Sample preparation is always a critical step in study of micrometer sized astromaterials available for study in the laboratory, whether their subsequent analysis is by electron microscopy or secondary ion mass spectrometry. A focused beam of gallium ions has been used to prepare electron transparent sections from an interplanetary dust particle, as part of an integrated analysis protocol to maximize the mineralogical, elemental, isotopic and spectroscopic information extracted from one individual particle. In addition, focused ion beam techniques have been employed to extract cometary residue preserved on the rims and walls of micro-craters in 1100 series aluminum foils that were wrapped around the sample tray assembly on the Stardust cometary sample collector. Non-ideal surface geometries and inconveniently located regions of interest required creative solutions. These include support pillar construction and relocation of a significant portion of sample to access a region of interest. Serial sectioning, in a manner similar to ultramicrotomy, is a significant development and further demonstrates the unique capabilities of focused ion beam microscopy for sample preparation of astromaterials.

The usefulness of remotely sensed surface data depends on the ability to correct for atmospheric pertubations on the image. An atmospheric correction algorithm has been proposed which removes atmospheric pertubations from off-nadir measured radiances at the top of the atmosphere in the visible and near-infrared wavelength region. The ability of the model to reproduce radiance distributions at the surface from radiances at the top of the atmosphere is tested and found to be better than 15%. The correction formalism requires as minimum information the total optical depth of the atmosphere and the surface albedo. In this study the accuracy of the model to assumptions about the aerosol phase function, the single-scattering albedo and the vertical profile of the optical depth is also tested.

This report discusses the report discusses whether the MICE absorbers can be characterized to {+-}0.3 percent, so that one predict absorber ionization cooling within the absorber. This report shows that most solid absorbers can be characterized to much better than {+-}0.3 percent. The two issues that dominate the characterization of the liquid cryogen absorbers are the dimensions of the liquid in the vessel and the density of the cryogenic liquid. The thickness of the window also plays a role. This report will show that a liquid hydrogen absorber can be characterized to better than {+-}0.3 percent, but a liquid helium absorber cannot be characterized to better and {+-}1 percent.

This document presents information about a fire that occurred in January 1996 at Lawrence Livermore National Laboratory. This fire was caused by the spontaneous combustion of 100% fuming nitric acid. Topics discussed include: Summary of the incident; technical background; procedural background; supervision; previous incidents with 100% fuming nitric acid; and judgment of potential hazards.

This technical progress letter contains reports from six Technical Department divisions at the Hanford Engineer Works for February 9, through February 15, 1947. The six reporting divisions are: 100 Areas, 300 Area, 200 Areas, Chemical Development, Laboratories, and Statistical Studies.

This document details activities of the irradiation processing department during the month of January 1959. A general summary is included at the start of the report, after which the report is divided into the following sections: Research and Engineering Operations; Production and Reactor Operations; Facilities Engineering operation; Employee Relations Operation; and Financial Operation.

The systematic study and characterization of surface indications has never been conducted. Producers and users of castings do not have any data on which they can reliably communicate the nature of these indications or their effect on the performance of parts. Clearly, the ultimate intent of any work in this area is to eliminate indications that do in fact degrade properties. However, it may be impractical physically and/or financially to eliminate all surface imperfections. This project focused on the ones that actually degrade properties. The initial work was to identify those that degrade properties. Accurate numerical simulations of casting service performance allow designers to use the geometric flexibility of castings and the superior properties of steel to produce lighter weight and more energy efficient components for transportation systems (cars and trucks), construction, and mining. Accurate simulations increase the net melting energy efficiency by improving casting yield and reducing rework and scrap. Conservatively assuming a 10% improvement in yield, approximately 1.33 x 1012 BTU/year can be saved with this technology. In addition, CO2 emissions will be reduced by approximately 117,050 tons per year.

This report provides information required to be reported annually by the Washington Administrative Code (WAC) 173-303-071 (3)(r)(ii)(F) and (3)(s)(ix) on the treatability studies conducted on the Hanford Site in 2000. These studies were conducted as required by WAC 173-303-071, "Excluded Categories of Waste," sections (3)(r) and (s). Unless otherwise noted, the waste samples were provided by and the treatability studies were performed for the U.S. Department of Energy, Richland Operations Office, P.O. Box 550, Richland, Washington 99352. The U.S. Environmental Protection Agency identification number for these studies is WA7890008967.

Bulk chemical and oxygen, magnesium and silicon isotopic compositions were measured for each of 17 Types A and B refractory inclusions from CV3 chondrites. After bulk chemical compositions were corrected for non-representative sampling in the laboratory, the Mg and Si isotopic compositions of each inclusion were used to calculate its original chemical composition assuming that the heavy-isotope enrichments of these elements are due to Rayleigh fractionation that accompanied their evaporation from CMAS liquids. The resulting pre-evaporation chemical compositions are consistent with those predicted by equilibrium thermodynamic calculations for high-temperature nebular condensates but only if different inclusions condensed from nebular regions that ranged in total pressure from 10{sup -6} to 10{sup -1} bar, regardless of whether they formed in a system of solar composition or in one enriched in OC dust relative to gas by a factor of ten relative to solar composition. This is similar to the range of total pressures predicted by dynamic models of the solar nebula for regions whose temperatures are in the range of silicate condensation temperatures. Alternatively, if departure from equilibrium condensation and/or non-representative sampling of condensates in the nebula occurred, the inferred range of total pressure could be smaller. Simple kinetic modeling of evaporation …

None

The 241-Z treatment and storage tanks, a hazardous waste Treatment, Storage and Disposal (TSD) unit permitted pursuant to the ''Resource Conservation and Recovery Act of 1976'' (RCRA) and Washington State ''Hazardous Waste Management Act, RCW 70.105'', have been deactivated and are being actively decommissioned. The 241-Z TSD unit managed non-listed radioactive contaminated waste water, containing trace RCRA characteristic constituents. The 241-Z TSD unit consists of below grade tanks (D-4, D-5, D-7, D-8, and an overflow tank) located in a concrete containment vault, sample glovebox GB-2-241-ZA, and associated ancillary piping and equipment. The tank system is located beneath the 241-Z building. The 241-Z building is not a portion of the TSD unit. The sample glovebox is housed in the above-grade building. Waste managed at the TSD unit was received via underground mining from Plutonium Finishing Plant (PFP) sources. Tank D-6, located in the D-6 vault cell, is a past-practice tank that was taken out of service in 1972 and has never operated as a portion of the RCRA TSD unit. CERCLA actions address Tank D-6, its containment vault cell, and soil beneath the cell that was potentially contaminated during past-practice operations and any other potential past-practice contamination identified during 241-Z closure, …

This report reviews federal and state hazardous waste regulatory programs that govern the management of chemical weapons or chemical warfare agents. It addresses state programs in the eight states with chemical weapon storage facilities managed by the U.S. Army: Alabama, Arkansas, Colorado, Indiana, Kentucky, Maryland, Oregon, and Utah. It also includes discussions on 32 additional states or jurisdictions with known or suspected chemical weapons or chemical warfare agent presence (e.g., disposal sites containing chemical agent identification sets): Alaska, Arizona, California, Florida, Georgia, Hawaii, Idaho, Illinois, Iowa, Kansas, Louisiana, Massachusetts, Michigan, Mississippi, Missouri, Nebraska, Nevada, New Jersey, New Mexico, New York, North Carolina, Ohio, Pennsylvania, South Carolina, South Dakota, Tennessee, Texas, the U.S. Virgin Islands, Virginia, Washington, Washington, D.C., and Wyoming. Resource Conservation and Recovery Act (RCRA) hazardous waste programs are reviewed to determine whether chemical weapons or chemical warfare agents are listed hazardous wastes or otherwise defined or identified as hazardous wastes. Because the U.S. Environmental Protection Agency (EPA) military munitions rule specifically addresses the management of chemical munitions, this report also indicates whether a state has adopted the rule and whether the resulting state regulations have been authorized by EPA. Many states have adopted parts or all of the …

This report for January 1959, from the Chemical Processing Department at HAPO, discusses the following: Production operation; Purex and Redox operation; Finished products operation; maintenance: Financial operations; facilities engineering; research; and employee relations.

This report, for January 1964 from the Chemical Processing Department at HAPO, discusses the following: Production operation; Purex and Redox operation; Financial operations; facilities engineering; research; and employee relations. Weapons manufacturing operation; and safety and security.

This is the final report for the work done by our research group at the Atmospheric Sciences Research Center for the US DOE Atmopheric Radiation Measurement (ARM) Program. We were involved from the beginning of the ARM effort; we designed the Multi-filter Rotating Shadowband Spectroradiometer (MFRSR) which was widely deployed (and still operational in ARM) and through the years did a wide variety of data analysis on the returned data from these instruments. We also developed the Rotating Shadowband Spectroradiometer, which ARM deployed and also still deploys. Many scientific papers have been written using the data from these instruments, and the ongoing data streams remain part of the current ARM effort. Earlier reports contain our progress from previous grant periods, this report covers the last period and provides references to published work.

We have assembled an 8.4 GHz survey of bright, flat-spectrum ({alpha} > -0.5) radio sources with nearly uniform extragalactic (|b| > 10{sup o}) coverage for sources brighter than S{sub 4.8 GHz} = 65 mJy. The catalog is assembled from existing observations (especially CLASS and the Wright et al. PMN-CA survey), augmented by reprocessing of archival VLA and ATCA data and by new observations to fill in coverage gaps. We refer to this program as CRATES, the Combined Radio All-sky Targeted Eight GHz Survey. The resulting catalog provides precise positions, sub-arcsecond structures, and spectral indices for some 11,000 sources. We describe the morphology and spectral index distribution of the sample and comment on the survey's power to select several classes of interesting sources, especially high energy blazars. Comparison of CRATES with other high-frequency surveys also provides unique opportunities for identification of high-power radio sources.

This statement presented to the Subcommittee on Natural Resources of the US House of Representatives gives a definition of acid rain, presents new data on the regional and temporal nature of the problem, and discusses research needs. (ACR)

We welcome the Comment by Lerche et al on our recent paper titled "A new derivation of the plasma susceptibility tensor for a hot magnetized plasma without infinite sums of products of Bessel functions." The Comment brings up additional historical facts about previous research on the infinite sums of products of Bessel functions appearing in the plasma susceptibility.

None

The objective of this program, Part 2 of the Silicon Materials Task, is to develop and define purity requirements for solar cell grade (SG) silicon material by evaluating the effects of specific impurities and impurity levels on the performance of silicon solar cells. The basic approach of the program is to establish, as unambiguously as possible, what concentrations of the impurities commonly found in silicon starting material (metallurgical grade silicon) can be tolerated in silicon crystals produced by both the standard Czochralski and the dendritic-web sheet (rapid growth) methods without degrading solar cell performance. The program is on schedule in all elements. Specifically the growth, evaluation, solar cell fabrication and testing are completed for the baseline boron-doped Czochralski material. Cell efficiencies are in the 11 to 13 percent range (AM1). The growth of six first generation Czochralski crystals (boron doping plus Cr, Mn, Cu, Ni, V, and Ti) is completed. Solar cell measurements on four of the first doubly-doped ingots indicate that Cr and Mn seriously degrade cell performance at the 10/sup 15/ cm/sup -3/ doping level while neither Ni nor Cu produce any significant reduction in cell efficiency. The results for Ni can be rationalized on the basis of …

In this paper we discuss aspects of a comprehensive program to identify and bound potential effects of microorganisms on long-term nuclear waste containment, using as examples, studies conducted within the Yucca Mountain Project. A comprehensive program has been formulated which cuts across standard disciplinary lines to address the specific concerns of microbial activity in a radioactive waste repository. Collectively, this program provides bounding parameters of microbial activities that modify the ambient geochemistry and hydrology, modify corrosion rates, and transport and transform radionuclides under conditions expected to be encountered after geological waste emplacement. This program is intended to provide microbial reaction rates and bounding conditions in a form that can be integrated into existing chemical and hydrological models. The inclusion of microbial effects will allow those models to more accurately assess long term repository integrity.

The impacts of the native and introduced bacteria on the performance of geologic nuclear waste disposal facilities should be evaluated because these bacteria could promote corrosion of repository components and alteration of chemical and hydrological properties of the surrounding engineered and rock barriers. As a first step towards investigating these potentialities, native and introduced bacteria obtained from post-construction Yucca Mountain (YM) rock were isolated under varying conditions, including elevated temperature, low nutrient availability, and the absence of available oxygen. Individual isolates are being screened for activities associated with microbially induced corrosion of metals (MIC). Preliminary determination of growth rates of whole YM microbial communities under varying conditions was also undertaken.

Large quantities of Defense related spent nuclear fuels are being stored in water basins around the United States. Under the non-proliferation policy, there has been no processing since the late 1980`s and these fuels are caught in the pipeline awaiting stabilization or other disposition. At the Savannah River Site, over 200 metric tons of aluminum clad fuel are being stored in four water filled basins. Some of this fuel has experienced visible pitting corrosion. An intensive effort is underway at SRS to understand the corrosion problems and to improve the basin storage conditions for extended storage requirements. Significant improvements have been accomplished during 1993-1996. This paper presents a discussion of the fundamentals of aluminum alloy corrosion as it pertains to the wet storage of spent nuclear fuel. It examines the effects of variables on corrosion in the storage environment and presents the results of corrosion surveillance testing activities at SRS, as well as discussions of fuel storage basins at other production sites of the Department of Energy.

A water source heat pump has been designed that is capable of operating over the range from 40 to 110/sup 0/F entering water temperature and has a heating coefficient of performance greater than six in the upper portion of this range. A computerized heat pump balance program was written to allow the performance of either a water-to-water or a water-to-air heat pump to be predicted in either the heating or cooling mode. A detailed program description, flow charts, and sample outputs are appended. The balance program was used to specify components for a high efficiency water-to-water and a high efficiency water-to-air heat pump. Performance predictions for both units in heating and in cooling are included. The water-to-water and water-to-air performance predictions were compared. The water-to-air approach was clearly superior. A detailed design and layout was done for the three solar-assisted water-to-air heat pump. A horizontal configuration was chosen for marketability reasons. The design was made consistent with high quantity production equipment available in our factories and should result in the lowest possible manufacturing cost. A key question to be answered in this project is whether a reciprocating compressor can operate without damage at the high suction pressures characteristic to the …