This quarterly report includes summaries of the following tasks: (1) OTEC pilot plant conceptual design review; (2) OTEC methanol; (3) management decision requirements for OTEC construction; (4) hybrid geothermal - OTEC (GEOTEC) power plant performance estimates; and (5) supervision of testing of pneumatic wave energy conversion system.

Research progress is reported on developing Ocean Thermal Energy Conversion (OTEC) systems that will provide synthetic fuels (e.g., methanol), energy-intensive products such as ammonia (for fertilizers and chemicals), and aluminum. The work also includes assessment and design concepts for hybrid plants, such as geothermal-OTEC (GEOTEC) plants. Another effort that began in the spring of 1982 is a technical advisory role to DOE with respect to their management of the conceptual design activity of the two industry teams that are designing offshore OTEC pilot plants that could deliver power to Oahu, Hawaii. In addition, a program is underway in which tests of a different kind of ocean-energy device, a turbine that is air-driven as a result of wave action in a chamber, are being planned. This Quarterly Report summarizes the work on the various tasks as of 31 December 1982.

Polycrystalline silicon films 14-22 ..mu..m thick and with average grain diameters of 20-40 ..mu..m were deposited by vacuum deposition onto both ceramic and sapphire substrates which were previously coated with a thin (1-2 ..mu..m) TiB/sub 2/ conducting layer. The large grains are the result of an interaction in the initial growth stages between silicon and TiB/sub 2/. SIMS studies of B/Ti/Al/sub 2/O/sub 3/, B/Al/sub 2/O/sub 3/, and Ti/Al/sub 2/O/sub 3/, interactions are reported as part of a continuing investigation of TiB/sub 2/ formation and silicon interactions on the TiB/sub 2/ surface. The increase in grain size has led to an improvement in the open-circuit voltage V/sub oc/, but not to an increase in the short-circuit current J/sub sc/. Capacitance-voltage measurements give results characteristic of an abrupt junction and a build-in voltage V/sub D/ consistent with the measured doping levels. A simple method for measuring the minority carrier diffusion length in the base region L/sub n/ is described. The measurements indicate that there is little change in L/sub n/ between large (20-40 ..mu..m) and small (approx. 5 ..mu..m) grained samples.

This quarterly report summarizes work of the following tasks as of March 31, 1982: OTEC pilot plant conceptual design review; OTEC methanol; review of electrolyzer development programs and requirements; financial and legal considerations in OTEC implementation; potential Navy sites for GEOTEC systems; hybrid geothermal-OTEC power plants: single-cycle performance estimates; and supervision of testing of pneumatic wave energy conversion system.

The Applied Physics Laboratory/Department of Energy Low Cost Flywheel Demonstration Program was initiated on 1 October 1977 and was successfully concluded on 31 December 19'9. The total cost of this program was $355,190. All primary objectives were successfully achieved as follows: demonstration of a full-size, 1)kWh flywheel having an estimated cost in large-volume production of approximately $50/kWh; developmeNt of a ball-bearing system having losses comparable to the losses in a totally magnetic suspension system; successful and repeated demonstration of the low-cost flywheel in a complete flywheel energy-storage system based on the use of ordinary house voltage and frequency; and application of the experience gained in the hardware program to project the system design into a complete, full-scale, 30-kWh home-type flywheel energy-storage system.

A careful study of a specially formed thin silicon layer on TiB/sub 2/-coated sapphire reveals that the interaction layer of TiSi/sub 2/ is composed of larger grains. Processing steps were developed which lead closer to the goal of fabricating polycrystalline silicon photovoltaic devices completely by vacuum deposition. Both n-type and p-type silicon are now being deposited. New deposition masks were made for depositing the n-regions upon the p-layers. New electrode deposition masks were also made for a direct electroding process to replace the photolithographic process used previously. The TiB/sub 2/ bottom electrode fabrication has been achieved in a single vacuum chamber. Reaction constants and activation energy for TiB/sub 2/ layer formation were determined to be less than those reported by other authors for bulk material. Studies of crystallite growth and interfacial interactions have continued. Major sources of undesirable impurities have been identified and removed from the vacuum chambers. The changes made this quarter have not been incorporated into a completed photovoltaic device.

Polycrystalline p-type films were vacuum deposited onto TiB/sub 2/ coated alumina and sapphire substrates. Epitaxial layers were also formed on single crystal silicon substrates. Junctions in the layers were created by both gaseous diffusion in a tube furnace and by vacuum deposition. The TiB/sub 2/ vacuum deposited bottom electrodes have resistivities between 30 and 40 ..mu.. ..cap omega..-cm. All-vacuum-deposited solar cells were fabricated for the first time. Efficiencies approaching those in the diffused junction devices were achieved. The n-layers were deposited on the previously deposited p-layer/TiB/sub 2//ceramic sandwiches by vacuum deposition of silicon in a phosphine (PH/sub 3/) atmosphere. Photovoltaic data in diffused junction samples, including efficiency and spectral response measurements, indicate that crystallite size may no longer be the limiting factor in achieving high efficiency; rather, performance is now being limited by the presence of impurities in the vacuum deposition silicon base region.

Progress is reported on the development of Ocean Thermal Energy Conversion (OTEC) systems that will provide synthetic fuels (e.g., methanol), energy-intensive products such as ammonia (for fertilizers and chemicals), and aluminum. The work also includes assessment and design concepts for hybrid plants, such as geothermal-OTEC (GEOTEC) plants. Another effort that began in the spring of 1982 is a technical advisory role to DOE with respect to their management of the conceptual and preliminary design activity of industry teams that are designing a shelf-mounted offshore OTEC pilot plant that could deliver power to Oahu, Hawaii. In addition, a program is underway to evaluate and test the Pneumatic Wave-Energy Conversion System (PWECS), an ocean-energy device consisting of a turbine that is air-driven as a result of wave action in a chamber. This Quarterly Report summarizes the work on the various tasks as of 31 March 1983.

A brief narrative outline is presented of a scenario for the development of the Atlantic Coastal Plain hydrothermal resources for geothermal space heating and cooling. Listed below are the basic assumptions made in the construction of this scenario. Since this scenario is to serve as a planning document, the steps involved in geothermal development are listed and time-phased. The most critical steps in this process are indicated. This scenario summarizes geothermal development in the entire Atlantic Coastal Plain. Separate, more detailed scenarios for each specific resource area are planned as precursors to possible implementation planning.

A technical evaluation was made to determine whether geothermal energy obtained from a well could be used to space heat the new school building being constructed as well as the existing elementary wing of the Pittsville School. The first part deals with space heating the new school building only; the second part pertains to space heating the new school building together with the new existing wing. An addendum was added for new well and production pump costs. (MHR)

The methodology that has been developed to analyze the impact of possible government actions on the development of small-scale hydroelectric power in the United States is described. The application of the methodology to a specific region of the United States is also described. Within the Pennsylvania-New Jersey-Maryland (PJM) region, the methodology has been used to evaluate the significance of some of the existing institutional and economic constraints on hydroelectric development at existing dams. The basic process for the analysis and evaluation is estimation of the hydroelectric energy that can be developed for a given price of electricity. Considering the present constraints and a geographical region of interest, one should be able to quantify the potential hydroelectric energy supply versus price. Estimates of how the supply varies with possible changes in governmental policies, regulations, and actions should assist the government in making decisions concerning these governmental functions relative to hydroelectric development. The methodology for estimating the hydroelectric supply at existing dams is included.

A scenario for the development of potential geothermal resources in the Eastern Gulf Coastal Plain states of Mississippi, Alabama and Florida is explained and discussed. A description of the resources and the nature of the potential applications and energy market in this region are given. A ranking of the resources as to their energy content, potential market, etc., is described, and the assumptions and strategy used to generate the scenario are discussed. A more complete report on the detailed aspects involved in the preparation of the development scenario will be issued in the near future.

An assessment is provided of selected environmental effects of operating the cooling towers and stacks of Units No. 3 and No. 4 of the Potomac Electric Power Company's generating station at Chalk Point, Maryland. The emphasis is on the magnitude of salt deposition to the area surrounding the cooling tower due to saline water drift. A secondary but important consideration is the magnitude of salt loading due to saline drift from the stack which uses saline river water in scrubbing flue gases. This salt loading together with that of the ambient salt background is assessed for its effects on soils, crops, native vegetation and man-made structures. Other atmospheric effects examined are: enhancement of ground level fogging and icing, enhancement of precipitation, and the flight hazards to aircraft. A numerical model of drift deposition has been developed and validated against the data collected in the Dyed Drift Experiment at Chalk Point. Use of the available data model predictions indicate that with fulltime, full load operation of both 600 MW(e) units significant levels of salt deposition occur only on the plant site within 0.4 km of the source. The predicted maximum salt deposition rates are given. The effects on soils, crops and …

The Applied Physics Laboratory/Department of Energy Low Cost Flywheel Demonstration Program was initiated on 1 October 1977 and was successfully concluded on 31 December 1979. The total cost of this program was $355,190. All primary objectives were successfully achieved as follows: demonstration of a full-size, 1-kWh flywheel having an estimated cost in large-volume production of approximately $50/kWh; development of a ball-bearing system having losses comparable to the losses in a totally magnetic suspension system; successful and repeated demonstration of the low-cost flywheel in a complete flywheel energy-storage system based on the use of ordinary house voltage and frequency; and application of the experience gained in the hardware program to project the system design into a complete, full-scale, 30-kWh home-type flywheel energy-storage system.

Work on developing energy resources, utilization concepts, and storage methods is summarized and divided into three sections. The first, Geothermal Energy Development Planning, contains reports on the progress of those geothermal-related tasks where effort was concentrated during the quarter. The tasks include an ongoing Atlantic Coastal Plain Geothermal Energy Market Survey, the Delmarva Geothermal Development Prospectus, Evaluation of Federal Strategies for Hydrothermal Developments, and comments on limited tasks performed in support of the major tasks. The second section, Operational Research, Hydroelectric Power Development, includes reports on a method for quantifying institutional constraints and on institutional and regulatory restraints in New Jersey. The third section, Energy Conservation and Storage Techniques, contains a report on flywheel development.

A brief narrative outline is given of a scenario for the development of geothermal heating and cooling, (1) in the Hot Springs, Little Rock, and Pine Bluff area of central Arkansas, and (2) in the southern Arkansas area. Basic assumptions about details of the scenario and the data included therein are listed. The scenario in chart form is included. (MHR)

The objectives, methodologies, data, and analytical results of the Chalk Point Cooling Tower Program are reviewed. The overview intergrates the concepts and activities of the various program elements to provide a coherent view of the program in its entirety. Samples of the various data acquired are included together with very brief summaries of the conclusions. The report is extensively referenced to provide specific directions to the more extensive treatments of the program, data tabulations, and tape libraries available in the complete library of Chalk Point reports. The Chalk Point data is a resource for the study of cooling tower salt deposition processes and impacts in general. The methods used, while developed to facilitate the assessment of salt drift impact at Chalk Point, also have applicability to cooling tower impact analysis at other sites.

Motion studies of the General Purpose Heat Source Module, GPHS, were conducted in the heat pulse interval associated with entries from earth gravity assist trajectories. The APL six-degree-of-freedom reentry program designated TMAGRA6C was used. The objectives of the studies were to (1) determine the effect of ablation on GPHS motion, and (2) determine whether the GPHS module entering the earth's atmosphere from an earth-gravity-assist trajectory has a preferred orientation during the heat pulse phase of reentry. The results are given in summary form for easy visualization of the initial conditions investigated and to provide a quick-look of the resulting motion. Detail of the motion is also given for the parameters of interest for each case studied. Selected values of initial pitch rate, roll rate, and combinations of these within the range 0[degree] to 1000[degrees]/sec were investigated for initial reentry angles of -7[degrees] (shallow) and -90[degrees] (steep) and initial angles of attack of 0[degree] (broadface to the wind) and 90[degrees]. Although the studies are not exhaustive, a sufficient number of reentry conditions (initial altitude, reentry angle, angle of attack, rotational motion) have been investigated to deduce certain trends. The results also provide information on additional reentry conditions that need to be …

The feasibility of geothermal energy use at naval installations in Norfolk, VA, Jacksonville, FL, and Charleston, SC was assessed. Geophysical and geological studies of the above areas were performed. Engineering and economic factors, affecting potential energy use, were evaluated. The Norfolk and Jacksonville facilities are identified as candidates for geothermal systems. System costs are predicted. Economic benefits of the proposed geothermal systems are forecast, using the net present value method of predicting future income.

The Johns Hopkins University Applied Physics Laboratory, under contracts with the U.S. Department of Energy, the National Science Foundation, U.S. Maritime Administration, Maryland Department of Natural Resources, U.S. Department of Commerce, and U.S. Fish and Wildlife Service, is engaged in developing energy resources, utilization concepts, and storage methods. This report is divided into four sections. The first, Geothermal Energy Programs, contains reports on various geothermal investigations in the Atlantic Coastal Plain; a Geothermal Energy Market Survey and a development scenario for the Delmarva area of Maryland. The second, Small-Scale Hydroelectric Energy, contains the results of several major studies on dams and on the economic and institutional issues related to their redevelopment. The third section contains progress reports on two major tasks performed for the Ocean Thermal Energy Conversion (OTEC) Program, Ocean Engineering and Heat Exchangers for OTEC systems. The fourth section, Conservation and Mechanical Storage of Energy, contains reports on flywheels and a JHU-funded heat pump application to the physical plant at APL.

This report contains state-by-state fact sheets; selected scenarios for Arkansas, South Dakota, and the Coastal Plain; ERDA/DOD interfacing at selected bases in Region 5, other activities of interest; and a summary of action items/future plans. (MHR)

The Johns Hopkins University Applied Physics Laboratory is engaged in the development of energy resources, energy utilization concepts, and energy storage methods. This Quarterly Report, summarizing work completed on the various tasks as of 31 March 1978, contains comments on limited tasks, short descriptions of meetings, trips, presentations, and other limited tasks of note performed in connection with major program tasks and articles that describe these program tasks briefly, summarize the progress made to date, and indicate future efforts to be made. The major tasks fall into the following categories: Geothermal Energy Development Planning, which concentrates on the survey of potential geothermal resources and the development of scenarios for possible exploitation and utilization in DOE/DGE Region 5, which includes all the United States east of the Rocky Mountains, excluding Texas and Louisiana; Applications Study of DOE/DGE Region 5, which concerns a study of geothermal energy applications in DOE-selected areas of the Atlantic Coastal Plain; the Low-Head Hydroelectric Program; the Community Annual Storage Energy System (CASES) and the status of a development and demonstration plan for a low-cost flywheel; and multiple-objective modeling of power plant locations.

A method for the comparative evaluation of geothermal prospects in the Eastern United States is proposed and illustrated. Comparisons are based on quantified data from geologic, engineering, and socio-economic sources including temperature gradient, depth to basement, drilling costs, population, and distribution by town size, as well as energy use in residential, commercial, and industrial applications.

This quarterly report summarizes work on the following tasks: OTEC methanol; approaches for financing OTEC proof-of-concept experimental vessels; investigation of OTEC-ammonia as an alternative fuel; review of electrolyzer development programs and requirements; hybrid geothermal-OTEC power plants: single-cycle performance; estimates; and hybrid geothermal-OTEC power plants: dual-cycle performance estimates.