The study has two principal objectives: (1) To evaluate the effects of fracture closure on the recovery of oil and gas reserves from naturally fractured petroleum or natural gas reservoirs. (2) To evaluate procedures for improving the recovery of these reserves using innovative fluid injection techniques to maintain reservoir pressure and mitigate the impact of fracture closure. The total scope of the study has been subdivided into three main tasks: (1) Baseline studies (non-pressure sensitive fractures); (2)studies with pressure sensitive fractures; and (3) innovative approaches for improving oil recovery.

The overall objective of this project is to develop a fuller understanding of the interactions of mixtures of anionic co-contaminants with oxide-mineral surfaces. Our specific focus is on the competitive interactions of chromate and oxalic acid on ferric oxyhydroxide and on natural aquifer materials. Chromate and oxalate are of practical interest as widespread contaminants at many DOE facilities. However, these anions also are excellent model adsorbates for elucidating fundamental aspects of ionic adsorption processes, particularly with respect to organic acids.

The overall objective of this project is to develop a fuller understanding of the interactions of mixtures of anionic co-contaminants with oxide-mineral surfaces. Our specific focus is on the competitive interactions of chromate and oxalic acid on ferric oxyhydroxide and on natural aquifer materials. Chromate and oxalate are of practical interest as widespread contaminants at many DOE facilities. However, these anions also are excellent model adsorbates for elucidating fundamental aspects of ionic adsorption processes, particularly with respect to organic acids.

the U5.0 Undulator, and 89 period, 5 cm period length, 4.6 m long insertion device has been designed, is being fabricated and is scheduled for completion in early 1992. This undulator will be the first high brightness source, in the 50 to 1500 eV range, for the Advanced Light Source (ALS) at the Lawrence Berkeley Laboratory. A hybrid magnetic configuration using Nd-Fe-B permanent magnet material and vanadium permendur poles has been selected to achieve the field quality needed to meet performance requirements. The magnetic structure is modular with each half consisting of 5 assembly sections, which provide the periodic structure, and end structures, for entrance and exit correction, mounted on a steel backing beam. Each assembly section consists of 35 half-period pole assemblies bolted to a mount. The required 0.837 Tesla effective peak field at a 1.4 cm gap has been verified with model measurements. Vertical field integral correction is accomplished with the end structures, each having an arrangement of permanent magnet rotors which will be adjusted to minimize electron beam missteering over the undulator operating field range. To reduce the effect of environmental fields, the steel backing beams are connected through parallel, low-reluctance, Ni-Fe hinges. The magnetic structure is …

The Long Trace Profiler has found significant applications in measuring the surfaces of synchrotron optics. However, requirements of small slope errors at all spatial wavelengths of the synchrotron optics mandate more accurate slope measurements. A straightness reference for the Long Trace Profiler greatly increases the accuracy of the instrument. Methods of using the straightness reference by interpreting the sequential interference patterns are discussed and results of measurements are presented.

The Long Trace Profiler has found significant applications in measuring the surfaces of synchrotron optics. However, requirements of small slope errors at all spatial wavelengths of the synchrotron optics mandate more accurate slope measurements. A straightness reference for the Long Trace Profiler greatly increases the accuracy of the instrument. Methods of using the straightness reference by interpreting the sequential interference patterns are discussed and results of measurements are presented.

This paper presents a straightforward analytical and numerical method for the design of a specific type of varied line-space grating system. The mathematical development will assume plane or nearly-plane spherical gratings which are illuminated by convergent light, which covers many interesting cases for synchrotron radiation. The gratings discussed will have straight grooves whose spacing varies across the principal plane of the grating. Focal relationships and formulae for the optical grating-pole-to-exist-slit distance and grating radius previously presented by other authors will be derived with a symbolic algebra system. It is intended to provide the optical designer with the tools necessary to design such a system properly. Finally, some possible advantages and disadvantages for application to synchrotron to synchrotron radiation beamlines will be discussed.

This paper presents a straightforward analytical and numerical method for the design of a specific type of varied line-space grating system. The mathematical development will assume plane or nearly-plane spherical gratings which are illuminated by convergent light, which covers many interesting cases for synchrotron radiation. The gratings discussed will have straight grooves whose spacing varies across the principal plane of the grating. Focal relationships and formulae for the optical grating-pole-to-exist-slit distance and grating radius previously presented by other authors will be derived with a symbolic algebra system. It is intended to provide the optical designer with the tools necessary to design such a system properly. Finally, some possible advantages and disadvantages for application to synchrotron to synchrotron radiation beamlines will be discussed.

The three objectives of the program are: To isolate by the technique of two-dimensional polyacrylamide gel electrophoresis (2-D PAGE), proteins of special interest because of the relative mutability of the corresponding gene, establish the identity of the protein, and, for selected proteins, move to a characterization of the corresponding gene; To develop a more efficient approach, based on 2-D PAGE, for the detection of variants in DNA, with special reference to the identification of a variant in a child not present in either parent of the child (i.e., a mutation); and, To continue an effective interface with the genetic studies on the children of atomic bomb survivors in Japan, with reference to both the planning and implementation of new studies at the molecular level. For administrative purposes, the program is subdivided into four sections, each under the direction of one of the four co-PIs; the progress during the past year will be summarized in accordance with this sectional structure. 1 tab.

A collective Thomson scattering (CTS) diagnostic system for localized measurement of energetic ions is being developed for TFTR. This system will use a 200KW, 56GHz gyrotron and a sensitive heterodyne receiver. In addition, a key element of this system will be beam and viewing dumps which are needed to minimize detection of stray gyrotron and ECE background radiation by the receiver system. It is the purpose of this study to determine the size and location of these dumps inside TFTR taking into account beam refraction and launch and receiver antenna optics scanning. The beam dump must cover all the area in the vacuum chamber where the beam is expected to impinge, and the viewing dump must cover all the areas within the direct line of sight of the receiver antenna. The beam launch system and the receiver antenna are to be placed nearly symmetrically above and below the midplane of the tokamak vacuum vessel, respectively. The beam dump is to be placed at the bottom inside of the vacuum vessel to absorb the gyrotron beam which will be launched from a top port. The viewing dump is expected to be placed symmetrically at the top inside of the vacuum vessel, …

A mathematical model has been developed to simulate operation of the waste tank farm and the associated evaporator systems at the Savannah River Site. The model solves material balance equations to predict the volumes of liquid waste, salt, and sludge for all of the tanks within each of the evaporator systems. Additional logic is included to model the behavior of waste tanks not directly associated with the evaporators. Input parameters include the Material Management Plan forecast of canyon operations, specification of other waste sources for the evaporator systems, evaporator operating characteristics, and salt and sludge removal schedules. The model determines how the evaporators will operate, when waste transfers can be made, and waste accumulation rates. Output from the model includes waste tank contents, summaries of systems operations, and reports of space gain and the remaining capacity to store waste materials within the tank farm. Model simulations can be made to predict waste tank capacities on a daily basis for up to 20 years. The model is coded as a set of three computer programs designed to run on either IBM compatible or Apple Macintosh II personal computers.

A mathematical model has been developed to simulate operation of the waste tank farm and the associated evaporator systems at the Savannah River Site. The model solves material balance equations to predict the volumes of liquid waste, salt, and sludge for all of the tanks within each of the evaporator systems. Additional logic is included to model the behavior of waste tanks not directly associated with the evaporators. Input parameters include the Material Management Plan forecast of canyon operations, specification of other waste sources for the evaporator systems, evaporator operating characteristics, and salt and sludge removal schedules. The model determines how the evaporators will operate, when waste transfers can be made, and waste accumulation rates. Output from the model includes waste tank contents, summaries of systems operations, and reports of space gain and the remaining capacity to store waste materials within the tank farm. Model simulations can be made to predict waste tank capacities on a daily basis for up to 20 years. The model is coded as a set of three computer programs designed to run on either IBM compatible or Apple Macintosh II personal computers.

This report summarizes the activities of the research project entitled {open_quotes}Study of Chip Breaking Mechanisms in Orthogonal Cutting{close_quotes}. The research effort took place from April 1990 to June 1991. The overall objective of the project was to develop a systematic procedure for gaining a more fundamental understanding of chip breaking mechanics. Central to this objective is a computer model that can simulate chip formation in orthogonal cutting. This model has been under development for the past seven years at NCSU. The model is based on an Eulerian formulation of the finite element technique. The model simulates the cutting process for various tool geometries over a wide range of cutting conditions. The model can be used to predict chip geometry, cutting forces, plastic strains, strain rates, and temperatures in the workpiece and chip, as well as temperatures in the tool itself. Of particular significance is that specific tool geometries can be simulated. Therefore, the model can be used to systematically evaluate the strains, strain rates, temperature, and geometry of the chip as a function of a specific chip-breaker tool design. These results can provide the crucial information necessary to formulate a fundamental understanding of the chip breaking mechanism over a wide …

The unique advantages of fusion rocket propulsion systems for distant missions are explored using the magnetic dipole configurations as an example. The dipole is found to have features well suited to space applications. Parameters are presented for a system producing a specific power of kW/kg, capable of interplanetary flights to Mars in 90 days and to Jupiter in a year, and of extra-solar-system flights to 1000 astronomical units (the Tau mission) in 20 years. This is about 10 times better specific power performance than nuclear electric fission systems. Possibilities to further increase the specific power toward 10 kW/kg are discussed, as is an approach to implementing the concept through proof-testing on the moon. 20 refs., 14 figs., 2 tabs.

We have studied the light yield in two straight fibers embedded in a square scintillator tile by means of computer simulation. The tile and fiber dimensions are taken in the ballpark of interest for the SDC main calorimeter. A fairly flat total response across the tile can be obtained. Important parameters to be controlled are identified.

The purpose of this research is to determine the concentration of the cryocondensates in fluids of the various USDOE Geopressured wells as a function of production volume. The wells are visited each month that they are operating and samples are to be taken cryogenically during each visit. A gas scrubbing system will continuously samples the gas streams of the wells in the intervals between visit. Collectors, exchanged daily by site personnel, are retrieved on each visit.

The purpose of this research is to determine the concentration of the cryocondensates in fluids of the various USDOE Geopressured wells as a function of production volume. The wells are visited each month that they are operating and samples are to be taken cryogenically during each visit. A gas scrubbing system will continuously samples the gas streams of the wells in the intervals between visit. Collectors, exchanged daily by site personnel, are retrieved on each visit.

The primary objective of the project is to examine the relations between the catalytic and magnetic properties of the copper-cobalt higher alcohol synthesis catalysts. We have undertaken to investigate the magnetic character by studying the Nuclear Quadrupole resonance of copper and (Zerofield) Nuclear Magnetic Resonance of cobalt in copper cobalt catalysts.

The primary objective of the project is to examine the relations between the catalytic and magnetic properties of the copper-cobalt higher alcohol synthesis catalysts. We have undertaken to investigate the magnetic character by studying the Nuclear Quadrupole resonance of copper and (Zerofield) Nuclear Magnetic Resonance of cobalt in copper cobalt catalysts.