GLAST Large Area Telescope (LAT) is a gamma ray telescope instrumented with silicon-strip detector planes and sheets of converter, followed by a calorimeter (CAL) and surrounded by an anticoincidence system (ACD). This instrument is sensitive to gamma rays in the energy range between 20 MeV and 300 GeV. At present, the first towers have been integrated and pre-launch data taking with cosmic ray muons is being performed. The results from the data analysis carried out during LAT integration will be discussed and a comparison with the predictions from the Monte Carlo simulation will be shown.

To evaluate the efficacy of bioimmobilization of Cr(VI) in groundwater at the Department of Energy Hanford site, we conducted a series of microcosm experiments using a range of commercial electron donors with varying degrees of lactate polymerization (polylactate). These experiments were conducted using Hanford Formation sediments (coarse sand and gravel) immersed in Hanford groundwater, which were amended with Cr(VI) and several types of lactate-based electron donors (Hydrogen Release Compound, HRC; primer-HRC, pHRC; extended release HRC) and the polylactate-cysteine form (Metal Remediation Compound, MRC). The results showed that polylactate compounds stimulated an increase in bacterial biomass and activity to a greater extent than sodium lactate when applied at equivalent carbon concentrations. At the same time, concentrations of headspace hydrogen and methane increased and correlated with changes in the microbial community structure. Enrichment of Pseudomonas spp. occurred with all lactate additions, and enrichment of sulfate-reducing Desulfosporosinus spp. occurred with almost complete sulfate reduction. The results of these experiments demonstrate that amendment with the pHRC and MRC forms result in effective removal of Cr(VI) from solution most likely by both direct (enzymatic) and indirect (microbially generated reductant) mechanisms.

The combination of Anti-de Sitter space (AdS) methods with light-front holography leads to a semi-classical first approximation to the spectrum and wavefunctions of meson and baryon light-quark bound states. Starting from the bound-state Hamiltonian equation of motion in QCD, we derive relativistic light-front wave equations in terms of an invariant impact variable {zeta} which measures the separation of the quark and gluonic constituents within the hadron at equal light-front time. These equations of motion in physical space-time are equivalent to the equations of motion which describe the propagation of spin-J modes in anti-de Sitter (AdS) space. Its eigenvalues give the hadronic spectrum, and its eigenmodes represent the probability distribution of the hadronic constituents at a given scale. Applications to the light meson and baryon spectra are presented. The predicted meson spectrum has a string-theory Regge form M{sup 2} = 4{kappa}{sup 2}(n+L+S/2); i.e., the square of the eigenmass is linear in both L and n, where n counts the number of nodes of the wavefunction in the radial variable {zeta}. The space-like pion form factor is also well reproduced. One thus obtains a remarkable connection between the description of hadronic modes in AdS space and the Hamiltonian formulation of QCD in …

It is an important question whether the final/initial state gluonic interactions which lead to naive-time-reversal-odd single-spin asymmetries and diffraction at leading twist can be associated in a definite way with the light-front wave function hadronic eigensolutions of QCD. We use light-front time-ordered perturbation theory to obtain augmented light-front wave functions which contain an imaginary phase which depends on the choice of advanced or retarded boundary condition for the gauge potential in light-cone gauge. We apply this formalism to the wave functions of the valence Fock states of nucleons and pions, and show how this illuminates the factorization properties of naive-time-reversal-odd transverse momentum dependent observables which arise from rescattering. In particular, one calculates the identical leading-twist Sivers function from the overlap of augmented light-front wavefunctions that one obtains from explicit calculations of the single-spin asymmetry in semi-inclusive deep inelastic lepton-polarized nucleon scattering where the required phases come from the final-state rescattering of the struck quark with the nucleon spectators.

We present a detailed ARPES investigation of the RTe{sub 3} family, which sets this system as an ideal 'textbook' example for the formation of a nesting driven Charge Density Wave (CDW). This family indeed exhibits the full range of phenomena that can be associated to CDW instabilities, from the opening of large gaps on the best nested parts of Fermi Surface (FS) (up to 0.4eV), to the existence of residual metallic pockets. ARPES is the best suited technique to characterize these features, thanks to its unique ability to resolve the electronic structure in k-space. An additional advantage of RTe{sub 3} is that the band structure can be very accurately described by a simple 2D tight-binding (TB) model, which allows one to understand and easily reproduce many characteristics of the CDW. In this paper, we first establish the main features of the electronic structure, by comparing our ARPES measurements with Linear Muffin-Tin Orbital band calculations. We use this to define the validity and limits of the TB model. We then present a complete description of the CDW properties and, for the first time, of their strong evolution as a function of R. Using simple models, we are able to reproduce perfectly …

Over the past half-century, the Applied Mathematics program in the U.S. Department of Energy's Office of Advanced Scientific Computing Research has made significant, enduring advances in applied mathematics that have been essential enablers of modern computational science. Motivated by the scientific needs of the Department of Energy and its predecessors, advances have been made in mathematical modeling, numerical analysis of differential equations, optimization theory, mesh generation for complex geometries, adaptive algorithms and other important mathematical areas. High-performance mathematical software libraries developed through this program have contributed as much or more to the performance of modern scientific computer codes as the high-performance computers on which these codes run. The combination of these mathematical advances and the resulting software has enabled high-performance computers to be used for scientific discovery in ways that could only be imagined at the program's inception. Our nation, and indeed our world, face great challenges that must be addressed in coming years, and many of these will be addressed through the development of scientific understanding and engineering advances yet to be discovered. The U.S. Department of Energy (DOE) will play an essential role in providing science-based solutions to many of these problems, particularly those that involve the energy, …

None

Colloids have the potential to transport strongly sorbing radionuclide contaminants in soils and groundwater aquifers. Recent studies from the Nevada Test Site have indicated the enhanced mobility plutonium, albeit in minute quantities, associated with various silicate minerals (Kersting et al., 1999); however, significant colloidal transport of thorium (Th) and rare earths (RE) in nature, considered to be chemical analogs for plutonium, is rare. Yet, the current Yucca Mountain model for colloids would have predicted extensive Th- and RE migration, given these phases' association with clay minerals. Several studies have pointed to the effect of water flow rate on colloid and particulate migration. In this paper, we examine the benefit of relating water flow rate and the wasteform alteration structure to colloid release.

This report provides Source and Special Nuclear Material composition of Ending Inventory Reports for the month of January, 1967.

The National Renewable Energy Laboratory's National Wind Technology Center (NWTC) has refocused its wind turbine design-code comparison effort to verify FAST{_}AD with ADAMS. FAST{_}AD is a wind turbine structural-response code developed by Oregon State University for the NWTC. ADAMS is a commercial, general-purpose, multibody-dynamics code developed by Mechanical Dynamics, Inc. ADAMS, which is used in many industries, has been rigorously tested. Both ADAMS and FAST{_}AD use the AeroDyn subroutine package for calculating aerodynamic forces. The University of Utah developed AeroDyn for the NWTC. To compare FAST{_}AD to ADAMS, we modeled a rough approximation of the AWT-27 P4 turbine, using the same properties for both simulators. The AWT-27 is a 275-kilowatt (kW), two-bladed wind turbine. We also created three-bladed versions of the turbine models to verify FAST{_}AD for three-bladed turbines. In this paper, we list the aerodynamic features used in the comparison. We also explain how the programs model the turbine structure, describe the degrees of freedom (DOFs) used for this study, and present simulation comparisons that show very good agreement.

The overall purpose of this project is to evaluate the biological and economic feasibility of restoring high-quality forests on mined land, and to measure carbon sequestration and wood production benefits that would be achieved from forest restoration procedures. During the reporting period (October-December 2004) we completed the validation of a forest productivity classification model for mined land. A coefficient of determination (R{sup 2}) of 0.68 confirms the model's ability to predict SI based on a selection of mine soil properties. To determine carbon sequestration under different forest management scenarios, a field study was installed as a 3 x 3 factorial in a random complete block design with three replications at each of three locations, Ohio (Figure 1), West Virginia (Figure 2), and Virginia (Figure 3). The treatments included three forest types (white pine, hybrid poplar, mixed hardwood) and three silvicultural regimes (competition control, competition control plus tillage, competition control plus tillage plus fertilization). For hybrid poplar, total plant biomass differences increased significantly with the intensity of silvicultural input. Root, stem, and foliage biomass also increased with the level of silvicultural intensity. Financial feasibility analyses of reforestation on mined lands previously reclaimed to grassland have been completed for conversion to white …

Machining was completed on the s-tube flow element, and a spring, for use at a constant known temperature, was constructed for the flow element. Calculations for geometry factor, detector efficiency, and effective absorption along the useful radiation path were completed for the reed densitometer. The flow rate control was calibrated and performed satisfactorily. Response to step transient changes occurred with a damping constant of about 0.6 and an effective response time of 10 sec. Sources of error in the s-tube flow rate measurements are discussed. (M.C.G.)

None

None

The development of a suitable photocathode for use in a high average current photoinjector at temperatures ranging from 273 K down to 2 K is a subject of considerable interest, and active research. The choice of photocathode material is often a trade-off made based on the quantum efficiency of the cathode material, the tolerance to adverse vacuum conditions, and the laser wavelength needed to produce photoelectrons. In this paper an overview of the BNL work to date on CsK{sub 2}Sb photocathodes on a variety of substrates, irradiated at multiple wavelengths, and at temperatures down to 170 K will be discussed. The application of this photocathode material into a SRF photoinjector will also be discussed.

The Aerial Measurement System (AMS) Helicopter Emergency Response Acquisition System provides a thorough and economical means to identify and characterize the contaminants for large area radiological surveys. The helicopter system can provide a 100-percent survey of an area that qualifies as a scoping survey under the Multi-Agency Radiation Survey and Site Investigation Manual (MARSSIM) methodology. If the sensitivity is adequate when compared to the clean up values, it may also be used for the characterization survey. The data from the helicopter survey can be displayed and manipulated to provide invaluable data during remediation activities.

In numerous instances the graphite growth in the older piles has deformed the horizontal control rod holes with a resultant jamming of the rods and overstressing of the rods and thimbles. In addition, special operating procedures to maintain very low differential pressures are required with the present allowed maximum graphite temperatures to prevent collapse of the thimbles because of loss of strength at this temperature. This is currently a limit to the power level of the H Pile. This report discusses a new rod tip and seal which have been developed to allow the removal of the thimble and permit sealing at the pile face. This will allow advantage to be taken of any future increases in maximum graphite temperature with proportional increases in allowable power.

Progress Development of a high temperature, vaporfilled thermionic converter for application with a nuclear reactor for space-vehicle electrical power generation is reported. Problems associated with the design and opera tion of a thermionic converter employing a UC-ZrC emitter, a cesium plasma for space charge neutralization, and a high-temperature collector are described. Emitter fabrication techniques are also described. A test cell employing a cylindrical UC-ZrC emitter, which was pressure bonded to a tantalum sleeve, and a low- temperature copper collector, was fabricated and operated for 400 hours to provide experimental data. The emitter was operated at temperatures of the order of 2000 deg C while the collector temperature was maintained at 200 to 300 deg C. A conceptual design for a thermionic power reactor incorporating the thermionic converter under development is also studied. It was concluded that a thermionic fuel element would be about 20 inches long and 0.68 inch in diameter and would incorporate 1O thermionic cells. The load voltage per fuel element would be about 14.5 volts and two elements would be connected in parallel (electrically) to provide an output of 29 volts. The over-all design would provide an electrical power level of approximately one megawatt. (auth)

Satellite measurements should contribute to a fuller understanding of the physical processes behind the radiation budget, exchange processes, and global change. Climate engineering requires global observation for early indications of predicted effects, which puts a premium on affordable, distributed constellations of satellites with effective, affordable sensors. Defense has a requirement for continuous global surveillance for warning of aggression, which could evolve from advanced sensors and satellites in development. Many climate engineering needs match those of defense technologies.

The requirements for intercept have been defined. Most can be met with existing technology. Them are significant uncertainties in coupling efficiency and fragmentation limits. The best approach depends on warning, NEO size and composition, and cost. Optimal defenses generally involve both detection and defense. They are effective to large diameters and justify expenditures on the order of $50-100M/yr. Flyby and landing precursor experiments are scientifically justified. Coupling and deflection experiments are also needed and feasible.

Mycobacterium tuberculosis, the cause of TB, is a devastating human pathogen. The emergence of multi-drug resistance in recent years has prompted a search for new drug targets and for a better understanding of mechanisms of resistance. Here we focus on the gene product of an open reading frame from M. tuberculosis, Rv1347c, which is annotated as a putative aminoglycoside N-acetyltransferase. The Rv1347c protein does not show this activity, however, and we show from its crystal structure, coupled with functional and bioinformatic data, that its most likely role is in the biosynthesis of mycobactin, the M. tuberculosis siderophore. The crystal structure of Rv1347c was determined by MAD phasing from selenomethionine-substituted protein and refined at 2.2 {angstrom} resolution (R = 0.227, R{sub free} = 0.257). The protein is monomeric, with a fold that places it in the GCN5-related N-acetyltransferase (GNAT) family of acyltransferases. Features of the structure are an acylCoA binding site that is shared with other GNAT family members, and an adjacent hydrophobic channel leading to the surface that could accommodate long-chain acyl groups. Modeling the postulated substrate, the N{sup {var_epsilon}}-hydroxylysine side chain of mycobactin, into the acceptor substrate binding groove identifies two residues at the active site, His130 and Asp168, …

Public participation in Office of Environmental Management (EM) activities throughout the DOE complex is a critical component of the overall success of remediation and waste management efforts. The challenges facing EM and its stakeholders over the next decade or more are daunting (Nuclear Waste News 1996). Achieving a mission composed of such challenges will require innovation, dedication, and a significant degree of good will among all stakeholders. EM's efforts to date, including obtaining and using inputs offered by EM stakeholders, have been notable. Public participation specialists have accepted and met challenges and have consistently tried to improve their performance. They have reported their experiences both formally and informally (e.g., at professional conferences and EM Public Participation Network Workshops, other internal meetings of DOE and contractor public participation specialists, and one-on-one consultations) in order to advance the state of their practice. Our research, and our field research in particular (including our interactions with many representatives of numerous stakeholder groups at nine DOE sites with diverse EM problems), have shown that it, is possible to develop coherent results even in a problem domain as complex as that of EM. We conclude that performance-based evaluations of public participation appear possible, and we have …

The study of the kinetics of layer growth in the aluminum -- nickel system and the effect thereon of applied pressure has been continued. Additional information has been obtained about the growth of the beta phase, and a method was developed whereby the kinetics of growth of the beta phase could be investigated. The implications of Vasileff's equations which provide the solution for interdiffusion in a three-phase two-component system have been examined semi-analytically, and quantitative insight has been gained into the kdnetics of interface movement. Finally, an investigation of the kinetics of interface movement and layer growth has been begun on systems which have less complicated phase equilibrium relationships than those existing in the aluminum -- nickel system. (auth)

The research undertaken in this LDRD-funded project addressed the joint development of magnetic material-based nonvolatile, radiation-hard memory cells with Sandia National Laboratory. Specifically, the goal of this project was to demonstrate the intrinsic radiation-hardness of Giant Magneto-Resistive (GMR) materials by depositing representative alloy combinations upon radiation-hardened silicon-based integrated circuits. All of the stated goals of the project were achieved successfully. The necessary films were successfully deposited upon typical integrated circuits; the materials retained their magnetic field response at the highest radiation doses; and a patterning approach was developed that did not degrade the as-fabricated properties of the underlying circuitry. These results establish the feasibility of building radiation-hard magnetic memory cells.