Nine samples of ThO/sub 2/ -UO/sub 2/ prepared as part of the solgel process development studies showed no consistent effects from small variations in several process parameters. The reaction of methane and copper oxide was studied. Engineering studies of the continuous dissolution of simulated U-Zr-Sn fuels in 6.5 M NH4F, 0.6-1.0 M NH/sub 4/NO/sub 3/, 0.1 M H/sub 2/O/sub 2/ were continued in modified 6-in.-dia. equipment. A total of 1642 kg of U from NaK bonded SRE Core I fuel rods wad dejacketed to date/su Initial operability tests of the 250 ton prototype shear unit showed a number of minor modifications are warranted. Center tube temperatures measured in a vertical 64 tube electrically heated simulated fuel element bundle were very near those previously obtained in the horizontal position. A 304 SS tube containing eutectic NaK was dissolved by HF in fused saIt at a tube wall penetration rate of approximates 2 mils/hr. Partial differential equations were derived from the concentration of unreacted UF/sub 6/ as a function of time and position in a sphere of NaF during sorption of UF/sub 6/. Calcium nitrate solution was added directly to the pot calciner during Purex feeding to give smoother operation of the …

The IBM 7090 program Murgatroyd is a revised and extended version of the IBM 704 program PET-I, which solves (by a fifth-order Runge-Kutta procedure) the coupled firstorder differential equations for power, delayed neutron concentration, and temperature in a one-region reactor as a function of time, given an input reactivity variation represented by a series of linear ramps. The basic extensions were those which were necessary to include the effects of the separate heat capacities and temperature coefficients of the fuel sait and graphite in the MSRE, and of heat transfer between the fuel and graphite. In addition, the input and output sections of the previous program were modified to facilitate the use of the program in extensive parameter studies, and a calculation of the pressure rise in the core was included. Typical running times are of the order of l2 milliseconds per time step; a calculation of a 30-second power history using a 10 millisecond time step requires about 36 seconds of machine time. (auth)

The electromagnetic field produced by a vertical oscillating magnetic dipole above a plane conducting earth is obtained in integral form. An exact solution in closed form is obtained for the case in which the dipole and the point of observation are both located on the surface of the earth. (auth)

Measurements obtained during three periods of HRT operations indicated that the xenon poison fraction was approximately 0.010. The technique used was based on mass spectrographic analyses of the stable xenon isotopes in the reactor off-gas stream. Models proposed to explain the measurements show that xenon, which is formed primarily by decay of iodine adsorbed on the pipe walls, is held up on the walls, out of the circulating stream, for an average period of about eight hours. (auth)

The analysis of gamma-ray spectra measured with a scintillation counter with an anticoincidence annulus is described in detail. In particular the problem of the determination of the energy and intensity of gamma rays from such measurements is considered. The shapes of the full-energy peaks in observed complex spectra are studied and an attempt is made to justify their description in terms of a Gaussian response function. The details of the statistical analysis of complex gamma-ray spectra are given and, finally, procedures which have been used to confirm the validity of error estimates in energy and intensity measurements are described. (auth)

BS>A reinforced-concrete dual-purpose underground parking garage and personnel sheiter designed for a long-duration incident pressure of 40 psi was tested. The sheiter was exposed to shot Priscilla, an approximately 37-kt 700-ft balloon burst (June 24, 1957), at a ground range of 1600 ft (predicted 35-psi peak incident-pressure level). The recorded peak incident pressure at the shelter was approximately 39 psi. Postshot soil borings were made to obtain undisturbed samples for determining soil characteristics. Preshot and postshot field surveys were made to determine the total lateral and vertical displacement of the structure. The test structure provided adequate protection from the effects of the test device at the test GZ distance. Despite failure of the door sealing gasket, a rise in pressure in the interior did not exceed 1.0 psi. The flat-slab roof and supporting structure were more than adequate to resist the 39psi peak incident test loading. (P.C.H.)

ABS>Developmental work is reported on the EBWR and Borax-V other general development work is reported in the area of liquid metal cooled reactors and particularly on the EBR-I and H, and the fast reactor test facility. General reactor technological development is described on applied reactor physics, reactor fuels development, reactor materials development, heat engineering and fluid flow, chemical separations, advanced systems, and nuclear safety. (J.R.D.)

D-Space is a computer program which generates indices (hld), tests for space-group extinctions, and calculates d,'' 1/d/sup 2/, sin theta , sin/sup 2/ theta , sin theta / lambda , sin/sub 2/ theta / lambda /sup 2/, theta , and 2 theta for any crystal system and space group, requiring only the unit cell constants as data input. Optional calculations are the single-crystal angle settings, phi and chi, and various Lorentz and Lorentz-polarization corrections. (auth)

The hazards connected with the handling of actinide elements are surveyed. Emphasis is placed on Th, U, Np, and Pu. It is pointed out that the chemical toxicity of the actinides is usually minor when compared with radiochemi cal toxicity. Inhalation and ingestion are the important routes of entry but direct injection into the blood stream through wounds also requires consideration. Special enclosures, such as glove boxes, function primarily to minimize the risk of inhalation and aid in confinement. The external hazard from actinide elements, primarily due to gamma and fast neutron emission, varies considerably with the element and its source. Irradiated actinides, such as Th and Pu, usually show an increase in the external hazard from gamma radiation with extent of irradiation. (C.H.)

A Fortran program is described for calculating the absorption correction for application to single crystal x ray or neutron intensity measurements. The program is available in the form of symbolic punched cards. InstrucPions are included. (J.R.D.)

Continued research is reported in the areas of intrinsic radioactive tracers for industrial process control and the effects of structural factors on radioinduced graft polymerization. The use of Be-- Po neutron sources for production of short-lived isotopes is being investigated. Data are included on the effects of target volume, high-Z scattering media, target-isotope concentration, and macroscopic cross-section on speciflc and total activation produced with a 10-curie source. Research on graft-polyerization concerning the effects of structure on freetinued. Results indicate that the radical formed in a variety of substituted methacrylate polymers is the same in all cases. (J.R.D.)

Equations were derived by strain-energy methods for analyzing the stress and deflection in the boiler fuel element boxes used in the Pathfinder nuclear reactor. These boxes are of two types, both constructed of Zircaloy lI. One box is approximately 5 in. sq. The second is approximately 10 1/2 in. sq divided internally into four compartments (5 in. sq) by a cruciform control-rod guide structure. Stress and deflection in the box walls are caused by pressure differences across the walls. The equations were verified by testing an aluminum model of the single-element box and a Plexiglas model of the four-element box. There was less than 10% difference between theoretical and measured values for the maximum stress and deflection, and therefore, use of the equations for designing the Pathfinder fuel element boxes is justified. (auth)

None

Discussions are presented concerning integral experiments primarily on water and graphite systems. A description of experimental facilities is included along with details of die-away experiments, infinite-medium spectrum measurements, spatially dependent spectrum measurements, spectrum measurements for graphite systems, and development of a subcritical assembly program. (J.R.D.)

Detailed measurements were made of the fast-neutron and gamma dose rates and the thermal-neutron fluxes existing at the surfaces of the biological shield of the University of Illinois TRIGA Mark II Research Reactor. Dose rates and fluxes were found to be extremely low. A comparison was made by means of threshold foil techniques between the fast-neutron flux in a beam hole of the reactor during steady-state operation at 1 kw and during a nominal 250 Mw, 30 msec pulse produced by rapid insertion of approximates two dollars of excess reactivity. The flux over the duration of the pulse was approximately four times that for steady-state operation for 1 hr at 1 kw. Fast-neutron dose rates and thermal-neutron fluxes were measured at each of the four beam ports of the reactor at operating powers of 0, 1, and 5 watts. Some gamma dose rate data was also obtained at 0 and 1 watt. The threshold foil technique used is described. (auth)

Conceptual design and economic studies of a steamcooled fast breeder reactor that can also be used as a source of power are presented. Two reactor plant sizes were considered: a 300-Mw(e) central power station plant and a 40 Mw(e) plant. It was concluded that attractive economics and good breeding characteristics breeding ratios from 1.27 to 1.42) can be achieved in steam- cooled PuO/sub 2/UO/sub 2/ fueled fast reactors. Low capital costs can be obtained by a compact reactor core and the absence of large heat exchangers and complicated process systems. Reactor design data are discussed. Analysis showed that these reactors can be prevented from going prompt critical, when fully flooded, by incorporating a tolerable amount of high resonance absorption materials such as hafnium or indium. An increase in reactivity on loss of coolant was indicated by preliminary calculations. (M.C.G.)

The specification contains information concerning the material, process, and product requirements to be met by the fabricator. (J.R.D.)

Flexible Monte Carlo programs FMC-N and FMC-G (GE-ANPD Programs 516 and 515) are digital computer programs which apply Monte Carlo methods to simulate neutron and gamma ray life histories, respectively, in a source-shield configuration. The programs were designed for flexlbility in the geometrical, material, nuclear, and source descriptions of source-shield configurations and variance reduction techniques. The programs were also designed to optimize the use of fast memory and to provide complete freedom in the dimensions of the various input quantities. The programs are coded for an IBM-704 computer with a fast memory capacity of 32,768 storage locations and eight magnetic tape units, and for an IBM7090 computer wlth a fast memory capacity of 32,768 storage locations and ten magnetic tape unlts on two date channels. No magnetic drum storage is necessary for either computer. (auth)

A gamma pinhole camera was devised to permit a nondestructive examination of irradiated specimens while still in sealed capsules. The camera was designed such that a complete experiment may be withdrawn from an irradiation facility, the specimen autoradiographed, and the experiment then reinserted if so desired. The pinhole aperture is 0.020 in., and the source to pinhole block is 4 ft. The image-to-source sizes are a one-to-one ratio. The resolution of the image is 0.03 in. (auth)

None

>The basic fuel element consisted of a uniform dispersion of fuel in a 1 1/2 inch diameter graphite sphere. Ceramic coatings for the retention of fission products were studied. It was found-that molecularly deposited'' ceramics such as alumina, siliconized silicon carbide, and pyrolytic carbon were excellent barriers to fission product leakage. The most advantageous location for ceramic coatings was found to be on the individual fuel particles, where the coating was subject to smaller forces and where a larger thickness-todiameter ratio could be used than if the coating were on the surface of the graphite sphere. Fuel elements were irradiated to burnups ranging up to about 6 at.% U/sup 235/. In all specimens containing a uniform dispersion of fuel, the graphite spheres were found to retain their structural properties after irradiation. Data are given on fuel particle coatings of A1/sub 2/O/sub 3/, pyrolytic carbon, and metals: surface coatings of siliconized silicon carbide, pyrolytic carbon, and metal carbides; properties of and the effects of irradiation on graphite spheres; the use of natural graphite in preparing a high-density matrix material; graphite fueling by thorium nitrate infiltration; subsurface metal and metal carbide coatings for graphite; and an in-pile loop program on the behavior …

BS>Laboratory studies on the processing of graphite-base fuel elements containing pyrolytic carbon- or Al/sub 2/O/sub 3/-coated particles are reviewed. Potential processes for recovering U and Th from irradiated elements include grinding followed by acid leaching, and, burning and subsequent dissolution of the oxide ash. Disintegration in 90% HNO/sub 3/ was briefly evaluated as a method for determining the integrity of coated particles dispersed in graphite matrices. (auth)

The magnitude of the K{sup 0}{sub S} - K{sup 0}{sub L} mass difference has been measured by monitoring the time dependence of the strangeness of neutral K's produced in hydrogen and deuterium in the LRL 25 '' hydrogen bubble chamber. The particles originate as K-bar{sup 0} in K{sup -} change-exchange scatters at .85 to 1.15 Bev/c; the signature for an S = -1 reaction is the production of a hyperon. Seventy- seven events were found, obtaining {Delta}{omega} = 0.50 =- 0.15, measured in units of inverse K{sup 0}{sub S} lifetime. This and two other recent measurements using the same method are consistent with one another and with measurements of {Delta}{omega} by other means. A combined ''world average'' of nine reasonably consistent measurements gives {Delta}{omega} = 0.60 +- 0.06.

Supplement to ANL-5607. Alterations and additions made to the Experimental Boiling Water Reactor (EBWR) plant to permit operation at power levels up to I00 Mw(t) are described. Topics covered include over-all system modifications and additions, nuclear component modifications and additions, and reboiler plant component description. (M.C.G.)