This document identifies the test requirements for the 200 Area Effluent Treatment Facility Basic Support Systems

None

This soil characterization report summarizes sampling activities and analytical results, provides copies of laboratory data reports, and meets the requirements of Section IV.G.2 of the Permit (NEV HW0021, November 2005) and Sections P.3.d.7.b and P.3.n of the Permit Application (DOE/NV--1053-VOL 4, May 2005).

The surrogate reaction 238U(3He,tf) is used to determine the 237Np(n,f) cross section indirectly over an equivalent neutron energy range from 10 to 20 MeV. A self-supporting ~;;761 mu g/cm2 metallic 238U foil was bombarded with a 42 MeV 3He2+ beam from the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory (LBNL). Outgoing charged particles and fission fragments were identified using the Silicon Telescope Array for Reaction Studies (STARS), consists of two 140 mu m and one 1000 mu m Micron S2 type silicon detectors. The 237Np(n,f) cross sections, determined indirectly, were compared with the 237Np(n,f) cross section data from direct measurements, the Evaluated Nuclear Data File (ENDF/B-VII.0), and the Japanese Evaluated Nuclear Data Library (JENDL 3.3) and found to closely follow those datasets. Use of the (3He,tf) reaction as a surrogate to extract (n,f) cross section in the 10 to 20 MeV equivalent neutron energy is found to be suitable.

Los Alamos National Laboratory (LANL) has completed experiments involving 15 each, 250- liter experimental test containers of transuranic (TRU) heterogeneous waste immersed in two types of brine similar to those found in the underground portion of the Waste Isolation Pilot Plant (WIPP). To dispose of the waste without removing the brine from the test containers, LANL added commercially available cross-linked polyacrylate granules to absorb the 190 liters of brine in each container, making the waste compliant for shipping to the WIPP in a Standard Waste Box (SWB). Prior to performing the absorption, LANL and the manufacturer of the absorbent conducted laboratory and field tests to determine the ratio of absorbent to brine that would fully absorb the liquid. Bench scale tests indicated a ratio of 10 parts Castile brine to one part absorbent and 6.25 parts Brine A to one part absorbent. The minimum ratio of absorbent to brine was sought because headspace in the containers was limited. However, full scale testing revealed that the ratio should be adjusted to be about 15% richer in absorbent. Additional testing showed that the absorbent would not apply more than 13.8 kPa pressure on the walls of the vessel and that the absorbent …

The report is about the AC Quadrupole in RHIC

The high energy (s{sup 1/2} = 500 GeV) polarized proton beam experiments performed in RHIC, require high polarization of the proton beam. With the AGS used as the pre-injector to RHIC, one of the main tasks is to preserve the polarization of the proton beam, during the beam acceleration in the AGS. The polarization preservation is accomplished by the two partial helical magnets [1,2,3,4,5,6,7] which have been installed in AGS, and help overcome the imperfection and the intrinsic spin resonances which occur during the acceleration of protons. This elimination of the intrinsic resonances is accomplished by placing the vertical tune Q{sub y} at a value close to 8.98, within the spin-tune stop-band created by the snake. At this near integer tune the perturbations caused by the partial helical magnets is large resulting in large beta and dispersion waves. To mitigate the adverse effect of the partial helices on the optics of the AGS, we have introduced compensation quads[2] in the AGS. In this paper we present the beam optics of the AGS which ameliorates this effect of the partial helices.

When Fluor Fernald took over the management of the Fernald Environmental Management Project in 1992, the estimated closure date of the site was more than 25 years into the future. Fluor Fernald, in conjunction with DOE-Fernald, introduced the Accelerated Cleanup Plan, which was designed to substantially shorten that schedule and save taxpayers more than $3 billion. The management of Fluor Fernald believes there are three fundamental concerns that must be addressed by any contractor hoping to achieve closure of a site within the DOE complex. They are relationship management, resource management and contract management. Relationship management refers to the interaction between the site and local residents, regulators, union leadership, the workforce at large, the media, and any other interested stakeholder groups. Resource management is of course related to the effective administration of the site knowledge base and the skills of the workforce, the attraction and retention of qualified a nd competent technical personnel, and the best recognition and use of appropriate new technologies. Perhaps most importantly, resource management must also include a plan for survival in a flat-funding environment. Lastly, creative and disciplined contract management will be essential to effecting the closure of any DOE site. Fluor Fernald, together with …

The activation energy of a high melting temperature sol-gel (SG) derived tantalum-tungsten oxide thermite composite was determined using the Kissinger isoconversion method. The SG derived powder was consolidated using the High Pressure Spark Plasma Sintering (HPSPS) technique to 300 and 400 C to produce pellets with dimensions of 5 mm diameter by 1.5 mm height. A custom built ignition setup was developed to measure ignition temperatures at high heating rates (500-2000 C {center_dot} min{sup -1}). Such heating rates were required in order to ignite the thermite composite. Unlike the 400 C samples, results show that the samples consolidated to 300 C undergo an abrupt change in temperature response prior to ignition. This change in temperature response has been attributed to the crystallization of the amorphous WO{sub 3} in the SG derived Ta-WO{sub 3} thermite composite and not to a pre-ignition reaction between the constituents. Ignition temperatures for the Ta-WO{sub 3} thermite ranged from approximately 465-670 C. The activation energy of the SG derived Ta-WO{sup 3} thermite composite consolidated to 300 and 400 C were determined to be 37.787 {+-} 1.58 kJ {center_dot} mol{sup -1} and 57.381 {+-} 2.26 kJ {center_dot} mol{sup -1}, respectively.

As the United States plays a greater role in the 21st Century as global peacekeeper and international defender of human rights and democratic principles, there is an increasing likelihood that it will become the focus of acts of terrorism. Such acts of terrorism--sometimes described as ''asymmetric''--could involve the threat or use of weapons of mass destruction (WMD), particularly those considered unconventional, which include ones designed to release chemical or biological agents. In fact, biological agents are of great concern because, as noted by D.A. Henderson of the Center for Civilian Biodefense Studies at Johns Hopkins University in Baltimore, MD, ''... with shortages of hospital space, vaccines, antibiotics, there would be chaos.'' (Williams, 2000). Unfortunately, potential aggressor nations, terrorist groups, and even individuals, can, for a modest cost and effort, develop covert capabilities for manufacturing, transporting, and offensively using biological weapons of mass destruction. Furthermore, there is evidence to indicate that terrorist increasingly are targeting civilian populations--in order to inflict indiscriminate casualties--as well as other more traditional targets such as symbolic buildings or organizations (see Tucker, 1999), which suggest that introducing rapid treatment after a biological event may be more practical than concentrating on prevention (see Siegrist, 1999), especially because sensors …

We present here computer modeling efforts to describe the time-dependent pressurization and gas-phase mole fractions inside sealed canisters containing actinide materials packaged with small (0.12 - 0.5 wt. %) amounts of water. The model is run using Chemkin software, and the chemical reaction mechanism includes gas generation due to radiolysis of adsorbed water, interfacial chemical reactions, and adsorption/desorption kinetics of water on PuO2 materials. The ultimate goal is to provide a verifiable computer model that can be used to predict problematic gas generation in storage forms and assure design criteria for short-term storage and transportation of less than well-characterized (with respect to gas generation) material classes. Our initial efforts are intended to assess pressurization and gas-phase mole fractions using well-defined 3013 container test cases. We have modeled gas generation on PuO2 with water loading up to 0.5 wt. %, at 300 and 525 K, for time frames of 3 years. Estimates of the initial H2 generation rates were determined using RadCalc and employed in the Chemkin model to assess time- and coverage-dependent system behavior. Results indicate that canister pressurization due to radiolysis is a relatively slow process, with pressure increases at 300 K of approximately 1.5 atm. for 5000 g …

This report discusses the topic of periodic cruise trajectories for hypersonic flight. An extensive review of previous work associated with periodic cruise trajectories for subsonic, supersonic and hypersonic flight is presented to provide the background for this investigation. The primary objective of this report is to discuss why periodic cruise trajectories lead to near fuel-optimal trajectories from a heuristic, mathematical and computational perspective with air breathing propulsion. Results to date indicate that periodic achieves greater fuel savings by exchanging kinetic and potential energy more efficiently. The vehicle attempts to chatter back and forth between where the vehicle wants to fly for optimum aerodynamic and propulsive performance. Results from computational simulations are inconclusive and require further work to define appropriate interfaces for aerodynamic and propulsion data decks for input into the POST software. The notional design of a vehicle to fly periodic hypersonic cruise trajectories was improved by including concepts for engine installation, flight controls and by including considerations for off-design performance. This notional design provides a better starting point for more serious and complete vehicle design studies.

The idea of using multiple partial helical magnets was applied successfully to the AGS synchrotron, to preserve the proton beam polarization. In this paper we explore in details the idea of using four helical magnets placed symmetrically in the AGS ring. This modification provides many advantages over the present setup of the AGS that uses two partial helical magnets. First, it provides a larger 'spin tune gap' for the placement of the vertical betatron tune of the AGS during acceleration, second, the vertical spin direction during the beam injection and extraction is closer to vertical, third, the symmetric placement of the snakes allows for a better control of the AGS optics, and for reduced values of the beta and eta functions, especially near injection, fourth, the optical properties of the helical magnets also favor the placement of the horizontal betatron tune in the 'spin tune gap', thus eliminating the horizontal spin resonances. In this paper we provide results on the spin tune and on the optics of the AGS with four partial helical magnets, and we compare these results with the present setup of the AGS that uses two partial helical magnets.

The Cerro Grande forest fire in May of 2000 and the terrorist events of September 11, 2001 precipitated concerns of the vulnerability of legacy contact-handled (CH), high-wattage transuranic (TRU) waste stored at Los Alamos National Laboratory (LANL). An analysis of the 9,100 cubic meters of stored CH-TRU waste revealed that 400 cubic meters or 4.5% of the inventory represented 61% of the risk. The analysis further showed that this 400 cubic meters was contained in only 2,000 drums. These facts and the question ''How can the disposition of this waste to the Waste Isolation Pilot Plant (WIPP) be accelerated?'' formed the genesis of LANL's Quick to WIPP initiative.

The DOE/National Nuclear Security Administration's (NNSA) ''Sister Laboratory'' program allows for bilateral technical cooperation in peaceful uses of nuclear energy for developing nations. The program establishes a direct line of communication between U.S. scientists and the nuclear research and scientific communities in participating countries.

High temperature creep in structures at the interface between the nuclear plant and the hydrogen plant and the migration of tritium from the core through structures in the interface are two key challenges for the Very High Temperature Reactor (VHTR) coupled to the High Temperature Electrolysis (HTE) process. The severity of these challenges, however, can be reduced by lowering the temperature at which the interface operates. Preferably this should be accomplished in a way that does not reduce combined plant efficiency and other performance measures. A means for doing so is described in this report. A heat pump is used to raise the temperature of near-waste heat from the PCU to the temperature at which nine-tenths of the HTE process heat is needed. In addition to mitigating tritium transport and creep of structures, structural material commodity costs are reduced and plant efficiency is increased by a couple of percent.

None

Some calculations have been made to estimate the characteristics of a neutron-burst type fast reactor similar to Godiva but made up of relatively small component parts--the so-called "layered assembly." One spherical and three cylindrical assemblies have been considered. Critical masses, assuming 5% voids, range from 58 to 65 kg of 93.4% enriched U/sup 235/. For a reactivity addition of 0.33 dollars above prompt criticals bursts between 2 x 10/sup 17/ and 6.7 x 10/ sup 17/ fissions were computed with accompanying temperature rises varying from 514 to 1600 deg C. The burst width at half-maximum was about 12 microseconds. To obtain an idea of the possibilities of stress reduction which might be achieved by layerings an assembly made of small rings was considered. While the critical masses obtained here are believed to be fairly accurates the predictions concerning mechanical energy generated, total fissions, and burst width may be subject to sizeable error due to the many simplitications required to allow hand computations. Neverthelesss considerable improvement in safety and burst-size is indicated by the use of a "layered assembly" instead of an assembly composed of relatively thick parts. (auth)

Synchrotron measurements of near-threshold and broad-range (80 to 1000 eV) absolute photoabsorption cross sections were taken at Brookhaven using the plane grating monochromator at the VuV storage ring beam line U14A of the NSLS facility. Transmission data for well characterized multilayer foils of C, Ti, Cr, Ni, Cu, Th and U provided absolute cross sections with 10% overall uncertainties and better than 2 eV resolution.

Various transport systems have been studied for the transportation of waste packages and buffer materials from the ground surface to the underground radioactive waste disposal facility, such as a lift (vertical shaft type) and a vehicle (inclined tunnel type)(1). This paper introduces pneumatic capsule pipeline system as a new method for the transportation. The system is designed to transport pneumatically waste packages and buffer materials between the surface and the underground as shown in Fig. 1. The system is also used to transport excavated debris, equipment and materials during construction. It is economical to utilize the system for air ventilation in addition to be used for transportation. The capsule moving in the shaft can be controlled at appropriate speed by adjusting the air pressure in the shaft. This paper discusses the applicability of the system to the geological disposal based on analytical simulation and experimental study.

Siempelkamp Nukleartechnik GmbH is engaged in the optimization of decommissioning processes for several years. With respect of the complexity of the projects, the time frame and the budget it is necessary to find more effective ways to handle those tasks in the near future. The decommissioning and dismantling will be achieved in six steps taking into account that some processing equipment can be dismantled before and the rest only after the High Active Liquid Waste Concentrate (HAWC) has been vitrified approximately by mid of 2005. After the successful beginning of the remote dismantling of the main process cells from March 2000, the next remote dismantling project at the WAK was initiated April 2000.

Work funded by the subject LDRD proposal has produced the following results. First, a comprehensive catalog of EUV lines from M-shell iron (Fe IX-XVI) in the 60-140 {angstrom} waveband. Second, a revised estimate of the radiative cooling of high-temperature plasmas by Fe, which dominates the cooling in cosmic-abundance plasmas from 4 x 10{sup 5}K to 1 x 10{sup 7}K. Third, laboratory data to correct theoretical atomic models and develop reliable spectral models of M-shell Fe in the EUV. Fourth, a solution of the origin of the quasi-continuum in EUV spectra of late-type stars, which has been variously ascribed to a high-temperature tail on the emission measure distribution of stellar coronae, reduced metal abundances, resonant scattering (destruction) of emission lines, and incompleteness of atomic models.

The U.S. Department of Energy (DOE), National Nuclear Security Administration of the Nevada Operations Office (NNSA/NV) operates and maintains two active facilities on the Nevada Test Site (NTS) that dispose defense-generated low-level radioactive waste (LLW), mixed radioactive waste, and ''classified waste'' in shallow trenches and pits. The operation and maintenance of the LLW disposal sites are self-regulated by the DOE under DOE Order 435.1. This Order requires formal review of a performance assessment (PA) and composite analysis (CA; assessment of all interacting radiological sources) for each LLW disposal system followed by an active maintenance program that extends through and beyond the site closure program. The Nevada disposal facilities continue to receive NTS-generated LLW and defense-generated LLW from across the DOE complex. The PA/CAs for the sites have been conditionally approved and the facilities are now under a formal maintenance program that requires testing of conceptual models, quantifying and attempting to reduce uncertainty, and implementing confirmatory and long-term background monitoring, all leading to eventual closure of the disposal sites. To streamline and reduce the cost of the maintenance program, the NNSA/NV is converting the deterministic PA/CAs to probabilistic models using GoldSim, a probabilistic simulation computer code. The output of probabilistic models …

As various issues make the continued usage of high-level waste storage tanks attractive, there is an increasing need to sharpen the assessment of their structural integrity. One aspect of a structural integrity program, nondestructive evaluation, is the focus of this paper. In September 2000, a program to support the sites was initiated jointly by Tanks Focus Area and Characterization, Monitoring, and Sensor Technologies Crosscutting Program of the Office of Environmental Management, Department of Energy (DOE). The vehicle was the Center for Nondestructive Evaluation, one of the National Science Foundation's Industry/University Cooperative Research Centers that is operated in close collaboration with the Ames Laboratory, USDOE. The support activities that have been provided by the center will be reviewed. Included are the organization of a series of annual workshops to allow the sites to share experiences and develop coordinated approaches to common problems, the development of an electronic source of relevant information, and assistance of the sites on particular technical problems. Directions and early results on some of these technical assistance projects are emphasized. Included are the discussion of theoretical analysis of ultrasonic wave propagation in curved plates to support the interpretation of tandem synthetic aperture focusing data to detect flaws in …