A field study was performed by Idaho State University-Environmental Monitoring Laboratory (EML) to examine the directional dependency of low-volume air samplers. A typical continuous low volume air sampler contains a sample head that is mounted on the sampler housing either horizontally through one of four walls or vertically on an exterior wall `looking down or up.` In 1992, a field study was undertaken to estimate sampling error and to detect the directional effect of sampler head orientation. Approximately 1/2 mile downwind from a phosphate plant (continuous source of alpha activity), four samplers were positioned in identical orientation alongside one sampler configured with the sample head `looking down`. At least five consecutive weekly samples were collected. The alpha activity, beta activity, and the Be-7 activity collected on the particulate filter were analyzed to determine sampling error. Four sample heads were than oriented to the four different horizontal directions. Samples were collected for at least five weeks. Analysis of the alpha data can show the effect of sampler orientation to a know near source term. Analysis of the beta and Be-7 activity shows the effect of sampler orientation to a ubiquitous source term.

United States industry has a critical need for materials that are lightweight, strong, tough, corrosion resistant and capable of performing at high temperatures; such materials will enable substantial increase in energy efficiency and reduction in emissions of pollutants. Continuous fiber ceramic composites (CFCCs) are an emerging class of materials which have the potential for the desired combination of properties to meet the industrial needs. A $10 billion annual market has been estimated for CFCC products by the year 2010, which equates to over 100,000 industrial sector jobs. The CFCC program began in the spring of 1992 as a three-phase 10-year effort to assess potential applications of CFCC materials, develop the necessary supporting technologies to design, analyze and test CFCC materials, conduct materials and process development guided by the applications assessment input, fabricate test samples and representative components to evaluate CFCC material capabilities under application conditions, and analyze scaleability and manufacturability plus demonstrate pilot-scale production engineering. DOE awarded 10 Phase I cooperative agreements to industry-lead teams plus identified generic supporting technology projects. This document highlights the broad progress and accomplishments on these contracts and support technology projects during Phase I.

The scope of this Quality Assurance Program Plan (QAPP) is to provide a system of Quality Assurance reviews and verifications on the design, procurement and construction of the 219-S Secondary Containment Upgrade. The reviews and verifications will be on activities associated with design, procurement, and construction of the Secondary Containment Upgrade which includes, but is not limited to demolition, removal, new tank installation, tank 103 isolation, tank cell refurbishment, electrical, instrumentation, piping/tubing including supports, pump and valves, and special coatings. The full project scope is defined in the project Functional Design Criteria (FDC), SD-W178-FDC-001, and all activities must be in compliance with this FDC and related design documentation.

The Actinide Source Term represents the quantity of actinides that could be mobilized within WIPP brines and could migrate with the brines away from the disposal room vicinity. This document presents the various proposed methods for estimating this source term, with a particular focus on defining these methods and evaluating the defensibility of the models for mobile actinide concentrations. The conclusions reached in this document are: the 92 PA {open_quotes}expert panel{close_quotes} model for mobile actinide concentrations is not defensible; and, although it is extremely conservative, the {open_quotes}inventory limits{close_quotes} model is the only existing defensible model for the actinide source term. The model effort in progress, {open_quotes}chemical modeling of mobile actinide concentrations{close_quotes}, supported by a laboratory effort that is also in progress, is designed to provide a reasonable description of the system and be scientifically realistic and supplant the {open_quotes}Inventory limits{close_quotes} model.

The HC-21C Muffle Furnace Process has been experiencing problems with corrosion of the off-gas piping system. During the processing cycle, condensation is forming and corroding the off-gas piping. The corrosion products build up in the rotameters and cause them to be dysfunctional. The condensation is suspected to be occurring in the heat exchanger, so the test will bypass the heat exchanger to verify this. This process test will help to establish a temperature profile for the off-gas system near the rotameter. Also, this information will be used to help determine the location and cause of water condensation that is occurring in the off-gas equipment. The process test will include operating one of the two furnaces in Room 230A to stabilize Pu bearing material. During the test run, various temperature readings will be taken and visual inspections done.

This paper discusses and evaluates a number of authoring tools currently on the market. The tools evaluated are Visix Galaxy, NeuronData Open Interface Elements, Sybase Gain Momentum, XVT Power++, Aimtech IconAuthor, Liant C++/Views, and Inmark Technology zApp. Also discussed is the LIST project and how this evaluation is being used to fit an authoring tool to the project.

The purpose of the 340-NT-EX sampling system upgrade Operability Test Procedure (OTP) is to test and ensure the sampler system upgrades correctly interface with the control room alarm and recording functions. The sampling system monitors the exhaust air from a 300 Area waste handling facility for alpha, beta, gamma, particulate, and iodine releases.

The fall 1994 wildlife and vegetation surveys were completed October 3-7, 1994, at Norton Air Force Base (AFB), California. Two biologists from CDM Federal Programs, the U.S. Environmental Protection Agency (EPA) regional biologist and the Oak Ridge National Laboratory (ORNL) lead biologist conducted the surveys. A habitat assessment of three Installation Restoration Project (IRP) sites at Norton Air Force Base was also completed during the fall survey period. The IRP sites include: Landfill No. 2 (Site 2); the Industrial Wastewater Treatment Plant (IWTP) area; and Former Fire Training Area No. 1 (Site 5). The assessments were designed to qualitatively characterize the sites of concern, identify potential ecological receptors, and provide information for Remedial Design/Remedial Action activities. A Reference Area (Santa Ana River Wash) and the base urban areas were also characterized. The reference area assessment was performed to provide a baseline for comparison with the IRP site habitats. The fall 1994 survey is the second of up to four surveys that may be completed. In order to develop a complete understanding of all plant and animal species using the base, these surveys were planned to be conducted over four seasons. Species composition can vary widely during the course of a …

Of particular concern to facilities on the Hanford site is Title 40, Code of Federal Regulations, Chapter 40, Part 61, Subpart H, ``National emission Standards for Emissions of Radionuclides Other Than Radon From Department of Energy Facilities.`` Assessments of facility stacks and potential radionuclide emissions determined whether these stacks would be subject to the sampling and monitoring requirements of 40 CFR 61, Subpart H. Stack 296-B-5 exhausts 221-BB building which houses tanks containing B Plant steam condensate and B Plant process condensate from the operation of the low-level waste concentrator. The assessment of potential radionuclide emissions from the 296-B-5 stack resulted in an effective dose equivalent to the maximally exposed individual of less than 0.1 millirem per year. Therefore, the stack is not subject to the sampling and monitoring requirements of 40 CFR 61, Subpart H. However, the sampling and monitoring system must be in compliance with the Environmental Compliance Manual, WHC-CM-7-5. Currently, 296-B-5 is sampled continuously with a record sampler and continuous air monitor (CAM).

The goals of the C-106 sluicing operation are: (1) to stabilize the tank by reducing the heat load in the tank to less than 42 MJ/hr (40,000 Btu/hour), and (2) to initiate demonstration of single-shell tank (SST) retrieval technology. The purpose of this supporting document (SD) is as follows: (1) to provide safety classifications for items (systems, structures, equipment, components, or parts) for the waste retrieval sluicing system (WRSS), and (2) to document and methodology used to develop safety classifications. Appropriate references are made with regard to use of existing systems, structures, equipments, components, and parts for C-106 single-shell transfer tank located in the C Tank Farm, and 241-AY-102 (AY-102) double shell receiver tanks (DST) located in the Aging Waste Facility (AWF). The Waste Retrieval Sluicing System consists of two transfer lines that would connect the two tanks, one to carry the sluiced waste slurry to AY-102, and the other to return the supernatant liquid to C-106. The supernatant, or alternate fluid, will be used to mobilize waste in C-106 for the sluicing process. The equipment necessary for the WRSS include pumps in each tank, sluicers to direct the supernatant stream in C-106, a slurry distributor in AY-102, HVAC for …

The PWR Pool Chiller System is not longer required for support of the Shippingport Blanket Fuel Assemblies Storage. The Engineering Work Plan will provide the overall coordination of the documentation and physical changes to deactivate the unneeded subsystem. The physical removal of all energy sources for the Chiller equipment will be covered under a one time work plan. The documentation changes will be covered using approved Engineering Change Notices and Procedure Change Authorizations as needed.

The impact of particle size and chemical composition variations on determination of tank simulant moisture from near infrared (NIR) optical spectra are presented. This work shows particle size and chemical variations will impact moisture predictions from NIR spectra. However, the prediction errors can be minimized if calibration models are built with samples containing these variations as interferents. Prior work showed the NIR spectral region (1100 to 2500 nm) could be used to predict moisture content of BY-104 tank simulant with a standard error less of approximately 0.5 wt%. Particle size will increase moisture prediction error if calibration-models do not include the same particle size ranges as unknown samples. A combined particle size model with 0-420 {times}10{sup -6}m, 420-841 {times} 10{sup -6}m, and 841 {times} 10{sup -6} m-2 mm diameter particles predicted 0.59, 0.34 nd 0.23 wt% errors respectively for samples containing only these size ranges and 0.80 wt% error for a samples with all particle size ranges. Chemical composition would also increase moisture prediction error if calibration model samples chemically differ from unknown samples. For a BY-104 simulant, increases in NaOH, NaAlO{sub 2}, Na{sub 2} SiO{sub 3}, and Na{sub 3}PO{sub 4} produced moisture predictions that were lower than the actual …

The FAR Manual is a convenient easy-to-use collection of the functions, assignments, and responsibilities (FARs) of DOE nuclear safety personnel. Current DOE directives, including Orders, Secretary of Energy Notices, and other assorted policy memoranda, are the source of this information and form the basis of the FAR Manual. Today, the majority of FARs for DOE personnel are contained in DOE`s nuclear safety Orders. As these Orders are converted to rules in the Code of Federal Regulations, the FAR Manual will become the sole source for information relating to the functions, assignments, responsibilities of DOE nuclear safety personnel. The FAR Manual identifies DOE directives that relate to nuclear safety and the specific DOE personnel who are responsible for implementing them. The manual includes only FARs that have been extracted from active directives that have been approved in accordance with the procedures contained in DOE Order 1321.1B.

This is the second annual report covering progress made under DOE cooperative agreement DE-FC21-92MC29237, Molten Carbonate Fuel Cell Product Development Test. The project is for the design, construction, and testing of a 2MW carbonate fuel cell power plant in the City of Santa Clara, California. The report is divided into sections which describe the progress in various program activities, and provides an overview of the program, including the project objectives, site location, and schedule.

This report presents a Performance Improvement Measurement Methodology (PIMM) for measuring and reporting the mission performance for organizational elements of the U.S. Department of Energy to comply with the Chief Financial Officer`s Act (CFOA) of 1990 and the Government Performance and Results Act (GPRA) of 1993. The PIMM is illustrated by application to the Morgantown Energy Technology Center (METC), a Research, Development and Demonstration (RD&D) field center of the Office of Fossil Energy, along with limited applications to the Strategic Petroleum Reserve Office and the Office of Fossil Energy. METC is now implementing the first year of a pilot project under GPRA using the PIMM. The PIMM process is applicable to all elements of the Department; organizations may customize measurements to their specific missions. The PIMM has four aspects: (1) an achievement measurement that applies to any organizational element, (2) key indicators that apply to institutional elements, (3) a risk reduction measurement that applies to all RD&D elements and to elements with long-term activities leading to risk-associated outcomes, and (4) a cost performance evaluation. Key Indicators show how close the institution is to attaining long range goals. Risk reduction analysis is especially relevant to RD&D. Product risk is defined as …

The US Department of Energy (DOE) is preparing to request the US Environmental Protection Agency (EPA) to certify compliance of the Waste Isolation Pilot Plant (WIPP) with long-term requirements of the environmental Radiation Protection Standards for Management and Standards for Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Waste (40 CFR Part 191). The DOE must also demonstrate compliance with the long-term requirements of the Land Disposal Restrictions of the Resource Conservation and Recovery Act (RCRA) (40 CFR Part 268.6). Sandia National Laboratories (SNL) has ben conducting iterative performance assessments (PAs) for the the WIPP to provide guidance to the project on the technical activities required to determine long-term performance of the WIPP disposal system. The most recent PA was conducted in 1992. The objectives of this paper are to: (1) Identify and describe the relationship between non-Salado hydrology and the array of scenarios that might be relevant to the long-term performance of the repository. (2) Identify and describe the array of conceptual and mechanistic models that are required to evaluate the scenarios for the purpose of compliance. (3) Identify and describe the data/information that are required to support the conceptual and mechanistic models.

Gas generation by transuranic (TRU) waste is a significant issue because gas will, if produced in significant quantities, affect the performance of the Waste Isolation Pilot Plant (WIPP) with respect to Environmental Protection Agency (EPA) regulations for the long-term isolation of radioactive and chemically hazardous waste. If significant gas production occurs, it will also affect, and will be affected by, other processes and parameters in WIPP disposal rooms. The processes that will produce gas in WIPP disposal rooms are corrosion, microbial activity and radiolysis. This position paper describes these processes and the models, assumptions and data used to predict gas generation in WIPP disposal rooms.

A summary of the attractive characteristics of mirror devices is presented. Recent progress in development of axisymmetric mirror devices is described. Potentialities of mirrors as a basis for D{sup 3}He fusion power generators and high-flux neutron sources for fusion material tests are discussed.

Neutron powder diffraction was used to investigate the tetragonal to monoclinic transformation of ZrO{sub 2} in a A1{sub 2}O{sub 3}-ZrO{sub 2} ceramic composite containing 40 vol % tetragonal ZrO{sub 2}. The neutron diffraction data were analyzed using the Rietveld refinement technique, which allowed to determine the extent of the transformation as a function of temperature. The onset transformation temperature determined for this sample was 130 K. Below this temperature, the fraction of the monoclinic phase continued to increase to about 9 vol % at 80 K and remained constant for temperatures below 80 K. The calculated thermal expansion, using the refined lattice parameters, was found in excellent agreement with dilatometry data, confirming that the sharp increase in the thermal expansion upon cooling resulted from the tetragonal to monoclinic phase transformation in ZrO{sub 2}.

This report covers work completed during the seventh quarter for the project. The project consists of three tasks: the first relates to developing a database of waste volumes and disposal methods used by the industry; the second and third tasks are aimed at investigating technologies that could be used for the treatment of produced waters and developing cost estimates for those technologies. The remainder of this report describes progress related to the three tasks in the project. Overall, the majority of data analyses using information from the PED have been completed. A detailed correlation between well completions and a variety of environmental characteristics in the eight counties in Texas was developed. In terms of the treatment of produced water, much of the work in the past quarter was. focused on analyzing the costs associated with treatment using reverse osmosis and package treatment plants.

This chapter provides a snapshot of the existing PJM system and identifies the environmental constraints that form the parameters for the regional approaches analyzed in this study. The chapter begins with a description of the PJM system and the costs and emissions levels of the pollutants under study associated with the reference case (the PJM system configured to meet only Clean Air Act Amendment Phase I SO{sub 2} requirements and the March 1994 NO{sub x} requirements affecting Phase I units){sup 3}. Next, the pollution-reduction scenario assumed for the purpose of the study, which covers the period 1995--2010, is described. Finally, the impacts of this pollution reduction scenario -- emissions that would need to be avoided on the reference case PJM system -- are identified. Modeling methods are described alongside the study`s results. Other chapters discuss: environmental constraints, alternate plans to achieve environmental goals, and comparison of alternate plans.

Since 1987, Westinghouse Hanford Company has been a major contractor to the US Department of Energy, Richland Operations Office and has served as co-operator of the 300 Area Process Trenches, the waste management unit addressed in this closure plan. For the purposes of the Resource Conservation and Recovery Act, Westinghouse Hanford Company is identified as ``co-operator.`` The 300 Area Process Trenches Closure Plan (Revision 0) consists of a Resource Conservation and Recovery Act Part A Dangerous Waste Permit Application, Form 3 and a Resource Conservation and Recovery Act Closure Plan. An explanation of the Part A Permit Application, Form 3 submitted with this document is provided at the beginning of the Part A Section. The closure plan consists of nine chapters and six appendices. The 300 Area Process Trenches received dangerous waste discharges from research and development laboratories in the 300 Area and from fuels fabrication processes. This waste consisted of state-only toxic (WT02), corrosive (D002), chromium (D007), spent halogenated solvents (F001, F002, and F003), and spent nonhalogented solvent (F005). Accurate records are unavailable concerning the amount of dangerous waste discharged to the trenches. The estimated annual quantity of waste (item IV.B) reflects the total quantity of both regulated and …

This acceptance test procedure (ATP) was written to test the void fraction instrument (VFI) and verify that the unit is ready for field service. The procedure verifies that the mechanical and electrical features (not specifically addressed in the software ATP) and software alarms are operating as designed.

Many scientific computer codes involve linear systems of equations which are coupled only between nearest neighbors in a single dimension. The most common situation can be formulated as a tridiagonal matrix relating source terms and unknowns. This system of equations is commonly solved using simple forward and back substitution. The usual algorithm is spectacularly ill suited for parallel processing with distributed data, since information must be sequentially communicated across all domains. Two new tridiagonal algorithms have been implemented in FORTRAN 77. The two algorithms differ only in the form of the unknown which is to be found. The first and simplest algorithm solves for a scalar quantity evaluated at each point along the single dimension being considered. The second algorithm solves for a vector quantity evaluated at each point. The solution method is related to other recently published approaches, such as that of Bondeli. An alternative parallel tridiagonal solver, used as part of an Alternating Direction Implicit (ADI) scheme, has recently been developed at LLNL by Lambert. For a discussion of useful parallel tridiagonal solvers, see the work of Mattor, et al. Previous work appears to be concerned only with scalar unknowns. This paper presents a new technique which treats …