None

An engineering study was recently performed by Separations Process Design Engineering to determine the feasibility of processing the total Chemical Processing Department production load in the Purex Plant. This document summarizes the results of the study and the basis for the scope design or the multipurpose dissolvers for the Purex Plant.

This annual report details activities of the Hanford Atomic Products Operation (HAPO) during 1962.

This report documents information acquired from the operation of the purex process during the year of 1963 at the Hanford Site. The report is broken down into sections containing data collected on two to four week intervals. The data included: Performance, flowsheets, feed preparation, solvent extraction, product treatment, solvent treatment, acid recovery, waste concentration, fission product recovery, and waste treatment and storage.

The purpose of this January, 1963 report is to review existing Redox exhaust gas sampling equipment and to propose modifications and additions where appropriate. A study was conducted to determine what modifications, if any, should be made to the Redox exhaust gas sampling equipment to improve their present methods of monitoring for excessive amounts of fission product activity.

(VSR = vertical safety rod.) This report summarizes results of development programs which have evaluated vertical rod channel sleeving materials and provided flexible vertical rods, acceptable for both interim use before rod channel sleeving, and for subsequent use in sleeved channels. B{sub 4}C is the rod material; graphite and Al oxide are among the sleeve materials.

This document has been prepared for internal use by the General Electric Company to serve as a program for evaluating reactor instrumentation and safety circuit equipment needs. It is intended that this document be used as a guide for defining, planning and scheduling engineering effort; budgeting of capital money; and project planning for new instrumentation systems. Effort will be made to periodically evaluate the status of the programs presented and provide updating information accordingly.After a plant has been built and operated for a number of years, it becomes apparent to operating and engineering personnel that certain modifications in controls and monitoring systems would provide both tangible and intangible benefits. Systems which were once thought to be the primary points of control shift in importance as others become recognized. As time passes this shifting spreads the main control focus from the central control desk to various other areas in the control room. Production rate increases cause instrument ranges and scales to be changed so that information on the process can still be obtained from existing equipment. Response times, sensitivity, limits, and time constants which were figured for one level must be used or revised for new levels. Further, it is discovered …

This is the monthly report for the Hanford Laboratories Operation March 1963. Reactor fuels, chemistry, dosimetry, separation processes, reactor technology, financial activities, biology operation, physics and instrumentation research, operations research and synthesis, programming, and radiation protection operation are discussed.

This is the monthly report for the Hanford Laboratories Operation January 1963. Reactor fuels, chemistry, dosimetry, separation processes, reactor technology, financial activities, biology operation, physics and instrumentation research, operations research and synthesis, programming, and radiation protection operation are discussed.

This is the monthly report for the Hanford Laboratories Operation, April, 1963. Reactor fuels, chemistry, dosimetry, separation processes, reactor technology financial activities, biology operation, physics and instrumentation research, employee relations, applied mathematics operation, programming, and radiation protection operation discussed.

This document details activities of the irradiation processing department during the month of June, 1963. A general summary is included at the start of the report, after which the report is divided into the following sections: Research and Engineering Operations; Production and Reactor Operations; Facilities Engineering Operation; and Financial Operation.

This is the monthly report for the Hanford Laboratories Operation, June 1963. Metallurgy, reactor fuels, chemistry, dosimetry, separation processes, reactor technology, financial activities, visits, biology operation, physics and instrumentation research, and employee relations are discussed.

This is the monthly report for the Hanford Laboratories Operation, July 1963. Metallurgy, reactor fuels, chemistry, dosimetry, separation processes, reactor technology, financial activities, visits, biology operation, physics and instrumentation research, and employee relations are discussed.

This is the monthly report for the Hanford Laboratories Operation, October 1963. Metallurgy, reactor fuels, chemistry, dosimetry, separation processes, reactor technology, financial activities, visits, biology operation, physics and instrumentation research, and employee relations are discussed.

None

This is the monthly report for the Hanford Laboratories Operation, December 1962. Metallurgy, reactor fuels, chemistry, dosimetry, separation processes, reactor technology, financial activities, visits, biology operation, physics and instrumentation research, and employee relations are discussed.

This document details activities of the irradiation processing department during the month of January, 1963. A general summary is included at the start of the report, after which the report is divided into the following sections: Research and Engineering Operations; Production and Reactor Operations; Facilities Engineering Operation; and Financial Operation.

This document details activities of the irradiation processing department during the month of October, 1963. A general summary is included at the start of the report, after which the report is divided into the following sections: Research and Engineering Operations; Production and Reactor Operations; Facilities Engineering Operation; and Financial Operation.

This is the monthly report for the Hanford Laboratories Operation, September 1963. Metallurgy, reactor fuels, chemistry, dosimetry, separation processes, reactor technology, financial activities, visits, biology operation, physics and instrumentation research, and employee relations are discussed.

This document discusses the leak repair of the 107-D retention basin. Leakage of effluent water from the 107-D Basin had increased from 6000 gallons per minute in November of 1959 to the peak of 8000 gallons per minute in April of 1963. Washout of fines had apparently created large voids beneath the north and west walls and endangered the integrity of the structure by settling the wall 2 in. at one place. The leakage was arrested in March of 1963 by filling the voids with concrete and grout and sealing the repairs with a newly developed sealant. Present total leakage is 3750 gallons per minute.

For the radioisotopes with half-lives over a year, only eight appear to be obtainable in the foreseeable future. The fission products, strontium-90, cesium-137, and promethium-147, exist in wastes from reactor processing, diluted with enormous volumes of other elements and salts. Among those isotopes producible by irradiation of special target materials (cobalt-60, uranium-232, plutonium-238, and curium-244) cobalt-60, though easy to produce, requires a special design for the heat source generator because much of its emitted energy is penetrating gamma radiation. Cobalt-60 appears, therefore, to be rather limited in its prospects for use. Plutonium-238 is favored as a heat source because of its long half-line and no need for special shielding. However, its projected high cost, scarcity, and biological hazard encourages the search for a competitive material. When plutonium assumes a significant place as a recycled fuel in thermal reactors for power production, curium-244 can then become available at costs below that for plutonium-238. Curiunm-244 has five times the specific power of plutonium-238 and appears to be just as easy to handle. Promethium-147, although probably on the ''short end'' of the half-life scale, can be considered for some uses as a substitute for plutonium-238. Although the factors of availability, gamma activity, and …

The following analysis of the induced radioactivity in SNAP-50/SPUR electrical machinery having a high cobalt content is submitted. Induced radioactivity in the flight vehicle will contribute negligibly to allowable radiation levels. This is especially so due to the low neutron to gamma ratio of assumed radiation damage tolerances to semiconductors. A calculation to estimate the order of magnitude of induced radioactivity in cobalt is attached. The calculation is based on a best guess of the neutron spectrum directly behind a lithium hydride shield. The resulting low cobalt activity and associated dose rate of about 1 mr/hr at 10 ft from a generator or a motor is insignificant. Although the evaluation indicates insignificant levels of induced radioactivity, this conclusion is not applicable to a ground test. Neutron moderation and scattering from a containment vessel and biological shield would greatly perturb the neutron environment behind the flight shield. Posttest handling of all components within the vacuum test chamber will undoubtedly be a problem. Notwithstanding the importance of limiting induced radioactivity, other considerations such as economy, cooling and vacuum requirements will largely dictate the final facility design. In summary, an activation analysis involves the overall facility design and will not be readily resolved. …

An information storage and retrieval system (PIC) was developed, utilizing the IBM 7090 computer, for handling data pertaining to the effects of neutron irradiation on metals. The input includes a reference identification, an appropriate abstract or extract summarizing the article, code identification parameters analogous to those used by the ASM-SLA Literature Classification System, and special codes identifying relevant irradiation and testing parameters. The output contains the same data plus printing out the meaning of all special codes. Presently, the information storage consists of more than two hundred references representing several thousand lines of information. The system is both general and definitive, permitting the selection of a single piece of information or of many references dealing with a general field. It is possible to select material on the basis of one or more of the following factors: material, general or specific; type of literature; general or specific property such as mechanical tests or tensile tests; conditions of irradiation including type and level of flux, integrated flux, irradiation temperature, and reactor environment; test conditions such as temperature and environment; and general variables that might be controlling such as strain rate, specimen geometry, grain size, and fabrication history. It is felt that this …

A procedure is described for the activation determination of V in powdered milk using 3.77-min V/sup 52/. The quantity of V in the sample is obtained by comparing the V/sup 52/ radioactivity found in the test sample with the V/sup 52/ radioactivity in a V comparator sample that is treated in the same manner as the test sample. The procedure can also be used for the determination of V in a variety of materials. (P.C.H.)