Molecular dynamics is employed to study the low energy states of a beam of charged particles subject to circumferentially varying guiding and focusing forces and with Coulomb forces between the particles. In a constant gradient ring, the lowest energy state is never ordered, but in an alternating gradient structure, operating below the transition energy, the lowest state is ordered. The nature and characteristics of the ground state depends upon the beam density and the ring parameters. For zero temperature the crystal remains intact for a very long time, but at nonzero temperatures it gains energy from the lattice. A critical temperature exists above which the crystal melts rapidly.

Enclosed are proceedings of the workshop on Internal Dosimetry held on Atlanta, Georgia in April 1992. The recommendations from the Workshop were considered by the CIRRPC Subpanel on Occupational Radiation Protection Research in identifying those areas to be undertaken by individual Federal Agencies or in cooperative efforts. This document presents summaries of the following sessions: A.1 Applications and limitations of ICRP and other metabolic models, A.2 Applications and implementation of proposed ICRP lung model, A.3 Estimates of intake from repetitive bioassay data, A.4 Chelation models for plutonium urinalysis data, B.1 Transuranium/uranium registry data, B.2 Autopsy tissue analysis, B.3 Bioassay / Whole body counting, B.4 Data base formatting and availability, C.1 An overview of calculational techniques in use today, C.2 The perfect code, C.3 Dose calculations based on individuals instead of averages, C.4 From macro dosimetry to micro dosimetry.

This document provides the functional design criteria required for the Phase 2 Liquid Effluent Treatment and Disposal Project, Project W-252. Project W-252 shall provide new facilities and existing facility modifications required to implement Best Available Technology/All Known, Available, and Reasonable Methods of Prevention, Control, and Treatment (BAT/AKART) for the 200 East Phase II Liquid Effluent Streams. The project will also provide a 200 East Area Phase II Effluent Collection System (PTECS) for connection to a disposal system for relevant effluent streams to which BAT/AKART has been applied. Liquid wastestreams generated in the 200 East Area are currently discharged to the soil column. Included in these wastestreams are cooling water, steam condensate, raw water, and sanitary wastewaters. It is the policy of the DOE that the use of soil columns to treat and retain radionuclides and nonradioactive contaminants be discontinued at the earliest practical time in favor of wastewater treatment and waste minimization. In 1989, the DOE entered into an interagency agreement with Ecology and EPA. This agreement is referred to as the Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement). Project W-252 is one of the projects required to achieve the milestones set forth in the Tri-Party Agreement. One …

This User`s Guide describes the installation and use of the Meta- Transport Library protocol base classes. This software package includes the full source code for the implementation, as well as man pages and appropriate documents. The fully built MTL is a C++ library file that is linked into derived protocol code.

None

The Xpress Transfer Protocol (XTP) is a transport layer protocol designed to provide a wide range of communication services built on the concept that orthogonal protocol mechanisms can be combined to produce appropriate paradigms within the same basic framework. Rather than using a separate protocol for each type of communication, XTP`s protocol options and control of the packet exchange patterns allow the application to create appropriate paradigms such as unreliable datagrams, unreliable arbitrarily long datagrams, reliable datagrams, transactions, unreliable streams, reliable connections, and many others. Error control, flow control, and rate control are each configured to the needs of the communication. SandiaXTP is an object oriented implementation of XTP 3.7. The core of base classes used in SandiaXTP come from the Meta-Transport Library software. The SandiaXTP implementation of XTP 3.7 is a user space daemon. User`s application code makes request of the daemon, and the daemon satisfies them. This User`s Guide describes the installation and use of the SandiaXTP object-oriented implementation of XTP 3.7. The software package includes the full source code for the implementation, as well as man pages and appropriate documents. The fully built SandiaXTP is a user-space daemon that implements XTP 3.7.

High Level Waste (HLW) generated during Separations processing in the F- and H-Canyons is transferred to the Tank Farms for stage in 51 underground, million gallon storage tanks. The waste is an aqueous solution containing dissolved sodium salts and insoluble metal oxides/hydroxides. The waste solution is evaporated to reduce the volume, and the resulting saltcake and residual supernate are stored. Over the 40 year history of the Tank Farm, routine supernate sampling has been conducted in support of the primary goal of safe storage of HLW. As a result of routine and non-routine activities that are part of managing these highly radioactive wastes, secondary solid waste is generated. Radioactive contamination of over 90% of the solid waste generated is due to contact with BLW supernate or saltcake. In order to comply with the Waste Acceptance Criteria (WAC) for of solid waste in the E-Area Vaults (EAV), the quantity of certain radioisotopes must be manifested for each waste container and a declaration made of whether or not the waste is hazardous. However, solid waste is not amenable to routine analysis, this forces a reliance on analytical data from supernate samples to characterize the contamination. To provide the manifest information, process knowledge …

Fusion reactions in an inertial-confinement fusion (ICF) target filled with deuterium or a deuterium/tritium fuel release nearly monoenergetic neutrons. Because most the neutrons leave the compressed target without collision, they preserve reaction-rate information as they travel radially outward from their point of origin. Three fast, neutron detector techniques, each capable of measuring the fusion reaction-rate of ICF targets, have been demonstrated. The most advanced detector is based on the fast rise-time of a commercial plastic scintillator material (BC-422) which acts as a neutron-to-light converter. Signals, which are recorded with a fast optical streak camera, have a resolution of 25 ps. Good signals can be recorded for targets producing only 5 x 10{sup 7} DT neutrons. Two other detectors use knock-on collisions between neutrons and protons in a thin polyethylene (CH{sub 2}) converter. In one, the converter is placed in front of the photocathode of an x-ray streak camera. Recoil protons pass through the photocathode and knock out electrons which are accelerated and deflected to produce a signal. Resolutions < 25 ps are possible. In the other, the converter is placed in front of a microchannel plate (MCP) with a gated microstrip. Recoil protons eject electrons from the gold layer forming …

Electric vehicles (EVs) can reduce greenhouse gas emissions, relative to emissions from gasoline-fueled vehicles. However, those studies have not considered all aspects that determine greenhouse gas emissions from both gasoline vehicles (GVs) and EVs. Aspects often overlooked include variations in vehicle trip characteristics, inclusion of all greenhouse gases, and vehicle total fuel cycle. In this paper, we estimate greenhouse gas emission reductions for EVs, including these important aspects. We select four US cities (Boston, Chicago, Los Angeles, and Washington, D.C.) and six countries (Australia, France, Japan, Norway, the United Kingdom, and the United States) and analyze greenhouse emission impacts of EVs in each city or country. We also select six driving cycles developed around the world (i.e., the US federal urban driving cycle, the Economic Community of Europe cycle 15, the Japanese 10-mode cycle, the Los Angeles 92 cycle, the New York City cycle, and the Sydney cycle). Note that we have not analyzed EVs in high-speed driving (e.g., highway driving), where the results would be less favorable to EVs; here, EVs are regarded as urban vehicles only. We choose one specific driving cycle for a given city or country and estimate the energy consumption of four-passenger compact electric and …

The Evaporator Pot Temperature Instrumentations and the Steam Condensate Gamma Monitors are two instrumentation systems in the 2H Evaporator facilities that are classified as the critical protection. The temperature high alarm and interlock circuit and the temperature recorder circuit of the pot temperature instrumentation loop are described. From the gamma monitor loop, the high gamma alarm and interlock circuit, failure alarm and interlock circuit, cesium activity recorder circuit, and americium activity recorder circuit are described. (GHH)

The purpose of this document is to provide an initial, rough order of magnitude, evaluation of the relationship between the concentrations of selected radionuclides in process streams of a chemical process plant and the required degree of protective features for plant operations personnel. The evaluation provided in this document specifies ``trigger level`` concentrations of {sup 90}Sr, {sup 137}Cs, and transuranics (TRU) for ``contact maintenance`` activities. Concentrations above the ``trigger levels`` can be accommodated provided offsetting design features are incorporated (e.g., improved shielding partial to total confinement, etc.). This information will assist in defining the degree of reduction of concentrations of radionuclides required for the feed used in a low-level liquid waste processing plant to utilize a contact maintenance design concept. Offsetting design features that influence maintenance personnel exposures in a contact maintenance situation are identified. All concentrations are expressed in terms of actual process fluids before any flushing and decontamination steps.

The relation of structure to lack of superconductivity in Pr-Ba-Cu-O was systematically investigated. First, the phase equilibria of this system was studied to find the processing parameters which maximize the cation-site ordering between Pr and Ba ions. Second, a comparative study between superconducting Nd-Ba-Cu-0 and non- superconducting Pr-Ba-Cu-0 was performed by forming solid-solution Nd- Pr-Ba-Cu-0. The relation between structure and superconductivity in Nd{sub 1{minus}x}Pr{sub x}Ba{sub 2}Cu{sub 3}O{sub 7{minus}{delta}} is investigated. {Tc} decreases monotonically with increasing {times} and superconductivity disappears at around x=0.3-0.4. {Tc} is enhanced by 10K when the sample is processed at an oxygen partial pressure (PO{sub 2}) of 0.01 atm, followed by oxygenation at 450C. Depression of {Tc} as a function of {times} and PO {sub 2} is explained in terms of a charge-transfer model. It is suggested that destruction of superconductivity in the RE{sub 1{minus}x}Pr{sub x}Ba{sub 2}CU{sub 3}O{sub 7{minus}{delta}} (RE=rare-earth) system can be viewed as disruption of four-fold planar coordinated Cu ions in the chain-site due to permanent occupation of extra Pr ions on Ba sites.

The project establishes the necessary experiment and laboratory facilities at Xavier University. This phase of the work has taken a considerable amount of time, due to the limited laboratory space and the involved administrative policies and procedures in procuring the necessary chemicals, glassware and auxiliary supplies. Though there still remain some minor problems with space, the laboratory is now equipped for preparation of catalysts. During this period, the authors focused their attention toward analyzing the magnetic nature of extensively used trimetallic catalyst system Cu-Co-Cr for the production of higher alcohols. The authors decided to investigate the effect of method of preparation and intermetallic ratio on the magnetic behavior of the system.

Kinetic data for elimination of silylene supports formation of a ``tighter`` transition state, indicating a silacyclopropene intermediate. This extends the silacyclopropene mechanism to the cyclicdialkyne system and validates the consistency of the mechanism for silylakynes, in general. Investigation into the other possible silacyclopropene product established the instability of the product. The work with silylketenes proved that an inherent difference exists between reactivity of monosilyl-substituted ketenes and polysilyl-substituted ketenes. Although the mechanism for thermal decomposition of bis(silyl)ketenes can be modified to account for the unexpected silylene elimination products, reasons for the difference are limited to speculation. The photochemistry of silylketenes has not been previously studied, so a model system does not exist for comparison with our polysilylketene work. The photochemical experimentation suggests that the photochemistry and thermochemistry of polysilylketenes is not the same. A more extensive study of the mechanism of the systems covered in this research as well as with monosilyl-substituted systems is needed.

Several pumping mechanisms have been suggested for x-ray lasers including collisional excitation, recombination, photo-ionization and photo-pumping. The success of photo-pumping as an x-ray laser scheme hinges on sufficient overlap of the emission and adsorption lines. For such a scheme to exhibit gain, the difference of the energies of the two lines must be within the line widths determined by the plasma dynamics, such as Doppler and opacity broadening. Typically, an overlap of a few parts in 10{sup 4} is required. Due to correlation effects, high-n levels of multi-electron ions are difficult to calculate and are reliable to roughly a part in 10{sup 3}. These differences are large enough to preclude accurate predictions of successful overlaps. As a result, precise measurements of the overlaps are needed. The continued interest in photo-pumping schemes lies in its potential to improve the laser output. It also allows the excitation of lasing transitions not accessible to other mechanisms and thus to the test laser kinetics from a different perspective. We have studied several such photo-pumping schemes at the LLNL electron beam ion trap. The N-like isoelectronic sequence 3d-5f and 3d-6f transitions were studied for photo-pumping by He-like ions, the Ne-like 2p-4d transitions were studied for …

Mechanisms and associated energetics for adatom diffusion on the (100) and (110) surfaces of Ni, Cu, Rh, Pd, and Ag are investigated. Self-diffusion was studied on (100) and (I 10) surfaces of Ni, Cu, Pd and Ag using corrected effective medium method (CEM) and approximation to CEM used for molecular dynamics and Monte Carlo studies (MD/MC-CEM). Self-diffusion on Pd(100), Ag(100), Ni(110), Cu(110), Pd(110), and Ag(110) is accomplished by classical diffusion: the adatom hops from its equilibrium adsorption site over an intervening bridge site to an adjacent equilibrium site. Self-diffusion on Ni(100) and Cu(100) proceeds by atomic-exchange diffusion: the adatom on the surface displaces an atom in the first surface layer. Aside from explicit inclusion of the kinetic-exchange-correlation energy, it is critical to include enough movable atoms in the calculation to insure correct energetics. Distortions induced by these diffusion mechanisms, especially atomic exchange, are long ranged in surface plane, owing to small distortions of many atoms being energetically favored over large distortions of few atoms. Energetics and rates of heterogeneous adatom diffusion on the (100) surfaces of Ni, Cu, Rh, Pd, and Ag show that the final state energies differ due to variation of metallic bonding with coordination for different types …

Goal of the work was to develop computer models of organic aerogel structures, and to study transport process within these materials. During the course of the research understanding of the structure of all aerogels including acid and neutral-catalyzed silica aerogel was developed. The modeling of transport focused on fluid flow in aerogels. We successfully modified a novel state-of-the-art lattice Boltzmann code to simulate flow at low Knudsen number, and developed a simple molecular dynamics code for gas flow at extremely high Knudsen number (low density). These flow-modeling techniques can be used to study aerogel applications for technology transfer; in addition, these techniques can be used to study flow through other porous materials.

Role of H spillover to the silica support was studied using chemisorption; a strongly bound component of spilled over H was found in the silica support which interfered with accurate measurements of active metal sites via volumetric strong H chemisorption. The volumetric chemisorption technique was modified so that measurement times were reduced from 12--36 h to 1 h. The active Ru surface was characterized means of changes in proton spin counts and NMR Knight shifts vs alkali loading. Na, K blocked the active surface of Ru metal, but Cs was pushed off by H chemisorption. The alkali promoters restricted H mobility on both metal surface and at the metal support interfaces; this is consistent with effects on Fischer-Tropsch synthesis. {sup 1}H NMR was used to study the effect of the active metal and promoter on support hydroxyl groups. The OH group density in the silica support decreased with metal and/or promoter loading, but not on a one-to-one basis; the exchange efficiency of the hydroxyls decreased with atomic size of the alkali metal. An additional downfield proton resonance was detected which was assigned to the alkali hydroxide species in the support.

The Pacific Northwest Laboratory conducted a bench-scale treatability study on a pluto crib soil sample from 100 Area of the Hanford Site. The objective of this study was to evaluate the use of physical separation (wet sieving), treatment processes (attrition scrubbing, and autogenous surface grinding), and chemical extraction methods as a means of separating radioactively-contaminated soil fractions from uncontaminated soil fractions. The soil washing treatability study was conducted on a soil sample from the 116-F-4 Pluto Crib that had been dug up as part of an excavation treatability study. Trace element analyses of this soil showed no elevated concentrations above typically uncontaminated soil background levels. Data on the distribution of radionuclide in various size fractions indicated that the soil-washing tests should be focused on the gravel and sand fractions of the 116-F-4 soil. The radionuclide data also showed that {sup 137}Cs was the only contaminant in this soil that exceeded the test performance goal (TPG). Therefore, the effectiveness of subsequent soil-washing tests for 116-F-4 soil was evaluated on the basis of activity attenuation of {sup 137}Cs in the gravel- and sand-size fractions.

Martin Marietta Specialty Components, Inc., and the US Department of Energy are committed to successfully administering a high quality Environmental Management Program at the Pinellas Plant in Pinellas County, Florida. Part of this commitment includes accurately documenting and communicating to the Pinellas Plant stakeholder the results of their environmental compliance and monitoring activities. The Annual Site Environmental Report presents a comprehensive summary of the results of the environmental monitoring, waste management, and environmental restoration programs at the Pinellas Plant for 1993. This report also includes the plant`s performance in the areas of compliance with applicable regulatory requirements and standards and identifies major environmental management program initiatives and accomplishments for 1993.

The initial technical goal in the project was to develop a chemical method for the cost effective removal of both inorganic and organic sulfur from Ohio coals. Verifying and using a process of reacting ethanol vapors with coal under conditions disclosed in U.S. Patent 4,888,029, the immediate technical objectives were to convert a small scale laborative batch process to a larger scale continuous process which can serve as the basis for commercial development of the technology. This involved getting as much information as possible from small scale batch autoclave or fluid bed laboratory reactors for use in pilot plant studies. The laboratory data included material balances on the coal and sulfur, temperature and pressure ranges for the reaction, minimum reaction times at different conditions, the effectiveness of different activators such as oxygen and nitric oxide, the amount and nature of by-products such as sulfur dioxide, hydrogen sulfide and acetaldehyde, the effect of coal particle size on the speed and completeness of the reaction, and the effectiveness of the reaction on different Ohio coals. Because the laboratory experiments using the method disclosed in U.S. 4,888,029 were not successful, the objective for the project was changed to develop a new laboratory process …

An in situ investigation of the dissolution behavior of duplex stainless steel has been carried out in acidic solutions containing 2.0 M HCl with 2.0 M H{sub 2}SO{sub 4} to determine differences in dissolution rates of the austenitic and ferritic phases. The current density distribution over the dissolving steel surface was measured using a vibrating electrode. The study demonstrated that this technique could quantify the differences in dissolution rates of the austenitic and ferritic phases under the conditions tested. The dissolution rates for the two phases peak at different potentials resulting in multiple current maxima. In addition, transients in dissolution behavior of the two phases at different potentials were observed using optical microscopy. Electron microscopy of the dissolved surface showed very high levels of aluminum and silicon enrichment on the austenitic phase.

This work focuses on substrate morphology and on fragments synthesized by thermal, electron, and photon activation. The following work is complete: (1) Low energy electron diffraction, Auger electron spectroscopy and scanning tunneling microscopy were used to determine the local morphology of rhodium films on titania. (2) A new tool was developed for diagnosing surface reactions that involve C-H bond cleavage -- predosed oxygen TPD (POTPD), a technique based on scavenging surface H(a) by small amounts of preadsorbed 0(a) to form water. (4) For {pi}-bonded benzene on Ag(111), exposure to low energy electrons results in selective decomposition Of C{sub 6}D{sub 6}(a) to surface D atoms and phenyl fragments, which recombine and desorb as biphenyl between 275-390 K. Similarly, vinyl fragments have been prepared from ethylene. These fragments open the way for kinetic and spectroscopic characterization of interesting hydrocarbon reactions on transition metals. (5) Using Fourier transform infra-red spectroscopy, we have studied how coadsorbates, particularly carbon monoxide, inhibit the decomposition of ethylidyne. The experiments were done in an ambient pressure of CO in order to maintain a sizable coverage into the temperature regime where ethylidyne normally decomposes. One aspect of our present work involves morphological studies of Rh on planar TiO{sub 2} …

The objective of this project is to increase the oil production and reserves in the Uinta Basin, Utah, by demonstration of improved completion techniques in the Bluebell field. Low productivity is attributed to gross production intervals of several thousand feet that contain perforated thief zones, water-bearing zones, and unperforated oil-bearing intervals. Geologic and engineering characterization and computer simulation of the Tertiary Green River and Wasatch Formations in the Bluebell field will determine reservoir heterogeneities related to fractures and depositional trends. This phase will be followed by drilling and recompletion of several wells to demonstrate improved completion techniques based on the reservoir characterization. Transfer of the project results will be an ongoing component of the project. Technical progress is described for: outcrop studies of the Green River Formation; subsurface studies of the Bluebell field; and engineering studies of the reservoirs in the Green River Formation and the Wasatch Formation.