Serial/Series Title
Proceedings of the Workshop on Geothermal Reservoir Engineering
4
Fiscal Year 2000
3
Petroleum Supply Monthly
3
Annual Illness and Injury Surveillance Report
2
Fiscal Year 1999
2
Fiscal Year 2002
2
Science & Technology Review
2
A Novel Membrane Reactor for Direct Hydrogen Production From Coal Progress Report
1
Analysis of Devonian Black Shales in Kentucky for Potential Carbon Dioxide Sequestration and Enhanced Natural Gas Production Quarterly Report
1
Determination of Basalt Physical and Thermal Properties at Varying Temperatures, Pressures, and Moisture Contents Progress Report
1
20 More
Country
States
Decade
Month
Day
Language
3,360 Matching Results
Results open in a new window/tab.
Results:
1 - 24 of
3,360
next
Reduction of pertechnetate by acetohydroxamic acid: Formation of [TcNO(AHA)2(H2O)]+ and implications for the UREX process.
Reductive nitrosylation and complexation of ammonium pertechnetate by acetohydroxamic acid has been achieved in aqueous nitric and perchloric acid solutions. The kinetics of the reaction depend on the relative concentrations of the reaction components and are accelerated at higher temperatures. The reaction does not occur unless conditions are acidic. Analysis of the x-ray absorption fine structure spectroscopic data is consistent with a pseudo-octahedral geometry with the linear Tc-N-O bond typical of technetium nitrosyl compounds, and electron spin resonance spectroscopy is consistent with a the d{sup 5} Tc(II) nitrosyl complex. The nitrosyl source is generally AHA, but may be augmented by products of reaction with nitric acid. The resulting low-valency trans-aquonitrosyl(diacetohydroxamic)-technetium(II) complex (1) is highly soluble in water, extremely hydrophilic, and is not extracted by tri-n-butylphosphate in a dodecane diluent. Its extraction properties are not pH-dependent; titration studies indicate a single species from pH 4.5 down to -0.6 (calculated). This molecule is resistant to oxidation by H{sub 2}O{sub 2}, even at high pH, and can undergo substitution to form other technetium nitrosyl complexes. The formation of 1 may strongly impact the fate of technetium in the nuclear fuel cycle.
Date:
February 26, 2008
Creator:
1Harry Reid Center for Environmental Studies, Nuclear Science and Technology Division, University of Nevada, Las Vegas, Las Vegas, NV, 89154-4006; Gong, Cynthia-May S; Poineau, Frederic; Lukens, Wayne W & Czerwinski, Kenneth R.
Object Type:
Article
System:
The UNT Digital Library
Frequency Doubling Broadband Light in Multiple Crystals
The authors compare frequency doubling of broadband light in a single nonlinear crystal with doubling in five crystals with intercrystal temporal walk off compensation, and with doubling in five crystals adjusted for offset phase matching frequencies. Using a plane-wave, dispersive numerical model of frequency doubling they study the bandwidth of the second harmonic and the conversion efficiency as functions of crystal length and fundamental irradiance. For low irradiance the offset phase matching arrangement has lower efficiency than a single crystal of the same total length but gives a broader second harmonic bandwidth. The walk off compensated arrangement gives both higher conversion efficiency and broader bandwidth than a single crystal. At high irradiance, both multicrystal arrangements improve on the single crystal efficiency while maintaining broad bandwidth.
Date:
July 26, 2000
Creator:
ALFORD,WILLIAM J. & SMITH,ARLEE V.
Object Type:
Article
System:
The UNT Digital Library
FULL SCALE TESTING TECHNOLOGY MATURATION OF A THIN FILM EVAPORATOR FOR HIGH-LEVEL LIQUID WASTE MANAGEMENT AT HANFORD - 12125
Simulant testing of a full-scale thin-film evaporator system was conducted in 2011 for technology development at the Hanford tank farms. Test results met objectives of water removal rate, effluent quality, and operational evaluation. Dilute tank waste simulant, representing a typical double-shell tank supernatant liquid layer, was concentrated from a 1.1 specific gravity to approximately 1.5 using a 4.6 m{sup 2} (50 ft{sup 2}) heated transfer area Rototherm{reg_sign} evaporator from Artisan Industries. The condensed evaporator vapor stream was collected and sampled validating efficient separation of the water. An overall decontamination factor of 1.2E+06 was achieved demonstrating excellent retention of key radioactive species within the concentrated liquid stream. The evaporator system was supported by a modular steam supply, chiller, and control computer systems which would be typically implemented at the tank farms. Operation of these support systems demonstrated successful integration while identifying areas for efficiency improvement. Overall testing effort increased the maturation of this technology to support final deployment design and continued project implementation.
Date:
January 26, 2012
Creator:
AR, TEDESCHI; JE, CORBETT; RA, WILSON & J, LARKIN
Object Type:
Article
System:
The UNT Digital Library
Fundamental studies of fusion plasmas
The major portion of this program is devoted to critical ICH phenomena. The topics include edge physics, fast wave propagation, ICH induced high frequency instabilities, and a preliminary antenna design for Ignitor. This research was strongly coordinated with the world's experimental and design teams at JET, Culham, ORNL, and Ignitor. The results have been widely publicized at both general scientific meetings and topical workshops including the speciality workshop on ICRF design and physics sponsored by Lodestar in April 1992. The combination of theory, empirical modeling, and engineering design in this program makes this research particularly important for the design of future devices and for the understanding and performance projections of present tokamak devices. Additionally, the development of a diagnostic of runaway electrons on TEXT has proven particularly useful for the fundamental understanding of energetic electron confinement. This work has led to a better quantitative basis for quasilinear theory and the role of magnetic vs. electrostatic field fluctuations on electron transport. An APS invited talk was given on this subject and collaboration with PPPL personnel was also initiated. Ongoing research on these topics will continue for the remainder fo the contract period and the strong collaborations are expected to continue, enhancing …
Date:
May 26, 1992
Creator:
Aamodt, R. E.; Catto, P. J.; D'Ippolito, D. A.; Myra, J. R. & Russell, D. A.
Object Type:
Report
System:
The UNT Digital Library
Fundamental studies of fusion plasmas. Annual performance report
The major portion of this program is devoted to critical ICH phenomena. The topics include edge physics, fast wave propagation, ICH induced high frequency instabilities, and a preliminary antenna design for Ignitor. This research was strongly coordinated with the world`s experimental and design teams at JET, Culham, ORNL, and Ignitor. The results have been widely publicized at both general scientific meetings and topical workshops including the speciality workshop on ICRF design and physics sponsored by Lodestar in April 1992. The combination of theory, empirical modeling, and engineering design in this program makes this research particularly important for the design of future devices and for the understanding and performance projections of present tokamak devices. Additionally, the development of a diagnostic of runaway electrons on TEXT has proven particularly useful for the fundamental understanding of energetic electron confinement. This work has led to a better quantitative basis for quasilinear theory and the role of magnetic vs. electrostatic field fluctuations on electron transport. An APS invited talk was given on this subject and collaboration with PPPL personnel was also initiated. Ongoing research on these topics will continue for the remainder fo the contract period and the strong collaborations are expected to continue, enhancing …
Date:
May 26, 1992
Creator:
Aamodt, R. E.; Catto, P. J.; D`Ippolito, D. A.; Myra, J. R. & Russell, D. A.
Object Type:
Report
System:
The UNT Digital Library
Measurement of the angular distribution of electrons from W {right arrow} e{nu} decays observed in p pbar collisions at {squareroot}s = 1.8 TeV
We present a preliminary measurement of the electron angular distribution parameter {alpha}<sub>2</sub> in W {yields} e{nu} events using data collected by the D0 detector during the 1994-1995 Tevatron run. We compare our results with next-to- leading order perturbative QCD, which predicts an angular distribution of (1±{alpha}<sub>1</sub> cos{theta}* +{alpha}<sub>2</sub> cos²{theta}*), where {theta}* is the angle between the charged lepton and the antiproton in the Collins-Soper frame. In the presence of QCD corrections, the parameters {alpha}<sub>1</sub> and {alpha}<sub>2</sub> become functions of p<sup>W</sup><sub>T</sub> , the W boson transverse momentum. We present the first measurement of {alpha}<sub>2</sub> as a function of p<sup>W</sup><sub>T</sub>. This measurement is of importance, because it provides a test of next-to-leading order QCD corrections which are a non-negligible contribution to the W mass measurement.
Date:
July 26, 1999
Creator:
Abbott, B.
Object Type:
Article
System:
The UNT Digital Library
Growth of molten core debris pools in concrete. Part II. A. Pool growth in composite beds; B. Effect of overlaying steel layers. Final report, March 1, 1978-September 30, 1979. [LMFBR]
The heat and mass transfer processes taking place in molten core debris/concrete systems have been experimentally investigated. Two types of experiments have been conducted. The first experiment simulates the growth of a molten debris pool in a composite sacrificial bed. This experiment models debris pool growth in an inner, low-melting point, sacrificial material zone followed by a melting attack on the concrete bed. The purpose of the inner zone is to quickly melt and dilute the debris pool so that its subsequent downward growth in the concrete may be slowed. In the second experiment a two-layer immiscible liquid system is volumetrically heated and allowed to melt into a low-density gas releasing solid bed which is miscible in the initially-higher-density bottom liquid. The solid melts, mixes with, and dilutes the bottom liquid pool until its density is lower than that of the top liquid.
Date:
December 26, 1979
Creator:
Abdel-Khalik, S I
Object Type:
Report
System:
The UNT Digital Library
Middleware for Astronomical Data Analysis Pipelines
In this paper the authors describe the approach to research, develop, and evaluate prototype middleware tools and architectures. The developed tools can be used by scientists to compose astronomical data analysis pipelines easily. They use the SuperMacho data pipelines as example applications to test the framework. they describe their experience from scheduling and running these analysis pipelines on massive parallel processing machines. they use MCR a Linux cluster machine with 1152 nodes and Luster parallel file system as the hardware test-bed to test and enhance the scalability of the tools.
Date:
January 26, 2005
Creator:
Abdulla, G.; Liu, D.; Garlick, J.; Miller, M.; Nikolaev, S.; Cook, K. et al.
Object Type:
Article
System:
The UNT Digital Library
Simulation of the Future LSST Data Pipelines
In this paper we describe our approach to build a pipeline simulator for the future Large-scale Synoptic Survey Telescope (LSST). The simulated pipeline will be used to research and evaluate software architectures that are efficient and flexible. It will also be used to define the real-time software and hardware requirements needed to support the anticipated LSST data rates. The LSST data pipeline requirements are still being defined, however, previous surveys can provide a good source for data requirements. Our approach is to use the SuperMacho data pipeline as a prototyping tool to identify a framework for building Modular Data-Centric Pipeline (MDCP) architectures. The prototyping is done in a hierarchical fashion to help capture and define the general data attributes (schema) first. We then model other necessary components based on science and performance requirements. We use identified schemas or data attributes as a way to define a data model for LSST.
Date:
July 26, 2004
Creator:
Abdulla, Ghaleb M.
Object Type:
Article
System:
The UNT Digital Library
Interface Characterization Techniques for 304L Stainless Steel Resistance Upset Welds
In an effort to better characterize and classify austenitic stainless steel resistance upset welds, standard methods have been examined and alternative methods investigated. Optical microscopy yields subjective classification due to deformation obscured bond lines and individual perception. The use of specimen preparations that better reveal grain boundaries aids in substantiating optical information. Electron microscopy techniques produce quantitative information in relation to microstructural constituents. Orientation Imaging Microscopy (OIM) is a relatively new technique for obtaining objective, quantitative information pertaining to weld integrity, i.e., percent grain boundary growth across the interface.
Date:
July 26, 1998
Creator:
Abeln, Terri G.; Kackenko, E. Jim; Necker, Carl T. & Field, Robert D.
Object Type:
Article
System:
The UNT Digital Library
Use of a General Nonlinear Least-Squares Curve Fitting Program With Nonclosed Form Relationships. [GNLS, in FORTRAN for CDC Computers]
A use for GNLS, a general nonlinear least-squares curve fitting program, is presented. In this use GNLS determines a set of best parameters for relationships that cannot be written in closed form. This program can be useful for experimenters who need to determine experimental parameters by fitting nonclosed-form relationships to experimental data. Two examples are given to indicate how GNLS can be used for this type of problem. 11 figures.
Date:
December 26, 1979
Creator:
Abey, A. E.
Object Type:
Report
System:
The UNT Digital Library
A study of the elasticity of Ta at high temperature and pressure
The thermodynamic and transport properties of crystals and fluids at high temperature and pressure play a central role in the Earth and planetary sciences as well as in a variety of technologies and constitute a principal probe into the internuclear potential energy function at high density. Observation of surface waves by coherent time-domain optical spectroscopy provides an experimental approach to the determination, in the diamond-anvil high-pressure cell, of the elastic constants and thermal diffusivity of metal crystals as well as the equation of state and thermal transport properties of fluids. The electrical resistivities of metals may also be approximately accessible via the Wiedemann Franz Law. Preliminary results on Ta to pressures of 5.2 GPa are reported here. [Ta, elasticity, sound velocity, thermal diffusivity, equation of state].
Date:
August 26, 1998
Creator:
Abramson, E H; Brown, J M; Hansen, D W; Ruddle, C M; Slutsky, L J & Zaug, J M
Object Type:
Article
System:
The UNT Digital Library
Final Scientific Report
Viscosities of water, nitrogen and carbon dioxide have been measured at elevated pressures and temperatures in the diamond-anvil cell. A strong correlation between viscosity and entropy has been confirmed.
Date:
June 26, 2009
Creator:
Abramson, Evan
Object Type:
Report
System:
The UNT Digital Library
Thermal Decomposition of Radiation-Damaged Polystyrene
The radiation-damaged polystyrene (given the identification name of 'polycube') was fabricated by mixing high-density polystyrene material ("Dylene Fines # 100") with plutonium and uranium oxides. The polycubes were used in the 1960s for criticality studies during processing of spent nuclear fuel. The polycubes have since been stored for almost 40 years at the Hanford Plutonium Finishing Plant (PFP) after failure of two processes to reclaim the plutonium and uranium oxides from the polystyrene matrix. Thermal decomposition products from this highly cross-linked polystyrene matrix were characterized using Gas Chromatograph/Mass Spectroscopy (GC/MS) system coupled to a horizontal furnace. The decomposition studies were performed in air and helium atmospheres at about 773 K. The volatile and semi-volatile organic products for the radiation-damaged polystyrene were different compared to virgin polystyrene. The differences were in the number of organic species generated and their concentrations. In the inert (i.e., helium) atmosphere, the major volatile organic products identified (in order of decreasing concentrations) were styrene, benzene, toluene, ethylbenzene, xylene, nathphalene, propane, .alpha.-methylbenzene, indene and 1,2,3-trimethylbenzene. But in air, the major volatile organic species identified changed slightly. Concentrations of the organic species in the inert atmosphere were significantly higher than those for the air atmosphere processing. Overall, 38 …
Date:
September 26, 2000
Creator:
Abrefah, John & Klinger, George S.
Object Type:
Report
System:
The UNT Digital Library
Development of a stable cobalt-ruthenium Fischer-Tropsch catalyst
The work performed in the program suggests that cobalt catalytic performance is a complex function of crystallite size, crystallite composition, and cobalt-support interaction. These properties are determined by the nature of support, the bimetallic component, the promoters, and the method of preparation. Results so far indicate that the lowest methane selectivity occurs on support No. 8, and the highest activity is obtained on support No. 10. Also, promoters 2 and 3 may help lower the formation of methane. These findings, along with the catalyst knowledge gained during Union Carbide's former contract AC22-84PC70028, will be used to develop a superior cobalt catalyst.
Date:
August 26, 1992
Creator:
Abrevaya, H.
Object Type:
Report
System:
The UNT Digital Library
Development of a stable cobalt-ruthenium Fischer-Tropsch catalyst. Technical progress report No. 9, October 1, 1991--December 31, 1991
The work performed in the program suggests that cobalt catalytic performance is a complex function of crystallite size, crystallite composition, and cobalt-support interaction. These properties are determined by the nature of support, the bimetallic component, the promoters, and the method of preparation. Results so far indicate that the lowest methane selectivity occurs on support No. 8, and the highest activity is obtained on support No. 10. Also, promoters 2 and 3 may help lower the formation of methane. These findings, along with the catalyst knowledge gained during Union Carbide`s former contract AC22-84PC70028, will be used to develop a superior cobalt catalyst.
Date:
August 26, 1992
Creator:
Abrevaya, H.
Object Type:
Report
System:
The UNT Digital Library
EARLY ENTRANCE COPRODUCTION PLANT
The overall objective of this project is the three phase development of an Early Entrance Coproduction Plant (EECP) which produces at least one product from at least two of the following three categories: (1) electric power (or heat), (2) fuels, and (3) chemicals. The objective is to have these products produced by technologies capable of using synthesis gas derived from coal and/or other carbonaceous feedstock. The objective of Phase I is to determine the feasibility and define the concept for the EECP located at a specific site and to develop a Research, Development, and Testing Plan (RD and T) for implementation in Phase II. The objective of Phase II is to implement the RD and T as outlined in the Phase I RD and T Plan to enhance the development and commercial acceptance of coproduction technology that produces high-value products, particularly those that are critical to our domestic fuel and power requirements. The project will resolve critical knowledge and technology gaps on the integration of gasification and downstream processing to coproduce some combination of power, fuels, and chemicals from coal and other feedstocks. The objective of Phase III is to develop an engineering design package and a financing plan for …
Date:
October 26, 2000
Creator:
Abughazaleh, John S.; Ahmed, Mushtaq; Anand, Ashok; Anderson, John H.; Benham, Charles; Brent, Fred D. et al.
Object Type:
Report
System:
The UNT Digital Library
Insulated Pressure Vessels for Vehicular Hydrogen Storage: Analysis and Performance Evaluation
Insulated pressure vessels are cryogenic-capable pressure vessels that can be fueled with liquid hydrogen (LH{sub 2}) or ambient-temperature compressed hydrogen (CH{sub 2}). Insulated pressure vessels offer the advantages of liquid hydrogen tanks (low weight and volume), with reduced disadvantages (fuel flexibility, lower energy requirement for hydrogen liquefaction and reduced evaporative losses). The work described here is directed at verifying that commercially available pressure vessels can be safely used to store liquid hydrogen. The use of commercially available pressure vessels significantly reduces the cost and complexity of the insulated pressure vessel development effort. This paper describes a series of tests that have been done with aluminum-lined, fiber-wrapped vessels to evaluate the damage caused by low temperature operation. All analysis and experiments to date indicate that no significant damage has resulted. Required future tests are described that will prove that no technical barriers exist to the safe use of aluminum-fiber vessels at cryogenic temperatures. Future activities also include a demonstration project in which the insulated pressure vessels will be installed and tested on two vehicles. A draft standard will also be generated for obtaining certification for insulated pressure vessels.
Date:
June 26, 2001
Creator:
Aceves, S. M.; Martinez-Frias, J.; Garcia-Villazana, O. & Espinosa-Loza, F.
Object Type:
Article
System:
The UNT Digital Library
Monitoring the Migrations of Wild Snake River Spring/Summer Chinook Salmon Juveniles, 2007-2008 Report of Research.
This report provides results from an ongoing project to monitor the migration behavior and survival of wild juvenile spring/summer Chinook salmon in the Snake River Basin. Data reported is from detections of PIT tagged fish during late summer 2007 through mid-2008. Fish were tagged in summer 2007 by the National Marine Fisheries Service (NMFS) in Idaho and by the Oregon Department of Fish and Wildlife (ODFW) in Oregon. Our analyses include migration behavior and estimated survival of fish at instream PIT-tag monitors and arrival timing and estimated survival to Lower Granite Dam. Principal results from tagging and interrogation during 2007-2008 are listed below: (1) In July and August 2007, we PIT tagged and released 7,390 wild Chinook salmon parr in 12 Idaho streams or sample areas. (2) Overall observed mortality from collection, handling, tagging, and after a 24-hour holding period was 1.4%. (3) Of the 2,524 Chinook salmon parr PIT tagged and released in Valley Creek in summer 2007, 218 (8.6%) were detected at two instream PIT-tag monitoring systems in lower Valley Creek from late summer 2007 to the following spring 2008. Of these, 71.6% were detected in late summer/fall, 11.9% in winter, and 16.5% in spring. Estimated parr-to-smolt survival …
Date:
May 26, 2009
Creator:
Achord, Stephen; Sandford, Benjamin P. & Hockersmith, Eric E.
Object Type:
Report
System:
The UNT Digital Library
Results of applying a non-evaporative mitigation technique to laser-initiated surface damage on fused-silica
We present results from a study to determine an acceptable CO{sub 2} laser-based non-evaporative mitigation protocol for use on surface damage sites in fused-silica optics. A promising protocol is identified and evaluated on a set of surface damage sites created under ICF-type laser conditions. Mitigation protocol acceptability criteria for damage re-initiation and growth, downstream intensification, and residual stress are discussed. In previous work, we found that a power ramp at the end of the protocol effectively minimizes the residual stress (<25 MPa) left in the substrate. However, the biggest difficulty in determining an acceptable protocol was balancing between low re-initiation and problematic downstream intensification. Typical growing surface damage sites mitigated with a candidate CO{sub 2} laser-based mitigation protocol all survived 351 nm, 5 ns damage testing to fluences >12.5 J/cm{sup 2}. The downstream intensification arising from the mitigated sites is evaluated, and all but one of the sites has 100% passing downstream damage expectation values. We demonstrate, for the first time, a successful non-evaporative 10.6 {micro}m CO{sub 2} laser mitigation protocol applicable to fused-silica optics used on fusion-class lasers like the National Ignition Facility (NIF).
Date:
October 26, 2010
Creator:
Adams, J. J.; Bolourchi, M.; Bude, J. D.; Guss, G. M.; Matthews, M. J. & Nostrand, M. C.
Object Type:
Article
System:
The UNT Digital Library
Technical basis for establishing process tube pressure limits for KER loops 2 and 3 and for the NPR Prototype Facility
In compliance with a request from Coolant Testing Operation, the Reactor Engineering Operation has made a study to determine the maximum operating pressure limits for the pertinent Zircaloy-2 process tubes. Since these tubes shall be used for testing NPR fuel elements, it is considered desirable that KER Loops 2 and 3 permit operation at temperatures of around 300{degrees}C while the NPR prototype facility permit operation at about 316{degrees}C in a manner such that there is minimum hazard to the KE-Reactor and to personnel.
Date:
June 26, 1959
Creator:
Adams, O. E.
Object Type:
Report
System:
The UNT Digital Library
Final report: Efficient thyratron modulator project
The purpose of this program was to examine methods of increasing the efficiency of producing pulses to drive Klystrons in the 150 MW range. This may include 2 Klystrons in the 75 MW range. Specific methods of interest to improve the pulse efficiency were the use of a circuit to add energy to the tail of the pulse, the use of a bipyrimidal transformer, and the use of gas insulation as a means of improving the pulse shape. These methods were investigated using both thyratron and IGBT switching. The low cost designs developed in this work consisted of low voltage designs which don't require the oil immersion. These designs can be ''hot tuned'' based on the use of simple, tunable inductors.
Date:
November 26, 1999
Creator:
Adler, R. J.; Richter-Sand, R. J. & Gregg, C. W.
Object Type:
Report
System:
The UNT Digital Library
Waste and Solvent Composition Limits for Modular Caustic-Side Solvent Extraction Unit (MCU)
This study examined waste feed and solvent limits for the Modular Caustic-Side Solvent Extraction Unit (MCU) currently being designed and built at the Savannah River Site (SRS) to remove cesium from highly alkaline radioactive waste. The study involved proposing ranges for 12 waste feed components (i.e., Na{sup +}, K{sup +}, Cs{sup +}, OH{sup -}, NO{sub 3}{sup -}, NO{sub 2}{sup -}, Cl{sup -}, F{sup -}, SO{sub 4}{sup 2-}, PO{sub 4}{sup 3-}, and CO{sub 3}{sup 2-}, and AlO{sub 2}{sup -}) through a compilation of SRS waste data. Statistical design methods were used to generate numerous wastes with varying compositions from the proposed ranges. An Oak Ridge National Laboratory (ORNL) model called SXFIT was used to predict the cesium extraction distribution coefficients (D-values) between the organic (solvent) phase and the aqueous waste phase using the waste component concentrations as inputs. The D-values from the SXFIT model were used as input along with MCU base case process parameters to a SASSE (Spreadsheet Algorithm for Stagewise Solvent Extraction) model to calculate final cesium concentrations for the MCU. The SASSE model was developed at Argonne National Laboratory (ANL). The SXFIT D-value and the waste component concentration data were used to develop a handier alternative model (neural …
Date:
May 26, 2005
Creator:
Adu-Wusu, Kofi; Waler, Douglas D. & Edwards, Thomas B
Object Type:
Report
System:
The UNT Digital Library
A New Dynamical Diffraction-Based Technique of the Residual Stress Measurements in Thin Films
The recently discovered dynamical diffraction effect ''neutron camel'' was used for the residual stress measurements in a thick Si(111) crystal coated with a 2000 {angstrom} thick Ni film. The observed asymmetry of the back-face rocking curve corresponds to the bending radius of {approx} 19 km and the tension force applied to the Ni film is {approx} 90 N/m. Relative deformation of the Si crystallographic cells in the vicinity of diffractive surfaces is |{partial_derivative}u{sub z}/{partial_derivative}z| {approx} 1.6 x 10{sup -6}.
Date:
July 26, 2001
Creator:
Agamalian, M.
Object Type:
Article
System:
The UNT Digital Library