We present the results of a series of experiments to measure the thermal recovery times of a flashlamp-pumped, Nd:Glass multi-segment laser amplifier. In particular, we investigated the thermal recovery times under the following cooling options: (1) passive cooling; (2) active cooling of the flashlamp cassettes, and (3) active cooling of the flashlamp cassettes and gas flow in the pump cavity.

We are investigating the characteristics of extremely low frequency (ELF) electromagnetic pulse (EMW) phenomena from underground nuclear and chemical explosions and from surface chemical explosions as they may be applied in an On-Site Inspection (OSI) context under a Comprehensive Test-Ban Treaty (CTBT). The principal application of these phenomena is for discrimination among underground chemical explosions, underground nuclear explosions, and earthquakes. Underground chemical and nuclear explosions both generate low-frequency EMP signals (about 1 Hz) that are observable within several kilometers of ground zero. During this fiscal year we have been gathering data from explosions of opportunity to see if ELF EMP signals are observable from large ripple-fired blasts and from smaller dedicated explosions such as those occurring at the NTS. In addition, we are continuing to review data from the Henderson Mine deployment that took place during FY94 and data from previous underground nuclear tests including Hunter`s Trophy and past underground nuclear tests have been analyzed and we here make estimates of the properties of the EMP ftom underground nuclear ard chemical explosions, including detectability, dependence on yield, and dependence on distance from the source. Data from the Henderson Mine provide information about detection of EMP from typical moderate size underground …

A silicon microgripper with a large gripping force, a relatively rigid structural body, and flexibility in functional design is presented. The actuation is generated by Ni-Ti-Cu shape memory alloy (SMA) films and the stress induced can deflect each side of the microgripper up to 55 {mu}m for a total gripping motion of 110 {mu}m. When fully open, the force exerted by the film corresponds to a 40 mN gripping force on the tip of the gripper.

The purpose of this fixture is to provide a general purpose tool that is simple to construct, simple to use, and flexible enough to adapt to different Tile-Cal Hadron Calorimeter submodule heights and configurations. It is also adaptable for modules that are shorter in radius, if two different lengths are necessary to accommodate the support of the liquid argon cryostat. With minor changes, this fixture can also be used to stack the proposed modules for the ``Crack Filler``. It is expected that minor modifications may be necessary to adapt this fixture to different facilities and working conditions. It is not presumed that this procedure will be satisfactory for every institution that will use it, and suggestions for changes to this procedure will be accepted as constructive and useful information.

Tests have been carried out on a string prototype superconducting magnets, consisting of one double-quadrupole and two double-dipoles forming the major part of a half-cell of the LHC machine. The magnets are protected individually by ``cold diodes`` and quench heaters. The electrical aspects of these tests are described here. The performance during quench of the protection diodes and the associated interconnections was studied. Tests determined the magnet quench performance in training and at different ramp-rates, and investigated the inter-magnet propagation of quenches. Current lead and inter-magnet contact resistances were controlled and the performance of the power converter and the dump switches assessed.

This Stabilization Blend Plan documents the material to be processed and the processing order for the FY95 Ash Stabilization Campaign. The primary mission of this process is to reduce the inventory of unstable plutonium bearing ash. The source of the ash is from Rocky Flats and the 232-Z incinerator at the Plutonium Finishing Plant (PFP). The ash is currently being stored in Room 235B and Vault 174 in building 234-5Z. The sludge is to be thermally stabilized in a glovebox in room 230A of the 234-5Z building and material handling for the process will be done in room 230B of the same building. The campaign is scheduled for approximately 12--16 weeks. A total of roughly 4 kg of Pu will be processed.

The purpose of this guide is to describe the documents and record series at the K-25 plant that pertain to the handling of waste containing cesium-137 produced as a result of processes to enrich uranium and separate plutonium at the Department of Energy`s (DOE) Oak Ridge National Laboratory (ORNL) and Oak Ride Gaseous Diffusion Plant (ORGDP, called K-25) in Oak Ridge, Tennessee. History Associates Incorporated (HAI) prepared this guide as part of DOE`s Epidemiologic Records Inventory Project, the purpose of which is to verify and conduct inventories of epidemiologic and health-related records at various DOE and DOE contractor sites. This introduction briefly describes the Epidemiologic Records Inventory Project and HAI`s role in it. Specific attention is given to the history of the DOE-Oak Ridge Reservation, the history and development of the K-25 plant, the creation and handling of cesium-contaminated waste, and environmental monitoring efforts at ORNL and K-25 from the late 1940s to the present. This introduction also presents the methodology used to identify the documents and series pertaining to cesium, a discussion of the inventory of these documents, information concerning access to the site and the records, and a description of the arrangement of the chapters.

The SAR energy-aperture product limit is extended to multi-beam SARS, Spotlight and moving spotlight SARS. This fundamental limit bounds the tradeoff between energy and antenna size. The kinematic relations between design variables such as platform speed, pulse repetition frequency, beam width and area rate are analyzed in a unified framework applicable to a wide variety of SARs including strip maps, spotlights, vermer arrays and multi-beam SARS, both scanning and swept-beam. Then the energy-aperture product limit is derived from the signal-to noise requirement and the kinematic constraints. The derivation clarifies impact of multiple beams and spotlighting on SAR performance.

This document is a plan which serves as the contractual agreement between the Characterization Program, Sampling Operations, and WHC 222-S Laboratory. The scope of this plan is to provide guidance for the sampling and analysis of samples for tank 241-U-202.

The Oklahoma Geological Survey and the University of Oklahoma are engaged in a five-year program to identify and address Oklahoma`s oil recovery opportunities in fluvial-dominated deltaic (FDD) reservoirs. This program includes the systematic and comprehensive collection, evaluation, and distribution of information on all of Oklahoma`s FDD oil reservoirs and the recovery technologies that can be applied to those reservoirs with commercial success. To date, the lead geologists have defined the initial geographic extents of Oklahoma`s FDD plays, and compiled known information about those plays. Nine plays have been defined, all of them Pennsylvanian in age and most from the Cherokee Group. A bibliographic database has been developed to record the literature sources and their related plays. Trend maps are being developed to identify the FDD portions of the relevant reservoirs, through accessing current production databases and through compiling the literature results. A reservoir database system also has been developed, to record specific reservoir data elements that are identified through the literature, and through public and private data sources. The project team is working with the Oklahoma Nomenclature Committee of the Mid-Continent Oil and Gas Association to update oil field boundary definitions in the project area. Also, team members are working …

The Winter Fuels Report is intended to provide concise, timely information to the industry, the press, policymakers, consumers, analysts, and State and local governments on the following topics: distillate fuel oil net production, imports and stocks on a US level and for all Petroleum Administration for Defense Districts (PADD) and product supplied on a US level; propane net production, imports and stocks on a US level and for PADD`s 1, 2, and 3; natural gas supply and disposition and underground storage for the US and consumption for all PADD`s; as well as selected National average prices; residential and wholesale pricing data for heating oil and propane for those States participating in the joint Energy Information Administration (EIA)/State Heating Oil and Propane Program; crude oil and petroleum price comparisons for the US and selected cities; and a 6--10 Day and 30-Day outlook for temperature and precipitation and US total heating degree-days by city. 36 figs., 13 tabs.

The conceptual design of the National Ignition Facility (NIF) 192 beam laser incorporates a low-power alignment beam injected in the pinhole plane of the final spatial filter with a wave length intermediate between the 1053 mn laser output and the 351 mn frequency-converted beam that illuminates the target Choosing the specific wavelength for which the spatial filter plane is reimaged in the same target chamber plane as the frequency-converted main laser pulse, achieves optimum accuracy without the need for additional means to insure precise overlap between the two beams. Insertion of the alignment beam after the last laser amplifier also allows alignment to the target while the amplifiers are still cooling from a previous shot.