Electron cooling was proposed to increase luminosity of the RHIC collider for heavy ion beams at low energies. Luminosity decreases as the square of bunch intensity due to the beam loss from the RF bucket as a result of the longitudinal intra beam scattering (IBS), as well as due to the transverse emittance growth because of the transverse IBS. Both transverse and longitudinal IBS can be counteracted with electron cooling. This would allow one to keep the initial peak luminosity close to constant throughout the store essentially without the beam loss. In addition, the phase-space density of the hadron beams can be further increased by providing stronger electron cooling. Unfortunately, the defining limitation for low energies in RHIC is expected to be the space charge. Here we explore an idea of additional improvement in luminosity, on top of the one coming from just IBS compensation and longer stores, which may be expected if one can operate with longer bunches at the space-charge limit in a collider. This approach together with electron cooling may result in about 10-fold improvement in total luminosity for low-energy RHIC program.

None

This project seeks to develop a technique, based on coal surface properties, for highly dispersing catalysts in coal for gasification and to investigate the potential of using potassium carbonate and calcium acetate mixtures as catalysts for coal gasification. The lower cost and higher catalytic activity of the latter compound will produce economic benefits by reducing the amount of K{sub 2}CO{sub 3} required for high coal char reactivities. As was shown in previous reports, coal loading with potassium or calcium at different pHs produced CO{sub 2} gasification activities which increased in the order pH 6 > pH 10 {much_gt} pH 1. The current report shows that a similar trend was obtained when calcium and potassium were simultaneously loaded and char reaction times were less than about 75 min. Beyond this time, the coal impregnated with catalyst at pH 1 became more reactive, reaching 100% conversion after 1.5h. X-ray diffraction analysis suggest that the catalysts are well dispersed around pH 1 and 6 whereas reduced dispersion as obtained at pH 10. The reactivities are independent of the surface areas of the coals.

This project seeks to develop a technique, based on coal surface properties, for highly dispersing catalysts in coal for gasification and to investigate the potential of using potassium carbonate and calcium acetate mixtures as catalysts for coal gasification. The lower cost and higher catalytic activity of the latter compound will produce economic benefits by reducing the amount of K{sub 2}CO{sub 3} required for high coal char reactivities. As was shown in previous reports, coal loading with potassium or calcium at different pHs produced CO{sub 2} gasification activities which increased in the order pH 6 > pH 10 {much gt} pH 1. The current report shows that a similar trend was obtained when calcium and potassium were simultaneously loaded and char reaction times were less than about 75 min. Beyond this time, the coal impregnated with catalyst at pH 1 became more reactive, reaching 100% conversion after 1.5h. X-ray diffraction analysis suggest that the catalysts are well dispersed around pH 1 and 6 whereas reduced dispersion as obtained at pH 10. The reactivities are independent of the surface areas of the coals.

Double-shell ignition is complementary to the baseline approach by virtue of not requiring: (1) cryogenic preparation and fielding, (2) high-contrast pulse-shaping for shock-timing, and (3) demanding x-ray flux symmetry control. The use of simpler low-contrast pulse-shaping potentially allows more benign hohlraum conditions by reducing the risk of laser backscatter. In addition, the associated higher laser fluence threshold for optics damage initiation allows the possibility of more routine high-fluence shots with 2{omega} on the NIF. Based on LDRD-sponsored research in FY01-03 on NIF double-shell ignition target designs, the feasibility of this approach was advanced through both a highly successful implosion campaign on the Omega laser facility and a variety of design improvements for mitigating instability. The double-shell implosion campaign on Omega achieved the important milestone of repeatably demonstrating dominant primary (2.45 MeV) neutron production from the mix-susceptible compressional phase of a double-shell implosion, using fall-line design optimization and exacting fabrication standards. Showing effective control of fuel-pusher mix during final compression is an essential element for achieving ignition. In our studies to control mix by reducing hydrodynamic instability a new pathway for destructive Rayleigh-Taylor growth on the outer surface of the inner shell at ignition scales was identified. However, highly resolved multi-mode …

The annotated bibliography is divided into sections on chemistry and geochemistry, migration and accumulation, cultural distributions, natural distributions, and bibliographies and annual reviews. (LK)

Yucca Flat is a topographic and structural basin in the northeastern part of the Nevada Test Site (NTS) in Nye County, Nevada. Between the years 1951 and 1992, 659 underground nuclear tests took place in Yucca Flat; most were conducted in large, vertical excavations that penetrated alluvium and the underlying Cenozoic volcanic rocks. Radioactive and other potential chemical contaminants at the NTS are the subject of a long-term program of investigation and remediation by the U.S. Department of Energy (DOE), National Nuclear Security Administration, Nevada Site Office, under its Environmental Restoration Program. As part of the program, the DOE seeks to assess the extent of contamination and to evaluate the potential risks to humans and the environment from byproducts of weapons testing. To accomplish this objective, the DOE Environmental Restoration Program is constructing and calibrating a ground-water flow model to predict hydrologic flow in Yucca Flat as part of an effort to quantify the subsurface hydrology of the Nevada Test Site. A necessary part of calibrating and evaluating a model of the flow system is an understanding of the location and characteristics of faults that may influence ground-water flow. In addition, knowledge of fault-zone architecture and physical properties is a …

As a subproject of the HANDI 2000 project, the Finance and Supply Management system is intended to serve FDH and Project Hanford major subcontractor with financial processes including general ledger, project costing, budgeting, and accounts payable, and supply management process including purchasing, inventory and contracts management. Currently these functions are performed with numerous legacy information systems and suboptimized processes.

The Software Configuration Management Plan (SCMP) describes the configuration management and control environment for HANDI 2000 for the PP and PS software, as well as any custom developed software. This plan establishes requirements and processes for uniform documentation and coordination of HANDI 2000. This SCMP becomes effective as of this document's acceptance and will provide guidance through implementation efforts.

We designed and fabricated mixing devices that will help us elucidate the mechanisms of protein folding through measurements of folding reaction rates. These devices can be used in studying of other biological systems and are compatible with various spectroscopic observation methods. The project involved development of fabrication processes and setup of a laboratory for assembly and characterization of microfluidic devices, as well as measurements of protein folding kinetics. We produced three variants of the mixer: (1) The ultra fast mixer for Foerster Resonance Energy Transfer measurements (described by Anal. Chem. Article UCRL-JRNL-206676) and MicroTAS Conference Proceedings article (UCRL-JC-153057 ) included in the report; (2) The ultra fast mixer for UV measurements (described by the poster presented at MicroTAS conference (UCRL-POST-207476) included in the report); and (3) The mixer for single molecule measurements (described by the Science article UCRL-JC-153057) included in the report. In these mixers, the channels are narrow, ranging from a few to hundreds of {micro}m, so that the flow is laminar and all of the mixing is achieved through diffusion. Our goal is to develop robust microfluidic mixer with at least 100 times lower consumption rate, shorter dead time and time resolution than commercially available mixers that would …

None

As a market segment for solar photovoltaic (PV) adoption, new homes have a number of attractive attributes. Homebuyers can easily roll the cost of the PV system into their tax-deductible home mortgage and, with rebates and other financial incentives, potentially achieve an immediate net-positive cash flow from the investment. New homes are amenable to building-integrated photovoltaics (BIPV), which are less susceptible to aesthetic concerns than traditional, rack-mounted systems. The performance of PV systems can be optimized on new homes by taking roof orientation and shading into account when designing the home. Perhaps most importantly, subdivisions with PV systems installed on a large number of homes offer potential cost savings from volume purchases of modules and inverters and from scale economies in system design and installation. Finally, the ability of builders to install PV as a standard feature on multiple homes in new subdivisions offers an opportunity to circumvent the high transaction costs and information-related market barriers typically confronted when each individual homeowner must make a decision about installing PV. Builders may benefit in several ways from incorporating PV into new homes. Builders may gain greater market differentiation, enhanced media exposure, and less community or political opposition to development projects. Additionally, …

None

The purpose of this Phased Construction Completion Report (PCCR) is to present fiscal year (FY) 2009 results of Dynamic Verification Strategy (DVS) characterization activities for exposure unit (EU) Z2-36 in Zone 2 at the East Tennessee technology Park (ETTP). The ETTP is located in the northwest corner of the US Department of Energy (DOE) Oak Ridge Reservation in Oak Ridge, Tennessee and encompasses approximately 5000 acres that have been subdivided into three zones--Zone 1 ({approx} 1400 acres), Zone 2 ({approx} 800 acres), and the Boundary Area ({approx} 2800 acres). Zone 2 comprises the highly industrial portion of ETTP and consists of all formerly secured areas of the facility, including the large processing buildings and direct support facilities; experimental laboratories and chemical and materials handling facilities; materials storage and waste disposal facilities; secure document records libraries; and shipping and receiving warehouses. The Record of Decision for Soil, Buried Waste, and Subsurface Structure Actions in Zone 2, East Tennessee Technology Park, Oak Ridge, Tennessee (DOE 2005) (Zone 2 ROD) specifies the future end use for Zone 2 acreage as uncontrolled industrial for the upper 10 ft of soils. Characterization activities in these areas were conducted in compliance with the Zone 2 ROD …

This report forms part of the Conceptual Design Report (CDR) of the Compact LInear Collider (CLIC). The CLIC accelerator complex is described in a separate CDR volume. A third document, to appear later, will assess strategic scenarios for building and operating CLIC in successive center-of-mass energy stages. It is anticipated that CLIC will commence with operation at a few hundred GeV, giving access to precision standard-model physics like Higgs and top-quark physics. Then, depending on the physics landscape, CLIC operation would be staged in a few steps ultimately reaching the maximum 3 TeV center-of-mass energy. Such a scenario would maximize the physics potential of CLIC providing new physics discovery potential over a wide range of energies and the ability to make precision measurements of possible new states previously discovered at the Large Hadron Collider (LHC). The main purpose of this document is to address the physics potential of a future multi-TeV e{sup +}e{sup -} collider based on CLIC technology and to describe the essential features of a detector that are required to deliver the full physics potential of this machine. The experimental conditions at CLIC are significantly more challenging than those at previous electron-positron colliders due to the much higher …

Adoption of hydrogen (H{sub 2}) vehicles has been advocated for decades as an ecological ideal, capable of eliminating petroleum consumption as well as tail-pipe air pollution and carbon dioxide (CO{sub 2}) from automobiles. Storing sufficient hydrogen fuel onboard still remains a great technological challenge, despite recent advances in lightweight automotive materials, hybrid-electric drivetrains and fuel cells enabling 60-100 mpg equivalent H{sub 2}-fueled automobiles. Future onboard hydrogen storage choices will be pivotal, with lasting strategic consequences for the eventual scale, shape, security, investment requirements, and energy intensity of the H{sub 2} refueling infrastructure, in addition to impacts on automotive design, cost, range, performance, and safety. Multiple hydrogen storage approaches have been examined and deployed onboard prototype automobiles since the 1970's. These include storing H{sub 2} as a cryogenic liquid (LH{sub 2}) at temperatures of 20-25 Kelvin, compressing room temperature H{sub 2} gas to pressures as high as 10,000 psi, and reversible chemical absorption storage within powdered metal hydrides (e.g. LaNi{sub 5}H{sub 6}, TiFeH{sub 2}, MgH{sub 2}, NaAlH{sub 4}) which evolve H{sub 2} when warmed. Each of these approaches face well-known fundamental physical limits (thermal endurance, volume, and weight, respectively). This report details preliminary experiments investigating the potential of a new approach …

None

This plan describes all the possible permitting actions that could be required to implement the Hanford Tanks Initiative Project (HTI). Since the HTI Project Plan has several decision points where possible future activities could be eliminated, not all permitting actions described will be implemented. The cost and schedule for the permitting actions are included.

The authors have started the development of COPS, a collection of large-scale nonlinearly Constrained Optimization Problems. The primary purpose of this collection is to provide difficult test cases for optimization software. Problems in the current version of the collection come from fluid dynamics, population dynamics, optimal design, and optimal control. For each problem they provide a short description of the problem, notes on the formulation of the problem, and results of computational experiments with general optimization solvers. They currently have results for DONLP2, LANCELOT, MINOS, SNOPT, and LOQO.

This report gives the status of production test control tube loadings in reactor process tubes containing significant amounts of SS materials. Data are given in table form. For further description of column headings and the current discharge goal exposure plan refer to Document RL-REA-837.

This Project Management Plan combines the project management deliverables from the P+ methodology which are applicable to Release 1 of the QUEST2 work. This consolidation reflects discussions with WHC QA regarding an appropriate method for ensuring that P+ deliverables fulfill the intent of WHC-CM-3-10 and QR-19.

The overall objective of this project was to improve the effectiveness of a microbial selective plugging technique of improving oil recovery through the use of polymer floods. More specifically, the intent was to increase the total amount of oil recovered and to reduce the cost per barrel of incremental oil.

The overall objective of this project was to improve the effectiveness of a microbial selective plugging technique of improving oil recovery through the use of polymer floods. More specifically, the intent was to increase the total amount of oil recovered and to reduce the cost per barrel of incremental oil.

The objective of this project was to determine if the effectiveness of a microbial permeability profile modification technique can be improved through polymer flooding.