An access system based on the one now in operation at the CERN ISR is recommended. Access doors would presumably be located at the entrances to the utility tunnels connecting the support buildings with the ring. Persons requesting access would insert an identity card into a scanner to activate the system. The request would be autologged, the keybank adjacent to the door would be unlocked and ISABELLE operations would be notified. The operator would then select the door, activating a TV-audio link. The person requesting entry would draw a key from the bank, show it and his film badge to the operator who would enable the door release.

The composition of a thorium metal surface has been monitored using Auger electron spectroscopy following Ar/sup +/ bombardment at different temperatures. After extended Ar/sup +/ bombardment, enough contaminated overlayers were removed to expose a surface region containing only thorium, bulk impurities, and imbedded argon. The main impurities, carbon and oxygen, differed in their behavior when the sample was annealed following bombardment. The amount of surface carbon either increased or remained constant during annealing depending upon the temperature of the sample during bombardment. The amount of surface oxygen decreased rapidly when the sample was heated above 500/sup 0/C regardless of the sample temperature during bombardment. These experiments indicate that preparation of clean, annealed thorium surfaces requires ion bombardment at temperatures > or = 400/sup 0/C.

The Data Director editor is a powerful, multiuser editor that will aid in the development and modification of APT part programs, assembly-language programs, and other text. Some benefits of the editor are as follows: most of the editor is reentrant, allowing several users to share it; the user can use the editor as though the entire file being edited is in memory; editing takes place on a working file so that changes are not made to the original file until desired; the editor offers a powerful command set where most commands have the same syntax. 1 table.

This is the appendix to the Stearns-Roger Engineering Company conceptual design report on ERDA's Large Scale Experiment No. 2 (LSE No. 2). The object of this LSE is to design, construct, test, evaluate and operate a STES for the purpose of obtaining experience with large scale hardware systems and to establish engineering capability for subsequent demonstration projects. This particular LSE is to be located at Shenandoah, Georgia, and will provide power to the Bleyle knitwear factory. Under this contract Stearns-Roger developed a conceptual design, which was site specific, containing the following major elements: System Requirements Analysis, Site Description, System Conceptual Design, Conceptual Test and Operating Plans, Development Plans, Procurement and Management Plans for Subsequent Phases, and Cost Estimates. The Solar Total Energy system is sized to supply 1.720 MW thermal power and 383.6 KW electrical power. The STES is sized for the extended knitwear plant of 3902 M/sup 2/ (42,000 sq-ft) which will eventually employ 300 people. Drawings, tables, and data sheets are included on hourly temperatures, displacement, utility rates, power conversion system, seasonal design load summary, average collector temperature optimization study, system operating temperature optimization study, power conversion system seasonal performance, thermal storage/fluid loop, system integration, and cost estimates. …

The Stearns-Roger Engineering Company conceptual design of ERDA's Large Scale Experiment No. 2 (LSE No. 2) is presented. The various LSEs are part of ERDA's Solar Total Energy Program (STES) and a separate activity of the National Solar Thermal Power Systems Program. The object of this LSE is to design, construct, test, evaluate and operate a STES for the purpose of obtaining experience with large scale hardware systems and to establish engineering capability for subsequent demonstration projects. This particular LSE is to be located at Shenandoah, Georgia, and will provide power to the Bleyle knitwear factory. The Solar Total Energy system is sized to supply 1.720 MW thermal power and 383.6 KW electrical power. The STES is sized for the extended knitwear plant of 3902 M/sup 2/ (42,000 sq-ft) which will eventually employ 300 people. The details of studies conducted for Phase II of the Solar Total Energy System (STES) for the conceptual design requirements of the facility are presented. Included in this section are the detailed descriptions and analyses of the following subtasks: facility concept design, system concept design, performance analysis, operation plan, component and subsystem development, procurement plan, cost estimating and scheduling, and technical and management plans. (WHK)

The target chamber of a laser fusion reactor will contain small amounts of background gases. As the beam is focused, it ionizes the gas and Raman scattering is induced. Density limits on the background gas are found in order that the laser beam will not become appreciably decollimated. It is found that laser bandwidth efficiently decreases the scattering effect.

Methodology in use in the Imperial Valley for assessing the potential impact on air quality that may result from the development of geothermal resources is discussed. The installation of a network of air quality stations for characterizing the air quality and atmospheric transport properties in the valley prior to development is discussed. Analyses of geothermal fluids for various gases are performed to evaluate the potential emission rates from future geothermal power plants. The principal pollutant of concern is H/sub 2/S because of its noxious odor and potential release rate. These estimated source emission rates and the appropriate meteorological measurements are used as input to a three-dimensional, atmospheric transport code to estimate the potential changes in air quality that result from various scenarios for development of geothermal power.

The Stearns-Roger Engineering Company conceptual design of ERDA's Large Scale Experiment No. 2 (LSE No. 2) is described. The various LSE's are part of ERDA's Solar Total Energy Program (STES) and a separate activity of the National Solar Thermal Power Systems Program. The object of this LSE is to design, construct, test, evaluate and operate a STES for the purpose of obtaining experience with large scale hardware systems and to establish engineering capability for subsequent demonstration projects. This particular LSE is to be located at Shenandoah, Georgia and will provide power to the Bleyle knitwear factory. The Solar Total Energy system is sized to supply 1.720 MW thermal power (both space heating and process heat) and 383.6 KW electrical power. The STES is sized for the extended knitwear plant of 3902 M/sup 2/ (42,000 sq-ft) which will eventually employ 300 people. The section on conclusions and recommendations described the baseline design recommendation, facility requirements, the solar system, power conversion system, schedules and cost, and additional candidate systems. The systems requirements analysis includes detailed descriptions and analyses of the following subtasks: load analysis, energy displacement, local laws and ordinances, life cycle cost, health and safety, environmental assessment, reliability assessment, and utility …

The injector system for the Tandem Mirror Experiment (TMX) contains the components required to create and maintain a high-temperature, high-density plasma. These components include a streaming-plasma gun in each of the plug tanks to form the target-plasma, 24 neutral-beam source modules for injecting neutral deuterium atoms to heat and replace losses from the plasma, and a gas box system that applies a streaming cold gas to the plasma to stabilize it. This paper discusses the mechanical design problems and solutions for this injector system.

Evaluation procedures used to produce sets of evaluated data for the 33 heavy isotopes that fall in the range Z = 90 to Z = 98 are described. At the beginning of the discussion for each individual isotope, a computer-generated listing is given which summarizes the main properties of the data sets that are contained in the evaluation. (RWR)

Liquid-nitrogen-cooled liners have been installed in the neutral-beam source tanks of 2XIIB. The installation has resulted in improvements in vacuum pumping, although testing is not complete. The liners are stainless-steel-flooded-type liners, using spot-welded-and-inflation construction. The natural-convection flow system must keep the liners cold during the high heat loads imposed during Ti gettering.

In the past few months, detailed experimental data have become available on laser light absorption versus angle, plasma density profiles near the critical surface, and stimulated scattering processes. In the light of these experiments, it seems timely to reassess our theoretical understanding of these phenomena. A quantitative comparison of the data with current results of plasma simulations and theory is presented and the areas where further theoretical effort is called for are pointed out. Three recent experiments done at Livermore are compared with the latest theoretical and simulation results on laser-plasma interactions. The analysis covers the following areas: (1) theory of resonance absorption on a rippled critical surface, compared with an experiment on the angle and polarization dependence of absorption; (2) theory of density profile steepening, compared with holographic interferometry measurements; and (3) theory of stimulated Brillouin scattering in long density gradients, compared with reflectivity measurements for long pulse, large focal spot experiments.

Presently the US imports a large proportion of its petroleum requirements. This dependence on foreign petroleum has had a major impact on our economy. As a result, the Federal government is sponsoring programs to offset this foreign reliance by conservation of oil and gas, conversion of petroleum using facilities to coal and nuclear energy and the development of alternate sources of energy. One of the most acceptable alternate resources is geothermal. It offers an environmentally sound energy resource, can be developed at reasonable cost in comparison to other forms of energy and has a long term production capacity. On September 3, 1974, the Geothermal Energy Research Development and Demonstration Act was enacted to further the research, development and demonstration of geothermal energy technologies. This Act also established the Geothermal Loan Guaranty Program to assist in the financing of geothermal resource development, both electrical and non-electrical. The highlights of that Guaranty Program are detailed in this report.

A preliminary model of photosynthesis and growth of field crops was developed to assess the effects of gaseous pollutants, particularly airborne sulfur compounds, resulting from energy production from geothermal resources. The model simulates photosynthesis as a function of such variables as irradiance, CO/sub 2/ diffusion resistances, and internal biochemical processes. The model allocates the products of photosynthesis to structural (leaf, stem, root, and fruit) and storage compartments of the plant. The simulations encompass the entire growing season from germination to senescence. The model is described conceptually and mathematically and examples of model output are provided for various levels of pollutant stress. Also, future developments that would improve this preliminary model are outlined and its applications are discussed.

The conclusions and recommendations resulting from an examination of energy use in the marine transportation industry are presented. Four tasks covered in the study include an industry summary, regulations and tariffs, efficiency improvements, and the future of the industry. The methodology used in the study is described. Specific recommendations are made concerning research and development actions that appear to offer the greatest conservation potential. Three high risk areas are identified that should be reevaluated in the future. (MCW)

The conclusions and recommendations resulting from an examination of energy use in the marine transportation industry are presented. The methodology used is discussed. Specific information is discussed concerning energy consumption and productivity in these sectors: foreign trade; Great Lakes; inland waterways; coastal; offshore; pleasure craft; and fishing and miscellaneous. Based on the energy savings potentials calculated, the programs relating to slow speed diesels, diesel bottoming cycles, and hull maintenance and smoothing are recommended for funding in FY1978. Three high risk program areas that should be evaluated in the future are identified as: adiabatic diesels, Naval Academy heat balance engine, and closed cycle gas turbines. (MCW)

The application of a solar energy system to the Lawrence, Kansas alfalfa dehydration plant, owned by the Western Alfalfa Corporation, is an attractive opportunity to demonstrate the feasibility of using solar energy to supply industrial process heat. The work undertaken for this project is reviewed. The design parameters of the dehydrator, including the energy consumed by the plant, the airflow requirements of the dehydrator, and the interface between the dehydrator and the solar array are discussed. The design of the collector array, the selection of solar collectors, the calculation of collector areas for the array, and the simulations of the system performance are addressed. Discussions of the detailed engineering drawings and specifications of the array construction, duct work, air handling equipment, system controls, and data monitoring, and acquisition systems are presented. The results of the contractors' bids based on these drawings and specifications are given. An economic analysis of the solar system using the Lawrence Livermore Laboratory format is presented. Finally, the impact of the solar system on the process energy requirements and on the operation of the plant are discussed. (WHK)

The commercial aspects of laser fusion were evaluated in an attempt to relate the end products (neutrons and energy) to significant commercial applications. It was found that by far the largest markets and highest payoffs for laser fusion are associated with electric power production. Hence, much of this report evaluates the prospects of producing commercial electricity with laser fusion. To this end, we have described in detail a new and promising laser fusion concept--the liquid lithium waterfall reactor. In addition, we have taken the most attractive features from our laser studies and used them to compare laser fusion to other long-range sources of energy (breeder reactors and solar energy). It is our contention that all three sources of electrical energy should be developed to the point where the final selections are primarily based on economic competitiveness. The other potential applications of laser fusion (fissile fuel production, synthetic fuel production, actinide burning, and propulsion) are also discussed, and our preliminary plan for the engineering development of laser fusion is presented.

Two plutonium-alloy hemispheres were cast, machined, and canned for use in pulsed-sphere experiments. LLL physicists will use the data from these experiments to improve physics codes. The total mass of Pu--1.0 wt percent Ga was 9.3 kg. The hemispherical shapes had a radius of 53.7 mm. Both hemispheres were cast with hollow polar cones. In one casting the cone was plugged; in the other casting the cone was left to allow fitting to the neutron generator. The hemispheres were electron beam welded into close-fitting stainless steel cans so they could be used in a non-plutonium area. This report describes the fabrication of the device, which is expected to have long-term research utility. 14 figures.

Computations have been made of the parameters of a neutral-beam driven, field-reversed mirror reactor as a function of beam injection energy. Q values of 4 to 5 and a fusion power of 10 to 50 MW per cell are found at beam energies of 200 to 500 keV. Cost estimates indicate a direct capital cost of less than $1000/kW/sub e/ for multicell versions of the reactor.

This manual provides rough guidelines to aid a programer in installing ADBMS at a computer installation. ADBMS is a set of subroutines which together form a nucleus of a CODASYL-based data base management system. The use of this system is explained in detail in ''ADBMS Users Guide'' by E.W. Berss, Lawrence Livermore Laboratory, Feb. 1977.

The status of a program to determine the feasibility of a lithium--air battery (or an analog) as an automotive power source is summarized. Anticipated performance of characteristics (including efficiency and voltage) of the battery and the lithium recycling process are described. A calcium/aqueous-electrolyte combination was discovered which shows electrode behavior similar to that of Li. 2 figures, 2 tables.

Estimates of maximum acceptable temperatures of waste and containers during retrievable geologic storage were needed for use in evaluating and comparing conceptual designs for repositories for wastes from reprocessing and for spent fuel in several different rock types. Estimates of these temperatures and discussions of the bases for the estimates are presented.

A study of the reaction of plutonium with a commercial bone char indicates that this bone char has a high capacity for removing plutonium from aqueous wastes. The adsorption of plutonium by bone char is pH dependent, and for plutonium(IV) polymer appears to be maximized near pH 7.3 for plutonium concentrations typical of some waste streams. Adsorption is affected by dissolved salts, especially calcium and phosphate salts. Freundlich isotherms representing the adsorption of uranium and plutonium have been prepared. The low potential imposed upon aqueous solutions by commercial bone char is adequate for reduction of hexavalent plutonium to a lower plutonium oxidation state.