adding three additional AC dipoles. This paper presents the experimental results as well as the new design.

The primary activities associated with maintenance of the Subsurface Microbial Culture Collection (SMCC) were designed to ensure that the collection served as a valuable resource to DOE-funded and other scientists, especially DOE-funded scientists associated with the NABIR Program. These activities were carried out throughout the period covered by this report and in-cluded: (1) assistance in the selection of cultures for research, (2) distribution of cultures and/or data on request, (3) incorporation of newly isolated microbial strains, (4) preservation of newly isolated strains, (5) partial characterization of newly isolated strains, (6) development and main-tenance of representative subsets of cultures, (6) screening of SMCC strains for specific charac-teristics, (7) phylogenetic characterization of SMCC strains, (8) development and maintenance of a SMCC website, (9) maintenance of the SMCC databases, (10) archiving of SMCC records, and (11) quality assurance/quality control (QA/QC) activities. We describe in the Final Technical Report our accomplishments related to these activities during the period covered by this report.

None

Over the past few years Hi-Z has been developing a wide range of mW generators and life testing thermoelectric modules for the Department of Energy (DOE) to fulfill requirements by NASA Ames and other agencies. The purpose of this report is to determine the capabilities of a wide range of mW generators for various missions. In the 1st quarterly report the power output of various mW generators was determined via thermal and mechanical modeling. The variable attributes of each generator modeled were: the number of RHUs (1-8), generator outer diameter (1.25-4 in.), and G-load (10, 500, or 2,000). The resultant power output was as high as 180 mW for the largest generator with the lowest Gload. Specifically, we looked at the design of a generator for high G loading that is insulated with Xenon gas and multifoil solid insulation. Because the design of this new generator varied considerably from the previous generator design, it was necessary to show in detail how it is to be assembled, calculate them as of the generator and determine the heat loss from the system. A new method of assembling the RHU was also included as part of the design. As a side issue we …

The scope of the Mercury Laser project encompasses the research, development, and engineering required to build a new generation of diode-pumped solid-state lasers for Inertial Confinement Fusion (ICF). The Mercury Laser will be the first integrated demonstration of laser diodes, crystals, and gas cooling within a scalable laser architecture. This report is intended to summarize the progress accomplished during the first three years of the project. Due to the technological challenges associated with production of 900 nm diode-bars, heatsinks, and high optical-quality Yb:S-FAP crystals, the initial focus of the project was primarily centered on the R&D in these three areas. During the third year of the project, the R&D continued in parallel with the development of computer codes, partial activation of the laser, component testing, and code validation where appropriate.

This Engineering Task Plan (ETP) presents the integrity assessment examination of three DCRTs, seven catch tanks, and two ancillary facilities located in the 200 East and West Areas of the Hanford Site. The integrity assessment examinations, as described in this ETP, will provide the necessary information to enable the independently qualified registered professional engineer (IQRPE) to assess the condition and integrity of these facilities. The plan is consistent with the Double-Shell Tank Waste Transfer Facilities Integrity Assessment Plan.

The major objective of this study was to identify and analyze signal transduction factors that function with the CR4 receptor kinase. We pursued this analysis in Arabidopsis. Analysis of other members of the ACR4 related receptor (CRR) family produced biochemical evidence consistent with some of them functioning in ACR4 signal transduction. Yeast 2-hybrid identified six proteins that interact with the cytoplasmic domain of ACR4, representing putative downstream signal transduction components. The interactions for all 6 proteins were verified by in vitro pull down assays. Five of the interacting proteins were phosphorylated by ACR4. We also identified candidate interactors with the extracellular TNFR domain. We hypothesize this may be the ligand binding domain for ACR4. In one approach, yeast 2-hybrid was again used and five candidate proteins identified. Nine additional candidates were identified in a genome wide scan of Arabidopsis amino acid sequences that threaded onto the TNF structure.

Nonlinear gyroviscous forces in a collisionless plasma with temperature variations are calculated from the gyrofluid moments of the gyrokinetic Vlasov equation. The low-frequency gyrokinetic ordering and electrostatic perturbations are assumed, and an additional finite Larmor radius (FLR) expansion is performed. This approach leads naturally to an expression for the gyroviscous force in terms of the gyrocenter distribution function, thus including all resonant effects, and represents a systematic FLR expansion in a general form (no assumption of any closure is made). The expression for the gyroviscous force is also calculated in terms of the particle-fluid moments by making the transformation from the gyrocenter to particle coordinates. The calculated expression represents a modification of the Braginskii gyroviscosity for a collisionless plasma with nonuniform temperature. It is compared with previous calculations based on the traditional fluid approach. As a byproduct of the gyroviscosity calculations, we derive a set of nonlinear reduced gyrofluid (and a corresponding set of particle-fluid) moment equations with FLR corrections, which exhibit a generalized form of the ''gyroviscous cancellation.''

A prototype Ampere-class superconducting energy recovery linac (ERL) is under advanced construction at BNL. The ERL facility is comprised of a five-cell SC Linac plus a half-cell SC photo-injector RF electron gun, both operating at 703.75 MHz. The facility is designed for either a high-current mode of operation up to 0.5 A at 703.75 MHz or a high-bunch-charge mode of 5 nC at 10 MHz bunch frequency. The R&D facility serves a test bed for an envisioned electron-hadron collider, eRHIC. The high-current, high-charge operating parameters make effective higher-order-mode (HOM) damping mandatory, and requires the determination of HOM tolerances for a cavity upgrade. The niobium cavity has been tested at superconducting temperatures and has provided measured quality factors (Q) for a large number of modes. These numbers were used for the estimate of the beam breakup instability (BBU). The facility will be assembled with a highly flexible lattice covering a vast operational parameter space for verification of the estimates and to serve as a test bed for the concepts directed at future projects.

Possible uses of pattern recognition techniques for solving complex scientific problems are discussed, and previous experience in using the pattern recognition computer code RECOG to solve materials problems, specifically in determining the mechanical properties of high explosives, is described. (LCL)

These Interim Operational Safety Requirements (IOSR) for the Fuel Supply Shutdown (FSS) facility define acceptable conditions, safe boundaries, bases thereof, and management or administrative controls to ensure safe operation. The IOSRs apply to the fuel material storage buildings in various modes (operation, storage, surveillance).