Results of multidimensional computations of sprays in a very high pressure constant volume chamber are presented in two parts. Comparisons of computed and measured penetrations of non-vaporizing and vaporizing sprays are presented. A broad range of density ratios (0.005 to 0.243) is covered. It is shown that, provided sufficient numerical resolution is used, the model can adequately reproduce the measurements. Scaling laws for time and distance derived in a previous publication are found to apply also to the sprays over the broad range of density ratios considered. A combustion sub-model that has been used in spark-ignition engines, stratified-charge engines and Diesel engines is included in the model. The combustion sub-model represents low-temperature autoignition and high temperature heat release. Comparisons of computed and measured penetrations of combusting sprays and computed and measured chamber pressures are being made. In this report, only preliminary indicative comparisons of computed and measured chamber pressures for three cases are presented. Agreement of pressures within 5% is shown. The work is ongoing and a detailed report will be presented later.

The International Linear Collider (ILC) has a 14 mrad crossing angle in order to aid extraction of spent bunches. As a result of the bunch shape at the interaction point, this crossing angle at the collision causes a large luminosity loss which can be recovered by rotating the bunches prior to collision using a crab cavity. The ILC baseline crab cavity is a 9-cell superconducting dipole cavity operating at a frequency of 3.9 GHz. In this paper the design of the ILC crab cavity and its phase control system, as selected for the RDR in February 2007 is described in fuller detail.

The Supernova/Acceleration Probe (SNAP) is a proposed space-based experiment designed to study the dark energy and alternative explanations of the acceleration of the Universe's expansion by performing a series of complementary systematics-controlled astrophysical measurements. We here describe a self-consistent reference mission design that can accomplish this goal with the two leading measurement approaches being the Type Ia supernova Hubble diagram and a wide-area weak gravitational lensing survey. This design has been optimized to first order and is now under study for further modification and optimization. A 2-m three-mirror anastigmat wide-field telescope feeds a focal plane consisting of a 0.7 square-degree imager tiled with equal areas of optical CCDs and near infrared sensors, and a high-efficiency low-resolution integral field spectrograph. The instrumentation suite provides simultaneous discovery and light-curve measurements of supernovae and then can target individual objects for detailed spectral characterization. The SNAP mission will discover thousands of Type Ia supernovae out to z = 3 and will obtain high-signal-to-noise calibrated light-curves and spectra for a subset of > 2000 supernovae at redshifts between z = 0.1 and 1.7 in a northern field and in a southern field. A wide-field survey covering one thousand square degrees in both northern and southern …

Today's manufacturing systems and equipment must perform at levels thought impossible a decade ago. Companies must push operations, quality, and efficiencies to unprecedented levels while holding down costs. In this new economy, companies must be concerned with market shares, equity growth, market saturation, and profit. U.S. manufacturing is no exception and is a prime example of businesses forced to adapt to constant and rapid changes in customer needs and product mixes, giving rise to the term ''Agile Manufacturing''. The survival and ultimate success of the American Manufacturing economy may depend upon its ability to create, innovate, and quickly assess the impact that new innovations will have on its business practices. Given the need for flexibility, companies need proven methods to predict and measure the impact that new technologies and strategies will have on overall plant performance from an enterprise perspective. The Value-Derivative Model provides a methodology and approach to assess such impacts in terms of energy savings, production increases, quality impacts, emission reduction, and maintenance and operating costs as they relate to enabling and emerging technologies. This is realized by calculating a set of first order sensitivity parameters obtained from expanding a Taylor Series about the system's operating point. These …

This work explores the potential reach of the 7 TeV LHC to new colored states in the context of simplified models and addresses the issue of which search regions are necessary to cover an extensive set of event topologies and kinematic regimes. This article demonstrates that if searches are designed to focus on specific regions of phase space, then new physics may be missed if it lies in unexpected corners. Simple multiregion search strategies can be designed to cover all of kinematic possibilities. A set of benchmark models are created that cover the qualitatively different signatures and a benchmark multiregion search strategy is presented that covers these models.

None

The January 2, 1992 explosion in an electrochemistry laboratory at SRI International (SRI) resulted in the death of scientist Andrew Riley, and gained some notoriety due to its association with experimental work in the controversial field of cold fusion research. Selected components of explosion debris were subjected to forensic analyses at LLNL to elucidate potential causes of, or contributing factors to, the explosion. Interrogation of the debris by LLNL encompassed nuclear, chemical, physical, and materials investigations. Nuclear studies for the determination of tritium and neutron-activation products in stainless steel and brass were negative. No evidence of signature species indicative of orthodox nuclear events was detected. The inorganic and particulate analyses were likewise negative with respect to residues of unexpected chemical species. Such target compounds included conventional explosives, accelerants, propellants, or any exceptional industrial chemicals. The GC-MS analyses of trace organic components in the explosion debris provided perhaps the most interesting results obtained at LLNL. Although no evidence of organic explosives, oxidizers, or other unusual compounds was detected, the presence of a hydrocarbon oil in the interior of the electrochemical cell was established. It is likely that its source was lubricating fluid from the machining of the metal cell components. If …

In September 1994 the DOE Richland Operations Office (RL) approved the FY 1995 multi-year baseline that included a cost estimate of $1.9 billion for FY 1996. However, Congress only appropriated $1.3 billion for that year. The shortfall of $600 million resulted in a significant challenge to accomplish the required workscope. Therefore, RL initiated an aggressive cost savings program to eliminate the shortfall by deleting workscope that was unnecessary and performing the remaining workscope more efficiently. RL initiated baseline planning actions (including deletions, deferrals, transfers, and additions) during the FY 1996 multi-year baseline development process to match workscope and anticipated funding and identified $205 million of workscope deletions. CFR (Contract Finance and Review Division) then reviewed over 200 cost baseline change requests during FY 1996 and documented an additional $95 million of FY 1996 cost savings. This included $73 million of workscope deletions and $22 million of efficiencies. Total savings as a result of FY 1996 initiatives, including baseline planning actions and current year initiatives, were $300 million. This report contains tables which enumerate the savings realized within each program at Hanford.

Cost savings are an integral part of Hanford site operations. Congressional actions towards establishing a balanced budget have resulted in reductions to funding for all federal agencies, including the Department of Energy (DOE) Environmental Management (EM) cleanup mission. In September 1994 the DOE Richland Operations Office (RL) approved the FY 1995 multi-year baseline that included a cost estimate of $1.9 billion for FY 1996. However, Congress only appropriated $1.3 billion for that year. The shortfall of $600 million resulted in a significant challenge to accomplish the required workscope. Therefore, RL initiated an aggressive cost savings program to eliminate the shortfall by deleting workscope that was unnecessary and performing the remaining workscope more efficiently. RL initiated baseline planning actions (including deletions, deferrals, transfers, and additions) during the FY 1996 multi-year baseline development process to match workscope and anticipated funding and identified $205 million of workscope deletions. CFR (Contract Finance and Review Division) then reviewed over 200 cost baseline change requests during FY 1996 and documented an additional $95 million of FY 1996 cost savings. This included $73 million of workscope deletions and $22 million of efficiencies. Total savings as a result of FY 1996 initiatives, including baseline planning actions and current …

A review of the theories of electron paramagnetic resonance in biology is presented, including a discussion of the nature of the physical observation, followed by examples of materials of biological interest. Iq discussing these examples, information is presented in terms of the nature of the starting material under observation rather than the nature of the magnetic entities observed. The examples proceed from the simpler molecules of biological interest (metabolites, vitamins, cofactors) into the more complex materials (polymers, proteins, nucleic acids) toward cellular organelles (mitochondria, chloroplasts) and, finally, to whole cells, organisms and organs. The observation of photoinduced unpaired electrons in photosynthetic material is described and the various parameters controlling it are discussed. The basic observation is interpreted in terms of a primary photophysical act of quantum conversion.

The Battelle Research Reactor is a modified pool reactor located in a sparsely settled 500-acre tract owned by Battelle 13 miles west of Columbus, Ohio. The reactor has been operating since October 29, 1956, at power levels up to 1 megawatt. More than 300 megawattdays have been logged on the reactor with most of this operation at a power level of 1 megawatt. No serious incidents have occurred during the operation of the reactor. With only a few modifications the reactor will operate continuously at a power level of 2 megawatts. First, interlock will be added to the safety instrumentation to scram the reactor in the event of significant reduction in the flow rate of the primary coolant. Second, to provide additional margin of safety against the possibility of local boiling occurring in the core, the primary flow rate will be increased to greater than 1500 gpm. Third, a 700-gallon holdup tank will be added to the primary coolant system to allow for decay of the nitrogen16 formed in the coolant as it passes through the core. Holdup will reduce the dose rate at the surface of the pool to 4 mr per hr or less during routine 2-megawatt operation. …

Semi-solid metal (SSM) processing has emerged as an attractive method for near-net-shape manufacturing due to the distinct advantages it holds over conventional near-net-shape forming technologies. These advantages include lower cycle time, increased die life, reduced porosity, reduced solidification shrinkage, improved mechanical properties, etc. SSM processing techniques can not only produce the complex dimensional details (e.g. thin-walled sections) associated with conventional high-pressure die castings, but also can produce high integrity castings currently attainable only with squeeze and low-pressure permanent mold casting processes. There are two primary semi-solid processing routes, (a) thixocasting and (b) rheocasting. In the thixocasting route, one starts from a non-dendritic solid precursor material that is specially prepared by a primary aluminum manufacturer, using continuous casting methods. Upon reheating this material into the mushy (a.k.a. "two-phase") zone, a thixotropic slurry is formed, which becomes the feed for the casting operation. In the rheocasting route (a.k.a. "slurry-on-demand" or "SoD"), one starts from the liquid state, and the thixotropic slurry is formed directly from the melt via careful thermal management of the system; the slurry is subsequently fed into the die cavity. Of these two routes, rheocasting is favored in that there is no premium added to the billet cost, and …

I outline particle simulations and theory of relativistic shock waves in an e/sup +-/ plasma. Magnetic reflection of particles is an essential role in the shock structure. Instability of the reflected particles in the shock front produces intense extraordinary mode radiation. Such shocks are candidates for the particle accelerator in plerions and in extragalactic jets only if the upstream Poynting flux composes no more than 10% of the total. I summarize analytical and numerical studies of radiation dominated accretion onto the magnetic poles of neutron stars. The upper limit to the photon luminosity depends upon magnetic confinement, not upon the dragging of photons into the star. Numerical solutions show the plasma forms large scale ''photon bubbles.'' I suggest the percolative loss of radiation controls the pressure and therefore the limits of magnetic confinement. Loss of magnetic confinement through resistive interchange instability is suggested as a means of generating TeV to PeV voltage drops along the magnetic field. 34 refs., 6 figs., 1 tab.

The authors present branching fraction measurements for the radiative decays B{sup +} {yields} {rho}{sup +}{gamma}, B{sup 0} {yields} {rho}{sup 0}{gamma}, and B{sup 0} {yields} {omega}{gamma}. The analysis is based on a data sample of 465 million B{bar B} events collected with the BABAR detector at the PEP-II asymmetric-energy B Factory located at the Stanford Linear Accelerator Center (SLAC). They find {Beta}(B{sup +} {yields} {rho}{sup +}{gamma}) = (1.20{sub -0.37}{sup +0.42} {+-} 0.20) x 10{sup -6}, {Beta}(B{sup 0} {yields} {rho}{sup 0}{gamma}) = (0.97{sub -0.22}{sup +0.24} {+-} 0.06) x 10{sup -6}, and a 90% C.L. upper limit {Beta}(B{sup 0} {yields} {omega}{gamma}) < 0.9 x 10{sup -6}, where the first error is statistical and the second is systematic. They also measure the isospin-violating quantity {Lambda}(B{sup +} {yields} {rho}{sup +}{gamma})/2{Lambda}(B{sup 0} {yields} {rho}{sup 0}{gamma}) - 1 = -0.43{sub -0.22}{sup +0.25} {+-} 0.10.

We present a search for the decays B {yields} K* {nu}{bar {nu}} using 454 x 10{sup 6} B{bar B} pairs collected at the {Upsilon}(4S) resonance with the BABAR detector at the SLAC PEP-II B-Factory. We first select an event sample where one B is reconstructed in a semileptonic or hadronic mode with one charmed meson. The remaining particles in the event are then examined to search for a B {yields} K* {nu}{bar {nu}} decay. The charged K* is reconstructed as K*{sup +} {yields} K{sub S}{sup 0}{pi}{sup +} or K*{sup +} {yields} K{sup +}{pi}{sup 0}; the neutral K* is identified in K*{sup 0} {yields} K{sup +}{pi}{sup -} mode. We establish upper limits at 90% confidence level of {Beta}(B{sup +} {yields} K*{sup +} {nu}{bar {nu}}) < 8 x 10{sup -5}, {Beta}(B{sup 0} {yields} K*{sup 0} {nu}{bar {nu}}) < 12 x 10{sup -5}, and {Beta}(B {yields} K* {nu}{bar {nu}}) < 8 x 10{sup -5}.

We present an update of the study of the Y(4260) resonance, produced in the process e{sup +}e{sup -} {yields} {gamma}{sub ISR} {pi}{sup +}{pi}{sup -} J/{psi} using initial-state radiation events at the PEP-II e{sup +}e{sup -} storage rings. This study is based on 454 fb{sup -1} of data recorded with the BABAR detector at a center-of-mass energy in the {Upsilon}(4S) resonance region. From a fit with a single non-relativistic Breit-Wigner shape we obtain updated parameters for the Y(4260) resonance which are m{sub Y} = 4252 {+-} 6{sub -3}{sup +2} MeV/c{sup 2} and {Lambda}{sub Y} = 105 {+-} 18{sub -6}{sup +4} MeV/c{sup 2}; we also measure {Beta}({pi}{sup +}{pi}{sup -} J/{psi}){Lambda}{sub e{sup +}e{sup -}} = (7.5 {+-} 0.9 {+-} 0.8) eV. We cannot confirm the recent BELLE observation of a broad structure around 4.05GeV/c{sup 2} in this decay mode.

We wish to measure the EMI efficiency at hadron momenta higher than the 3 GeV used at the Beavatron. We propose to use the 30 M{sup 3} bubble chamber as the momentum and spatial analyzer of charged hadrons both of the incident beam and those final state hadrons of interactions that occur within the chamber. We would use the EMI modules as mounted on the bubble chamber vacuum tank to measure the efficiency of the EMI absorbers (coils and zinc) over a wide range of momenta. A hadron signature would be either the lack of a proportional chamber (pc) encoding within the '96% muon-circle' or a multiple PC encoding. We shall attempt to identify {pi}-{mu} decays in the chamber to use as a source of muons. Such a test would give us experience in spatially reconstructing tracks within the chamber and in projecting their trajectories out to the EMI detector modules. The early portion of this test could utilize whatever hadron beam the NAL bubble chamber group would be using at the time. We would make a copy of an adequate number of the original frames and compare the film quality with the original ones to test whether the EMI …

At the LHC, top quark pairs are dominantly produced from gluons, making it difficult to measure the top quark forward-backward asymmetry. To improve the asymmetry measurement, we study variables that can distinguish between top quarks produced from quarks and those from gluons: the invariant mass of the top pair, the rapidity of the top-antitop system in the lab frame, the rapidity of the top quark in the top-antitop rest frame, the top quark polarization and the top-antitop spin correlation. We combine all the variables in a likelihood discriminant method to separate quark-initiated events from gluon-initiated events. We apply our method on models including G-prime's and W-prime's motivated by the recent observation of a large top quark forward-backward asymmetry at the Tevatron. We have found that the significance of the asymmetry measurement can be improved by 10% to 30%. At the same time, the central values of the asymmetry increase by 40% to 100%. We have also analytically derived the best spin quantization axes for studying top quark polarization as well as spin-correlation for the new physics models.

The DWPF Salt Cell Vent Condenser (SCVC) includes a High Efficiency Mist Eliminator (HEME) designed to remove mercury aerosols that may form in the Precipitate Reactor (PR) condenser. The Savannah River Technology Center was requested by DWPF to make a performance assesssment of a prototypic HEME element in the vent system of the Precipitate Hydrolysis Experimental Facility at TNX.[sup a]

The DWPF Salt Cell Vent Condenser (SCVC) includes a High Efficiency Mist Eliminator (HEME) designed to remove mercury aerosols that may form in the Precipitate Reactor (PR) condenser. The Savannah River Technology Center was requested by DWPF to make a performance assesssment of a prototypic HEME element in the vent system of the Precipitate Hydrolysis Experimental Facility at TNX.

The signal and background for the search of the Standard Model Higgs boson in the intermediate mass range 80 GeV < m{sub H} < 2M{sub Z} is studied based on calculations of the cross sections in next-to-leading order QCD perturbation theory for the production of the Higgs boson via gluon-gluon fusion and for the hadronic two-photon production. The method of Monte-Carlo integration allows the application of realistic cuts (p{sub T}, rapidity, photon isolation) to the cross section. Results are given for the K-factors of the signal and the background. It turns out that the NLO corrections improve the situation for a Higgs boson mass in the range of 80--120 GeV. Furthermore, the influence of a cut on the transverse momentum of the additional jet produced in the processes gg {yields} Hg, gq {yields} Hq, q{bar q} {yields} Hg is compared to a similar cut for the background.

None

None

This Number System Cross Reference Guide constitutes a ready reference for programing the MCS-8 Microcomputer or designing logic systems. Columns give the number equivalents of decimal, binary, octal, and hexidecimal systems for decimal numbers zero through 255, as well as a corresponding teletype character opposite each row of equivalent numbers. (RWR)