Many tools that target parallel and distributed environments must co-locate a set of daemons with the distributed processes of the target application. However, efficient and portable deployment of these daemons on large scale systems is an unsolved problem. We overcome this gap with LaunchMON, a scalable, robust, portable, secure, and general purpose infrastructure for launching tool daemons. Its API allows tool builders to identify all processes of a target job, launch daemons on the relevant nodes and control daemon interaction. Our results show that Launch-MON scales to very large daemon counts and substantially enhances performance over existing ad hoc mechanisms.

The National Ignition Facility (NIF) Neutron Time of Flight (NTOF) diagnostic will measure neutron yield and ion temperature in all NIF campaigns in DD, DT, and THD* implosions. The NIF NTOF diagnostic is designed to measure neutron yield from 109 to 2 x 1019. The NTOF consists of several detectors of varying sensitivity located on the NIF at about 5 m and 20 m from the target. Production, testing, and calibration of the NIF NTOF detectors have begun at the Laboratory for Laser Energetics (LLE). Operational tests of the NTOF detectors were performed on several facilities including the OMEGA laser at LLE and the Titan laser at Lawrence Livermore National Laboratory (LLNL). Neutron calibrations were carried out on the OMEGA laser. Results of the NTOF detectors tests and calibration will be presented. *(D = deuterium, T = tritium, H = hydrogen)

The United States (U.S.) has identified 61.5 metric tons (MT) of plutonium that is permanently excess to use in nuclear weapons programs, including 47.2 MT of weapons-grade plutonium. Except for materials that remain in use for programs outside of national defense, including programs for nuclear-energy development, the surplus inventories will be stored safely by the Department of Energy (DOE) and then transferred to facilities that will prepare the plutonium for permanent disposition. Some items will be disposed as transuranic waste, low-level waste, or spent fuel. The remaining surplus plutonium will be managed through: (1) the Mixed Oxide (MOX) Fuel Fabrication Facility (FFF), to be constructed at the Savannah River Site (SRS), where the plutonium will be converted to fuel that will be irradiated in civilian power reactors and later disposed to a high-level waste (HLW) repository as spent fuel; (2) the SRS H-Area facilities, by dissolving and transfer to HLW systems, also for disposal to the repository; or (3) alternative immobilization techniques that would provide durable and secure disposal. From the beginning of the U.S. program for surplus plutonium disposition, DOE has sponsored research to characterize the surplus materials and to judge their suitability for planned disposition options. Because many …

The electronic contribution to friction at semiconductor surfaces was investigated by using a Pt-coated tip with 50nm radius in an atomic force microscope sliding against an n-type GaAs(100) substrate. The GaAs surface was covered by an approximately 1 nm thick oxide layer. Charge accumulation or depletion was induced by the application of forward or reverse bias voltages. We observed a substantial increase in friction force in accumulation (forward bias) with respect to depletion (reverse bias). We propose a model based on the force exerted by the trapped charges that quantitatively explains the experimental observations of excess friction.

X-ray magnetic circular dichroism (XMCD) is utilized to explore the temperature dependence of the interface moments in Co{sub 2}MnSi (CMS) thin films capped with aluminium. By increasing the thickness of the capping layer we demonstrate enhanced interface sensitivity of the measurements and the existence of a thin Mn oxide layer at the CMS/Al interface even when a thick capping layer is used. We show that for well ordered L2{sub 1} CMS films there is no significant variation in either the Co or Mn interface moments as a function of temperature. However, a dramatic reduction in the interface moments at low temperature is observed in a disordered CMS film that is likely to be caused by increased Mn-Mn antiferromagnetic coupling. It is suggested that for ordered L2{sub 1} CMS films the temperature dependence of the tunneling magnetoresistance is not related to changes in the interface moments. However, the existence of residual Mn oxide at the CMS/barrier interface could be a contributing factor.

Using 226 million B{bar B} events recorded on the {Upsilon}(4S) resonance with the BABAR detector at the SLAC e{sup +}e{sup -} PEP-II storage rings, they reconstruct B{sup -} {yields} D*{sup 0}e{sup -}{bar {nu}}{sub e} decays using the decay chain D*{sup 0} {yields} D{sup 0}{pi}{sup 0} and D{sup 0} {yields} K{sup -} {pi}{sup +}. From the dependence of their differential rate on the w, the dot product of the four-velocities of B{sup -} and D*{sup 0}, and using the form factor description by Caprini et al. with the parameters F(1) and {rho}{sub 1{sub 1}}{sup 2}, they obtain the results {rho}{sub A{sub 1}}{sup 2} = 1.16 {+-} 0.06 {+-} 0.08, F(1) {center_dot} |V{sub cb}| = (35.9 {+-} 0.6 {+-} 1.4) {center_dot} 10{sup -3}, and {beta}(B{sup -} {yields} D*{sup 0} e{sup -}{bar {nu}}{sub e}) = (5.56 {+-} 0.08 {+-} 0.41)%.

The authors present branching fraction measurements for the radiative decays B{sup +} {yields} {rho}{sup +}{gamma}, B{sup 0} {yields} {rho}{sup 0}{gamma}, and B{sup 0} {yields} {omega}{gamma}. The analysis is based on a data sample of 465 million B{bar B} events collected with the BABAR detector at the PEP-II asymmetric-energy B Factory located at the Stanford Linear Accelerator Center (SLAC). They find {Beta}(B{sup +} {yields} {rho}{sup +}{gamma}) = (1.20{sub -0.37}{sup +0.42} {+-} 0.20) x 10{sup -6}, {Beta}(B{sup 0} {yields} {rho}{sup 0}{gamma}) = (0.97{sub -0.22}{sup +0.24} {+-} 0.06) x 10{sup -6}, and a 90% C.L. upper limit {Beta}(B{sup 0} {yields} {omega}{gamma}) < 0.9 x 10{sup -6}, where the first error is statistical and the second is systematic. They also measure the isospin-violating quantity {Lambda}(B{sup +} {yields} {rho}{sup +}{gamma})/2{Lambda}(B{sup 0} {yields} {rho}{sup 0}{gamma}) - 1 = -0.43{sub -0.22}{sup +0.25} {+-} 0.10.

We present a search for the decays B {yields} K* {nu}{bar {nu}} using 454 x 10{sup 6} B{bar B} pairs collected at the {Upsilon}(4S) resonance with the BABAR detector at the SLAC PEP-II B-Factory. We first select an event sample where one B is reconstructed in a semileptonic or hadronic mode with one charmed meson. The remaining particles in the event are then examined to search for a B {yields} K* {nu}{bar {nu}} decay. The charged K* is reconstructed as K*{sup +} {yields} K{sub S}{sup 0}{pi}{sup +} or K*{sup +} {yields} K{sup +}{pi}{sup 0}; the neutral K* is identified in K*{sup 0} {yields} K{sup +}{pi}{sup -} mode. We establish upper limits at 90% confidence level of {Beta}(B{sup +} {yields} K*{sup +} {nu}{bar {nu}}) < 8 x 10{sup -5}, {Beta}(B{sup 0} {yields} K*{sup 0} {nu}{bar {nu}}) < 12 x 10{sup -5}, and {Beta}(B {yields} K* {nu}{bar {nu}}) < 8 x 10{sup -5}.

We present an update of the study of the Y(4260) resonance, produced in the process e{sup +}e{sup -} {yields} {gamma}{sub ISR} {pi}{sup +}{pi}{sup -} J/{psi} using initial-state radiation events at the PEP-II e{sup +}e{sup -} storage rings. This study is based on 454 fb{sup -1} of data recorded with the BABAR detector at a center-of-mass energy in the {Upsilon}(4S) resonance region. From a fit with a single non-relativistic Breit-Wigner shape we obtain updated parameters for the Y(4260) resonance which are m{sub Y} = 4252 {+-} 6{sub -3}{sup +2} MeV/c{sup 2} and {Lambda}{sub Y} = 105 {+-} 18{sub -6}{sup +4} MeV/c{sup 2}; we also measure {Beta}({pi}{sup +}{pi}{sup -} J/{psi}){Lambda}{sub e{sup +}e{sup -}} = (7.5 {+-} 0.9 {+-} 0.8) eV. We cannot confirm the recent BELLE observation of a broad structure around 4.05GeV/c{sup 2} in this decay mode.

The H-02 Wetland Treatment System (Figure 1) is used to remove heavy metals (e.g., copper and zinc) from the H-Area process and storm water discharge. Routine flow enters an equalization basin by inlets on either the east (Location 1) or west end (Location 2). The west end influent constitutes 75% of the average flow into the basin which has an average residence time of approximately 3 days at low pool (i.e., 120 gal/min. through a volume of 0.5 million gallons). The water then exits via the basin outlet on the east end. Next, the water flows to a splitter box (Location 3) which evenly separates the flow between two wetland cells for a design flow of 60 gal/min. per wetland cell with a residence time in the cell of approximately 2 days. The wetland effluent is then combined (Location 4) and flows through a spillway before reaching the National Pollution Discharge Elimination System (NPDES) measurement point near Road 4. During initial operation, it was observed that the pH of the water leaving the equalization basin was elevated compared to the influent pH. Furthermore, the elevated pH remained through the wetland cells so that there was an average pH of 10 …

The objective of this project has been to identify a process for separating transuranic species from silicon carbide (SiC). Silicon carbide has become one of the prime candidates for the matrix in inert matrix fuels, (IMF) being designed to reduce plutonium inventories and the long half-lives actinides through transmutation since complete reaction is not practical it become necessary to separate the non-transmuted materials from the silicon carbide matrix for ultimate reprocessing. This work reports a method for that required process.l

Growth in renewable energy in the U.S. over the past decade has been propelled by a number of forces, including rising fossil fuel prices, environmental concerns, and policy support at the state and federal levels. In this article, we review and discuss what are arguably the two most important types of state policies for supporting electricity generation from geothermal and other forms of renewable energy: renewables portfolio standards and utility integrated resource planning requirements. Within the Western U.S., where the vast majority of the nation's readily-accessible geothermal resource potential resides, these two types of state policies have been critical to the growth of renewable energy, and both promise to continue to play a fundamental role for the foreseeable future. In its essence, a renewables portfolio standard (RPS) requires utilities and other retail electricity suppliers to produce or purchase a minimum quantity or percentage of their generation supply from renewable resources. RPS purchase obligations generally increase over time, and retail suppliers typically must demonstrate compliance on an annual basis. Mandatory RPS policies are backed by various types of compliance enforcement mechanisms, although most states have incorporated some type of cost-containment provision, such as a cost cap or a cap on retail …

An automatic data-smoothing algorithm for data from digital oscilloscopes is described. The algorithm adjusts the bandwidth of the filtering as a function of time to provide minimum mean squared error at each time. It produces an estimate of the root-mean-square error as a function of time and does so without any statistical assumptions about the unknown signal. The algorithm is based on least-squares fitting to the data of cubic spline functions.

We are studying the gamma ray and neutron multiplicity of various fission processes, beginning with the spontaneous fission of {sup 252}Cf, for a variety of basic and applied science purposes. The Livermore-Berkeley Array for Collaborative Experiments (LiBerACE) consists of six high-purity germanium Clover detectors (HPGe) each enclosed by an array of 16 bismuth-germanate (BGO) detectors. These detectors were arranged in a cubic pattern around a 1 {micro}Ci {sup 252}Cf source to attempt to cover as much solid angle of gamma ray emission as possible with a high level of segmentation. The single-gamma detector response function is determined at several energies by tagging in a HPGe detector on the photopeak of one of two gamma rays in two-gamma ray calibration sources and observing the multiplicity of the remainder of the array. Summing these single-gamma responses in groups yields the response function of the array to higher multiplicity events, which are convolved with multiplicity distributions from theoretical models and compared to the measured results to test the models validity.

The wind power industry in the U.S. has been on a growth binge in recent years, and the rapid pace of development has made it difficult to keep up with trends in the marketplace. Yet the need for timely, objective information on the wind industry and its progress has never been greater. This article, excerpted from a longer report from the U.S. Department of Energy, attempts to fill this need by providing a comprehensive, yet detailed, overview of key developments in the U.S. wind power market, with a particular focus on 2007. This summary includes information on wind project installation trends, industry developments, and, perhaps most interestingly, project-level installed cost and pricing information that has not otherwise been widely reported. The article concentrates on larger-scale wind applications, defined here as projects utilizing turbines that exceed 50 kW in size. In many cases, the data reported here represent only a sample of all wind projects installed in the United States; furthermore, the data vary in quality. As such, emphasis should be placed on overall trends in the data, rather than on individual data points.

For better or worse, natural gas has become the fuel of choice for new power plants being built across the United States. According to the Energy Information Administration (EIA), natural gas-fired units account for nearly 90% of the total generating capacity added in the U.S. between 1999 and 2005 (EIA 2006b), bringing the nationwide market share of gas-fired generation to 19%. Looking ahead over the next decade, the EIA expects this trend to continue, increasing the market share of gas-fired generation to 22% by 2015 (EIA 2007a). Though these numbers are specific to the US, natural gas-fired generation is making similar advances in many other countries as well. A large percentage of the total cost of gas-fired generation is attributable to fuel costs--i.e., natural gas prices. For example, at current spot prices of around $7/MMBtu, fuel costs account for more than 75% of the levelized cost of energy from a new combined cycle gas turbine, and more than 90% of its operating costs (EIA 2007a). Furthermore, given that gas-fired plants are often the marginal supply units that set the market-clearing price for all generators in a competitive wholesale market, there is a direct link between natural gas prices and wholesale …

Assessments of bentonite barrier performance in waste management scenarios require an accurate description of the diffusion of water and solutes through the barrier. A two-compartment macropore/nanopore model (on which smectite interlayer nanopores are treated as a distinct compartment of the overall pore space) was applied to describe the diffusion of {sup 22}Na{sup +} in compacted, water-saturated Na-bentonites and then compared with the well-known surface diffusion model. The two-compartment model successfully predicted the observed weak ionic strength dependence of the apparent diffusion coefficient (D{sub a}) of Na{sup +}, whereas the surface diffusion model did not, thus confirming previous research indicating the strong influence of interlayer nanopores on the properties of smectite clay barriers. Since bentonite mechanical properties and pore water chemistry have been described successfully with two-compartment models, the results in the present study represent an important contribution toward the construction of a comprehensive two-compartment model of compacted bentonite barriers.

Over the past half-century, the Applied Mathematics program in the U.S. Department of Energy's Office of Advanced Scientific Computing Research has made significant, enduring advances in applied mathematics that have been essential enablers of modern computational science. Motivated by the scientific needs of the Department of Energy and its predecessors, advances have been made in mathematical modeling, numerical analysis of differential equations, optimization theory, mesh generation for complex geometries, adaptive algorithms and other important mathematical areas. High-performance mathematical software libraries developed through this program have contributed as much or more to the performance of modern scientific computer codes as the high-performance computers on which these codes run. The combination of these mathematical advances and the resulting software has enabled high-performance computers to be used for scientific discovery in ways that could only be imagined at the program's inception. Our nation, and indeed our world, face great challenges that must be addressed in coming years, and many of these will be addressed through the development of scientific understanding and engineering advances yet to be discovered. The U.S. Department of Energy (DOE) will play an essential role in providing science-based solutions to many of these problems, particularly those that involve the energy, …

The Department of Energy (DOE), National Energy Technology Center (NETL), has initiated a strategic plan for the development of advanced technologies needed to design and build fossil fuel plants with very high efficiency and environmental performance. These plants, referred to as 'Vision 21' and FutureGen programs by DOE, will produce electricity, chemicals, fuels, or a combination of these products, and possibly secondary products such as steam/heat for industrial use. MA956 is a prime candidate material being considered for a high temperature heat exchanger in the 'Vision 21' and FutureGen programs. This material is an oxide dispersion strengthened (ODS) alloy; however, there are some gaps in the data required to commit to the use of these alloys in a full-size plant. To fill the technology gaps for commercial production and use of the material for 'Advanced Power Generation Systems' this project has performed development activity to significant increase in circumferential strength of MA956 as compared to currently available material, investigated bonding technologies for bonding tube-to-tube joints through joining development, and performed tensile, creep and fire-side corrosion tests to validate the use and fabrication processes of MA956 to heat exchanger tubing applications. Development activities within this projected has demonstrated increased circumferential strength …

The U.S. Department of Energy (DOE) and American automotive manufacturers General Motors, Ford, and DaimlerChrysler began a five-year, cost-shared partnership in 1993. Currently, hybrid electric vehicle (HEV) research and development is conducted by DOE through its FreedomCAR and Vehicle Technologies (FCVT) program. The mission of the FCVT program is to develop more energy efficient and environmentally friendly highway transportation technologies. Program activities include research, development, demonstration, testing, technology validation, and technology transfer. These activities are aimed at developing technologies that can be domestically produced in a clean and cost-competitive manner. Under the FCVT program, support is provided through a three-phase approach [1] which is intended to: • Identify overall propulsion and vehicle-related needs by analyzing programmatic goals and reviewing industry’s recommendations and requirements, then develop the appropriate technical targets for systems, subsystems, and component research and development activities; • Develop and validate individual subsystems and components, including electric motors, emission control devices, battery systems, power electronics, accessories, and devices to reduce parasitic losses; and • Determine how well the components and subassemblies work together in a vehicle environment or as a complete propulsion system and whether the efficiency and performance targets at the vehicle level have been achieved. The research …

Using density-functional theory they found that, depending on coverage, coadsorbed oxygen can act both as a promoter and as an inhibitor of the dissociation of water on Ru(0001), the transition between these two behaviors occurring at (0.2 M). The key factor that determines this transition is the adsorption energy of the reaction products, OH in particular. The chemistry of this coadsorbed system is dictated by the effective coordination of the Ru atoms that participate in the bonding of the different species. In particular, they observed that a low coverage of oxygen increases the adsorption energy of the OH fraction on the Ru surface. This surprising extra stabilization of the OH with the coadsorption of oxygen can be understood in the context of the metallic bonding and could well correspond to a general trend for the coadsorption of electronegative species on metallic surfaces.

This Strategic Plan is EMSL’s template for achieving our vision of simultaneous excellence in all aspects of our mission as a national scientific user facility. It reflects our understanding of the long-term stewardship we must work toward to meet the scientific challenges of the Department of Energy and the nation. During the next decade, we will implement the strategies contained in this Plan, working closely with the scientific community, our advisory committees, DOE’s Office of Biological and Environmental Research, and other key stakeholders. This Strategic Plan is fully aligned with the strategic plans of DOE and its Office of Science. We recognize that shifts in science and technology, national priorities, and resources made available through the Federal budget process create planning uncertainties and, ultimately, a highly dynamic planning environment. Accordingly, this Strategic Plan should be viewed as a living document for which we will continually evaluate changing needs and opportunities posed by our stakeholders (i.e., DOE, users, staff, advisory committees), work closely with them to understand and respond to those changes, and align our strategy accordingly.

This report tabulates data generated by laboratory characterization and testing of three samples collected from tank C-103. The data presented here will form the basis for a release model that will be developed for tank C-103. These release models are being developed to support the tank risk assessments performed by CH2M HILL Hanford Group, Inc. for DOE.

The 100-F-50 waste site, part of the 100-FR-2 Operable Unit, is a steel stormwater runoff culvert that runs between two railroad grades in the south-central portion of the 100-F Area. The culvert exiting the west side of the railroad grade is mostly encased in concrete and surrounded by a concrete stormwater collection depression partially filled with soil and vegetation. The drain pipe exiting the east side of the railroad grade embankment is partially filled with soil and rocks. The 100-F-50 stormwater diversion culvert confirmatory sampling results support a reclassification of this site to no action. The current site conditions achieve the remedial action objectives and corresponding remedial action goals established in the Remaining Sites ROD. The results of confirmatory sampling show that residual contaminant concentrations do not preclude any future uses and allow for unrestricted use of shallow zone soils. The results also demonstrate that residual contaminant concentrations are protective of groundwater and the Columbia River.