We construct T-duality on K3 surfaces. The T-duality exchanges a 4-brane R-R charge and a O-brane R-R charge. We study the action of the T-duality on the moduli space of O-branes located at points of K3 and 4-branes wrapping it. We apply the construction to F-theory compactified on a Calabi-Yau 4-fold and study the duality of N = 2 SU(N{sub c}) gauge theories in four dimensions. We discuss the generalization to the N = 1 duality scenario.

Protecting a structure against earthquake excitation by supporting it on laminated elastomeric bearings has become a widely accepted practice. The ability to perform accurate simulation of the system, including FEA of the bearings, would be desirable--especially for key installations. In this paper attempts to model the behavior of elastomeric earthquake bearings are outlined. Attention is focused on modeling highly-filled, low-modulus, high-damping elastomeric isolator systems; comparisons are made between standard triboelastic solid model predictions and test results.

The Windows Calorimeter Control (WinCal) Program System Design Description contains a discussion of the design details for the WinCal product. Information in this document will assist a developer in maintaining the WinCal system. The content of this document follows the guidance in WHC-CM-3-10, Software Engineering Standards, Standard for Software User Documentation.

None

This document describes the operating procedure for the System Configuration Control Board (SCCB) performed in support of the Windows Calorimeter Control (WinCal) system. This board will consist of representatives from Babcock & Wilcox Hanford Company Babcock & Wilcox Protec, Inc.; and Lockheed Martin Services, Inc. In accordance with agreements for the joint use of the Babcock & Wilcox Hanford Company calorimeters located in the Hanford Site Plutonium Finishing Plant (PFP) Nondestructive Assay Laboratory, concurrence regarding changes to the WinCal system will be obtained from the International Atomic Energy Agency (IAEA). Further, changes to the WinCal software will be communicated to Los Alamos National Laboratory.

This Appendix contains material from the LLNL Health and Safety Manual as listed below. For sections not included in this list, please refer to the Manual itself. The areas covered are: asbestos, lead, fire prevention, lockout, and tag program confined space traffic safety.

The Construction Safety Program (CSP) for NIF sets forth the responsibilities, guidelines, rules, policies and regulations for all workers involved in the construction, special equipment installation, acceptance testing, and initial activation and operation of NIF at LLNL during the construction period of NIF.

A high-frequency, high-resolution electromagnetic (EM) imaging system has been developed for environmental geophysics surveys. Some key features of this system include: (1) rapid surveying to allow dense spatial sampling over a large area, (2) high-accuracy measurements which are used to produce a high-resolution image of the subsurface, (3) measurements which have excellent signal-to-noise ratio over a wide bandwidth (31 kHz to 32 MHz), (4) elimination of electric-field interference at high frequencies, (5) large-scale physical modeling to produce accurate theoretical responses over targets of interest in environmental geophysics surveys, (6) rapid neural network interpretation at the field site, and (7) visualization of complex structures during the survey. Four major experiments were conducted with the system: (1) Data were collected for several targets in our physical modeling facility. (2) The authors tested the system over targets buried in soil. (3) The authors conducted an extensive survey at the Idaho National Engineering Laboratory (INEL) Cold Test Pit (CTP). The location of the buried waste, category of waste, and thickness of the clay cap were successfully mapped. (4) The authors ran surveys over the acid pit at INEL. This was an operational survey over a hot site. The interpreted low-resistivity region correlated closely with …

This project involves the development of an optimized, bench-scale processing circuit capable of efficiently removing trace elements from run-of-mine coals. The optimized circuit will be developed using characterization data obtained from detailed washability suicides and release analyses tests conducted with several eastern U.S. coals. The optimized circuit will incorporate a variety of conventional and advanced coal cleaning processes which are believed to be the most cost-effective and commercially viable. The coal products from the optimized circuit will be further treated with complexing agents specifically designed to extract organometallic trace elements that are difficult to remove by physical cleaning operations. Finally, innovative bioremediation schemes will be investigated as a means of controlling the release of trace elements from the process waste streams. Emphasis has been placed on the development of a processing circuit which (i) maximizes the rejection of trace elements, (ii) minimizes the production of coal fines which are costly to process and less marketable, and (iii) minimizes the downstream impacts of the process waste streams on the environment.

An effort is underway to provide waste inventory estimates that will serve as standard characterization source terms for the various waste management activities. As part of this effort, an evaluation of available information for single-shell tank 241-TX-110 was performed, and a best-basis inventory was established. This work follows the methodology that was established by the standard inventory task.

An effort is underway to provide waste inventory estimates that will serve as standard characterization source terms for the various waste management activities. As part of this effort, an evaluation of available information for single-shell tank 241-TX-114 was performed, and a best-basis inventory was established. This work follows the methodology that was established by the standard inventory task. The best-basis inventory is based on an engineering assessment of waste type, process flowsheet data, early sample data, and other available information. The Standard Inventories of Chemicals and Radionuclides in Hanford Site Tank Wastes (Kupfer et al. 1997) describes standard methodology used to derive the tank-by-tank best-basis inventories. This preliminary TCR will be updated using this same methodology when additional data on tank contents become available.

This report is intended to serve as a status report, which essentially transmits the data that have been collected to date on the Large Block Test (LBT). The analyses of data will be performed during FY98, and then a complete report will be prepared. This status report includes introductory material that is not needed merely to transmit data but is available at this time and therefore included. As such, this status report will serve as the template for the future report, and the information is thus preserved.

New target designs for the Omega upgrade laser and ignition targets in the National Ignition Facility (NIF) require thick (80 - 100 {micro}m) cryogenic fuel layers. The Omega upgrade target will require cryogenic handling after initial fill because of the high fill pressures and the thin capsule walls. For the NIF indirectly driven targets, a larger capsule size and new materials offer hope that they can be built, filled and stored in a manner similar to the targets used in the Nova facility without requiring cryogenic handling.

Four conductively coupled thermoelectric cells, developed under the SP100 program, have been life tested. These cells, referred to as TOC (Task Order Contract) cells, were fourth generation cells, and incorporated design improvements to extend operating life. GS526 glass had been added to suppress the loss of Ge from the MoGe bond between the SiGe and the barrier graphite. The previous generation was life limited by the degradation of this electrical bond at the SiGe to graphite hot side interface due to the Ge loss. This led to abnormal internal resistance trends. The TOC cell test data and post test diagnostic have confirmed the effectiveness of the perimeter glass. Three of the four cells demonstrated normal electrical performance trends. The fourth cell (No. 139) tested at JPL showed an abnormal increase in internal resistance and a shift in temperature levels at 12,400 hours following a facility shutdown and restart. When the cell was removed from the test fixture, separation occurred between the hot side compliant pad facesheet and the niobium filament bundles. No degradation of the bond between the SiGe and the barrier graphite was found and the change in slope of the internal resistance was attributed to changes in the …

This report describes a computational model of a copper laser amplifier. The model contains rate equations for copper and the buffer gas species (neon and hydrogen), along with equations for the electron temperature, the laser intensity, and the diffusing magnetic field of the discharge. Rates are given for all pertinent atomic reactions. The radial profile of the gas temperature is determined by the time-averaged power deposited in the gas. The presence of septum inserts, which aid gas cooling, is taken into account. Fields are calculated consistently throughout the plasma and the surrounding insulation. Employed in conjunction with a modulator model, the model is used to calculate comprehensive performance predictions for a high- power operational amplifier.

We have observed circular and linear magnetic dichroism in angle- resolved photoemission spectra of 50-monolayer Gd film grown on Y(0001) and 6-monolayer Fe-Ni alloy films grown on Cu(001). The 4f level of Gd and the Fe 3p level of the Fe-Ni alloy were measured. A different geometry was used for the magnetic circular dichroism than was used to measure the magnetic linear dichroism. The geometries were chosen so that the shape of the magnetic circular dichroism is predicted to be equal to the shape of the magnetic linear dichroism for four-fold symmetric Fe-Ni/Cu(001) but not for three-fold symmetric Gd/Y(0001). Experimental results are presented. In this paper we examine the effect of symmetry (experimental geometry and sample geometry) on magnetic linear and circular dichroism in angle- resolved photoemission. In particular we chose separate geometries for measuring magnetic circular and magnetic linear dichroism. The geometries were chosen such that samples with four-fold symmetry about the sample normal may have magnetic circular and magnetic linear dichroism of the same shape. But samples with three-fold symmetry should not exhibit circular and magnetic linear dichroism of the same shape. The samples studied are three-fold symmetric Gd films grown on Y(0001) and four-fold symmetric Fe-Ni alloy …

This test plan specifies the requirements and conditions for the injection of tracer gases into eight tanks. Eight single shell tanks shall be injected with inert tracer gas, Helium (He), and then samples taken periodically to measure breathing rates. The eight tanks to be tested are; A-101, AX-102, AX-103, BY-105, C-107, U-103 (tested once in the winter and will be tested once in the summer), and U-105. The headspace of these tanks shall be sampled and analyzed periodically to obtain breathing rate information.

An effort is underway to provide waste inventory estimates that will serve as standard characterization source terms for the various waste management activities. As part of this effort, an evaluation of available information for single-shell tank 241-C-102 was performed, and a best-basis inventory was established. This work follows the methodology that was established by the standard inventory task.

This report describes methods for communicating health physics information to personnel.

The impending transition of the Hartford Site management and operations (M&O) contract to a management and integrating (M&I) contract format, together with weak radiological performance assessments by external organizations and reduced financial budgets prompted the `re-engineering` of the previous Hanford prime contractor Radiological Control (Rad Con) organization. This paper presents the methodology, identified areas of improvements, and results of the re-engineering process. The conversion from the M&O to the M&I contract concept resulted in multiple independent Rad Con organizations reporting to separate major contractors who are managed by an integrating contractor. This brought significant challenges when establishing minimum site standards for sitewide consistency, developing roles and responsibilities, and maintaining site Rad Con goals. Championed by the previous contractor`s Rad Con Director, Denny Newland, a five month planning effort was executed to address the challenges of the M&I and to address identified weaknesses. Fluor Daniel Hanford assumed the responsibility as integrator of the Project Hanford Management Contract on October 1, 1996. The Fluor Daniel Hanford Radiation Protection Director Jeff Foster presents the results of the re-engineering effort, including the significant cost savings, process improvements, field support improvements, and clarification of roles and responsibilities that have been achieved.

This document is a preliminary Tank Characterization Report (TCR). It only contains the current best-basis inventory (Appendix D) for single-shell tank 241-TX-113. No TCRs have been previously issued for this tank, and current core sample analyses are not available. The best-basis inventory, therefore, is based on an engineering assessment of waste type, process flowsheet data, early sample data, and/or other available information. The Standard Inventories of Chemicals and Radionuclides in Hanford Site Tank Wastes describes standard methodology used to derive the tank-by-tank best-basis inventories. This preliminary TCR will be updated using this same methodology when additional data on tank contents become available.

This engineering report will discuss the ventilation tasks necessary for minimizing the current K3 ventilation systems volumetric airflows while continuing to maintain negative pressures in both the canyon area and the related hot cells, assuring radiological confinement and containment of WESF.

The SDD documents the Structures, Systems, and Components that establish the facility Safety Envelope for the Cementation of SS&C.

The program is composed of 20 projects, of which 17 are laboratory bench or laboratory pilot scale processes or computer process simulations that are performed in existing facilities on the University of Utah campus in north-east Salt Lake City. These tasks are: (1) coupled fluidized-bed bitumen recovery and coked sand combustion; (2) water-based recovery of bitumen; (3) oil sand pyrolysis in a continuous rotary kiln reactor; (4) oil sand pyrolysis in a large diameter fluidized bed reactor; (5) oil sand pyrolysis in a small diameter fluidized bed reactor; (6) combustion of spent sand in a transport reactor; (7) recovery and upgrading of oil sand bitumen using solvent extraction methods; (8) fixed-bed hydrotreating of Uinta Basin bitumens and bitumen-derived hydrocarbon liquids; (9) ebullieted bed hydrotreating of bitumen and bitumen derived liquids; (10) bitumen upgrading by hydropyrolysis; (11) evaluation of Utah`s major oil sand deposits for the production of asphalt, high-energy jet fuels and other specialty products; (12) characterization of the bitumens and reservoir rocks from the Uinta Basin oil sand deposits; (13) bitumen upgrading pilot plant recommendations; (14) liquid-solid separation and fine tailings thickening; (15) in-situ production of heavy oil from Uinta Basin oil sand deposits; (16) oil sand research and …