This document presents a set of guidelines for authors who wish to express themselves more clearly to foreign readers, or readers whose first language is not American English. Topics include idioms, technical terms, jargon, word meaning, acronyms, and international conventions of measurement. The guidelines will help writers of technical documents present their ideas more effectively to audiences that may include individuals whose first language is not American English, including audiences with individuals from other English-speaking countries.

Presently the Heavy Ion Fusion Virtual National Laboratory is researching ion sources and injector concepts to understand how to optimize beam brightness over a range of currents (50-2000 mA argon equivalent). One concept initially accelerates millimeter size, milliamp beamlets to 1 MeV before merging them into centimeter size, ampere beams. Computer simulations have shown the final brightness of the merged beams is dominated by the emittance growth of the merging process, as long as the beamlets ion temperature is below a few eV. Thus, a RF multicusp source capable of high current density can produce beams with better brightness compared to ones extracted from a colder source with a large aperture and lower current density. As such, experiments have begun to develop a RF multicusp source capable of delivering one amp of extracted beam current. It is expected that it will require 10 kW of 13 MHz RF power delivered via a quartz shielded, one and half turn, four inch diameter antenna. Important considerations in the development of the source include the dependence of current density and beam ion temperature on consumed RF power and gas pressure. A fast rise time ({approx}100 ns) for the extracted beam pulse must also …

Today's restrictive environmental regulations encourage paper mills to close their water systems. Closed water systems increase the level of contaminants significantly. Accumulations of solid suspensions are detrimental to both the papermaking process and the final products. To remove these solids, technologies such as flotation using dissolved air (DAF), centrifuging, and screening have been developed. Dissolved Air Flotation systems are commonly used to clarify whitewater. These passive systems use high pressure to dissolve air into whitewater. When the pressure is released, air micro-bubbles form and attach themselves to fibers and particles, which then float to the surface where they are mechanically skimmed off. There is an economic incentive to explore alternatives to the DAF technology to drive down the cost of whitewater processing and minimize the use of chemicals. The installed capital cost for a DAF system is significant and a typical DAF system takes up considerable space. An alternative approach, which is the subject of this project, involves a dual method combining the advantages of chemical flocculation and in-line ultrasonic clarification to efficiently remove flocculated contaminants from a water stream

Over the past couple of decades, the Standard Model of high energy particle physics has clearly established itself as an invaluable tool in the analysis of high energy particle phenomenon. However, from a field theorists point of view, there are many dissatisfying aspects to the model. One of these, is the large number of free parameters in the theory arising from the Yukawa couplings of the Higgs doublet. In this thesis, we examine various issues relating to the Yukawa coupeng structure of high energy particle field theories. We begin by examining extensions to the Standard Model of particle physics which contain additional scalar fields. By appealing to the flavor structure observed in the fermion mass and Kobayashi-Maskawa matrices, we propose a reasonable phenomenological parameterization of the new Yukawa couplings based on the concept of approximate flavor symmetries. It is shown that such a parameterization eliminates the need for discrete symmetries which limit the allowed couplings of the new scalars. New scalar particles which can mediate exotic flavor changing reactions can have masses as low as the weak scale. Next, we turn to the issue of neutrino mass matrices, where we examine a particular texture which leads to matter independent neutrino …

We have undertaken a study of the feasibility of an innovative method for the determination of thermal properties of materials at extreme conditions. Our approach is essentiality an extension of the flash method to the geometry of the diamond-anvil cell and our ultimate goal is to greatly enlarge the pressure and temperature range over which thermal properties can be investigated. More specifically, we have performed test experiments to establish a technique for probing thermal diffusivity on samples of dimensions compatible with the physical constraints of the diamond anvil cell.

The status of the analysis of e{sup +}e{sup -} annihilation using the radiative return technique at BaBar is presented. Cross sections for the processes e{sup +}e{sup -} {yields} {pi}{sup +}{pi}{sup -}{pi}{sup 0}, {pi}{sup +}{pi}{sup -}{pi}{sup +}{pi}{sup -}, {pi}{sup +}{pi}{sup -}K{sup +}K{sup -}, K{sup +}K{sup -}K{sup +}K{sup -}, 3({pi}{sup +}{pi}{sup -}), {pi}{sup 0}{pi}{sup 0}2({pi}{sup +}{pi}{sup -}), K{sup +}K{sup -}2({pi}{sup +}{pi}{sup -}) and p{bar p} are measured in the energy range from threshold up to 4.5 GeV. Studies on resonant structures involved in these processes have been performed. We present also new precise measurements of the effective proton form factor and of the ratio of the electric to magnetic proton form factor, |G{sub E}/G{sub M}|. In addition, the J/{psi} and {psi}(2S) branching fractions to all these final states have been measured.

This document represents a progress report and renewal proposal for the contract DEAS 09 79 ER10434 between the USDOE and USC. During the time from 1 July 1979 to 1 March 1980, the large 35% intrinsic Ge detector was purchased and tested, and the new hyperpure Ge detector for positron end-point-energy measurements was designed and fabricated by ORTEC. It was delivered just prior to January 1, 1980. Measurements using this special equipment began in January 1980. During this period, a new effort in the measurement of short nuclear lifetimes was completed, and nuclear structure measurements of /sup 206/Rn nd /sup 208/Rn were completed. The results of these efforts are described in the text. A search for the Post Doctoral Research Associate was started last summer and the position will be filled on or about 1 March 1980. The first experiments to measure positron end-point-energies were proposed to the ORIC scheduling committee, and measurements will begin in March 1980. Theoretical efforts describe accurately the interference of annihilation radiation with positron end-point-energy measurements were begun.

We have completed both the installation of the demonstration project and the assessment of the stream flows in Watauga County, North Carolina. The 17 kW, high head (178'), project on Laurel Creek in Watauga County has produced about 60,000 kWh over its first nine months of operation despite some electrical and other problems. It is currently producing 16 to 17 kW on a steady basis and is functioning as a popular site for visits by people who plan to install their own similar plants in areas throughout the Southeast. The stream assessment proved to be less satisfactory than the subsequently developed method for predicting long term stream flows. The latter method has been applied to all western North Carolina and this report presents its general conclusions.

A geophysical characterization project was conducted at the BC Cribs and Trenches Area, located south of 200 East at the Hanford Site. The area consists of 26 waste disposal trenches and cribs, which received approximately 30 million gallons of liquid waste from the uranium recovery process and the ferrocyanide processes associated with wastes generated by reprocessing nuclear fuel. Waste discharges to BC Cribs contributed perhaps the largest liquid fraction of contaminants to the ground in the 200 Areas. The site also includes possibly the largest inventory of Tc-99 ever disposed to the soil at Hanford with an estimated quantity of 400 Ci. Other waste constituents included high volumes of nitrate and U-238. The geophysical characterization at the 50 acre site primarily included high resolution resistivity (HRR). The resistivity technique is a non-invasive method by which electrical resistivity data are collected along linear transects, and data are presented as continuous profiles of subsurface electrical properties. The transects ranged in size from about 400-700 meters and provided information down to depths of 60 meters. The site was characterized by a network of 51 HRR lines with a total of approximately 19.7 line kilometers of data collected parallel and perpendicular to the trenches …

We have developed cermet membranes that nongalvanically separate hydrogen from gas mixtures. The highest measured hydrogen flux was 16.2 cm{sup 3} (STP)/min-cm{sup 2} for an ANL-3a membrane at 900 C. For ANL-3 membranes with thickness of 0.04-0.5 mm, permeation rate is limited by the bulk diffusion of hydrogen through the metal phase. The effect of hydrogen partial pressure on permeation rate confirmed this conclusion and suggested that higher permeation rates may be obtained by decreasing the membrane thickness. Permeation rate in a syngas atmosphere for times up to 190 h showed no degradation in performance, which indicates that ANL-3 may be suitable for long-term, practical hydrogen separation.

This report presents an assessment of the efficiency and power density limitations of thermophotovoltaic (TPV) energy conversion systems for both ideal (radiative-limited) and practical (defect-limited) systems. Thermodynamics is integrated into the unique process physics of TPV conversion, and used to define the intrinsic tradeoff between power density and efficiency. The results of the analysis reveal that the selection of diode bandgap sets a limit on achievable efficiency well below the traditional Carnot level. In addition it is shown that filter performance dominates diode performance in any practical TPV system and determines the optimum bandgap for a given radiator temperature. It is demonstrated that for a given radiator temperature, lower bandgap diodes enable both higher efficiency and power density when spectral control limitations are included. The goal of this work is to provide a better understanding of the basic system limitations that will enable successful long-term development of TPV energy conversion technology.

The modification of the optical characteristics of a laser beam by a plasma is a key issue in laser-plasma coupling. it is critical to understand how this takes place, if we are ever to understand the interaction processes in the plasma corona as well as the coupling at super-high intensities--as when laser pulses approach Petawatt intensities. Interpreting and understanding parametric instabilities in laser-produced plasmas has been a problem of increasing complexity. Improvements in diagnostic capabilities in experimental studies, as well as refinements in the modeling (using different numerical techniques), are showing a complex scenario: strong interplay among instabilities, modification of the plasma conditions caused by the instabilities, and modification to the initial distribution of laser intensity inside the plasma. Of particular interest are stimulated Brillouin scattering (SBS) and stimulated Raman scattering (SRS), instabilities which have been studied extensively during the past 20 years, both theoretically and experimentally. Until now, most studies--mainly driven by requirements associated with inertial confinement fusion (ICF)--have concentrated on backscattering instabilities. The role of forward instabilities has not received much attention, despite having the potentials for strongly modifying the overall laser-plasma interaction region. The objective of this project is to study numerically the nonlinear enhancement of large-angle, …

The BaBar detector has operated over 200 2nd generation Resistive Plate Chambers (RPCs) in the forward endcap since 2002. Many chambers have increased noise rates and high voltage currents. These aging symptoms are correlated with the integrated RPC current as expected, but also depend on the rate and direction of the gas flow, indicating that pollutants produced in the gas can accelerate aging of downstream RPC surfaces. HF produced by decomposition of the Freon 134a component of the BaBar RPC gas in electric discharges has been proposed as the main pollutant. This paper presents measurements of HF production and absorption rates in BaBar RPCs. Since many of the highest rate chambers in the forward endcap were converted to avalanche mode operation, a comparison of HF production in streamer and avalanche mode RPCs is made. Correlations between the HF production rate and other chamber operating conditions were also explored.

Two fast running computer codes have been developed to calculate and verify the predictions of phenomenological models of beam emittance growth and radial oscillation damping. This report describes the codes - a point model, EMY, and a particle simulation, DESTIN. Comparison of model predictions and simulation results is made for the cases of a beam launched near self-pinch equilibrium and for a cold beam launched in near ballistic condition.

Recently revised estimates of target gain have added additional optimistic inputs to the interface between targets, accelerators and fusion chamber beam transport. But it remains valid that neutralization of the beams in the fusion chamber is useful if ion charge state Z > 1 or if > 1 kA per beamlet is to be propagated. Some engineering and economic considerations favor higher currents.

This report covers the research progress made during the calendar year 1992. The new results obtained during this period are described, keyed to the references listed on the last two pages of this report.

This report covers the research progress made during the calendar year 1992. The new results obtained during this period are described, keyed to the references listed on the last two pages of this report.

Advanced Research Projects Agency-Energy project sheet summarizing general information about the Building Energy Efficiency Through Innovative Thermodevices (BEETIT) program including critical needs, innovation and advantages, impacts, and contact information. This sheet discusses air conditioning that has increased electrical efficiency as part of the "Cascade Reverse Osmosis and the Absorption Osmosis Cycle" project.

The PVMaT 5A2 program at ASE Americas is a three-year program that addresses topics in the development of manufacturing systems, low-cost processing approaches, and flexible manufacturing methods. The three-year objectives are as follows: (1) implementation of computer-aided manufacturing systems, including Statistical Process Control, to aid in electrical and mechanical yield improvements of 10%, (2) development and implementation of ISO 9000 and ISO 14000, (3) deployment of wafer production from large-diameter (up to 1 m) EFG cylinders and wafer thicknesses down to 95 microns, (4) development of low-damage, high-yield laser-cutting methods for thin wafers, (5) cell designs for >15% cell efficiencies on 100-micron-thick EFG wafers, (6) development of Rapid Thermal Anneal processing for thin high-efficiency EFG cells, and (7) deployment of flexible manufacturing methods for diversification in wafer size and module design. In the second year of this program, the significant accomplishments in each of three tasks that cover these areas are as follows: Task 4-Manufacturing systems, Task 5-Low-cost processes, and Task 6-Flexible manufacturing.

The primary objectives of this proposal was to define the subset of proteins required for the ionizing radiation (IR) resistance of Deinococcus radiodurans R1, characterize the activities of those proteins, and apply what was learned to problems of interest to the Department of Energy.

In the modern urban setting, most individuals spend about 80% of their time indoors and are therefore exposed to the indoor environment to a much greater extent than to the outdoors (Lebowitz 1992). Concomitant with this increased habitation in urban buildings, there have been numerous reports of adverse health effects related to indoor air quality (IAQ) (sick buildings). Most of these buildings were built in the last two decades and were constructed to be energy-efficient. The quality of air in the indoor environment can be altered by a number of factors: release of volatile compounds from furnishings, floor and wall coverings, and other finishing materials or machinery; inadequate ventilation; poor temperature and humidity control; re-entrainment of outdoor volatile organic compounds (VOCs); and the contamination of the indoor environment by microbes (particularly fungi). Armstrong Laboratory (1992) found that the three most frequent causes of IAQ are (1) inadequate design and/or maintenance of the heating, ventilation, and air-conditioning (HVAC) system, (2) a shortage of fresh air, and (3) lack of humidity control. A similar study by the National Institute for Occupational Safety and Health (NIOSH 1989) recognized inadequate ventilation as the most frequent source of IAQ problems in the work environment (52% …

This note provides details of the 5th Extremely Large Databases Conference and Invitational Workshop that were held in 2011 on 18-19 October and 20 October, respectively, at the SLAC National Accelerator Laboratory in Menlo Park, California. The main goals of the conference were: (1) Encourage and accelerate the exchange of ideas between users trying to build extremely large databases worldwide and database solution providers; (2) Share lessons, trends, innovations, and challenges related to building extremely large databases; (3) Facilitate the development and growth of practical technologies for extremely large databases; and (4) Strengthen, expand, and engage the XLDB community.

This test report summarizes testing activities and documents the results of the load tests performed on-site and off-site to structural qualify the 52-inch equipment containers designed and fabricated under Project W-320.

This project was inspired and motivated by the need to provide better platforms for persistent surveillance. In the years since the inception of this work, the need for persistence of surveillance platforms has become even more widely appreciated, both within the defense community and the intelligence community. One of the most demanding technical requirements for such a platform involves the power plant and energy storage system, and this project concentrated almost exclusively on the technology associated with this system for a solar powered, high altitude, unmanned aircraft. An important realization for the feasibility of such solar powered aircraft, made at the outset of this project, was that thermal energy may be stored with higher specific energy density than for any other known practical form of rechargeable energy storage. This approach has proved to be extraordinarily fruitful, and a large number of spin-off applications of this technology were developed in the course of this project.