In 1999 an integrated biological control system was instituted at the U.S. Department of Energy's Hanford Site. Successes and changes to the program needed to be communicated to a large and diverse mix of organizations and individuals. Efforts at communication are directed toward the following: Hanford Contractors (Liquid or Tank Waste, Solid Waste, Environmental Restoration, Science and Technology, Site Infrastructure), General Hanford Employees, and Hanford Advisory Board (Native American Tribes, Environmental Groups, Local Citizens, Washington State and Oregon State regulatory agencies). Communication was done through direct interface meetings, individual communication, where appropriate, and broadly sharing program reports. The objectives of the communication efforts was to have the program well coordinated with Hanford contractors, and to have the program understood well enough that all stakeholders would have confidence in the work performed by the program to reduce or elimated spread of radioactive contamination by biotic vectors. Communication of successes and changes to an integrated biological control system instituted in 1999 at the Department of Energy's Hanford Site have required regular interfaces with not only a diverse group of Hanford contractors (i.e., those responsible for liquid or tank waste, solid wastes, environmental restoration, science and technology, and site infrastructure), and general Hanford …

This document serves as a notice of construction (NOC), pursuant to the requirements of Washington Administrative Code (WAC) 246-247- 060, and as a request for approval to construct pursuant to 40 Code of Federal Regulations (CFR) 61.96, for the use of a portable exhauster at the 244-AR Vault during transfers or movement of radioactive waste as part of pumping of secondary containment, tank stabilization/pumping, and other activities (i.e., transfer or pumping of radioactive waste using established procedures, entries for maintenance and inspections) within the 244-AR Vault.

The cathodic arc plasmas produced by cathode spots usuallyinclude macroparticles, which is undesirable for many applications. Acommon way of removing macroparticles is to use curved solenoid filterswhich guide the plasma from the source to the substrate. In this work, anarc source with relatively small cathode is used, limiting the possiblelocations of plasma production. The relative position of cathodic arcsource and macroparticle filtered was systematically varied and thefiltered plasma current was recorded. It was found that axis-symmetricplasma injection leads to maximum throughput only if an anode aperturewas used, which limited the plasma to near-axis flow by scraping offplasma at larger angles to the axis. When the anode aperture was removed,more plasma could enter the filter. In this case, maximum filtered ioncurrent was achieved when the plasma was injected off-axis, namely offsetin the direction where the filter is curved. Such behavior wasanticipated because the plasma column in the filter is known to beshifted by ExB and centrifugal drift as well as by non-axis-symmetriccomponents of the magnetic field in the filter entrance and exit plane.The data have implications for plasma transport variations caused bydifferent spot locations on cathodes that are not small compared to thefilter cross section.

This status report to the Nuclear Data Committee from LLL summarizes work in the areas of standards, nuclear data applications, nuclear data for safeguards, and nuclear data compilation. A few of these papers, though brief, do contain data. 9 figures, 2 tables. (RWR)

No abstract currently available for this document at the current time.

Several advection algorithms are presented within the remap framework for unstructured mesh ALE codes. The methods discussed include a generic advection scheme based on a finite volume approach, and three groups of algorithms for the treatment of material boundary interfaces. The interface capturing algorithms belong to the Volume of Fluid (VoF) class of methods to approximate material interfaces from the local fractional volume of fluid distribution in arbitrary unstructured polyhedral meshes appropriate for the Kull code. Also presented are several schemes for extending single material radiation diffusion solvers to account for multi-material interfaces.

Several classes of mesh motion algorithms are presented for the remap phase of unstructured mesh ALE codes. The methods range from local shape optimization procedures to more complex variational minimization methods applied to arbitrary unstructured polyhedral meshes necessary for the Kull code.

None

The last ten years have brought rapid growth in the development and use of three-dimensional (3D) seismic models of earth structure at crustal, regional and global scales. In order to explore the potential for 3D seismic models to contribute to important societal applications, Lawrence Livermore National Laboratory (LLNL) hosted a 'Workshop on Multi-Resolution 3D Earth Models to Predict Key Observables in Seismic Monitoring and Related Fields' on June 6 and 7, 2007 in Berkeley, California. The workshop brought together academic, government and industry leaders in the research programs developing 3D seismic models and methods for the nuclear explosion monitoring and seismic ground motion hazard communities. The workshop was designed to assess the current state of work in 3D seismology and to discuss a path forward for determining if and how 3D earth models and techniques can be used to achieve measurable increases in our capabilities for monitoring underground nuclear explosions and characterizing seismic ground motion hazards. This paper highlights some of the presentations, issues, and discussions at the workshop and proposes a path by which to begin quantifying the potential contribution of progressively refined 3D seismic models in critical applied arenas.

The special kinds of demands placed on ERDA weapons and reactors require them to have very reliable welds. Process control is critical in achieving this reliability. ERDA has a number of advanced process control projects underway with much of the emphasis being on electron beam welding. These include projects on voltage measurement, beam-current control, beam focusing, beam spot tracking, spike suppression, and computer control. A general discussion of process control in welding is followed by specific examples of some of the advanced joining process control projects in ERDA.

For atomic and molecular quantum Monte Carlo calculations, most of the computational effort is spent in the evaluation of the local energy. We describe a scheme for reducing the computational cost of the evaluation of the Slater determinants and correlation function for the correlated molecular orbital (CMO) ansatz. A sparse representation of the Slater determinants makes possible efficient evaluation of molecular orbitals. A modification to the scaled distance function facilitates a linear scaling implementation of the Schmidt-Moskowitz-Boys-Handy (SMBH) correlation function that preserves the efficient matrix multiplication structure of the SMBH function. For the evaluation of the local energy, these two methods lead to asymptotic linear scaling with respect to the molecule size.

A cold pump test, training, and mock-up facility needs to be acquired and installed to support Tank Waste Retrieval and Disposal (TWR&D). Such a facility would serve useful purposes for the TWR&D, and would also have the capability to provide similar services for other Hanford Site activities.

This document defines the functions and requirements (F&R) for a test facility to provide for pre-deployment, checkout, testing, and training for the underground storage tank retrieval equipment, systems, and crews that will be developed or deployed as part of Waste Feed Delivery. The F&R for a River Protection Project retrieval test facility, one that supports a production mode tank farm system, are identified.

This Energy Commission staff draft report presents preliminary levelized cost estimates for several generic central-station electricity generation technologies. California has traditionally adopted energy policies that balance the goals of supporting economic development, improving environmental quality and promoting resource diversity. In order to be effective, such policies must be based on comprehensive and timely gathering of information. With this goal in mind, the purpose of the report is to provide comparative levelized cost estimates for a set of renewable (e.g., solar) and nonrenewable (e.g., natural gas-fired) central-station electricity generation resources, based on each technology's operation and capital cost. Decision-makers and others can use this information to compare the generic cost to build specific technology. These costs are not site specific. If a developer builds a specific power plant at a specific location, the cost of siting that plant at that specific location must be considered. The Energy Commission staff also identifies the type of fuel used by each technology and a description of the manner in which the technology operates in the generation system. The target audiences of this report are both policy-makers and anyone wishing to understand some of the fundamental attributes that are generally considered when evaluating the cost …

The purpose of this LDRD was the study of parametric instabilities on a laser-produced plasma, addressing crucial issues affecting the coupling between the laser and the plasma. We have made very good progress during these three years, in advancing our understanding in many different fronts. Progress was made in both theoretical and experimental areas. The coupling of high-power laser light to a plasma through scattering instabilities is still one of the most complex processes in laser-plasma interaction physics. In spite of the relevance of these parametric processes to inertial confinement fusion (ICF) and all other situations where a high-power laser beam couples to a plasma, many aspects of the interaction remain unexplained, even after many years of intensive experimental and theoretical efforts. Important instabilities under study are stimulated Brillouin scattering (SBS), stimulated Raman scattering (SRS), and the Langmuir decay instability (LDI). The study of these instabilities is further complicated by the competition and interplay between them, and, in the case of ICF, by the presence of multiple overlapping interaction beams. Stimulated Brillouin scattering consists of the decay of the incident electromagnetic (EM) wave into a scattered EM wave and an ion acoustic wave (IAW). Similarly, SRS consists of the decay …

A status report of microinstability as it applies to 2XIIB and MX theory for mirror machines is presented. It is shown that quasilinear computations reproduce many of the parameters observed in the 2XIIB experiment. In regard to large mirror machines, there are presented detailed calculations of the linear theory of the drift cyclotron loss-cone mode, with inhomogeneous geometry and nonlinear diffusive effects. Further, the stability of a mirror machine to the Alfven ion-cyclotron instability is assessed, and the Baldwin- Callen diffusion is estimated for a spatially varying plasma. (auth)

A responsibility of the Laser Safety Officer (LSO) is to perform laser safety audits. The American National Standard Z136.1 Safe use of Lasers references this requirement in several sections: (1) Section 1.3.2 LSO Specific Responsibilities states under Hazard Evaluation, ''The LSO shall be responsible for hazards evaluation of laser work areas''; (2) Section 1.3.2.8, Safety Features Audits, ''The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation''; and (3) Appendix D, under Survey and Inspections, it states, ''the LSO will survey by inspection, as considered necessary, all areas where laser equipment is used''. Therefore, for facilities using Class 3B and or Class 4 lasers, audits for laser safety compliance are expected to be conducted. The composition, frequency and rigueur of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms. In many institutions, a sole Laser Safety Officer (LSO) or a number of Deputy LSO's perform these audits. For that matter, there are institutions that request users to perform a self-assessment audit. Many items on the common audit list and the associated findings are …

Basic laser safety training at Lawrence Livermore National Laboratory (LLNL) is provided through a multiple module web-based course. The web-based course presents a wide and detailed review of laser safety topics including: biological effects, laser protective eyewear, fiber optic laser use, control measures, and more. It opens with a re-enactment of a laser accident. While supportive of this web-based course and actively involved in its development, the NIF Directorate has developed a classroom presentation adjunct to the course for laser users working in NIF. This author considers the LLNL web-based laser safety course to be one of, if not the best, such course available. Still, experience has shown that a ''lessons learned program'' is a great re-enforcer of laser safety. What-is-more, the laser lessons learned class provides important ''face-to-face'' interactions and discussion. The object of the ''laser lessons learned course'' is not to repeat the web course but present laser related lessons learned to the staff. In this author's opinion, lessons learned is the strongest safety re-enforcement one can present to the laser user community. For example, it can show how a practice that might be common to laser users can lead to a dramatic injury and a programmatic long-term …

This report itemizes the irradiations performed by Testing and Irradiation Services for Battelle-Northwest. It lists the material being irradiated, awaiting disposition and material shipped during the report period.

We discuss the motivation, theory, and formulation of the ab initio No-Core Shell Model (NCSM). In this method the effective Hamiltonians are derived microscopically from realistic nucleon-nucleon (NN) and theoretical three-nucleon (NNN) potentials, as a function of the finite harmonic-oscillator (HO) basis space. We present converged results for the A = 3 and 4 nucleon systems, which are in agreement with results obtained by other exact methods, followed by results for p-shell nuclei. Binding energies, rms radii, excitation spectra, and electromagnetic properties are discussed.The favorable comparison with available data is a consequence of the underlying NN and NNN interactions rather than a phenomenological fit.

None

Experiments have been performed to explore conditions under which spall damage is recompressed with the ultimate goal of developing a predictive model. Spall is introduced through traditional gas gun techniques or with laser ablation. Recompression techniques producing a uniaxial stress state, such as a Hopkinson bar, do not create sufficient confinement to close the porosity. Higher stress triaxialities achieved through a gas gun or laser recompression can close the spall. Characterization of the recompressed samples by optical metallography and electron microscopy reveal a narrow, highly deformed process zone. At the higher pressures achieved in the gas gun, little evidence of spall remains other than differentially etched features in the optical micrographs. With the very high strain rates achieved with laser techniques there is jetting from voids and other signs of turbulent metal flow. Simulations of spall and recompression on micromechanical models containing a single void suggest that it might be possible to represent the recompression using models similar to those employed for void growth. Calculations using multiple, randomly distributed voids are needed to determine if such models will yield the proper behavior for more realistic microstructures.

None

Anastamosing, low gradient distributary channels produce {approx}30 gravity, paraffinic oils from the Middle Member of the lacustrine Eocene Green River Formation in the south-central portion of the Uinta Basin. This localized depocenter was situated along the fluctuating southern shoreline of Lake Uinta, where complex deposits of marginal-lacustrine to lower delta plain accumulations are especially characteristic. The Middle Member contains several fining-upward parasequences that can be recognized in outcrop, core, and downhole logs. Each parasequence is about 60 to 120 feet thick and consists of strata deposited during multiple lake level fluctuations that approach 30 to 35 feet in individual thickness. Such parasequences represent 300,000-year cycles based on limited absolute age dating. The subaerial to subaqueous channels commonly possess an erosional base and exhibit a fining upward character. Accordingly, bedding features commonly range from large-scale trough and planar cross bedding or lamination at the base, to a nonreservoir, climbing ripple assemblage near the uppermost reservoir boundary. The best reservoir quality occurs within the laminated to cross-stratified portions, and the climbing ripple phase usually possesses more deleterious micas and/or detrital clays. Diagenesis also exerts a major control on reservoir quality. Certain sandstones were cemented by an early, iron-poor calcite cement, which can …