A technical evaluation was made to determine whether geothermal energy obtained from a well could be used to space heat the new school building being constructed as well as the existing elementary wing of the Pittsville School. The first part deals with space heating the new school building only; the second part pertains to space heating the new school building together with the new existing wing. An addendum was added for new well and production pump costs. (MHR)

In this research project we have tightly integrate the use of level of detail with PC cluster-based rendering systems.

As asked by the U. S. Department of Energy/Office of Special Applications, and in support of the Environmental Impact Statement for the Cassini mission, The Johns Hopkins University/Applied Physics Laboratory (JHU/APL) has conducted preliminary one-dimensional ablation and thermal analyses of the General Purpose Heat Source (GPHS). The predicted earth entry conditions provided by the Jet Propulsion Laboratory (JPL) for a Cassini Venus-Venus-Earth-Jupiter Gravity Assist (VVEJGA) trajectory were used as initial conditions. The results of this study which constitute the initial reentry analysis assessment leading to the Cassini Updated Safety, Analysis Report (USAR) are discussed in this document.

None

None

The feasibility of geothermal energy use at naval installations in Norfolk, VA, Jacksonville, FL, and Charleston, SC was assessed. Geophysical and geological studies of the above areas were performed. Engineering and economic factors, affecting potential energy use, were evaluated. The Norfolk and Jacksonville facilities are identified as candidates for geothermal systems. System costs are predicted. Economic benefits of the proposed geothermal systems are forecast, using the net present value method of predicting future income.

An assessment is provided of selected environmental effects of operating the cooling towers and stacks of Units No. 3 and No. 4 of the Potomac Electric Power Company's generating station at Chalk Point, Maryland. The emphasis is on the magnitude of salt deposition to the area surrounding the cooling tower due to saline water drift. A secondary but important consideration is the magnitude of salt loading due to saline drift from the stack which uses saline river water in scrubbing flue gases. This salt loading together with that of the ambient salt background is assessed for its effects on soils, crops, native vegetation and man-made structures. Other atmospheric effects examined are: enhancement of ground level fogging and icing, enhancement of precipitation, and the flight hazards to aircraft. A numerical model of drift deposition has been developed and validated against the data collected in the Dyed Drift Experiment at Chalk Point. Use of the available data model predictions indicate that with fulltime, full load operation of both 600 MW(e) units significant levels of salt deposition occur only on the plant site within 0.4 km of the source. The predicted maximum salt deposition rates are given. The effects on soils, crops and …

The Johns Hopkins University Applied Physics Laboratory, under contracts with several agencies of the federal government and an agency of the State of Maryland, is engaged in developing energy resources, utilization concepts, and monitoring and storage methods. This Quarterly Report summarizes the work on the various tasks as of 31 March 1980. The Energy Quarterly Report is divided into four sections. The first, Geothermal Energy Development Planning and Technical Assistance, supported by the Department of Energy/Division of Geothermal Energy (DOE/DGE), contains reports on the progress of geothermal-related tasks on which effort was concentrated during the quarter. The second section, Operational Research, Hydroelectric Power Development, supported by the Department of Energy/Resource Applications (DOE/DGE), contains reports on small-scale hydroelectric investigations in the southeastern states. The third section, Seismotectonic Investigation, supported by the Reactor Safety Research Division of the Nuclear Regulatory Commission, reports on a neotectonic investigation in Connecticut. The fourth section, Energy Conversion and Storage Techniques, contains two articles, the first on OTEC core unit testing supported by the Department of Energy/Division of Central Solar Technology (DOE/CST), and the second on an analysis of the Community Annual Storage Energy System at the U.S. Naval Air Station, Norfolk, Va. This work is supported …

This report summarizes the research of the Principal Investigator, his postdoctoral research associates, and his students during the period of the award. The majority of the work concerns the behavior of hadrons containing strange, charm, bottom and top quarks, with a particular focus on the extraction of Cabibbo--Kobayashi--Maskawa matrix elements from experiments performed on such systems.

From American Chemical Society 145th National Meeting, New York, Sept. 1963. The pyrolysis of diborane was examined using a chemical shock tube as a reactor. Additional evidence for the existence of hexaborane-12 and heptaborane- 11 and -13 was obtained. The presence of a large net normal isotope effect in the formation of tetraborane and hexaborane and a net inverse isotope effect in the formation of pentaborane-9 are observed. A mechanism, consisting of a series of competitive reactions and eqailibria, in which tetraboraue is the precursor of pentaborane-11 and hexaborane but not of pentaborane-9 is shown to be compatible with the observed isotope effect. Data obtained by examining the pyrolysis of various mixtures of boron hydrides are also consistent with the mechanism. (auth)

A careful study of a specially formed thin silicon layer on TiB/sub 2/-coated sapphire reveals that the interaction layer of TiSi/sub 2/ is composed of larger grains. Processing steps were developed which lead closer to the goal of fabricating polycrystalline silicon photovoltaic devices completely by vacuum deposition. Both n-type and p-type silicon are now being deposited. New deposition masks were made for depositing the n-regions upon the p-layers. New electrode deposition masks were also made for a direct electroding process to replace the photolithographic process used previously. The TiB/sub 2/ bottom electrode fabrication has been achieved in a single vacuum chamber. Reaction constants and activation energy for TiB/sub 2/ layer formation were determined to be less than those reported by other authors for bulk material. Studies of crystallite growth and interfacial interactions have continued. Major sources of undesirable impurities have been identified and removed from the vacuum chambers. The changes made this quarter have not been incorporated into a completed photovoltaic device.

Polycrystalline silicon films 14-22 ..mu..m thick and with average grain diameters of 20-40 ..mu..m were deposited by vacuum deposition onto both ceramic and sapphire substrates which were previously coated with a thin (1-2 ..mu..m) TiB/sub 2/ conducting layer. The large grains are the result of an interaction in the initial growth stages between silicon and TiB/sub 2/. SIMS studies of B/Ti/Al/sub 2/O/sub 3/, B/Al/sub 2/O/sub 3/, and Ti/Al/sub 2/O/sub 3/, interactions are reported as part of a continuing investigation of TiB/sub 2/ formation and silicon interactions on the TiB/sub 2/ surface. The increase in grain size has led to an improvement in the open-circuit voltage V/sub oc/, but not to an increase in the short-circuit current J/sub sc/. Capacitance-voltage measurements give results characteristic of an abrupt junction and a build-in voltage V/sub D/ consistent with the measured doping levels. A simple method for measuring the minority carrier diffusion length in the base region L/sub n/ is described. The measurements indicate that there is little change in L/sub n/ between large (20-40 ..mu..m) and small (approx. 5 ..mu..m) grained samples.

Polycrystalline p-type films were vacuum deposited onto TiB/sub 2/ coated alumina and sapphire substrates. Epitaxial layers were also formed on single crystal silicon substrates. Junctions in the layers were created by both gaseous diffusion in a tube furnace and by vacuum deposition. The TiB/sub 2/ vacuum deposited bottom electrodes have resistivities between 30 and 40 ..mu.. ..cap omega..-cm. All-vacuum-deposited solar cells were fabricated for the first time. Efficiencies approaching those in the diffused junction devices were achieved. The n-layers were deposited on the previously deposited p-layer/TiB/sub 2//ceramic sandwiches by vacuum deposition of silicon in a phosphine (PH/sub 3/) atmosphere. Photovoltaic data in diffused junction samples, including efficiency and spectral response measurements, indicate that crystallite size may no longer be the limiting factor in achieving high efficiency; rather, performance is now being limited by the presence of impurities in the vacuum deposition silicon base region.

The present report resumes the research activities of the Plasma Spectroscopy/Diagnostics Group at Johns Hopkins University performed on the NSTX tokamak at PPPL during the period 1999-2009. During this period we have designed and implemented XUV based diagnostics for a large number of tasks: study of impurity content and particle transport, MHD activity, time-resolved electron temperature measeurements, ELM research, etc. Both line emission and continuum were used in the XUV range. New technics and novel methods have been devised within the framework of the present research. Graduate and post-graduate students have been involved at all times in addition to the senior research personnel. Several tens of papers have been published and lectures have been given based on the obtained results at conferences and various research institutions (lists of these activities were attached both in each proposal and in the annual reports submitted to our supervisors at OFES).

It is suggested that the most practical early application of the Madison waters is in community space heating with the local hot waters considered as a municipal commodity. The general design of such a community system is discussed along with its cost, means of financing, and life expectancy. Legal questions and state statutes that are pertinent are cited and the life expectancy of the entire Madison resource and equipment to expoit the resource are considered. (MHR)

The Johns Hopkins University/Applied Physics Laboratory, JHU/API, in support of Lawrence Livermore National Laboratory, LLNL, is conducting aerodynamic, trajectory, and structural analysis of the Advanced Single Stage Technology Rapid Insertion Demonstration (ASTRID) vehicle, being launched out of Vandenberg Air Force Base (VAFB) in February 1994. The launch is designated ASTRID-1 and is the first in a series of three that will be launched out of VAFB. Launch dates for the next two flights have not been identified, but they are scheduled for the 1994-1995 time frame. The primary goal of the ASTRID-1 flight is to test the LLNL light weight thrust on demand bi-propellant pumped divert propulsion system. The system is employed as the main thrusters for the ASTRID-1 vehicle and uses hydrazine as the mono-propellant. The major conclusions are: (1) The vehicle is very stable throughout flight (stability margin = 17 to 24 inches); (2) The aerodynamic frequency and the roll rate are such that pitch-roll interactions will be small; (3) The high stability margin combined with the high launcher elevation angle makes the vehicle flight path highly sensitive to perturbations during the initial phase of flight, i.e., during the first second of flight after leaving the rail; (4) …

Reentry analyses consisting of ablation response, thermal response and thermal stress response have been conducted on the Light Weight Radioisotope Heater Unit for Galileo/VEEGA reentry conditions. Sequential ablation analyses of the LWRHU aeroshell, the fuel clad, and the fuel pellet have been conducted in reentry regimes where the aeroshell has been deemed to fail. The failure criterion for ablation is assumed to be recession corresponding to 50% of the wall thickness (the design criterion recommended in the DOE Overall Safety Manual). Although the analyses have been carried far beyond this limit (as presented and discussed herein), JHU/APL endorses the position that failure may occur at the time that this recession is achieved or at lower altitudes within the heat pulse considering the uncertainties in the aerodynamic, thermodynamic, and thermo-structural analyses and modeling. These uncertainties result mainly because of the high energies involved in the VEEGA reentries compared to orbital decay reentries. Risk evaluations should consider the fact that for shallow flight paths the unit may disassemble at high-altitude as a result of ablation or may remain intact until it impacts with a clad that had been molten. 80 refs., 46 figs., 16 tabs.

A survey was made on methcds and related costs of disposing of radioactive wastes as practiced in 1955 by twelve atomic industry installations. Wherever possible, estimated unit costs of differentiated stages of waste handling are shown- these are integrated to show the over-all scope of waste dispesal practices at each site. Tabular data summarize costs and operation magnitades at the installations. A pattern is established for standardizing the reporting of fixed costs and equipment unsage costs. The economy of solid waste volume reduction is analyzed. Material costs are listed. An outline for recording monthly waste disposal costs is presented. Obvious conclusions drawn from the factual data are: that it is more expensive per cubic foot to handle high-level wastes than low-level wastes. and that land disposal is less expenaive than sea disposal. A reexamination of baling economics shows that high compression of solid wastes is more expensive than simpler forms of compaction. (auth)

The Geothermal Resources Interactive Temporal Simulation (GRITS) model is a computer code designed to estimate the costs of geothermal energy systems. The interactive program allows the user to vary resource, demand, and financial parameters to observe their effects on delivered costs of direct-use geothermal energy. Due to the large number and interdependent nature of the variables that influence these costs, the variables can be handled practically only through computer modeling. This report documents a sensitivity analysis of the cost of direct-use geothermal energy where each major element is varied to measure the responsiveness of cost to changes in that element. It is hoped that this analysis will assist those persons interested in geothermal energy to understand the most significant cost element as well as those individuals interested in using the GRITS program in the future.

The processes involved in the formation of mixed oxides powders were studied using the counterflow diffusion flame burner. Powders of different morphologies were obtained by varying the flame conditions (temperature, residence time) and the concentration ratio of the oxides precursors. In-situ particle size and number density were determined using dynamic light scattering and 90{degrees} light scattering. A thermophoretic sampling method and a larger scale powder collection device also was used to collect particles, and their size and morphology examined using transmission electron microscopy, X-ray diffraction and surface area measurement by gas absorption (BET). Our emphasis has been on TiO{sub 2}-SiO{sub 2}, SiO{sub 2}-GeO{sub 2} and Al{sub 2}O{sub 3}-TiO{sub 2}. The powders had a core-mantle-like (one oxide coated by the other) at low elevations in the burner and uniform mixture at higher elevations. They form chain-like structures in a low temperature flame and spherical particles in a higher temperature flame. Nanometer sized homogeneous particles of Aluminum Titanate could be obtained using Al(CH{sub 3}){sub 3} and TiCl{sub 4} as precursors both in a hydrogen fueled and a methane fueled counterflow diffusion flame burner, as well as in a hydrogen fueled parallel-flow diffusion flame burner.

A new technique for removal of elemental mercury from emissions of coal-fired utilities was investigated. The key idea is to selectively photo ionize the mercury atoms. A strong electric field gradient then drags them to the negative plate where they can be collected and removed.

This research grant supported the creation and initial development of a new kind of chemical detector; one that can detect species at part per trillion levels because it does not rely on the direct measurement of a species presence; rather, it uses an indirect measurement of the effect of the trace species on the condensation nucleation of a supersaturated vapor. Since this nucleation process is extremely sensitive to the concentrations of certain types of impurities, this nucleation-based detection can be made more sensitive than any current spectroscopic detector.

Nineteen papers presented at the Conference on the Transport of Radionuclides in Fresh Water Systems are given. Separate abstracts were prepared for 18 papers; one was previously abstracted for NSA. (M.C.G.)

This report deals with the development of methods and techniques for measuring the amounts of radioisotope on the stack wall, in ash, stack gas and atmosphere during and after incineration in the conventional refuse-type destructor.