The condition for extracting a maximum negative ion current density is found when the product of the radius of the negative ion conversion electrode, the cross-section for negative and positive ion recombination, and the density of positive ions in the ion source equals one. The optimum output is obtained at the highest positive ion density and the smallest electrode radius.

The measurement of the following thermophysical properties of Utah tar sands is in progress: thermal conductivity, specific heat relative permeability, and viscosity (of the recovered bitumen). During the report period (October 1, 1978 to November 1, 1979), experimental procedures have been developed and a basic data set has been measured. Additionally, standard core analysis has been performed for four drill sites in the Asphalt Ridge, Utah area.

A method and a cutter are disclosed for producing a large cavity filled with a uniform bed of rubblized oil shale or other material, for in-situ processing. A raise drill head has a hollow body with a generally circular base and sloping upper surface. A hollow shaft extends from the hollow body. Cutter teeth are mounted on the upper surface of the body and relatively small holes are formed in the body between the cutter teeth. Relatively large peripheral flutes around the body allow material to drop below the drill head. A pilot hole is drilled into the oil shale deposit. The pilot hole is reamed into a large diameter hole by means of a large diameter raise drill head or cutter to produce a cavity filled with rubble. A flushing fluid, such as air, is circulated through the pilot hole during the reaming operation to remove fines through the raise drill, thereby removing sufficient material to create sufficient void space, and allowing the larger particles to fill the cavity and provide a uniform bed of rubblized oil shale.

As originally designed and operated, protons entering PW6 were steered by a series of EPB dipoles into a single interaction length beryllium target, some 43 feet from the enclosure wall. Ensuing secondary beams, either p{sup +}/{pi}{sup +} or p{sup -}/{pi}{sup -}, were collected by a string of quadrupoles following the target, steered westward, away from the Proton Center line, through PW6 and PW7, and ultimately focussed on experiment production targets located within the large PW8 hall. Around the Spring of 1988 it was decided to upgrade the existing Proton West secondary beamline to allow for transport of a primary proton beam, anticipated to be either 800 or 900 GeV/c, through PW8. This upgrade project, which is now nearing completion, was largely motivated by the then recent approval of E-771, a hadronic beauty production experiment located in PW8. E-771 represents the third in a series of experiments for the large-acceptance dimuon spectrometer presently located at the end of the Proton West beamline. This Technical Memo is a summary of the upgrade --- an explanation of the underlying strategy and a documentation of the final locations of the secondary beamline elements. 6 refs., 2 figs., 2 tabs.

A detailed model for the dynamic resistivity of an exploding conductor presents many difficulties. An electrically-exploded conductor undergoes significant hydrodynamic expansion as it is heated. Resistivity is a function of both the temperature and density of a conductor and realistic models for resistivity over the range of parameter space experienced by an exploding conductor are quite complex. See for example, the model of Lee and More (1984). Calculation of the hydrodynamic expansion of the conductor during and subsequent to the explosion is likewise dependent on detailed knowledge of the equation of state for the conductor in a range where few experimental data exist. A further complication is the strong magnetic field which couples the hydrodynamic expansion to the currents flowing in the expanding material. In spite of the difficulties, progress is being made on detailed modeling of fuses and exploding conductors (Lidemuth and co-workers, 1985). A simpler approach has proved to be quite useful for modeling the electrical behavior of exploding bridgewire and slapper detonators and for modeling the explosionss of large conductors exploded with large capacitor banks. In the work described here, a simple, empirical model was developed which can be expressed as a closed-form algebraic expression involving four …

The objective of this program has been to study the chemistry of the components with high boiling points in a direct coal liquefaction recycle solvent and to identify those components which lead to higher overall yields and improved product stability in the initial coal dissolution step of direct coal liquefaction processes. The major conclusions are: -454 C recycle solvent is primarily aromatic hydrocarbons (73%) and contains almost no asphaltenes; +454 C recycle solvent is primarily asphaltenes and aromatic hydrocarbons; recycle solvent also contains aliphatic hydrocarbons, N-containing aromatics and O-containing aromatics; heteroatoms in coal derived materials seem to be grouped by type, i.e. acidic O and basic N and sulfur occur together; under helium a small net amount of hydrogen and more CO and CO/sub 2/ are produced than under hydrogen; under hydrogen the amounts of H/sub 2/S and hydrocarbon gases are increased and a small amount of hydrogen gas is usually consumed; overall coal conversions to THF solubles are improved by adding more -454 C solvent but decreased by adding +454 C solvent; for added fractions of -454 C solvent the pecent conversion to THF solubles increases in the order aromatic hydrocarbons (+7.2) > aliphatic hydrocarbons (+0.8) > no added …

Several types of radiation measurements were performed on the Beta II compact forms experiment. Among these are time integrated spectra ranging in wavelength from the vuv to the uv, time resolved bolometer measurements of radiation from the x-ray to the infrared, and time and wavelength resolved measurements of certain spectral lines. It is difficult to relate any one of these measurements to plasma parameters of interest such as temperature, density, or impurity content. In this report we compare the results of these, and other measurements with two simple models of the power balance in the plasma in order to estimate the effect of carbon and oxygen impurities on plasma lifetime.

Time-series analysis techniques are applied to nuclear reactor thermocouple data to investigate coolant temperatures measured within the fueled test assembly. The coolant temperature distribution within a fuel assembly affects the length of time a fuel assembly may be operated in a power reactor and, therefore, is an important economic consideration in the design of reactor fuel systems. Frequency-domain signal conditioning techniques were used to reveal the smoothly varying thermocouple signals from the noisy digital data. Examination of the cross-correlation function for thermocouple pairs suggested an alternate surging and ebbing of coolant flow within certain zones of the fuel assembly. These zones corresponded to thermocouples which experienced higher or lower than predicted coolant temperatures. This time series analysis contributed greatly toward the understanding of fuel assembly thermal hydraulics.

Americium is separated from mixtures containing plutonium, other actinides, and other non-lanthamide impurities, by a combined process of anion exchange resin sorption to remove plutonium, and a bidentate organophosphorus solvent extraction of americium of the anion exchange resin effluent. Dihexyl-N,N-diethylcarbamylmethylenephosphonate is a preferred solvent. The initial mixture may be subjected to a cation exchange operation to remove monovalent impurities. The process is especially effective when aluminum, zinc, lead, and copper are present in significant quantities in the original mixture.

Radiation levels inside the final focus alcoves are calculated from the main dump, tune-up dumps, and adjustable collimators. Neutron calculations are done for giant resonance neutrons. Fluences of neutrons and photons in the alcoves are determined. It is concluded that, if the beam losses do indeed occur as believed, many of the electronic components in the alcoves will begin to fail after a very short running period. (LEW)

The impact of DOE's Current Federal Program on the commercialization of hydrothermal resources between 1980 and 2000 is analyzed. The hydrothermal resources of the United States and the types of DOE activities used to stimulate the development of these resources for both electric power and direct heat use are described briefly. The No Federal Program and the Current Federal Program are then described in terms of funding levels and the resultant market penetration estimates through 2000. These market penetration estimates are also compared to other geothermal utilization forecasts. The direct benefits of the Current Federal Program are next presented for electric power and direct heat use applications. An analysis of the external impacts associated with the additional hydrothermal resource development resulting from the Current Federal Program is also provided. Included are environmental effects, national security/balance-of-payments improvements, socioeconomic impacts and materials requirements. A summary of the analysis integrating the direct benefits, external impacts and DOE program costs concludes the report.

A system and method are provided for controlling the storing and release of thermal energy from a thermal storage wall wherein said wall is capable of storing thermal energy from insolation. The system and method includes a device such as a plurality of louvers spaced a predetermined distance from the thermal wall for regulating the release of thermal energy from the thermal wall. This regulating device is made from a material which is substantially transparent to the incoming solar radiation so that when it is in any operative position, the thermal storage wall substantially receives all of the impacting solar radiation. The material in the regulating device is further capable of being substantially opaque to thermal energy so that when the device is substantially closed, thermal release of energy from the storage wall is substantially minimized. An adjustment device is interconnected with the regulating mechanism for selectively opening and closing it in order to regulate the release of thermal energy from the wall.

An analysis of a target factory leading to the determination of production expressions has provided for the basis of a parametric study. Parameters involving the input and output rate of a process system, processing yield factors, and multiple processing steps and production lines have been used to develop an understanding of their dependence on the rate of target injection for laser fusion. Preliminary results have indicated that a parametric study of this type will be important in the selection of processing methods to be used in the final production scheme of a target factory.

The Lawrence Livermore National Laboratory (LLNL) has an active interest in the synthesis of new polysiloxanes as base polymers for cellular silicone materials. These elastomers have properties uniquely suited to very specific engineering requirements. While the polymers which we have prepared via random equilibrium of various cyclic tetrasiloxanes have adequate properties for certain applications, there is evidence to suggest that alternating block polysiloxanes prepared via condensation-polymerization techniques have properties more suited to our end uses as flexible foam materials (cushions). The synthetic sequence developed to prepare these materials involves reactions of functionally terminated (silylamino and silanol) polysiloxane oligomers to produce alternating multiblock (ABAB...) materials of high molecular weight. Dialkylamines are condensation byproducts in this reaction. The analysis and characterization of these multiblock polymers is reported.

The atomic and molecular processes that play a principal role in negative ion formation in a hydrogen negative ion discharge are discussed. The collisions of energetic electrons with gas molecules within the discharge lead to vibrationally excited molecules. Thermal electrons in turn attach to these excited molecules and generate negative ions via the dissociative attachment process. A system geometry chosen to optimize these collision processes is discussed that consists of a high-power discharge in tandem with a low electron temperature bath, the two regions separated by a magnetic filter. The current density extracted from such a system is found to scale inversely with the system scale length provided the gas density and electron density are also increased inversely with scale length. If a system is scaled downward in size to provide a new beamlet but one with increased current density, and these beamlets are packed to fill the original dimension, the new total extracted current will exceed the original total current by the scale factor. The emittance, epsilon, of the new system remains unchanged. The brightness, J/epsilon/sup 2/, of the new system will also be increased in proportion to the scale factor. 4 refs., 2 figs.

Transposable elements have long been associated with certain unstable loci in maize and have been intensively studied by McClintock and others. It is known that a transposable element can control the expression of the structural genes at the locus where it resides. These controlling elements in maize are now beginning to be studied at the molecular level. Using recombinant molecular probes we have been able to describe the changes induced by the controlling element Ds at the shrunken locus. Ds elements appear to be large and dissimilar insertions into the wild-type locus - two elements actually map within the transcribed region of the gene. Genetic instabilities have been described in other economically important plants but the bases for these phenomena have not been understood. We believe that it is likely that some of these instabilities are the result of transposable element activity much as in the case of maize.

Different aspects of radiation damage in both synthetic NaCl crystals and various natural rock salt samples as well as granite, basalt and other minerals which will be important for radioactive waste disposal applications are being investigated. The principal means of measuring radiation damage is the determination of F-center concentrations, and the concentration and size of sodium metal colloid particles. Formation of these and other defects during irradiation and the annealing of defects and characterization of other processes occurring after irradiation are being studied as a function of dose rate, total dose, sample temperature during irradiation, strain applied prior to and during irradiation, etc. Measurements are being made on synthetic NaCl and natural rock salt samples from different geological locations, including some potential repository sites. It will be necessary to determine if radiation damage in the minerals from different localities is similar. If non-negligible differences are observed a detailed study must be made for each locality under consideration. Almost all current studies are being made on rock salt but other minerals particularly granite and basalt are being phased into the program. It is now established that radiation damage formation in both natural and synthetic rock salt is strongly dependent on strain. …

We present the first detailed investigations of the ablative acceleration of planar targets while simultaneously using high irradiance (10/sup 14/ W/cm/sup 2/), large focal diameters (1 mm) and long laser pulse duration (3 nsec). Included are measurements of target preheat, ablation pressures and uniformity achieved under these conditions. Targets were accelerated to high velocities with velocity profile uniformity approaching that required for high gain pellet implosions.

The nature of the electrical discharge has an obvious impact upon the gas efficiency of an ion source and on the current density whch can be drawn from it. However external factors, such as the conductance of the grids and the background pressure along the beamline, also have an effect. Simple approximations based upon these factors show that there is a lower limit to the pressure of an ion source, which can deliver an ion beam of given current density at a specific gas efficiency. Estimates of ion stripping losses in a double gridded structure show that for all practical purposes, there is an upper limit as well.

The use of magnetic switches to generate high power pulses has opened up a whole new spectrum of possibilities. Here we describe an investigation into the maximum repetition rates possible with these devices.

X-ray beams emerging from the new SLAC electron-positron storage ring (PEP) impinge on the entrance to tangential divertor channels causing highly localized heating in the channel structure. Analyses were completed to determine the temperatures and thermally-induced stresses due to this heating. These parts are cooled with water flowing axially over them at 30/sup 0/C. The current design and operating conditions should result in the entrance to the new divertor channel operating at a peak temperature of 123/sup 0/C with a peak thermal stress at 91% of yield. Any micro-cracks that form due to thermally-induced stresses should not propagate to the coolant wall nor form a path for the coolant to leak into the storage ring vacuum. 34 figs., 4 tabs.

The evaluation of background levels at the SLC relies, in several cases, on the proper representation of how low momentum electrons propagate through the Arcs and the Final Focus System (FFS). For example, beam - gas bremsstrahlung in the arcs causes electrons of up to 6% energy loss to be transported through to the IP; secondary showers on edges of masks and collimators yield debris with a very wide momentum spectrum. This note is a naive attempt at checking the validity of TRANSPORT and TURTLE calculations, by evaluating the contributions of the momentum terms to increasingly higher order, and checking the mutual consistency of the results produced by the two methods on a beam of wide momentum spread. 8 refs., 4 figs., 1 tab.

We report on the non-negligible energy generation from the {sup 13}C neutron source and neutron capture reactions in low mass, low metallicity AGB stars. About 10{sup 4} L{sub {circle dot}} are generated within the thermal pulse convective shell by the combination of the {sup 13}C({alpha}, n){sup 16}O rate and the sum of the Y(Z,A)(n,{gamma})Y(Z,A + 1) reactions and beta decays. The inclusion of this energy source in an AGB thermal pulse evolution is shown to alter the evolution of the convective shell boundaries, and, hence, how the {sup 13}C is ingested into the convective shell. Also, the duration of the pulse itself is reduced by the additional energy input. The nucleosynthetic consequences are discussed for these evolutionary changes. 17 refs., 5 figs.

The longitudinal and transverse spin fluctuations in Ni have been measured below {Tc} by means of polarized neutron scattering in the momentum range 0.06 < q < 0.18 {angstrom}{sup -1}. In transverse scans spin wave peaks at E{sub q} = Dq{sup 2} appear as expected from early measurements performed with unpolarized neutrons. The longitudinal magnetic scattering {sub {chi}L}(q, E), on the other hand, is quasielastic without any signature of inelastic peaks near E{sub q}. The q and T dependences of {sub {chi}L}(q, E) resemble the paramagnetic scattering above {Tc}, i.e., the linewidth is roughly proportional to q{sup 2.5} and the integrated intensity I(q) is proportional to (q{sup 2} + {kappa}{sub z}{sup 2}){sup -1}. 8 refs., 3 figs.