This work focuses on developing a scientific understanding of the processes associated with NO{sub x} trap operation. NO{sub x} traps are the most advanced technology for achieving future emissions standards with diesel engines. Successful development of NO{sub x} traps will allow widespread use of diesel engines in light-duty vehicles, reducing oil imports by as much as 60%. Diesel engines have a high efficiency and low maintenance that makes them the ideal choice for transportation applications. Use of diesel engines in all light-duty vehicles would reduce oil consumption in the USA by 30% and oil imports by 60%, considerably improving our energy security. For heavy trucks, there is no viable alternative to diesel engines. Only diesel engines can provide the necessary high efficiency and long life. These benefits are offset by high emission of pollutants. Diesel engines have high emissions of NO{sub x} and particulate matter. Over the last 20 years, EPA has been reducing allowable emissions from diesel engines, and NO{sub x} emissions are scheduled to be cut by a factor of 10 over the next 7 years. The target NO{sub x} emissions for year 2010 is 0.20 g/hp-hr. This value is well below 1 g/hp-hr, which has been identified …

We have conducted a detailed numerical analysis of HCCI engine operation at low loads to investigate the sources of HC and CO emissions and the associated combustion inefficiencies. Engine performance and emissions are evaluated as fueling is reduced from typical HCCI conditions, with an equivalence ratio f = 0.26 to very low loads (f = 0.04). Calculations are conducted using a segregated multi-zone methodology and a detailed chemical kinetic mechanism for iso-octane with 859 chemical species. The computational results agree very well with recent experimental results. Pressure traces, heat release rates, burn duration, combustion efficiency and emissions of hydrocarbon, oxygenated hydrocarbon, and carbon monoxide are generally well predicted for the whole range of equivalence ratios. The computational model also shows where the pollutants originate within the combustion chamber, thereby explaining the changes in the HC and CO emissions as a function of equivalence ratio. The results of this paper contribute to the understanding of the high emission behavior of HCCI engines at low equivalence ratios and are important for characterizing this previously little explored, yet important range of operation.

The authors report the observation of a narrow state decaying into J/{psi}{pi}{sup +}{pi}{sup -} and produced in 220 pb{sup -1} of {bar p}p collisions at {radical}s = 1.96 TeV in the CDF II experiment. They observe 730 {+-} 90 decays. The mass is measured to be 3871.3 {+-} 0.7(stat) {+-} 0.4(syst) MeV/c{sup 2}, with an observed width consistent with the detector resolution. This is in agreement with the recent observation by the Belle Collaboration of the X(3872) meson.

Double-shell ignition is complementary to the baseline approach by virtue of not requiring: (1) cryogenic preparation and fielding, (2) high-contrast pulse-shaping for shock-timing, and (3) demanding x-ray flux symmetry control. The use of simpler low-contrast pulse-shaping potentially allows more benign hohlraum conditions by reducing the risk of laser backscatter. In addition, the associated higher laser fluence threshold for optics damage initiation allows the possibility of more routine high-fluence shots with 2{omega} on the NIF. Based on LDRD-sponsored research in FY01-03 on NIF double-shell ignition target designs, the feasibility of this approach was advanced through both a highly successful implosion campaign on the Omega laser facility and a variety of design improvements for mitigating instability. The double-shell implosion campaign on Omega achieved the important milestone of repeatably demonstrating dominant primary (2.45 MeV) neutron production from the mix-susceptible compressional phase of a double-shell implosion, using fall-line design optimization and exacting fabrication standards. Showing effective control of fuel-pusher mix during final compression is an essential element for achieving ignition. In our studies to control mix by reducing hydrodynamic instability a new pathway for destructive Rayleigh-Taylor growth on the outer surface of the inner shell at ignition scales was identified. However, highly resolved multi-mode …

The cathodic arc plasmas produced by cathode spots usuallyinclude macroparticles, which is undesirable for many applications. Acommon way of removing macroparticles is to use curved solenoid filterswhich guide the plasma from the source to the substrate. In this work, anarc source with relatively small cathode is used, limiting the possiblelocations of plasma production. The relative position of cathodic arcsource and macroparticle filtered was systematically varied and thefiltered plasma current was recorded. It was found that axis-symmetricplasma injection leads to maximum throughput only if an anode aperturewas used, which limited the plasma to near-axis flow by scraping offplasma at larger angles to the axis. When the anode aperture was removed,more plasma could enter the filter. In this case, maximum filtered ioncurrent was achieved when the plasma was injected off-axis, namely offsetin the direction where the filter is curved. Such behavior wasanticipated because the plasma column in the filter is known to beshifted by ExB and centrifugal drift as well as by non-axis-symmetriccomponents of the magnetic field in the filter entrance and exit plane.The data have implications for plasma transport variations caused bydifferent spot locations on cathodes that are not small compared to thefilter cross section.

There has been superb progress in understanding the neutrino sector of elementary particle physics in the past few years. It is now widely recognized that the possibility exists for a rich program of measuring CP violation and matter effects in future accelerator {nu} experiments, which has led to intense efforts to consider new programs at neutrino superbeams, off-axis detectors, neutrino factories and beta beams. However, the possibility of measuring CP violation can be fulfilled only if the value of the neutrino mixing parameter {theta}{sub 13} is such that sin{sup 2} (2{theta}{sub 13}) greater than or equal to on the order of 0.01. The authors of this white paper are an International Working Group of physicists who believe that a timely new experiment at a nuclear reactor sensitive to the neutrino mixing parameter {theta}{sub 13} in this range has a great opportunity for an exciting discovery, a non-zero value to {theta}{sub 13}. This would be a compelling next step of this program. We are studying possible new reactor experiments at a variety of sites around the world, and we have collaborated to prepare this document to advocate this idea and describe some of the issues that are involved.

The primary goal since inception of this DOE grant award in 1991 to Wellman Laboratories of Photomedicine, Harvard Medical School, Massachusetts General Hospital, has been to support competitive research fellowships aimed at solving important medical problems, contributing significant new knowledge and/or technology. This approach was taken according to the original intent of the DOE program, to foster excellent centers for research and development of lasers and optics in medicine. Laser photomedicine broadly encompasses optical therapy and optical diagnostics, within any organ system. The research supported clearly reflects this breadth and depth.

The effect of the application of a DC current on the annealing of point defects in Ni{sub 3}Ti was investigated by positron annihilation spectroscopy (PAS). An increased rate of point defect annealing is observed under the influence of a current and is attributed to a 24% decrease in the mobility activation energy. The results are interpreted in terms of the electron wind effect and the complex nature of diffusion in ordered intermetallic phases. This work represents the first direct evidence of the role of the current on the mobility of point defects in intermetallic systems.

Fermilab plans to deliver 5-15 fb{sup -1} of integrated luminosity to the CDF and D0 experiments. The current inner silicon detectors at CDF (SVXIIa and L00) will not tolerate the radiation dose associated with high luminosity running and will need to be replaced. A new readout chip (SVX4) has been designed in radiation-hard 0.25 {micro}m CMOS technology. Single sided sensors are arranged in a compact structure, called a stave, with integrated readout and cooling systems. This paper describes the general design of the Run IIb system, testing results of prototype electrical components (staves), and prototype silicon sensor performance before and after irradiation.

The purpose of this design calculation is to estimate radiation doses received by personnel in the Remediation Facility performing operations to receive, prepare, open, repair, recover, disposition, and correct off-normal and non-standard conditions with casks, canisters, spent nuclear fuel (SNF) assemblies, and waste packages (WP). The specific scope of work contained in this calculation covers both collective doses and individual worker group doses on an annual basis, and includes the contributions due to external and internal radiation. The results of this calculation will be used to support the design of the Remediation Facility and provide occupational dose estimates for the License Application.

The purpose of this design calculation is to estimate radiation doses received by personnel working in the subsurface facility of the repository performing emplacement, maintenance, and retrieval operations under normal conditions. The results of this calculation will be used to support the design of the subsurface facilities and provide occupational dose estimates for the License Application.

A laser safety and hazard analysis was performed for the airborne AURA (Big Sky Laser Technology) lidar system based on the 2000 version of the American National Standard Institute's (ANSI) Standard Z136.1, for the Safe Use of Lasers and the 2000 version of the ANSI Standard Z136.6, for the Safe Use of Lasers Outdoors. The AURA lidar system is installed in the instrument pod of a Proteus airframe and is used to perform laser interaction experiments and tests at various national test sites. The targets are located at various distances or ranges from the airborne platform. In order to protect personnel, who may be in the target area and may be subjected to exposures, it was necessary to determine the Maximum Permissible Exposure (MPE) for each laser wavelength, calculate the Nominal Ocular Hazard Distance (NOHD), and determine the maximum 'eye-safe' dwell times for various operational altitudes and conditions. It was also necessary to calculate the appropriate minimum Optical Density (ODmin) of the laser safety eyewear used by authorized personnel who may receive hazardous exposures during ground base operations of the airborne AURA laser system (system alignment and calibration).

A laser safety hazard evaluation and pertinent output measurements were performed (June 2003 through August 2003) on several VITAL-2 Variable Intensity Tactical Aiming Light--infrared laser, associated with the Proforce M-4 system used in force-on-force exercises. The VITAL-2 contains two diode lasers presenting 'Extended Source' viewing out to a range on the order of 1.3 meters before reverting to a 'Small Source' viewing hazard. Laser hazard evaluation was performed in concert with the ANSI Std. Z136.1-2000 for the safe use of lasers and the ANSI Std. Z136.6-2000 for the safe use of lasers outdoors. The results of the laser hazard analysis for the VITAL-2, indicates that this Tactical Aiming IR laser presents a Class 1 laser hazard to personnel in the area of use. Field measurements performed on 71 units confirmed that the radiant outputs were at all times below the Allowable Emission Limit and that the irradiance of the laser spot was at all locations below the Maximum Exposure Limit. This system is eye-safe and it may be used under current SNL policy in force-on-force exercises. The VITAL-2 Variable Intensity Tactical Aiming Light does not present a laser hazard greater than Class 1, to aided viewing with binoculars.

We discuss possible searches for the new particles predicted by Little Higgs Models at the LHC. By using a simulation of the ATLAS detector, we demonstrate how the predicted quark, gauge bosons and additional Higgs bosons can be found and estimate the mass range over which their properties can be constrained.

The Joint Institute for Nanoscience (JIN) is a cooperative venture of the University of Washington and Pacific Northwest National Laboratory to encourage and enhance high-impact and high-quality nanoscience and nanotechnology of all types. This first annual report for the JIN summarizes activities beginning in 2001 and ending at the close of fiscal year 2003 and therefore represents somewhat less than two years of activities. Major portions of the JIN resources are dedicated to funding graduate students and postdoctoral research associates to perform research in collaborations jointly directed by Pacific Northwest National Laboratory (PNNL) staff scientists and University of Washington (UW) professors. These fellowships were awarded on the basis of applications that included research proposals. JIN co-sponsors an annual Nanoscale Science and Technology Workshop held in Seattle. In addition to involving PNNL staff in various UW nanoscience courses and seminars, a National Science Foundation grant Development of UW-PNL Collaborative Curriculums in Nano-Science and Technology has allowed the development of three intensive short courses that are taught by UW faculty, PNNL staff, and faculty from other institutions, including Washington State University, the University of Idaho, Stanford University, and the University of Alaska. The initial JIN agreement recognized that expansion of cooperation beyond …

Understanding how water and solutes move through the vadose zone is necessary to make effective remedial action decisions where contaminants were spilled or leaked at the ground surface or were buried in shallow land-disposal sites. In layered, heterogeneous systems, high contrasts in hydraulic conductivity can lead to formation of perched water zones, and enhanced lateral spread of contamination. Two conceptual models are considered solute for migration through the vadose zone. In the diffuse flow conceptual model, perched water zones accumulate until the head over the perching layer becomes sufficient to drive the infiltration through the perching layer. In the preferential flow conceptual model, perched water moves laterally until a path around the perching layer is encountered. Preferential flow paths can enhance contaminant migration because greater moisture saturation leads to higher advective velocities, and the preferential flow paths bypass low permeability layers with higher sorption capacity. Monitoring wells and instrumented boreholes were installed around a newly constructed industrial-waste percolation pond and an ephemeral river that lie over a 150-m-thick layered vadose zone. Background data gathered before discharge to the pond began show the presence of at least one, and possibly two, deep perched zones. The shallower zone, at approximately 45-m below …

The icosahedral symmetry is one of the most intriguing symmetries, as it not only presents challenge but it appears in many fullerenes and high energetic materials such as the dodecahedral N{sub 20}. We have considered the combinatorics of all irreducible representations of the icosahedral symmetry for a number of multinomial partitions for vertex, face and edge colorings in this work. We have constructed the combinatorial tables for all irreducible representations for various multinomial partitions of colorings for the vertices, edge and faces of the icosahedron. These techniques should have important applications to enumerations and spectroscopy of fullerenes and high-energy materials such as N{sub 20}.

The character table of the fully non-rigid water pentamer, (H{sub 2}O){sub 5} is derived for the first time. The group of all feasible permutations is the wreath product group S{sub 5}[S{sub 2}] and it consists of 3840 operations divided into 36 conjugacy classes and irreducible representations. We have shown that the full character table can be constructed using elegant matrix type generator algebra. The character table has been applied to the water pentamer by obtaining the nuclear spin statistical weights of the rovibronic levels and tunneling splittings of the fully non-rigid pentamer. We have also obtained the statistical weights and tunneling splittings of a semi-rigid deuterated pentamer that exhibits pseudo rotation with an averaged C{sub 5h}(G{sub 10}) symmetry used in the assignment of vibration-rotation-tunneling spectra . The correlation tables have been constructed for the semirigid (G{sub 10}) to non-rigid (G{sub 3840}) groups for the rotational levels and tunneling levels. The nuclear spin statistical weights have also been derived for both the limits.

The present quarterly report describes some of the investigations on the structural properties of dense OTM bars provided by Praxair and initial studies on newer composition of Ti doped LSF. Dense OTM bars provided by Praxair were loaded to fracture at varying stress rates. Studies were done at room temperature in air and at 1000 C in a specified environment to evaluate slow crack growth behavior. In addition, studies were also begun to obtain reliable estimates of fracture toughness and stable crack growth in specific environments. Newer composition of Ti doped LSF membranes were characterized by neutron diffraction analysis. Quench studies indicated an apparent correlation between the unit cell volume and oxygen occupancy. The studies however, indicated an anomaly of increasing Fe/Ti ratio with change in heat treatment. Ti doped LSF was also characterized for stoichiometry as a function of temp and pO{sub 2}. The non stoichiometry parameter {delta} was observed to increase almost linearly on lowering pO{sub 2} until a ideal stoichiometric composition of {delta} = 0.175 was approached.

During August 2002 we conducted a hydroacoustic survey to enumerate pelagic fish >406 mm in Lake Pend Oreille, Idaho. The purpose of this survey was to determine a collective lakewide biomass estimate of pelagic bull trout Salvelinus confluentus, rainbow trout Oncorhynchus mykiss, and lake trout S. namaycush and compare it to pelagic prey (kokanee salmon O. nerka) biomass. By developing hydroacoustic techniques to determine the pelagic predator to prey ratio, we can annually monitor their balance. Hydroacoustic surveys were also performed during December 2002 and February 2003 to investigate the effectiveness of autumn and winter surveys for pelagic predators. The inherent problem associated with hydroacoustic sampling is the inability to directly identify fish species. Therefore, we utilized sonic tracking techniques to describe rainbow trout and lake trout habitat use during our winter hydroacoustic survey to help identify fish targets from the hydroacoustic echograms. During August 2002 we estimated there were 39,044 pelagic fish >406 mm in Lake Pend Oreille (1.84 f/ha). Based on temperature and depth utilization, two distinct groups of pelagic fish >406 mm were located during August; one group was located between 10 and 35 m and the other between 40 and 70 m. The biomass for pelagic …

Small business lending is big business and growing. Loans under $1 million totaled $460 billion in June 2001, up $23 billion from 2000. The number of loans under $100,000 continued to grow at a rapid rate, growing by 10.1%. The dollar value of loans under $100,000 increased 4.4%; those of $100,000-$250,000 by 4.1%; and those between $250,000 and $1 million by 6.4%. But getting a loan can be difficult if a business owner does not know how to find small business-friendly lenders, how to best approach them, and the specific criteria they use to evaluate a loan application. This is where the Geothermal Money Book comes in. Once a business and financing plan and financial proposal are written, the Geothermal Money Book takes the next step, helping small geothermal businesses locate and obtain financing. The Geothermal Money Book will: Explain the specific criteria potential financing sources use to evaluate a proposal for debt financing; Describe the Small Business Administration's (SBA) programs to promote lending to small businesses; List specific small-business friendly lenders for small geothermal businesses, including those which participate in SBA programs; Identify federal and state incentives which are relevant to direct use and small-scale (< 1 megawatt) power …

A scientific demonstration of a Cs laser is described in which the measured slope efficiency is as high as 0.59 W/W using a Ti:Sapphire laser as a surrogate diode-pump. In addition to presenting experimental data, a laser energetics model that accurately predicts laser performance is described and used to model a power-scaled, diode-pumped system.

This report is a compilation of the calendar year 2003 groundwater sampling results from the Area 5 Radioactive Waste Management Site, Nevada Test Site. Wells Ue5PW-1, Ue5PW-2, and Ue5PW-3 were sampled semi-annually for the required analytes: pH, specific conductance, total organic carbon (TOC), total organic halides (TOX), tritium, and major cations/anions. Results from all samples collected in 2003 were within established criteria. These data indicate that there has been no measurable impact to the uppermost aquifer from the Resource Conservation and Recovery Act (RCRA) regulated unit within the Area 5 Radioactive Waste Management Site and confirm that any previous detections of TOC and TOX were false positives. Contamination indicator data are presented in control chart and tabular form with investigation levels indicated. Gross water chemistry data are presented in graphical and tabular form. There were no major changes noted in the monitored groundwater elevations. There continues to be an extremely small gradient to the northeast with an average flow velocity of less than one foot per year. Other information in the report includes a Cumulative Chronology for the Area 5 Radioactive Waste Management Site Groundwater Monitoring Program, a brief description of the site hydrogeology, and the current groundwater sampling procedure.

The authors are in the re-evaluating of all the actinide cross section evaluations in LLNL's ENDL database, starting with uranium and focusing on inventory changing reactions. This article describes their first serious pass at updating the uranium cross section data, including estimates of cross section uncertainties. Furthermore, they are developing new tools to automate the re-evaluation and this article contains some preliminary results from these codes, namely the {sup 235}U(n, 2n) and {sup 238}U(n, 2n) evaluations.