The La Primavera geothermal field is located about 20 km west of the city of Guadalajara, Jalisco, in the western part of the Mexican Neovolcanic Axis. Initial results of five deep exploration wells (down to 2000 m depth) were very promising; measured downhole temperatures exceed 300{degrees}C. During production, however, downhole temperatures dropped, and the chemistry of the fluids changed. The analysis of geologic, mineralogic, geochemical, and well completion data indicate that colder fluids flow down the wellbore from shallower aqifers cooling the upper zones of the gothermal reservoir. This problem is attributed to inadequate well completions. Doubts have arisen about continuing the exploration of the field because of the somewhat disappointing drilling results. However, a more thorough analysis of all available data indicates that a good geothermal prospect might exist below 3000 m, and that it could be successfully developed with appropriately located and completed wells.

Recently a significant role of artificial and/or natural cracks in the geothermal reservoir has been demonstrated in the literatures (Abe, H., et al., 1983, Nielson, D.L. and Hullen, J.B., 1983), where the cracks behave as fluid paths and/or heat exchanging surfaces. Until now, however, there are several problems such as a design procedure of hydraulic fracturing, and a quantitative estimate of fluid and heat transfer for reservoir design. In order to develop a design methodology of geothermal reservoir cracks, a special distinguished research project, named as ''{Lambda}-Project'', started at Tohoku University (5 years project, 1983-1988). In this project a basic fracture mechanics model of geothermal reservoir cracks is being demonstrated and its validation is being discussed both theoretically and experimentally. This paper descibes an outline of ''{Lambda}-Project''.

A basic concept of the geothermal reservoir as a set of cracks is first presented. Extensions of subsurface cracks during well stimulation treatments at Nigorikawa(Mori) and closure operations of production well-head valves at Kakkonda are analysed and their behaviors are demonstrated based on results of long-distance AE Measurements.

More efficient use of the nation's electrical energy infrastructure will result in minimizing the cost of energy to the end user. Using real time electrical market information coupled with defined rules, market opportunities can be identified that provide economic benefit for both users and marketers of electricity. This report describes the design of one such system and the features a fully functional system would provide. This report documents several investigated methods of controlling load diversity or shifting.

Urbanization is reshaping China's economy, society, and energy system. Between 1990 and 2008 China added more than 300 million new urban residents, bringing the total urbanization rate to 46%. The ongoing population shift is spurring energy demand for new construction, as well as additional residential use with the replacement of rural biomass by urban commercial energy services. This project developed a modeling tool to quantify the full energy consequences of a particular form of urban residential development in order to identify energy- and carbon-efficient modes of neighborhood-level development and help mitigate resource and environmental implications of swelling cities. LBNL developed an integrated modeling tool that combines process-based lifecycle assessment with agent-based building operational energy use, personal transport, and consumption modeling. The lifecycle assessment approach was used to quantify energy and carbon emissions embodied in building materials production, construction, maintenance, and demolition. To provide more comprehensive analysis, LBNL developed an agent-based model as described below. The model was applied to LuJing, a residential development in Jinan, Shandong Province, to provide a case study and model proof of concept. This study produced results data that are unique by virtue of their scale, scope and type. Whereas most existing literature focuses on building-, …

The overall purpose of this project is to evaluate the biological and economic feasibility of restoring high-quality forests on mined land, and to measure carbon sequestration and wood production benefits that would be achieved from forest restoration procedures. In this segment of work, our goal was to review methods for estimating tree survival, growth, yield and value of forests growing on surface mined land in the eastern coalfields of the USA, and to determine the extent to which carbon sequestration is influenced by these factors. Public Law 95-87, the Surface Mining Control and Reclamation Act of 1977 (SMCRA), mandates that mined land be reclaimed in a fashion that renders the land at least as productive after mining as it was before mining. In the central Appalachian region, where prime farmland and economic development opportunities for mined land are scarce, the most practical land use choices are hayland/pasture, wildlife habitat, or forest land. Since 1977, the majority of mined land has been reclaimed as hayland/pasture or wildlife habitat, which is less expensive to reclaim than forest land, since there are no tree planting costs. As a result, there are now hundreds of thousands of hectares of grasslands and scrublands in various …

The requirements of a gamma-ray burst optical counterpart detector are reviewed. By taking advantage of real-time notification of bursts, new instruments can make sensitive searches while the gamma-ray transient is still in progress. A wide field of view camera at Livermore National Laboratories has recently been adapted for detecting GRB optical counterparts to a limiting magnitude of 8. A more sensitive camera, capable of reaching m{sub upsilon} = 14, is under development.

Metallic fuel development is reported concerning N-reactor fuel element failures, target element development, target element closure welds, alternate target element closure systems, alternate uranium compositions, N-fuel support development, hot die size fuel cladding, improved closures for ThO{sub 2} elements, and N-reactor meltdown tests in the IRP. Corrosion and water quality studies are proceeding with emphasis on downstream pitting of aluminium process tubes, hydride formation in zircaloy tubes, groove and ledge corrosion of aluminium, pitting corrosion of carbon steel in filtered water, storage basin studies, examination of K reactor process tubes, zircaloy tube hydriding studies,nickel plated aluminium, effect of beryllium and uranium on the corrosion of zircaloy-2, and examination of zircaloy-2 graphite cooling tube. Thermal hydraulics studies include boiling burnout experiments for N-reactor and heat transfer experiments for K-reactor. Graphite studies include burnout monitoring in the N-reactor and graphite contraction.

We consider supersymmetric models where the scale of supersymmetry breaking lies between 5 x 10{sup 6} GeV and 5 x 10{sup 8} GeV. In this class of theories, which includes models of gauge mediated supersymmetry breaking, the lightest supersymmetric particle is the gravitino. The next to lightest supersymmetric particle is typically a long lived charged slepton with a lifetime between a microsecond and a second, depending on its mass. Collisions of high energy neutrinos with nucleons in the earth can result in the production of a pair of these sleptons. Their very high boost means they typically decay outside the earth. We investigate the production of these particles by the diffuse flux of high energy neutrinos, and the potential for their observation in large ice or water Cerenkov detectors. The relatively small cross-section for the production of supersymmetric particles is partially compensated for by the very long range of heavy particles. The signal in the detector consists of two parallel charged tracks emerging from the earth about 100 meters apart, with very little background. A detailed calculation using the Waxman-Bahcall limit on the neutrino flux and realistic spectra shows that km{sup 3} experiments could see as many as 4 events …

None

Arcing is a well-known, unwanted discharge regime observed on the surface of sputtering targets. The discharge voltage breaks down to less than 50 V while the current jumps to elevated levels. Arcing is unwanted because it prevents uniform deposition and creates particulates. The issue of arcing has been dealt with by target surface conditioning and by using modern power supplies that have arc suppression incorporated. With increasing quality requirements in terms of uniformity of coatings, and absence of particulates, especially for electrochromic and other advanced coatings applications, the issue of arcing warrants a closer examination with the goal to find other, physics-based, and hopefully better approaches of arcing prevention. From a physics point of view, the onset of arcing is nothing else than the transition of the discharge to a cathodic arc mode, which is characterized by the ignition of non-stationary arc spots. Arc spots operate by a sequence of microexplosions, enabling explosive electron emission, as opposed to secondary electron emission. Arc spots and their fragments have a size distribution in the micrometer and sub-micrometer range, and a characteristic time distribution that has components shorter than microseconds. Understanding the ignition conditions of arc spots are of central physical interest. Spot …

It is argued that detection of heavy leptons at the Superconducting Super Collider seems to be very difficult but perhaps not impossible. The feasibility is shown to depend critically upon the ability to identify events with W's decaying hadronically and missing transverse momentum. (LEW)

The boreal summer intraseasonal variability (BSISV) associated with the 30-50 day mode is represented by the co-existence of three components, poleward propagation of convection over the Indian and tropical west Pacific longitudes and eastward propagation along the equator. The hypothesis that the three components influence each other has been investigated using observed OLR, NCEP-NCAR reanalysis, and solutions from an idealized linear model. The null hypothesis is that the three components are mutually independent. Cyclostationary EOF (CsEOF) analysis is applied on filtered OLR to extract the life-cycle of the BSISV. The dominant mode of CsEOF is significantly tied to observed rainfall over the Indian subcontinent. The components of the heating patterns from CsEOF analysis serve as prescribed forcings for the linear model. This allows us to ascertain which heat sources and sinks are instrumental in driving the large-scale monsoon circulation during the BSISV life-cycle. We identify three new findings: (1) the circulation anomalies that develop as a Rossby wave response to suppressed convection over the equatorial Indian Ocean associated with the previous break phase of the BSISV precondition the ocean-atmosphere system in the western Indian Ocean and trigger the next active phase of the BSISV, (2) the development of convection over …

Polarization measurements at X-ray and gamma-ray energies can provide crucial information on the emission region around massive compact objects such as black holes and neutron stars. The Polarized Gamma-ray Observer (PoGO) is a new balloon-borne instrument designed to measure polarization from such astrophysical objects in the 30-100 keV range, under development by an international collaboration with members from United States, Japan, Sweden and France. The PoGO instrument has been designed by the collaboration and several versions of prototype models have been built at SLAC. The purpose of this experiment is to test the latest prototype model with a radioactive gamma-ray source. For this, we have to polarize gamma-rays in a laboratory environment. Unpolarized gamma-rays from Am241 (59.5 keV) were Compton scattered at around 90 degrees for this purpose. Computer simulation of the scattering process in the setup predicts a 86% polarization. The polarized beam was then used to irradiate the prototype PoGO detector. The data taken in this experiment showed a clear polarization signal, with a measured azimuthal modulation factor of 0.35 {+-} 0.02. The measured modulation is in very close agreement with the value expected from a previous beam test study of a polarized gamma-ray beam at the Argonne …

SPEAR 3, a synchrotron radiation source at the Stanford Linear Accelerator Center, has been in operation for the past two years. SPEAR 3 was designed to achieve high beam lifetimes while operating at a higher current level than previously achieved with SPEAR 2. Maintaining high electron beam lifetimes within the ring allows users to perform their experiments with a consistent supply of high current synchrotron radiation. The purpose of this analysis is to evaluate the SPEAR 3 vacuum system's performance during the 2004 and 2005 runs while considering methods to optimize and improve vacuum system conditioning, especially within the pumping system, so that a recommended plan of action can be created for the FY 2006 run. Monitoring the dynamics of the electron beam within the ring can be a difficult task. Pressure data obtained from the gages attached to pumps, temperature data obtained from thermocouples located at various locations around the ring, and beam lifetime projections help to provide some indication of the health of the electron beam, but the true conditions within the beam chamber can only be extrapolated. Data collected from sensors (gauges, thermocouples, etc.) located around the ring can be viewed and extracted from a program created …

Five new gas geothermometers are introduced. They are useful for predicting subsurface temperatures in water dominated geothermal systems. The geothermometers use data on CO{sub 2}, H{sub 2}S and H{sub 2} concentrations in fumarole steam as well as CO{sub 2}/H{sub 2} and H{sub 2}S/H{sub 2} ratios. It is demonstrated that the gas composition of fumarole steam may be used with or withour drillhole data to evaluate steam condensation in the upflow zones of geothermal systems. Uncertainty exists, however, in distinguishing between the effects of steam condensation and phase separation at elevated pressures. The gas content in steam from discharging wells and the solute content of the water phase can be used to evaluate which boiling processes lead to "excess steam" in the discharge and at which temperature this "excess steam" is added to the fluid moving through the aquifer and into the well. Examples, using field data, are given to demonstrate all the mentioned applications of geothermal chemistry.

We developed a mathematical method to analyze flow cytometry data to describe the kinetics of {gamma}H2AX and pATF2 phosphorylations ensuing various qualities of low dose radiation in normal human fibroblast cells. Previously reported flow cytometry kinetic results for these DSB repair phospho-proteins revealed that distributions of intensity were highly skewed, severely limiting the detection of differences in the very low dose range. Distributional analysis reveals significant differences between control and low dose samples when distributions are compared using the Kolmogorov-Smirnov test. Radiation quality differences are found in the distribution shapes and when a nonlinear model is used to relate dose and time to the decay of the mean ratio of phosphoprotein intensities of irradiated samples to controls. We analyzed cell cycle phase and radiation quality dependent characteristic repair times and residual phospho-protein levels with these methods. Characteristic repair times for {gamma}H2AX were higher following Fe nuclei as compared to X-rays in G1 cells (4.5 {+-} 0.46 h vs 3.26 {+-} 0.76 h, respectively), and in S/G2 cells (5.51 {+-} 2.94 h vs 2.87 {+-} 0.45 h, respectively). The RBE in G1 cells for Fe nuclei relative to X-rays for {gamma}H2AX was 2.05 {+-} 0.61 and 5.02 {+-} 3.47, at 2 …

The US Department of Energy (DOE) is preparing to request the US Environmental Protection Agency (EPA) to certify compliance of the Waste Isolation Pilot Plant (WIPP) with long-term requirements of the environmental Radiation Protection Standards for Management and Standards for Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Waste (40 CFR Part 191). The DOE must also demonstrate compliance with the long-term requirements of the Land Disposal Restrictions of the Resource Conservation and Recovery Act (RCRA) (40 CFR Part 268.6). Sandia National Laboratories (SNL) has ben conducting iterative performance assessments (PAs) for the the WIPP to provide guidance to the project on the technical activities required to determine long-term performance of the WIPP disposal system. The most recent PA was conducted in 1992. The objectives of this paper are to: (1) Identify and describe the relationship between non-Salado hydrology and the array of scenarios that might be relevant to the long-term performance of the repository. (2) Identify and describe the array of conceptual and mechanistic models that are required to evaluate the scenarios for the purpose of compliance. (3) Identify and describe the data/information that are required to support the conceptual and mechanistic models.

An HCl laser which uses isotopic V-V energy transfer collisions as a pumping mechanism has been demonstrated. This multiline laser, which utilized an intracavity cold gas isotope filter, increased the energy from the P/sub 1/ lines of H/sup 37/Cl while decreasng the energies of the P/sub 1/ and P/sub 2/ lines of H/sup 35/Cl. Previously unreported lines, including emission from R branch transitions, have also been observed from single-line HCl and HBr lasers.

Programming a computer that optimizes the beam in the Brookhaven AGS is discussed. Layout, method, and routines are given particular attention, and representative data cards are shown. (D.C.W.)

A simple code is described that finds marginally stable (..omega../sup 2/ = 0) ballooning-type MHD modes, localized about a field line in an axisymmetric, open-ended, plasma confinement device. The equations are based on a lower bound for the perturbed energy delta W, derived by W. Newcomb from the ideal MHD energy principle, and are cast in the form of a Ricatti equation for the first derivative of the eigenfunction, with the open boundary conditions that this derivative vanish at the plasma boundary down each field line. The input to the code is the two-dimensional shape of a field line, the field strength B(s), and parameters to define pressure profiles throughout the system. The objective is to find the highest plasma pressures for which the given line is MHD-stable.

From time to time the normal SLC physics program is to be interrupted so that beam can be delivered to PEP. In order that the switch to PEP injection (and the switch back again) can be accomplished quickly and easily, the gun, the damping rings, the linac phase ramp, the energy profile of the linac klystrons for the scavenger bunch, and the entire positron production system are to be kept the same as in the SLC configuration. What mainly remains to be changed is the linac klystron profile for the leading two bunches - those going to PEP. The new klystron profile must be such that it leaves these two beams (1) with final energies that match that of the storage ring and (2) with final energy spectra that fit within the energy aperture of the PEP transfer line. The conditions that need to be met in order to achieve these two goals are discussed in this note. 1 ref., 2 figs.

Contaminants present in paper recycling mills can degrade product properties and can also lead to substantial downtime. Of these, adhesive material such as hot melts and pressure sensitive adhesives are especially troublesome. These are known as “ stickies ” and their handling and re- moval requires process equipment such as screens and cleaners as well as chemical additives. In the preceding phase of the project we demonstrated that firing an underwater spark in a tank of stock reduces the tack of the stickies and reduces their impact. The present phase was to demon- strate the technology in full-scale trials, address any issues that might arise, and commercialize the process. Trials were run at the Appleton papers mill in West Carrollton, OH, the Graphics Packag- ing mill at Kalamazoo, MI, Stora Enso mills at Duluth, MN, and Wisconsin Rapids, WI, and the Jackson Paper mill at Sylva, NC. It was shown that the sparker not only detackified stickies but also increased the efficiency of their removal by centrifugal cleaners, improved the effectiveness of dissolved air flotation, and increased the efficiency of flotation deinking. It is estimated that the sparker improves the efficiency of hydrocyclone cleaner, deinking cells and dissolved and dispersed …

The objective of this project has been to identify a process for separating transuranic species from silicon carbide (SiC). Silicon carbide has become one of the prime candidates for the matrix in inert matrix fuels, (IMF) being designed to reduce plutonium inventories and the long half-lives actinides through transmutation since complete reaction is not practical it become necessary to separate the non-transmuted materials from the silicon carbide matrix for ultimate reprocessing. This work reports a method for that required process.l