Microstructure of a sample of Inconel X-750 damaged by ISCC (intergranular stress corrosion cracking) was examined after fatigue precracking in a high-temperature environment of deaerated water. Orientation imaging microscopy was used to reveal the microstructure adjacent to the crack path. General high-angle boundaries were found to be most susceptible to cracking. An ordering of the susceptibilities to ISCC damage was proposed; all boundaries have been classified into one of 12 categories. A model is proposed to predict the crack path for ISCC based on ex situ record of damage probabilities. The cracking is modeled as a Markov chain on a regular hexagonal array of grain boundaries representing the connectivity of the network.

The US and other leading nations are at the forefront of a global trend to implement both national and international enterprise networks via information highways. New or upgraded cabling infrastructures are essential to support these activities. Professionals in the telecommunications industry are keenly aware of the challenges presented by such cabling upgrades. Desktop connectivity must be established before quantum leaps in information flow, as suggested by new technologies and global concepts. Some businesses with campus-type facilities have undertaken this formidable challenge. Universities and other higher-level learning institutions, corporate research facilities, independent and government-funded laboratories, financial institutions, medical facilities, and unique suburban housing test sites have risen to this challenge. Sandia National Laboratories is one such organization. This report presents the lessons learned from this project and gives 13 specific recommendations for manufacturers, buyers, and installers.

A remote measurement system has been constructed for in situ gamma and beta isotopic characterization of highly radioactive nuclear material in hostile environments. A small collimated, planar CdZnTe detector is used for gamma-ray spectroscopy. Spectral resolution of 2% full width at half maximum at 662 kiloelectronvolts has been obtained remotely using rise time compensation and limited pulse shape discrimination, Isotopc measurement of high-energy beta emitters was accomplished with a ruggedized, deeply depleted, surface barrier silicon dictator. The primary function of the remote nuclear screening system is to provide fast qualitative and quantitative isotopic assessment of high-level radioactive material.

This report presents the work done on {open_quotes}Investigation of Syngas Interaction in Alcohol Synthesis Catalysts{close_quotes} during the last three months. In this report the results of the work done on the effect of CO adsorption on the magnetic character of cobalt in the Cu/Co/Cr catalysts is discussed.

Purpose of this document is to provide Westinghouse Government Owned Contractor Operated (GOCO) Facilities with information that can be used to implement or improve drill programs. Elements of this guide are highly recommended for use when implementing a new drill program or when assessing an existing program. Casualty drills focus on response to abnormal conditions presenting a hazard to personnel, environment, or equipment; they are distinct from Emergency Response Exercises in which the training emphasis is on site, field office, and emergency management team interaction. The DOE documents which require team training and conducting drills in nuclear facilities and should be used as guidance in non-nuclear facilities are: DOE 5480.19 (Chapter 1 of Attachment I) and DOE 5480.20 (Chapter 1, paragraphs 7 a. and d. of continuing training). Casualty drills should be an integral part of the qualification and training program at every DOE facility.

The major effort in this program is to develop cost-effective processes which satisfy efficiency, yield, and material usage criteria for mass production of amorphous silicon-based multijunction modules. New and improved processes were developed for the component cells and a more robust rear contact was developed for better long term stability.

As the length of a horizontal well is increased, its contact with the reservoir increases. But at the same time, the resistance to the flow in the well also increases which has a direct negative effect on the productivity of the well. The overall performance of horizontal wells depends on the balance of these two opposing factors. No reliable tools are currently available that account for both these factors in the evaluation of horizontal well performance. An analytical well-model is developed which can quantify the effects of pressure loss in the well on the overall well performance. A sensitivity study is conducted on the effect of various reservoir, fluid and well parameters on well performance.

This System Design Description provides: (1) statements of the Spent Nuclear Fuel Projects (SNFP) needs requiring sampling of fuel in the K East and K West Basins, (2) the sampling equipment functions and requirements, (3) a general work plan and the design logic being followed to develop the equipment, and (4) a summary description of the design for the sampling equipment. The report summarizes the integrated application of both the subject equipment and the canister sludge sampler in near-term characterization campaigns at K Basins.

This System Design Description provides: (1) statements of the Spent Nuclear Fuel Projects (SNFP) needs requiring sampling of canister sludge in the K East and K West Basins, (2) the sampling equipment system functions and requirements, (3) a general work plan and the design logic being followed to develop the equipment, and (4) a summary description of the design for the sampling equipment.

Revised Report for 60-Day Safety Screening Results, Rotary Samples Core 98 and Core 104, Safety Screening and Ferrocyanide Results.

This report summarizes information on the historical uses, current status, and sampling and analysis results of waste stored in single-shell underground tank 241-BY-108.

The angular dependences of the pp elastic scattering analyzing power, spin correlation, depolarization transfer were measured in the angular range from 60{degrees} to 97{degrees} CM at 14 energies between 1.96 and 2 .23 GeV. At fixed angles two maxima were observed in the analyzing Power energy dependence, both below and above 2.11 GeV. Furthermore a rapid decrease Of the spin correlation Parameter at 90{degrees} CM occurs around this energy. The observables allow determination of the absolute values of three nonvanishing pp amplitudes at 90{degrees}. The energy dependence of the spin-single amplitude shows a shoulder centered at 2.11 GeV, while the spin-triplet amplitudes are decreasing functions of energy snowing no evidence of structure. All experimental data are listed in tables and their energy dependences are shown in figures.

This waste analysis plan (WAP) has been prepared for the Low-Level Burial Grounds that are located in the 200 East and 200 West Areas of the Hanford Facility, Richland, Washington. This WAP documents the methods used to characterize and obtain and analyze representative samples of waste managed at this unit.

During the 1992--95 Tevatron collider Run 1, the Collider Detector at Fermilab (CDF) collected a data sample of {anti p}p collisions at a center of mass energy of 1.8 TeV with an integrated luminosity of > 100 pb{sup {minus}1}. This was split into two separate data-taking runs: Run 1A ({approximately} 20 pb{sup {minus}1}) and the present Run 1B (> 80 pb{sup {minus}1}). Data-taking is planned to continue into 1996 and a total sample of about 120 pb{sup {minus}1} is expected. This data sample, in combination with improvements to the data acquisition system, the muon coverage, and the installation of the CDF SVX silicon vertex detector, has allowed many new effects to be studied. This paper reports results on heavy quark (charm, bottom and top) physics, electroweak phenomena, quantum chromodynamics, and searches for new particles beyond the Standard Model.

Plutonium solutions stored at the Plutonium Finishing Plant must be treated to convert the plutonium to a safe, solid form for storage and to remove the americium so that radiation exposure can be reduced. Extraction chromatographic resins will be tested for separating plutonium from these solutions in the laboratory. Separation parameters will be developed during the testing for large scale processing of the solutions. Use of chromatographic resins will allow plutonium separation with minimum of chemical addition to the feed and without the need for plutonium valence adjustment. The separated plutonium will be calcined to plutonium oxide by direct solution calcination.

This new pulsed EPR method is providing data on H-atom reaction rates in water, which are important in radiation chemistry of aqueous solutions, eg, corrosion in reactor cooling systems, H2 production in high-level radioactive waste, and spread of radioactive iodine following the Chernobyl accident. This AECL-Argonne collaborative effort was undertaken to investigate fundamental aqueous H-atom chemistry for the purpose of developing predictive models of iodine transport that will be used by the nuclear power industry to enhance plant safety. Reactions of (H){sub aq} with many representative organic and inorganicmolecules have already been investigated. Radiolysis of aqueous solns with 3-MeV electrons produces H atoms in high yield; in the free induction decay method, a powerful 30 ns microwave pulse is applied immediately following pulse radiolysis, creating a phase coherence of the H-atom electron spins that is detected in the pulsed EPR spectrometer as a damped cosine free induction decay (FID). Natural decay time of the spin coherence is many microseconds, but if a reaction partner for the H atoms is introduced, the FID becomes shorter, revealing the H reaction rate. Results of H atom reaction with benzene, methanol, periodate and periodic acid are discussed briefly.

Transportation of large objects using traditional bridge crane can induce pendulum motion (swing) of the object. In environments such as factory the energy contained in the swinging mass can be large and therefore attempts to move the mass onto target while still swinging can cause considerable damage. Oscillations must be damped or allowed to decay before the next process can take place. Stopping the swing can be accomplished by moving the bridge in a manner to counteract the swing which sometimes can be done by skilled operator, or by waiting for the swing to damp sufficiently that the object can be moved to the target without risk of damage. One of the methods that can be utilized for oscillation suppression is input preshaping. The validity of this method depends on the exact knowledge of the system dynamics. This method can be modified to provide some degrees of robustness with respect to unknown dynamics but at the cost of the speed of transient response. This report describes investigations on the development of a controller to dampen the oscillations.

Wildland fire suppression personnel employed by the CDF do not currently have the equipment to protect themselves from the short-term acute affects of smoke from wildland fires. In addition, no regulations exist that specify appropriate respiratory protection and the current air-purifying respirator technology and carbon monoxide monitoring has not been adapted to fit wildland fire suppression requirements. This three-year limited study evaluated the ability of wildland fire fighters to perform their normal job function while wearing full-face air-purifying respirators. In the first two years of this study we designed, developed and field tested a prototype ``smart`` air-purifying respirator which incorporated a real-time carbon monoxide monitor into a commercial full-face respirator.` Data on carbon monoxide exposure while fighting wildland fires was collected. During the third year of this study we evaluated eight different commercially available full-face air-purifying respirators equipped with a variety of cartridges. Apparatus to aid the fire fighter in carrying the respirator and carbon monoxide personal monitor was designed and fabricated. A smoke exposure test method was developed and a laboratory study on the penetration of smoke through respirator cartridges was conducted.

Fullerenes (C{sub 60}, C{sub 70}) have been identified by laser time-of-flight and electron-ionization mass spectroscopy in rock samples (black tuff in the Onaping formation) from the crater. They were likely synthesized within the impact plume from carbon contained in the meteorite. The isotopic ratios suggest {sup 13}C enrichment. They are associated with sulfur which may have protected them. This is the largest known deposit of naturally occurring fullerenes.

The team of Arthur D. Little, Tufts University and Engelhard Corporation will be conducting Phase I of a four and a half year, two-phase effort to develop and scale-up an advanced byproduct recovery technology that is a direct, single-stage, catalytic process for converting sulfur dioxide to elemental sulfur. this catalytic process reduces SO{sub 2} over a fluorite-type oxide (such as ceria or zirconia). The catalytic activity can be significantly promoted by active transition metals, such as copper. More than 95% elemental sulfur yield, corresponding to almost complete sulfur dioxide conversion, was obtained over a Cu-Ce-O oxide catalyst as part of an ongoing DOE-sponsored University Coal Research Program. This type of mixed metal oxide catalyst has stable activity, high selectivity for sulfur production, and is resistant to water and carbon dioxide poisoning. Tests with CO and CH{sub 4} reducing gases indicates that the catalyst has the potential for flexibility with regard to the composition of the reducing gas, making it attractive for utility use. the performance of the catalyst is consistently good over a range of SO{sub 2} inlet concentration (0.1 to 10%) indicating its flexibility in treating SO{sub 2} tail gases as well as high concentration streams.

Observations were made of the behavior of masonry infills in structural frames during the Northridge earthquake, and an analytical technique was developed for analyzing infilled frame structures. Infills near the epicenter suffered significant damage, but in several cases contributed to the seismic resistance and life safety performance. Older infill buildings in downtown Los Angeles experienced intensity of shaking similar to that expected in central/eastern United States earthquakes. The infills experienced some cracking, but otherwise complemented the lateral resistance of the weak building frames. This suggests infill frame buildings in moderate seismic zones may provide at least life safety functions without the need for expensive retrofit. A developed analytical technique was used to analyze two buildings for which the observed behavior and records from the Northridge earthquake were available. The analytical technique was based on using a piecewise linear equivalent strut for the infill. Parameters for the strut were obtained by examining the results of a wide variety of experimental infill tests. The strut method is easy to incorporate in standard linear analyses, and converges quite rapidly. The strut method was applied to two structures that had records from the Northridge earthquake. Very favorable comparisons between the analytical method and observed …

The objective of this work is to develop a novel system for regenerable SO{sub 2} and NO{sub x} scrubbing of flue gas that focuses on (1) a novel method for regeneration of spent SO{sub 2} scrubbing liquor and (2) novel chemistry for reversible absorption of NO{sub x}. In addition, high efficiency hollow fiber contactors (HFC) are proposed as the devices for scrubbing the SO{sub 2} and NO{sub x} from the flue gas. The system will be designed to remove more than 95% of the SO{sub x} and more than 75% of the NO{sub x} from flue gases typical of pulverized coal-fired power plants at a cost that is at least 20% less than combined wet limestone scrubbing of SO{sub x} and selective catalytic reduction of NO{sub x}. In addition, the process will make only marketable byproducts, if any (no waste streams). Our approach is to reduce the capital cost by using high efficiency hollow fiber devices for absorbing and desorbing the SO{sub 2} and NO{sub x}. We will also introduce new process chemistry to minimize traditionally well-known problems with SO{sub 2} and NO{sub x} absorption and desorption. For example, we will extract the SO{sub 2} from the aqueous scrubbing liquor …

Environmental surveillance of the Hanford Site and surrounding areas is conducted by the Pacific Northwest National Laboratory (PNNL) for the US Department of Energy (DOE). This document contains the planned 1996 schedules for routine collection of samples for the Surface Environmental Surveillance Project (SESP), Drinking Water Project, and Ground-Water Surveillance Project.

With the advent of synchrotron radiation sources, the issue of beam lifetime becomes increasingly important. Users of these machines need to perform experiments which seldom last 15 minutes, but require hours for their completion. Therefore, the beam should circulate stably for hours. The beam of the Advanced Photon Source (APS) storage ring at Argonne National Laboratory is assumed to circulate stably for a minimum of 10 hours. The main contributions to the total beam lifetime (which is the inverse of the loss rate) come from residual gas scattering and Touschek scattering. The residual gas scattering is comprised of single Coulomb scattering and bremsstrahlung. The single-Coulomb scattering involves elastic collisions, while bremsstrahlung involves inelastic collisions, between the bunch and the surrounding residual gas. In the calculation the authors take the gas to be nitrogen at a pressure of 1 nTorr. Touschek scattering involves scattering of particles within the bunch, transferring energy among themselves. Such an energy transfer, if large enough, may eject the particle out of the bunch, thus causing it to be lost. Let us not forget the residual-gas lifetime. As pointed out, the calculation of this lifetime is done for the very low pressure of 1 nTorr. If the …