The development of neutron detectors makes extensive use of the predictions of detector response through the use of Monte Carlo techniques in conjunction with the point reactor model. Unfortunately, the point reactor model fails to accurately predict detector response in common applications. For this reason, the general Monte Carlo N-Particle code (MCNP) was modified to simulate the pulse streams that would be generated by a neutron detector and normally analyzed by a shift register. This modified code, MCNP - Random Exponentially Distributed Neutron Source (MCNP-REN), along with the Time Analysis Program (TAP) predict neutron detector response without using the point reactor model, making it unnecessary for the user to decide whether or not the assumptions of the point model are met for their application. MCNP-REN is capable of simulating standard neutron coincidence counting as well as neutron multiplicity counting. Measurements of MOX fresh fuel made using the Underwater Coincidence Counter (UWCC) as well as measurements of HEU reactor fuel using the active neutron Research Reactor Fuel Counter (RRFC) are compared with calculations. The method used in MCNP-REN is demonstrated to be fundamentally sound and shown to eliminate the need to use the point model for detector performance predictions.

Automatic control of fine coal cleaning circuits has traditionally been limited by the lack of sensors for on-line ash analysis. Although several nuclear-based analyzers are available, none have seen widespread acceptance. This is largely due to the fact that nuclear sensors are expensive and tend to be influenced by changes in seam type and pyrite content Recently, researchers at VPI&SU have developed an optical sensor for phosphate analysis. The sensor uses image processing technology to analyze video images of phosphate ore. It is currently being used by Texas gulf for off-line analysis of dry flotation concentrates. The primary advantages of optical sensors over nuclear sensors are that they are significantly cheaper, are not subject to measurement variations due to changes in high atomic number minerals, are inherently safer and require no special radiation permitting. The purpose of this work is to apply the knowledge gained in the development of an optical phosphate analyzer to the development of an on-line ash analyzer for fine coal slurries. During the past quarter, a new prototype sample presentation system for the optical analyzer has been developed. This new approach appears to solve the problems encountered with previous prototypes. A qualitative comparison of the images …

The North Star Research Corporation Medical Waste project is described in this report, with details of design, construction, operation, and results to date. The project began with preliminary design of the accelerator. The initial design was for a single accelerator chamber with a vacuum tube cavity driver built into the chamber itself, rather than using a commercial tube separate from the RF accelerator. The authors believed that this would provide more adjustability and permit better coupling to be obtained. They did not have sufficient success with that approach, and finally completed the project using a DC accelerator with a unique new scanning system to irradiate the waste.

This document is a report on our activities in FY03 exploring nuclear safety and hazard analysis issues relevant to the Rare Isotope Accelerator (RIA). It is not clear whether DOE will classify the RIA as an accelerator facility subject to the accelerator-specific safety requirements of DOE Order 420.2A or as a nonreactor nuclear facility subject to the requirements of 10 CFR 830. The final outcome of this issue will have significant impact on the construction and operation of the facility and the quality assurance requirements for items or services that may affect nuclear safety. The resolution of this issue will be an important earlier decision for the RIA project team and will require early consultation with the appropriate DOE authorities. For nuclear facilities, facility hazard classification depends on the inventory of releasable radionuclides; therefore, some simplistic, scoping inventory calculations for some assumed targets and beams are done to estimate the hazard category of RIA if it is declared a nuclear facility. These calculations show that for the scenarios analyzed, RIA would produce sufficient quantities of radionuclides to be classified as a Category 3 nuclear facility. Over the lifetime of RIA operations, it may be possible to build up Category 2 …

This report summarizes the accomplishment made during the second year of this cooperative research effort between Washington University, Ohio State University and Air Products and Chemicals. The technical difficulties that were encountered in implementing Computer Automated Radioactive Particle Tracking (CARPT) in high pressure SBCR have been successfully resolved. New strategies for data acquisition and calibration procedure have been implemented. These have been performed as a part of other projects supported by Industrial Consortium and DOE via contract DE-2295PC95051 which are executed in parallel with this grant. CARPT and Computed Tomography (CT) experiments have been performed using air-water-glass beads in 6 inch high pressure stainless steel slurry bubble column reactor at selected conditions. Data processing of this work is in progress. The overall gas holdup and the hydrodynamic parameters are measured by Laser Doppler Anemometry (LDA) in 2 inch slurry bubble column using Norpar 15 that mimic at room temperature the Fischer Tropsch wax at FT reaction conditions of high pressure and temperature. To improve the design and scale-up of bubble column, new correlations have been developed to predict the radial gas holdup and the time averaged axial liquid recirculation velocity profiles in bubble columns.

This report summarizes the accomplishment made during the first year of this cooperative research effort between Washington University, Ohio State University and Air Products and Chemicals. A technical review of the variables affecting the SBCR performance, some aspects of bubble dynamics and hydrodynamics properties and physical properties of FT waxes and catalyst have been performed. The needed experimental facilities and measurement techniques have been evaluated and prepared. Exxon Norpar 14 has been suggested as a solvent to be used that mimics at room temperature and pressure up to 200 psi the hydrodynamics of FT waxes. A new correlation has been developed and tested to predict gas-liquid mass transfer coefficient at high pressure operation based on high pressure gas holdup and atmospheric data of gas-liquid mass transfer coefficient.

This report summarizes the accomplishment made during the third year of this cooperative research effort between Washington University, Ohio State University and Air Products and Chemicals. Data processing of the performed Computer Automated Radioactive Particle Tracking (CARPT) experiments in 6 inch column using air-water-glass beads (150 {micro}m) system has been completed. Experimental investigation of time averaged three phases distribution in air-Therminol LT-glass beads (150 {micro}m) system in 6 inch column has been executed. Data processing and analysis of all the performed Computed Tomography (CT) experiments have been completed, using the newly proposed CT/Overall gas holdup methodology. The hydrodynamics of air-Norpar 15-glass beads (150 {micro}m) have been investigated in 2 inch slurry bubble column using Dynamic Gas Disengagement (DGD), Pressure Drop fluctuations, and Fiber Optic Probe. To improve the design and scale-up of bubble column reactors, a correlation for overall gas holdup has been proposed based on Artificial Neural Network and Dimensional Analysis.

Nuclear power cost is plotted versus thermal efficiency. The relationship is not limited to any particular reactor type and is applicable for any reactor system where steam is the working fiuid for the turbogenerator. (T- R.H-)

Distributed power is modular electric generation or storage located close to the point of use. Based on interviews of distributed generation project proponents, this report reviews the barriers that distributed generators of electricity are encountering when attempting to interconnect to the electrical grid. Descriptions of 26 of 65 case studies are included in the report. The survey found and the report describes a wide range of technical, business-practice, and regulatory barriers to interconnection. An action plan for reducing the impact of these barriers is also included.

The laboratory cyclone incinerator has been developed to study the effects of burning feed containing radionuclides other than plutonium-238. These isotopes, which will be primarily products of fission, must be efficiently removed from the off-gas if combustible waste containing such species is to be incinerated. Modifications to the original incinerator design were made to increase the efficiency of combustion and particulate removal in the system and to reduce its energy consumption. A drum compactor was purchased, installed, and tested. The test results were as expected; a 55-gal steel drum volume was reduced by 86%. The ash/cement matrix studies were completed. The 65/35 mixture proved to be the best for dry-cure pellets, and the 80/20 mixture produced the best wet-cured pellets. Experimental incinerator ash was successfully sintered; the final carbon content was less than 0.1 wt%.

A thermal analysis of a deep geologic depository for spent nuclear fuel is being conducted. The TRUMP finite difference heat transfer code is used to analyze a 3-dimensional model of the depository. The model uses a unit cell consisting of one spent fuel canister buried in salt beneath a ventilated room in the depository. A base case was studied along with several parametric variations. It is concluded that this method is appropriate for analyzing the thermal response of the system, and that the most important parameter in determining the maximum temperatures is the canister heat generation rate. The effects of room ventilation and different depository media are secondary.

At the NRC�s request, ORAU conducted confirmatory surveys of the FNR during the period of December 4 through 6, 2012. The survey activities included visual inspections and measurement and sampling activities. Confirmatory activities also included the review and assessment of UM�s project documentation and methodologies. Surface scans identified elevated activity in two areas. The first area was on a wall outside of Room 3103 and the second area was in the southwest section on the first floor. The first area was remediated to background levels. However, the second area was due to gamma shine from a neighboring source storage area. A retrospective analysis of UM�s FSS data shows that for the SUs investigated by the ORAU survey team, UM met the survey requirements set forth in the FSSP. The total mean surface activity values were directly compared with the mean total surface activity reported by UM. Mean surface activity values determined by UM were within two standard deviations of the mean determined by ORAU. Additionally, all surface activity values were less than the corresponding gross beta DCGLW. Laboratory analysis of the soil showed that COC concentrations were less than the respective DCGLW values. For the inter-lab comparison, the DER was …

Research efforts described in this progress report concentrated on the synthesis and exploration of f-electron based materials exhibiting novel properties at low temperatures and on the development of a new experimental technique for low temperatures and high magnetic fields. Specific problems studied included non-Fermi liquid behavior and experimental verifications of novel theories concerned with strong electron correlations. The discovery of non-Fermi liquid behavior has been one of the major physics discoveries of the last decade that undermined the most established theory of condensed matter. Our work has helped with the clarification of the origin of non-Fermi liquid behavior. The experimental technique we have developed allows for simultaneous measurements of electronic specific heat and nuclear spin-lattice relaxation time T1 at very low temperatures (down to 60 mK) and very high fields (to 30 T). This project provided its participants with the training in strategic ally sensitive area of the synthesis and characterization of materials.

The status summary of Nuclear Energy Research Initiative (NERI) Tasks - Phase 1 are: Task 1--The development of the following methods in 1D slab geometry: (1) Homogenization and definition of discontinuity factors, (2) Group constants functionalization using assembly transport solution of multigroup eigenvalue problem with albedo boundary conditions, and (3) solving coarse-mesh effective few-group 1D QD moment equations using tables of data parameterized with respect to the ratio {rvec n} {center_dot} {rvec J}{sup G}/{tilde {phi}{sup G}} on boundaries. Status summary of NERI Tasks - Phase 1: Task 2--Development of a numerical method for solving the 2D few-group moment QD equations: (1) Development of a nodal discretization method for 2D moment QD equations, and (2) Development of an efficient iteration method for solving the system of equations of the nodal discretization method for 2D moment QD equations.

Computer modeling to determine fenestration product energy properties (U-factor, SHGC, VT) has emerged as the most cost-effective and accurate means to quantify them. Fenestration product simulation tools have been effective in increasing the use of low-e coatings and gas fills in insulating glass and in the widespread use of insulating frame designs and materials. However, for more efficient fenestration products (low heat loss products, dynamic products, products with non-specular optical characteristics, light re-directing products) to achieve widespread use, fenestration modeling software needs to be improved. This paper addresses the following questions: (1) Are the current properties (U, SHGC, VT) calculated sufficient to compare and distinguish between windows suitable for Zero Energy Buildings and conventional window products? If not, what data on the thermal and optical performance, on comfort, and on peak demand of windows is needed. (2) Are the algorithms in the tools sufficient to model the thermal and optical processes? Are specific heat transfer and optical effects not accounted for? Is the existing level of accuracy enough to distinguish between products designed for Zero Energy Buildings? Is the current input data adequate?

Hydraulic tests were made on the Hallam Prototype Free-Surface Sodium Pump to determine the net positive suction head (NPSH) required at various sodium flow rates. Pump performance data were also collected. The results indicate that an NPSH of 22 ft sodium is required at the design flow rate of 7200 gpm at approximates 1000 deg F, agreeing with computed values, and that the pump is designed with a safety margin of slightly over l0%. (D.L.C.)

The authors present a study of hadronic transitions between {Upsilon}(mS) (m = 4,3,2) and {Upsilon}(nS) (n = 2,1) resonances based on 347.5 fb{sup -1} of data taken with the BABAR detector at the PEP-II storage rings.

None

Using 214 fb{sup -1} of data recorded by the BABAR detector at the PEPII electron-positron collider, they study the decay D{sub s}{sup +} {yields} K{sup +}K{sup -}e{sup +}{nu}{sub e}. Except for a small S-wave contribution, the events with K{sup +}K{sup -} masses in the range 1.01-1.03 GeV/c{sup 2} correspond to {phi} mesons. For D{sub s}{sup +} {yields} {phi}e{sup +}{nu}{sub e} decays, they measure the relative normalization of the Lorentz invariant form factors at q{sup 2} = 0, r{sub V} = V(0)/A{sub 1}(0) = 1.849 {+-} 0.060 {+-} 0.095, r{sub 2} = A{sub 2}(0)/A{sub 1}(0) = 0.763 {+-} 0.071 {+-} 0.065 and the pole mass of the axial-vector form factors m{sub A} = (2.28{sub -0.18}{sup +0.23} {+-} 0.18) GeV/c{sup 2}. Within the same K{sup +}K{sup -} mass range, they also measure the relative branching fractions {Beta}(D{sub s}{sup +} {yields} K{sup +}K{sup -}e{sup +}{nu}{sub e})/{Beta}(D{sub s}{sup +} {yields} K{sup +}K{sup -}{pi}{sup +}) - 0.558 {+-} 0.007 {+-} 0.016, from which they obtain the total branching fraction {Beta}(D{sub s}{sup +} {yields} {phi}e{sup +}{nu}{sub e}) = (2.61 {+-} 0.03 {+-} 0.08 {+-} 0.15) x 10{sup -2}. By comparing this value with the predicted decay rate, they extract A{sub 1}(0) = 0.607 {+-} 0.011 {+-} …

This note summarizes the results of the 'Workshop on Polarization and Beam Energy Measurements at the ILC', held at DESY (Zeuthen) April 9-11 2008. The topics for the workshop included (1) physics requirements, (2) polarized sources and low energy polarimetry, (3) BDS polarimeters, (4) BDS energy spectrometers, and (5) physics-based measurements of beam polarization and beam energy from collider data. Discussions focused on the current ILC baseline program as described in the Reference Design Report (RDR), which includes physics runs at beam energies between 100 and 250 GeV, as well as calibration runs on the Z-pole. Electron polarization of P{sub e{sup -}} {approx}> 80% and positron polarization of P{sub e{sup +}} {approx}> 30% are part of the baseline configuration of the machine. Energy and polarization measurements for ILC options beyond the baseline, including Z-pole running and the 1 TeV energy upgrade, were also discussed.

Fiducials in the form of intersecting straight lines are used to align the target in the final target chamber of the National Ignition Facility of Lawrence Livermore National Laboratory. One of the techniques used to locate these lines is the Hough transform. When two lines intersect at a 90 degree angle, it is tempting to orient the lines to horizontal and vertical directions. There are other possible angles at which the lines may be oriented. One question that arises while designing the fiducials is whether there is a preferred angle or range of angles that leads to higher accuracy. This work attempts to answer this question through detailed computer simulation.

This supporting document has been prepared to make the FDNW calculations for Project W-320 readily retrievable. The objectives of this calculation are (1) To perform static and Safety Class 2 dynamic stress analysis of the Slurry and Supernate Process (inner) piping connecting Tanks 241-C-106 and 241-AY-102 in order to be in compliance with the Code requirements; (2) To assure the thermal expansion of the process pipe not be strained by the outer encasement pipe; and (3) To furnish process pipe support to the Civil Engineering group.

This supporting document has been prepared to make the FDNW calculations for Project W-320 readily retrievable.

This document provides verification that the safety related commitments specified in HNF-SD-WM-810-001, Addendum 1 for the Waste Retrieval Sluicing System, Project W-320 and Project W-320 Safety Evaluation Report (SER), have been implemented in the project hardware, procedures and administrative controls. Four appendices include matrices which show where the 810 commitments are implemented for limiting conditions of operation and surveillance requirements controls, administrative controls, defense-in-depth controls and controls discussed in 810 Addendum 1. A fifth appendix includes the implementation of Project W-320 SER issues and provisions.