The objective of this study is to develop a methodology for a probabilistic assessment of the reliability and security of electrical energy distribution networks. This includes consideration of the future grid system, which will rely heavily on the existing digitally based communication infrastructure for monitoring and protection. Another important objective of this study is to provide information and insights from this research to Consolidated Edison Company (Con Edison) that could be useful in the design of the new network segment to be installed in the area of the World Trade Center in lower Manhattan. Our method is microscopic in nature and relies heavily on the specific design of the portion of the grid being analyzed. It extensively models the types of faults that a grid could potentially experience, the response of the grid, and the specific design of the protection schemes. We demonstrate that the existing technology can be extended and applied to the electrical grid and to the supporting communication network. A small subsection of a hypothetical grid based on the existing New York City electrical grid system of Con Edison is used to demonstrate the methods. Sensitivity studies show that in the current design the frequency for the …

The commercial feasibility of the electrolytic process for Th production has been demonstrated. The cell produced 7 lb. of good quality metal per hour. A cathode cooling system was developed. The major construction materials, Ni and graphite, were satisfactory. The process yield was 86%. (T.R.H.)

The collector efficiency study developed a solar collector rating methodology specific to Wisconsin conditions. Existing rating programs were researched and a collector methodology was developed. A computer program was written to calculate the collector ratings and 25 collector models were rated. The accuracy of the proposed rating methodology was evaluated for 16 collectors placed in 11 domestic hot water systems. One liquid space heating analysis with storage and one air space heating analysis without storage were completed. A solar assisted heat pump in which the solar collectors function as evaporators was also analyzed.

We are working on developing an Integrated Systems Analysis Environment (ISAE) for application to analysis and optimization of Intelligent Transportation Systems (ITS). ISAE is based on the concept of Co-simulation, which allows the modeling of complex systems with extreme flexibility. Co-simulation allows the development of virtual ITS systems that can be analyzed and optimized as an overall integrated system. The virtual ITS system is defined by selecting different components from a component library. System component models can be written in multiple programming languages running on different computer platforms. At the same time, ISAE provides full protection for proprietary models. Co-simulation is a cost-effective alternative to competing methodologies, such as developing a translator or selecting a single programming language for all system components. Co-simulation has been recently demonstrated using an example of an automotive system. The demonstration was successfully performed. The paper describes plans on how to implement ISAE and Co-simulation to ITS, and the great advantages that this implementation would represent.

Conventional disposable glass-fiber high efficiency particulate air (HEPA) filters are used throughout the Department of Energy complex in various process systems. Alternative filter media is being addressed that would have a long life on the HLW tanks.

The hydration of an outer layer on nuclear waste glasses is known to occur during leaching, but the actual speciation of hydrogen (as water or hydroxyl groups) in these layers has not been determined. As part of the Nevada Nuclear Waste Storage Investigations Project, we have used infrared spectroscopy to determine hydrogen speciations in three nuclear waste glass compositions (SRL-131 & 165, and PNL 76-68), which were leached at 90{sup 0}C (all glasses) or hydrated in a vapor-saturated atmosphere at 202{sup 0}C (SRL-131 only). Hydroxyl groups were found in the surface layers of all the glasses. Molecular water was found in the surface of SRL-131 and PNL 76-68 glasses that had been leached for several months in deionized water, and in the vapor-hydrated sample. The water/hydroxyl ratio increases with increasing reaction time; molecular water makes up most of the hydrogen in the thick reaction layers on vapor-phase hydrated glass while only hydroxyl occurs in the least reacted samples. Using the known molar absorptivities of water and hydroxyl in silica-rich glass the vapor-phase layer contained 4.8 moles/liter of molecular water, and 0.6 moles water in the form hydroxyl. A 15 {mu}m layer on SRL-131 glass formed by leaching at 90{sup 0}C …

Recognizing the role that semiconductor suppliers can playin meeting energy-efficiency regulations and voluntary specifications,this paper provides an overview of Chinese policies and implementingbodies; a discussion of current programs, their goals, and effectiveness;and possible steps that can be taken tomeet these energy-efficiencyrequirements while also meeting products' high performance and costgoals.

The primary objective of this project is to enhance domestic petroleum production by demonstration and technology transfer of an advanced oil recovery technology in the Paradox basin, southeastern Utah. If this project can demonstrate technical and economic feasibility, the technique can be applied to approximately 100 additional small fields in the Paradox basin alone, and result in increased recovery of 150 to 200 million barrels of oil. This project is designed to characterize five shallow-shelf carbonate reservoirs in the Pennsylvanian (Desmoinesian) Paradox Formation and choose the best candidate for a pilot demonstration project for either a waterflood or carbon dioxide-(CO{sub 2}) flood project. The field demonstration, monitoring of field performance, and associated validation activities will take place in the Paradox basin within the Navajo Nation. The results of this project will be transferred to industry and other researchers through a petroleum extension service, creation of digital databases for distribution, technical workshops and seminars, field trips, technical presentations at national and regional professional meeting, and publication in newsletters and various technical or trade journals. Five activities continued this quarter as part of the geological and reservoir characterization of carbonate mound buildups in the Paradox basin: (1) regional facies evaluation, (2) evaluation …

Transient processes in radiative transfer have recently become of interest in the modeling of astrophysical phenomena, particularly with regard to the brightness of novae, supernovae, and perhaps even galactic clouds adjacent to quasars. Analytic solutions to a particular class of Marshak wave problems are presented with and without the Marshak (Milne) boundary condition. The choice of boundary condition can have a decisive effect on the coupling of radiative energy to the material energy in the vicinity of a material boundary. The analytic solution obtained can be useful as a tool for calibrating numerical calculation techniques.

Twenty-two scientists from around the nation and the world met to discuss the way that the molecules, structures, processes and concepts of the biological world could be used or mimicked in designing novel materials, processes or devices of potential practical significance. The emphasis was on basic research, although the long-term goal is, in addition to increased knowledge, the development of applications to further the mission of the Department of Energy.

Anderman/Smith Operating Co. is operating a secondary oil recovery project involving the Carter sandstone in northwest Alabama. The project objectives are: (1) to increase the ultimate economic recovery of oil from the Carter reservoirs, thereby increasing domestic reserves and lessening US dependence on foreign oil; (2) to extensively model, test, and monitor the reservoirs so their management is optimized; and (3) to assimilate and transfer the information and results gathered to other US oil companies to encourage them to attempt similar projects. As a result of waterflood operations at the Central Buff unit, oil production from the Fowler Brasher 7--9 well increased to 40--50 stb/d in late October, and averaged about 45 stb/d in November with no measurable water production. Production at the Fowler Dodson 8--12 was more erratic during the same period. In October, the oil rate for this well increased to nearly 17 stb/d with no reported water production. However, in November the oil production rate declined to about 9 stb/d with an associated average water rate of nearly 17 bpd. Water analysis showed that this produced water was significantly fresher than the connate water produced prior to waterflood operations. This provides evidence for early breakthrough of water …

None

Multiple current limiting mechanisms exist from the nanometer to millimeter scale in Ag-sheathed (Bi,Pb)-2223 tapes. Recent studies of the zero-field critical current density (J{sub c} (0T, 77K)), the irreversibility field (H*) and the crack microstructure elucidate these properties. We show that H*(77K) can vary significantly over the range {approximately}120-260 mT, independently of J{sub c} (0T, 77K). Cracks, actual or incipient, exist on the sub to several hundred micron scale. Surface magneto optical imaging of whole tapes, correlated to subsequent ultrasonic fracture analysis of. the bare 2223 filaments extracted by dissolving away the Ag shows that even composites having J{sub c} (0T, 77K) values of 60 kA/cm{sup 2} exhibit strong signs of unhealed rolling damage. These combined studies show that today's very best 2223 tapes are still far from full optimization.

Several metals systems were reviewed for their potential to act as resistive temperature devices. Platinum metal was selected as the metal of choice. Platinum was plated onto 5 mil copper wire, and then subsequently coated with Accusol's proprietary ceramic coating. The copper was etched out in an attempt to make a pure platinum, high resistive, resistive-temperature device. The platinum plating on the wire cracked during processing, resulting in a discontinuous layer of platinum, and the element could not be formed in this way.

Intensive animal feeding operations create large amounts of animal waste that must be safely disposed of in order to avoid environmental degradation. Cattle feedlots and chicken houses are two examples. In feedlots, cattle are confined to small pens and fed a high calorie grain diet in preparation for slaughter. In chicken houses, thousands of chickens are kept in close proximity. In both of these operations, millions of tons of manure are produced every year. In this project a co-firing technology is proposed which would use manure that cannot be used for fertilizer, for power generation. Since the animal manure has economic uses as both a fertilizer and as a fuel, it is properly referred to as feedlot biomass (FB) for cow manure, or litter biomass (LB) for chicken manure. The biomass will be used a as a fuel by mixing it with coal in a 90:10 blend and firing it in existing coal fired combustion devices. This technique is known as co-firing, and the high temperatures produced by the coal will allow the biomass to be completely combusted. Therefore, it is the goal of the current research to develop an animal biomass cofiring technology. A cofiring technology is being developed …

Setpoints for nuclear safety-related instrumentation are required for actions determined by the design authorization basis. Minimum requirements need to be established for assuring that setpoints are established and held within specified limits. This document establishes the controlling methodology for changing setpoints of all classifications. The instrumentation under consideration involve the transfer, storage, and volume reduction of radioactive liquid waste in the F- and H-Area High-Level Radioactive Waste Tank Farms. The setpoint document will encompass the PROCESS AREA listed in the Safety Analysis Report (SAR) (DPSTSA-200-10 Sup 18) which includes the diversion box HDB-8 facility. In addition to the PROCESS AREAS listed in the SAR, Building 299-H and the Effluent Transfer Facility (ETF) are also included in the scope.

This project was awarded under U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL) Program Solicitation DE-PS26-02NT41422 and specifically addresses Technical Topical Area 2-Gasification Technologies. The project team includes Enertechnix, Inc. as the main contractor and ConocoPhillips Company as a technical partner, who also provides access to the SG Solutions Gasification Facility (formerly Wabash River Energy Limited), host for the field-testing portion of the research. Since 1989 the U.S. Department of Energy has supported development of advanced coal gasification technology. The Wabash River and TECO IGCC demonstration projects supported by the DOE have demonstrated the ability of these plants to achieve high levels of energy efficiency and extremely low emissions of hazardous pollutants. However, a continuing challenge for this technology is the tradeoff between high carbon conversion which requires operation with high internal gas temperatures, and limited refractory life which is exacerbated by those high operating temperatures. Attempts to control internal gas temperature so as to operate these gasifiers at the optimum temperature have been hampered by the lack of a reliable technology for measuring internal gas temperatures. Thermocouples have serious survival problems and provide useful temperature information for only a few days or weeks after startup before burning …

The goal of this research is to engineer enzymes to be efficient and economically attractive catalysts for the chemical industry. The author is attempting to demonstrate generally-applicable approaches to enzyme improvement as well as develop specific catalysts for potential industrial application. In this report attention is focused on random mutagenesis of pNB esterase -- improved activity and stability. The most thermostable esterases obtained by sequential random mutagenesis (6H7) and random mutagenesis plus recombination (6sF9) each contain 9 amino acid mutations and a number of silent mutations, relative to the wild-type sequence. Eight of the mutations are present in both genes, for a total of ten potentially adaptive mutations. Because several of these mutations occurred in the same generation, it is difficult to identify the mutations responsible for the increases in activity and stability. In order to aid in this identification, the thermostable genes were recombined with the wild-type gene, in hopes of removing neutral mutations. The gene from the first-generation variant, with five amino acid substitutions was also recombined with wild-type.

The price allocation guidelines (PAG) are an integrated set of specific cost targets for several task areas within the Low-cost Solar Array (LSA) Project. PAG is a working tool of LSA Project management designed to provide consistent and meaningful guidelines for costs of polycrystalline silicon material, sheet, cells, encapsulants, and module manufacturing. It is expected that advanced photovoltaic concepts derived from industry and the research community can be developed so that it will be possible by the end of 1982 to demonstrate production processes, all process steps, and prototype equipment required to manufacture flat-plate photovoltaic modules. This demonstration would incorporate production rates and product quality consistent with a specific market price determined by the program. This stage of development has been referred to as Technical Readiness. A goal of $0.70 per peak watt (1980 dollars) has been established for the cost of electricity generated by photovoltaic modules. The processes for producing modules demonstrated to be technically ready must be amenable to scale-up so that this price goal can eventually be achieved in the marketplace. The guidelines described in this document allocate portions of that goal to each module component. Sheet materials derived from the following five technologies are considered: Czochralski, …

Using 226 million B{bar B} events recorded on the {Upsilon}(4S) resonance with the BABAR detector at the SLAC e{sup +}e{sup -} PEP-II storage rings, they reconstruct B{sup -} {yields} D*{sup 0}e{sup -}{bar {nu}}{sub e} decays using the decay chain D*{sup 0} {yields} D{sup 0}{pi}{sup 0} and D{sup 0} {yields} K{sup -} {pi}{sup +}. From the dependence of their differential rate on the w, the dot product of the four-velocities of B{sup -} and D*{sup 0}, and using the form factor description by Caprini et al. with the parameters F(1) and {rho}{sub 1{sub 1}}{sup 2}, they obtain the results {rho}{sub A{sub 1}}{sup 2} = 1.16 {+-} 0.06 {+-} 0.08, F(1) {center_dot} |V{sub cb}| = (35.9 {+-} 0.6 {+-} 1.4) {center_dot} 10{sup -3}, and {beta}(B{sup -} {yields} D*{sup 0} e{sup -}{bar {nu}}{sub e}) = (5.56 {+-} 0.08 {+-} 0.41)%.

The authors present the results of the Integrated Monitoring and Surveillance System (IMSS) demonstration project Phase I efforts. The rationale behind IMSS development is reviewed and progress in each of the 5 basic tasks is detailed. Significant results include decisions to use Echelon LonWorks networking protocol and Microsoft Access for the data system needs, a preliminary design for the plutonium canning system glovebox, identification of facilities and materials available for the demonstration, determination of possibly affected facility documentation, and a preliminary list of available sensor technologies. Recently imposed changes in the overall project schedule and scope are also discussed and budgetary requirements for competition of Phase II presented. The results show that the IMSS demonstration project team has met and in many cases exceeded the commitments made for Phase I deliverables.

A linear induction pump of a special design was used to circulate molten sodium through a mockup of an experimental "overflow" type of sodium-cooled reactor. The distinctive features of this pump are that no seals or moving parts are required: no piping is required to carry sodium to the pump or away from it because the pump is mounted directly on the reactor vessel, with the windings outside of the vessel and the magnetic flux return path inside the vessel. The pump develops 342 gpm at 6.2 psi when pumping sodium at 600 deg F with an efficiency of 4.7%. (auth)

The present article is the continuation of the earlier work, which used the world sheet representation and the mean field approximation to sum planar graphs in massless {phi}{sup 3} field theory. The authors improve on the previous work in two respects: A prefactor in the world sheet propagator that had been neglected is now taken into account. In addition, they introduce a non-zero bare mass for the field {phi}. Working with a theory with cutoff and using the mean field approximation, they find that, depending on the range of values of the mass and coupling constant, the model has two phases: A string forming phase and a perturbative field theory phase. They also find the generation of a new degree of freedom, which was not in the model originally. This new degree of freedom can be thought of as the string slope, which is now promoted into a fluctuating dynamical variable. Finally, they show that the introduction of the bare mass makes it possible to renormalize the model.

Progress toward the construction of high density genetic maps of chromosomes 17 and X has been made by isolating and characterizing a relatively large set of polymorphic probes for each chromosome and using these probes to construct genetic maps. We have mapped the same polymorphic probes against a series of chromosome breakpoints on X and 17. The probes could be assigned to over 30 physical intervals on the X chromosome and 7 intervals on 17. In many cases, this process resulted in improved characterization of the relative locations of the breakpoints with respect to each other and the definition of new physical intervals. The strategy for isolation of the polymorphic clones utilized chromosome specific libraries of 1--15 kb segments from each of the two chromosomes. From these libraries, clones were screened for those detecting restriction fragment length polymorphisms. The markers were further characterized, the chromosomal assignments confirmed and in most cases segments of the original probes were subcloned into plasmids to produce probes with improved signal to noise ratios for use in the genetic marker studies. The linkage studies utilize the CEPH reference families and other well-characterized families in our collection which have been used for genetic disease linkage work. …