The OSP (Operating Safety Procedure) required for performance of electrical arc testing of CFC replacement fluids was renewed. Electrical breakdown tests at one (1) atmosphere pressure have been performed for R-22, R-134a, and R-125/R-143a (50:50 blend; AZ-50), and breakdown products identified. No differences in HCFC breakdown products are seen in the presence or absence of lubricant oils. The design of the high pressure-high temperature test stand has been finalized, and construction initiated during this quarter. Three motor stators and rotors were received from Tecumseh Products Company for use in motor burnout tests. A test plan for the motor breakdown tests is in preparation.

The proposed research project consists of an integrated, two-stage fermentation and a highly energy-efficient product separation scheme. In the first fermentation, Butyribacterium methylotrophicum converts carbon monoxide (CO) into butyric acid and acetic acids which are then converted into butanol, ethanol, and a small amount of acetone in the second stage fermentation by Clostridium acetobutylicum. An advanced separation system process, based on pervaporation, removes the alcohols from the fermentation broth as they are formed, along with some of the hydrogen sulfide (H{sub 2}S), to minimize possible inhibition of the fermentations. This bioconversion process offers a critical advantage over conventional, catalytic processes for synthesis gas conversion: the microorganisms are several orders of magnitude more sulfur tolerant than metallic catalysts. The catalysts require sulfur removal to the parts per million level, while the microorganisms are unaffected by H{sub 2}S and carbonyl sulfide (COS) at one part per hundred--roughly the composition of sulfur in raw synthesis gas. During the two-year course of this project, the following major objectives have been accomplished: demonstrated long-term cell recycle of continuous fermentation of synthesis gas; demonstrated cell immobilization of Butyribacterium methylotrophicum; identified trickle-bed reactor as a viable alternative fermentation method; modulated metabolic pathways to increase C4 formation during …

This report describes the experimental and analytical program performed to determine the constitutive parameters of the reinforced concrete pad in the test facility used during the Low Power On-the-Ground portion of the NASA Boeing 757 HIRF Tests. These tests were conducted during the period September 20 to October 21, 1994 in the LESLI facility at the Phillips Laboratory, Kirtland AFB, NM. The on-the-ground tests were designed to meet several objectives including support of a flight test series and the generation of data for the validation of codes and models that could be used to predict the electromagnetic environment in transport aircraft. To satisfy these objectives, tests were to be executed in a known environment and the data compared to modeling results. A critical feature of this testing was the ``known environment`` which implies knowledge of the parameters which are critical to an effective modeling activity and which could include, among many other things, definitions of the airplane and its physical and electrical configuration, the ground upon which it sits when stationary, the fields impinging on the aircraft, and the radiating or bounding structure in the simulator. The authors would want to specify the electromagnetic characteristics of the entire space that …

Setpoints for nuclear safety-related instrumentation are required for actions determined by the design authorization basis. Minimum requirements need to be established for assuring that setpoints are established and held within specified limits. This document establishes the controlling methodology for changing setpoints of all classifications. The instrumentation under consideration involve the transfer, storage, and volume reduction of radioactive liquid waste in the F- and H-Area High-Level Radioactive Waste Tank Farms. The setpoint document will encompass the PROCESS AREA listed in the Safety Analysis Report (SAR) (DPSTSA-200-10 Sup 18) which includes the diversion box HDB-8 facility. In addition to the PROCESS AREAS listed in the SAR, Building 299-H and the Effluent Transfer Facility (ETF) are also included in the scope.

The OSP (Operating Safety Procedure) required for performance of electrical arc testing of CFC replacement fluids was renewed. Electrical breakdown tests at one atmosphere pressure have been performed for R-22, R-134a, and R-125/R-143a (50:50 blend; R-507), and breakdown products identified. No differences in HCFC breakdown products are seen in the presence or absence of lubricant oils. The design of the high pressure-high temperature test stand has been finalized, and construction initiated during this quarter. Three motor stators and rotors were received from Tecumseh Products Company for use in motor burnout tests. A test plan for the motor breakdown tests is in preparation.

The Department of Energy (Department) is responsible for establishing an underground repository to store high-level nuclear waste. In accordance with the amended Nuclear Waste Policy Act of 1982, the Department began characterization of the Yucca Mountain site to assess the feasibility of safely storing spent fuel and high-level waste for 10,000 years. Site characterization was originally scheduled to be completed in 1995. Subsequently, your predecessor, Admiral Watkins, changed the plan completion date to 2001. The purpose of our audit was to determine if the Department is making adequate progress in characterizing the Yucca Mountain project.

Ball lenses are important for many applications. For example, ball lenses can be used to match the mode of a laser diode (LD) to a single mode fiber (SMF), essential for low-loss, high bit rate communication systems. Modeling the propagation of LD light through a ball lens presents a challenge due to the large angular divergence of the LD field (typically > 20{degrees} HWHM) and the subsequent significant effect of spherical aberration. Accurately calculating the reflected power is also difficult, but essential, since reflections as small as {minus}30 dB can destabilize the LID. A full-wave analysis of this system using, e.g., a finite-difference time-domain method is not practical because of the size of the ball lens, typically hundreds of wavelengths in diameter. Approximate scalar methods can give good results in some cases, but fail to calculate reflected power and miss polarization effects entirely. The authors` approach exploits the fact that the scattering of an arbitrary electromagnetic beam from a sphere is an exactly solvable problem. The scattering of a plane wave from a sphere is a classical problem which was solved by Mie in 1908. More recently, various workers have considered the scattering of a Gaussian beam from a sphere …

This Criticality Safety Evaluation Report (CSER) covers the 340 Facility which acts as a collecting point for liquid and solid waste from various facilities in the 300 Area. Criticality safety is achieved by controlling the amount and concentration of the fissionable material sent to the 340 Facility from the originating facilities in the 300 Area, a method similar to that used elsewhere at Hanford for the waste tank farms. Unlike those, however, the waste received at the 340 Facility will be far less radioactive. It is concluded that present operations meet the two contingency criterion. The facility will still be safely subcritical even after two independent and concurrent failures (either of equipment or administrative controls). The solid waste storage and liquid waste will be managed separately. The solid waste storage area is classified as exempt because it contains less than 15 grams of fissionable materials. The Radioactive Liquid Waste System is classified as isolated because it contains less than one third of a minimum critical mass. The criticality safety of the 340 Facility devoted to the Radioactive Liquid Waste System (RLWS) is assured by the form and concentration of the fissile material and could also be classified as a limited …

Our current objectives are to modify the Hughes x-band radar for airborne implementation, to upgrade it to polarimetry, high-power, and add SLAR mode, and then to deploy in UK/US field experiments as needed. We are on schedule and within budget on bringing the airborne (Hughes A-3) system for future SAR and eventually, SLAR imaging at low grazing angles. Hughes and LLNL continued work on system integration, radar hardware, and associated control hardware and software. The belly radome design modification previously completed is now being procured. The overall radar and testbed remains on schedule for engineering checkout in April 1995, pending the arrival of FY95 funds as expected.

The equations of motion describing turbulent flows (in both the low and high Reynolds-number regimes) are well established. However, present day computers cannot meet the enormous computational requirement for numerically solving the governing equations for common engineering flows in the high Reynolds number turbulent regime. The characteristics that make turbulent, high Reynolds number flows difficult to simulate is the extreme range of time and space scales of motion. Most current engineering calculations are performed using semi-empirical equations, developed in terms of the flow mean (average) properties. These turbulence{open_quote} models{close_quote} (semi-empirical/analytical approximations) do not explicitly account for the eddy structures and thus, the temporal and spatial flow fluctuations are not resolved. In these averaging approaches, it is necessary to approximate all the turbulent structures using semi-empirical relations, and as a result, the turbulence models must be tailored for specific flow conditions and geometries with parameters obtained (usually) from physical experiments. The motivation for this research is the development of a finite element turbulence modeling approach which will ultimately be used to predict the wind flow around buildings. Accurate turbulence models of building flow are needed to predict the dispersion of airborne pollutants. The building flow turbulence models used today are not …

The authors review recent reactor- and spallation-source-based neutron scattering experiments on the magnetic fluctuations and order in a variety of doped transition metal oxides. In particular, data are shown for the NiO chain compound, Y{sub 2{minus}x}Ca{sub x}BaNiO{sub 5}, the two-dimensional cuprate superconductors La{sub 2{minus}x}Sr{sub x}CuO{sub 4} and YBa{sub 2}Cu{sub 3} O{sub 6+x}, and the classical three-dimensional ``Mott-Hubbard`` system V{sub 2{minus}y}O{sub 3}.

In sections 2-4 the authors present the fundamental mathematical model and the important features they have discovered during the last three years. The model presented in section 2 is typical of the set of equations studied by researchers in the past. However, a novel approach is taken here by the introduction of a stream function for the total mass flux. This is done because the differences and similarities between the one-dimensional and two-dimensional models emerge very clearly in this setting. The mathematical model is a quasilinear hyperbolic-elliptic system of partial differential equations. In one dimension the hyperbolic and elliptic parts decouple and in two dimensions they do not. As shocks and free boundaries are expected to play an important part, the authors also develop the jump conditions for the model in section 2.

Structural, electronic, and magnetic properties of metal-ceramic interfaces, M/MgO(001) (M=Pd, Rh, and Ru), have been investigated using the full potential linearized augmented-plane-wave method. Ru and Rh monolayers are found to be able to retain large spin magnetic moments on MgO(001) (1.95 {mu}{sub B} and 1.21 {mu}{sub B} for Ru and Ph; respectively) -- indicating, in principle, the potential application of MgO(001) as a benign substrate for 4d monolayer magnetism. Significantly, according to our atomic-force determinations, the metal overlayers induce a sizable buckling reconstruction in the interfacial MgO layer, which enhances the M-MgO binding energy by 0.1 eV. The weak M-0 interaction is mainly via tail effects; however, it affects the density of states at the Fermi level for Pd/Mg0(001) significantly and completely eliminates the small magnetic moment of the free Pd monolaver (0.34{mu}{sub B}).

This report describes a five-year plan for the construction and commissioning of a reliable and versatile NBTF facility for the production of high-quality, high-yield radioisotopes for research, biomedical, and industrial applications. The report is organized in nine sections providing, in consecutive order, responses to the nine questions posed by the U.S. Department of Energy in its solicitation for the NBTF Project Definition Study. In order to preserve direct correspondence (e.g., Sec. 3 = 3rd item), this Introduction is numbered {open_quotes}0.{close_quotes} Accelerator and facility designs are covered in Section 1 (Accelerator Design) and Section 2 (Facility Design). Preliminary estimates of capital costs are detailed in Section 3 (Design and Construction Costs). Full licensing requirements, including federal, state, and local ordinances, are discussed in Section 4 (Permits). A plan for the management of hazardous materials to be generated by NBTF is presented in Section 5 (Waste Management). An evaluation of NBTF`s economic viability and its potential market impact is detailed in Section 6(Business Plan), and is complemented by the plans in Section 7 (Operating Plan) and Section 8 (Radioisotope Plan). Finally, a plan for NBTF`s research, education, and outreach programs is presented in Section 9 (Research and Education Programs).

For the past few years, Lawrence Livermore National Laboratory has been conducting a comprehensive research program on the application of non-thermal plasmas for air pollution control and abatement. This program combines an extensive modeling effort with an experimental facility and test program. We believe that there are two major issues to be addressed in order to apply non-thermal plasma processing to air pollution control; these are electrical energy consumption and byproduct identification. The thrust of our work has been to understand the scalability of the non-thermal process by focusing on the energy efficiency of the non-thermal process and to identify the byproducts to ensure that effluent gases from a non-thermal processor are benign. We have compared different types of electrical discharge reactors both theoretically and experimentally. Our interests in the application of non-thermal plasmas vary from the destruction of volatile organic compounds (VOCs) to NO{sub x} reduction for mobile applications. This paper will discuss the processing of both NO{sub x} and VOCs by non-thermal plasmas at LLNL.

The scope of this Design Requirements Document (DRD) is to identify and define the functions, with associated requirements, which must be performed to separate Hanford Site tank waste supernatants into low-level and high-level fractions. This documents sets forth function requirements, performance requirements, and design constraints necessary to begin conceptual design for the Initial Pretreatment Module (IPM). System and physical interfaces between the IPM project and the Tank Waste Remediation System (TWRS) are identified. The constraints, performance requirements, and transfer of information and data across a technical interface will be documented in an Interface Control Document. Supplemental DRDs will be prepared to provide more detailed requirements specific to systems described in the DRD.

The University of Alabama at Birmingham (UAB) has conducted a study of the proposed National Biomedical Tracer Facility (NBTF). In collaboration with General Atomics, RUST International, Coleman Research Corporation (CRC), IsoMed, Ernst and Young and the advisory committees, they have examined the issues relevant to the NBTF in terms of facility design, operating philosophy, and a business plan. They have utilized resources within UAB, CRC and Chem-Nuclear to develop recommendations on environmental, safety and health issues. The Institute of Medicine Panel`s Report on Isotopes for Medicine and the Life Sciences took the results of prior workshops further in developing recommendations for the mission of the NBTF. The IOM panel recommends that the NBTF accelerator have the capacity to accelerate protons to 80 MeV and a minimum of 750 microamperes of current. The panel declined to recommend a cyclotron or a linac. They emphasized a clear focus on research and development for isotope production including target design, separation chemistry and generator development. The facility needs to emphasize education and training in its mission. The facility must focus on radionuclide production for the research and clinical communities. The formation of a public-private partnership resembling the TRIUMF-Nordion model was encouraged. An advisory panel …

The proposed National Biomedical Tracer Facility (NBTF) will house a high-current accelerator dedicated to production of short-lived radionuclides for biomedical and scientific research. The NBTF will play a vital role in repairing and maintaining the United States` research infrastructure for generation of essential accelerator-based radioisotopes. If properly designed and managed, the NBTF should also achieve international recognition as a Center-of-Excellence for research on radioisotope production methods and for associated education and training. The current report documents the results of a DOE-funded NBTF Project Definition Phase study carried out to better define the technical feasibility and projected costs of establishing and operating the NBTF. This report provides an overview of recommended Facility Design and Specifications, including Accelerator Design, Building Design, and the associated Construction Cost Estimates and Schedule. It is recommended that the NBTF be established as an integrated, comprehensive facility for meeting the diverse production, research, and educational missions set forth in previous documents. Based on an analysis of the projected production demands that will be placed on the NBTF, it appears that a 70 MeV, 1 mA, negative ion cyclotron will offer a good balance between production capabilities and the costs of accelerator purchase and operation. A preliminary architectural …

In late 1995, DOE is schedule to announce a new tritium production unit. Near the end of the last NPR (New Production Reactors) program, work was directed towards eliminating risks in current designs and reducing effects of accidents. In the Heavy Water Reactor Program at Savannah River, the coolant was changed from heavy to light water. An alternative, passively safe concept uses a heavy-water-filled, zircaloy reactor calandria near the bottom of a swimming pool; the calandria is supported on a light-water-coolant inlet plenum and has upflow through assemblies in the calandria tubes. The reactor concept eliminates or reduces significantly most design basis and severe accidents that plague other deigns. The proven, current SRS tritium cycle remains intact; production within the US of medical isotopes such as Mo-99 would also be possible.

This document presents the results from the analysis of the shot loading trainer (SLT). This device will be used to test the procedure for installing shot into the annulus of the Project W-320 shipping container. To ensure that the shot is installed uniformly around the container, vibrators will be used to settle the shot. The SLT was analyzed to ensure that it would not jeopardize worker safety during operation. The results from the static analysis of the SLT under deadweight and vibrator operating loads show that the stresses in the SLT are below code allowables. The results from the modal analysis show that the natural frequencies of the SLT are far below the operating frequencies of the vibrators, provided the SLT is mounted on pneumatic tires. The SLT was also analyzed for wind, seismic, deadweight, and moving/transporting loads. Analysis of the SLT is in accordance with SDC-4.1 for safety class 3 structures (DOE-RL 1993) and the American Institute of Steel Construction (AISC) Manual of Steel Construction (AISC 1989).

This document is a plan which serves as the contractual agreement between the Characterization Program, Sampling Operations, and WHC 222-C Laboratory. The scope of this plan is to provide guidance for the sampling and analysis of samples for tank 241-TY-104.

This document describes the software that controls the void fraction instrument. The format of the document may differ from typical Software Design Reports because it was created with a graphical programming language. Hardware is described in Section 2. The purpose of this document is describe the software, so the hardware description is brief. Software is described in Section 3. LabVIEW was used to develop the viscometer software, so Section 3 begins with an introduction to LabVIEW. This is followed by a description of the main program. Finally each Westinghouse developed subVI (sub program) is discussed.

Numerous computer codes calculate beam dynamics of particles traversing an accelerating gap. In order to carry out these calculations the electric field of a gap must be determined. The electric field is obtained from derivatives of the scalar potential which solves Laplace`s equation and satisfies the appropriate boundary conditions. An integral approach for the solution of Laplace`s equation is used in this work since the objective is to determine the potential and fields without solving on a traditional spatial grid. The motivation is to quickly obtain forces for particle transport, and eliminate the need to keep track of a large number of grid point fields. The problem then becomes one of how to evaluate the appropriate integral. In this work the integral solution has been converted to a finite sum of easily computed functions. Representing the integral solution in this manner provides a readily calculable formulation and avoids a number of difficulties inherent in dealing with an integral that can be weakly convergent in some regimes, and is, in general, highly oscillatory.

This document is a compilation of the information gathered from visits to the DOE Operations Offices. The purpose of these visits was to gather requirements for the modernization of the personnel security database. The initial phase of visits were to sites which had known local systems to augment CPCI. They were; Rocky Flats, Richland, Las Vegas, Savannah River, Oak Ridge, and Oakland. The second phase of site visits were to; Headquarters, Schenectady, Pittsburgh, Idaho Falls, Chicago, and Albuquerque. We also visited the NRC. At each site we reviewed the current clearance process in use at the field office. If the site had a local personnel security database (PSDB), we also reviewed the current PSDB processing. Each meeting was began with the a discussion on the purpose of the meeting and the background of the redesign effort.