Lodestar has been an active participant in the low power Collective Thomson Scattering (CTS) diagnostic at TFTR in collaboration with MIT. Extensive studies were conducted regarding the use of gyrotron scattering as a low cost diagnostic for both energetic ions and alpha particles on TFTR. The numerical scattering code has been improved and compared with similar code developed at JET. The authors have participated and assisted in the CTS experiments through onsite visits and have successfully performed most of the data analysis tasks remotely. Through their analysis on the initial data base accumulated, they are able to understand qualitatively the general features of the anomalous large scattered signal, have proposed an explanation for its generation mechanism, and have suggested a potential new use of CTS as an edge diagnostic.

The objective of the program was to demonstrate and verify Certification-by-Analysis (CBA) capability for wind turbine blades made from advanced lightweight composite materials. The approach integrated durability and damage tolerance analysis with robust design and virtual testing capabilities to deliver superior, durable, low weight, low cost, long life, and reliable wind blade design. The GENOA durability and life prediction software suite was be used as the primary simulation tool. First, a micromechanics-based computational approach was used to assess the durability of composite laminates with ply drop features commonly used in wind turbine applications. Ply drops occur in composite joints and closures of wind turbine blades to reduce skin thicknesses along the blade span. They increase localized stress concentration, which may cause premature delamination failure in composite and reduced fatigue service life. Durability and damage tolerance (D&DT) were evaluated utilizing a multi-scale micro-macro progressive failure analysis (PFA) technique. PFA is finite element based and is capable of detecting all stages of material damage including initiation and propagation of delamination. It assesses multiple failure criteria and includes the effects of manufacturing anomalies (i.e., void, fiber waviness). Two different approaches have been used within PFA. The first approach is Virtual Crack Closure Technique …

The family of ternary compounds of composition InxGa1-xAs are of considerable interest for thermophotovoltaic energy converters. The recombination lifetimes of the various compositions are critical to the successful application of these materials as efficient converters. Here we will describe experimental results on the composition. In0.53Ga0.47 that is lattice-matched to InP. We will also describe lifetime results on the compositions In0.68Ga0.32As, with bandgap of 0.60 eV to compositions In0.78Ga0.22As with a bandgap of 0.50 eV. Double heterostructure confinement devices have been made over a range of both n- and p-type doping. These results are preliminary, but the goal is to obtain the radiative and Auger recombination coefficients for the alloys in this composition range.

We report the design and current status of a monoenergetic laser-based Compton scattering 0.5-2.5 MeV {gamma}-ray source. Previous nuclear resonance fluorescence results and future linac and laser developments for the source are presented. At MeV photon energies relevant for nuclear processes, Compton scattering light sources are attractive because of their relative compactness and improved brightness above 100 keV, compared to typical 4th generation synchrotrons. Recent progress in accelerator physics and laser technology have enabled the development of a new class of tunable Mono-Energetic Gamma-Ray (MEGa-Ray) light sources based on Compton scattering between a high-brightness, relativistic electron beam and a high intensity laser pulse produced via chirped-pulse amplification (CPA). A new precision, tunable gamma-ray source driven by a compact, high-gradient X-band linac is currently under development and construction at LLNL. High-brightness, relativistic electron bunches produced by an X-band linac designed in collaboration with SLAC will interact with a Joule-class, 10 ps, diode-pumped CPA laser pulse to generate tunable {gamma}-rays in the 0.5-2.5 MeV photon energy range via Compton scattering. Based on the success of the previous Thomson-Radiated Extreme X-rays (T-REX) Compton scattering source at LLNL, the source will be used to excite nuclear resonance fluorescence lines in various isotopes; applications include …

I present some of the current ideas about a Very Large Hadron Collider [1] which could eventually extend the high energy frontier beyond that of the Large Hadron Collider (LHC) or any other machine seriously conceived at this time.

Recent improvements in computer hardware and software for the acquisition, storage and analysis of series of spectra and images allow for a change in strategy for quantitative microanalysis. For example, in the area of X-ray microanalysis, whereas compositional analysis and elemental distributions have been traditionally performed using point microanalysis and simple intensity mapping from a ROI, respectively, the two tasks are now routinely performed simultaneously through X-ray spectrum-imaging, where full spectra are acquired from pixels in a two-dimensional array of points on the specimen. Commercially available software now allows for the acquisition and storage of such spectrum-images, perhaps comprising as much as 100 MBytes of data or more. A variety of post-acquisition processing tools are provided by the developer to allow the extraction of both X-ray intensity maps, with or without rudimentary background subtraction, or full spectra from pixels of interest. In order to maximize the extraction of information from these large data sets, a number of linear and nonlinear methods are currently being explored that identify statistically significant variations among the series of spectra without a priori assumptions about the content of the data set. Among these methods, linear multivariate statistical analysis (MSA) has a number of significant advantages, …

This status report includes brief reports on measurements and calculations of quantities for nuclear data applications and data for reactor safety. Separate abstracts were prepared for those items with a significant amount of data. (RWR)

This report describes an innovative technology, laser ablation-inductively couple plasma-mass spectrometry (LA-ICP-MS), operated in a mobile laboratory, to rapidly detect thorium 230 activity levels in soil samples. This technology was demonstrated on-site during November 1993 at the Gunnison, Colorado, UMTRA project site in support of their remediation effort. The LA-ICP-MS sampling and analysis technique was chosen because of the capability for rapid analysis, approximately three samples per hour, with minimal sample preparation.

The goal of the Castle project was to provide a parallel programming environment that enables the construction of high performance applications that run portably across many platforms. The authors approach was to design and implement a multilayered architecture, with higher levels building on lower ones to ensure portability, but with care taken not to introduce abstractions that sacrifice performance.

Pressure drop tests were performed in the 189-D-Hydraulics Laboratory to determine the number of K-Reactor solid aluminum pieces (SAs) required to throttle the tube flow of a 46-piece KVE and a 38-piece KVN arch-rail I&E fuel charge to that of a corresponding bridge-rail charge. In addition, the effects on Panellit pressure and tube flow were determined for several cases.

Monthly newsletter discussing news and activities related to the Atmospheric Radiation Measurement Program, articles about weather and atmospheric phenomena, and other related topics.

This work develops and demonstrates a laboratory-scale high temperature natural gas furnace that can operate with/without oxygen enrichment to significantly improve energy efficiency and reduce emissions. The laboratory-scale is 5ft in diameter & 8ft tall. This furnace was constructed and tested. This report demonstrates the efficiency and pollutant prevention capabilities of this test furnace. The project also developed optical detection technology to control the furnace output.

The Advanced Accelerator Applications (AAA) Program was initiated in fiscal year 2001 (FY-01) by the U.S. Congress, the U.S. Department of Energy (DOE), and the Los Alamos National Laboratory (LANL) in partnership with other national laboratories. The AAA Project and the R&D for its underlying science and technology will require a large cadre of educated scientists and trained technicians in the future. In addition, other applications of nuclear science and engineering (e.g., proliferation monitoring and defense, nuclear medicine, safety regulation, industrial processes, and many others) require increased academic and national infrastructure and student populations. Thus, the DOE AAA Program Office has begun a multi-year program to involve university faculty and students in various phases of the Project to support the infrastructure requirements of nuclear energy, science and technology fields as well as the special needs of the DOE transmutation program. Herein I summarize the goals and accomplishments of the university programs that have supported the AAA Project during FY-01, including the involvement of more than eighty students.

This is one of two companion papers that describe the ENERGY-10 PV design-tool computer simulation program. The other paper is titled ''Hourly Simulation of Grid-Connected PV Systems Using Realistic Building Loads.'' While this paper focuses on the implementation method, the companion paper focuses on the PV aspects of the program. The case study in this paper is a residential building application, whereas the case study in the companion paper is a commercial application with an entirely different building load characteristic. Together, they provide a balanced view.

In earlier work, planar graphs of massless {phi}{sup 3} theory were summed with the help of the light cone world sheet picture and the mean field approximation. In the present article, the same methods are applied to the problem of summing planar bosonic open strings. They find that in the ground state of the system, string boundaries form a condensate on the world sheet, and a new string emerges from this summation. Its slope is always greater than the initial slope, and it remains non-zero even when the initial slope is set equal to zero. If they assume the initial string tends to a field a theory in the zero slope limit, this result provides evidence for string formation in field theory.

In the fabrication of the steam generator on APPR-1A it was considered necessary to roll the Type 430M tubes into carbon steel tubesheets to ASTM Specification A350-Grade LF-1, modifled with 1.66% nickel; and weld the tube ends to the stainless steel overlay previously applied to the tubesheet. The rolled joint was a necessary precaution to prevent secondary water, that might contain chlorides, from contacting the stainless steel weld joining the tubes to the tubesheets. The welded joint provided the mechanical strength for attaching the tubes to the tubesheets. A laboratory program was conducted, therefore, to develop practicable procedures for welding the Type 430M tubes to the stainless steel overlay; as well as to assure that the tubes could satisfactorily be rolled to the tubesheets. Automatic and manual tungstenare welding procedures were developed that were capable of consistently providing an austenitic weld having a strength exceeding that of the heat affected zone or the unaffected tube itself. Type 430M tubes in the asreceived, and softened conditions were rolled into prototype test units under various conditions of rolling. It was concluded that the Type 450M tubes in the as-received condition could be satisfactorily rolled into the A360Grade LF-1 tubesheet and be tlght …

This paper describes the design and performance of flashlamp-pumped, Nd:glass. Brewster-angle slab amplifiers intended to be deployed in the National Ignition Facility (NIF). To verify performance, we tested a full-size, three-slab-long, NIF prototype amplifier, which we believe to be the largest flashlamp-pumped Nd:glass amplifier ever assembled. Like the NIF amplifier design, this prototype amplifier had eight 40-cm-square apertures combined in a four-aperture-high by two-aperture-wide matrix. Specially-shaped reflectors, anti-reflective coatings on the blastshields, and preionized flashlamps were used to increase storage efficiency. Cooling gas was flowed over the flashlamps to remove waste pump heat and to accelerate thermal wavefront recovery. The prototype gain results are consistent with model predictions and provide high confidence in the final engineering design of the NIF amplifiers. Although the dimensions, internal positions, and shapes of the components in the NIF amplifiers will be slightly different from the prototype, these differences are small and should produce only slight differences in amplifier performance

This project examined the internal architecture of delta front sandstones at two locations within the Turonian-age Wall Creek Member of the Frontier Formation, in Wyoming. The project involved traditional outcrop field work integrated with core-data, and 2D and 3D ground penetrating radar (GPR) imaging from behind the outcrops. The fluid-flow engineering work, handled through a collaborative grant given to PI Chris White at LSU, focused on effects on fluid flow of late-stage calcite cement nodules in 3D. In addition to the extensive field component, the work funded 2 PhD students (Gani and Lee) and resulted in publication of 10 technical papers, 17 abstracts, and 4 internal field guides. PI Bhattacharya also funded an additional 3 PhD students that worked on the Wall Creek sandstone funded separately through an industrial consortium, two of whom graduated in the fall 2006 ((Sadeque and Vakarelov). These additional funds provided significant leverage to expand the work to include a regional stratigraphic synthesis of the Wall Creek Member of the Frontier Formation, in addition to the reservoir-scale studies that DOE directly funded. Awards given to PI Bhattacharya included the prestigious AAPG Distinguished Lecture Award, which involved a tour of about 25 Universities and Geological Societies in …

None

In coolant system such as NPR's, the coolant activity level increase with each succeeding pass through the reactor flux until a saturation limit is reached. Therefore, the activity level of the NPR coolant system will be much higher than that of the old reactor once-through systems. This report is the determination of the specific activities (disintegrations/cc{center dot}sec) of the various coolant impurities which determine the total activity of the coolant system. 10 refs., 13 figs., 2 tabs.

The Waste Isolation Pilot Plant (WIPP) is an authorized US Department of Energy (DOE) research and development facility constructed near the city of Carlsbad in southeastern New Mexico. The facility is intended to demonstrate the safe disposal of transuranic (TRU) radioactive waste resulting from US defense activities. Under the WIPP Land Withdrawal Act of 1992 (LWA), federal lands surrounding the WIPP facility were withdrawn from all public use and the title of those lands was transferred to the Secretary of Energy. The DOE's TRU waste is stored, and in some cases is still being generated, at 10 large-quantity and 13 small-quantity sites across the US. After applicable certification requirements have been met, the TRU waste at these sites will be sent to the WIPP to initiate the disposal phase of the facility, which according to current planning is projected to last for approximately 35 years.

The low frequency variation in the three dimensional air temperature fields of two reanalyses and two model simulations are described. The data sets used are the monthly mean temperature fields for the NCAR Climate Simulation Model (CSM, Boville and Gent, 1998) 300 year run, a NCAR Community Climate Model version 3 (CCM3, Kiehl et al., 1998) AMIP type simulation, and the NCEPLNCAR and ECMWF (ERA) reanalysis data sets. The variances and correlations are computed for the anomalies from the annual cycle for each data set. In general the reanalyses and models agree fairly well on the structure of the temperature variance. The models tend to have too much variance at the surface compared to the reanalyses. The CSM's poor simulation of the SST in the eastern Pacific leads to a much reduced variance in the Nino3 region. The enhanced variability over land appears to affect the midlatitude simulation of the CSM in that the higher surface variability extends off the east coast of continents. This is not evident in CCM3 and reanalyses where the SSTs are prescribed. At 200 hPa the CCM3 and reanalyses all evince the dumb bell pattern straddling the Equator in the eastern Pacific attributed by Yulaeva …

The Advanced Modeling and Simulation Office within the DOE Office of Nuclear Energy (NE) has been charged with revolutionizing the design tools used to build nuclear power plants during the next 10 years. To accomplish this, the DOE has brought together the national laboratories, U.S. universities, and the nuclear energy industry to establish the Nuclear Energy Advanced Modeling and Simulation (NEAMS) Program. The mission of NEAMS is to modernize computer modeling of nuclear energy systems and improve the fidelity and validity of modeling results using contemporary software environments and high-performance computers. NEAMS will create a set of engineering-level codes aimed at designing and analyzing the performance and safety of nuclear power plants and reactor fuels. The truly predictive nature of these codes will be achieved by modeling the governing phenomena at the spatial and temporal scales that dominate the behavior. These codes will be executed within a simulation environment that orchestrates code integration with respect to spatial meshing, computational resources, and execution to give the user a common 'look and feel' for setting up problems and displaying results. NEAMS is building upon a suite of existing simulation tools, including those developed by the federal Scientific Discovery through Advanced Computing and …

The possibility of an intense proton facility, at 'Project X' or elsewhere, will provide many new opportunities for searches for physics beyond the Standard Model. A Project X can serve a yet broader role in the search for new physics, and in this note we highlight the manner in which thus-enabled studies of the flavor structure of the proton, particularly of its intrinsic heavy quark content, facilitate other direct and indirect searches for new physics. Intrinsic heavy quarks in both light and heavy hadrons play a key role in searches for physics BSM with hadrons - and their study at the Intensity Frontier may prove crucial to establishing its existence.