Report presenting steady straight-and-level and steady turning tracking runs against an aerial target using an F-51H airplane equipped with a fixed optical sight and with various combinations of maneuvering stick-force and stick-deflection gradients. Results regarding aim wander, elevator movement, and stick-force variation for various test conditions are provided.

An extensive investigation of the changes of the local and mean heat-transfer coefficients along the pipe length, and some results.

Report discussing an investigation to determine the effects of changes in aspect ratio and tail height on the longitudinal stability characteristics of a model with a 32.6-degree sweptback wing. The effects of a leading-edge discontinuity were also examined.

Report presenting an investigation to determine the effects of location of bodies (finned and unfinned) on the aerodynamic characteristics of unswept- and swept-wing--fuselage models and to determine the aerodynamic loads on the bodies in the presence of the wings. Results for the complete model characteristics and for the body are provided.

A low-speed wind-tunnel investigation has been made of some aspects of the aerodynamic problems associated with the use of air-to-air missiles when carried externally on aircraft. Measurements of the forces and moments on a missile model for a range of positions under the mid-semispan location of a 45deg sweptback wing indicated longitudinal and lateral forces with regard to both carriage and release of the missiles. Surveys of the characteristics of the flow field in the region likely to be traversed by the missiles showed abrupt gradients in both flow angularity and in local dynamic pressure. Through the use of aerodynamic data on the isolated missile and the measured flow-field characteristics, the longitudinal forces and moments acting on the missile while in the presence of the wing-fuselage combination could be estimated with fair accuracy. Although the lateral forces and moments predicted were qualitatively correct, there existed some large discrepancies in absolute magnitude.

Report presenting an investigation of the pumping characteristics of eight conical ejectors mounted on a fuselage portion of a supersonic airplane. The diameter ratio, spacing ratio, nozzle pressure, and ejector weight flows were varied. Results regarding the ejector pumping characteristics, comparison with previous results, comparison of data for cold and hot primary flow, and ejector air-supply requirements are provided.

Report presenting an investigation of the pumping characteristics of eight conical ejectors mounted on a scale fuselage portion of a supersonic airplane. The configurations simulated various positions of a two-position nozzle with a fixed shroud and double-iris exit. Results regarding ejector pumping characteristics, comparison with previous results, comparison of data for cold and hot primary flow, and ejector air-supply requirements are provided.

Report presenting an investigation to determine the blade torsional deflection of three supersonic-type propellers at various operating conditions. Blade-torsional deflection was found to produce appreciable results that can be predicted by theory with good accuracy. Results regarding the efficiency, thrust coefficient, and power coefficient are provided.

The variation of dielectric constant has been measured as a function of the concentration of magnesium particles; the shape, size, and degree of oxidation of the particles; the temperature; and the frequency of oscillation. The variation of dielectric constant and settling rate was investigated as a function of time. Also investigated were the effects of particle concentration, shape and time on dielectric losses.

An investigation of the lateral-directional flying qualities of a tandem-rotor helicopter in forward flight was undertaken to determine desirable goals for helicopter lateral-directional flying qualities and possible methods of achieving these goals in the tandem-rotor helicopter. Comparison between directional stability as measured in flight and rotor-off model tests in a wind tunnel shows qualitative agreement and, hence, indicates such wind-tunnel test, despite the absence of the rotors, to be one effective method of studying means of improving the directional stability of the tandem helicopter. Flight-test measurements of turns and oscillations, in conjunction with analytical studies, suggest possible practical methods of achieving the goals of satisfactory turn and oscillatory characteristics in the tandem helicopter.

"A stability analysis is made of a long flat rectangular plate subjected to a uniform longitudinal compressive stress and supported along its longitudinal edges and along one or more longitudinal lines by elastic line supports. The elastic supports possess deflectional and rotational stiffness. Such configuration is an idealization of the compression cover skin and internal structure of a wing and tail surfaces" (p. 1).

From Summary: "The results of a computational program are presented which give numerical values of the stiffnesses required of the various components of a multipost-stiffened wing to achieve desired buckling-stress values under bending loads. Two arrangements of the posts are considered, upright posts and posts used as diagonals of a Warren truss. This work extends and summarizes the calculations presented in NACA RM L52K10a."

Memorandum presenting an investigation of flow deflectors which extend forward of an open-nose inlet for improving positive angle-of-attack performance and auxiliary scoops for use at off-design engine air-flow conditions at low angles of attack to determine their effect on net inlet performance. The results show that a deflector inlet and a basic open-nose inlet have about the same net performance at low angles of attack although the flow steadiness characteristics of the deflector inlet are the less desirable.

From Summary: "The results of two investigations, one to determine the relative merits of four experimental and two conventional design 75-millimeter-bore (size 215) cylindrical roller bearings and one to determine the relative merits of nodular iron and bronze as cage materials for this size and type of bearing, are presented in this report. Nine test bearings were operated over a range of dn values (product of bearing bore in mm and shaft speed in r.p.m) from 0.3 x 10(6) to 2.3 x 20(6), radial loads for 7 to 1613 pounds, and oil flows from 2 to 8 pounds per minute with a single-jet circulatory oil feed. Of the six bearings used to evaluate designs, four were experimental types with outer-race-riding cages and inner-race-guided rollers, and two were conventional types, one with outer-race-guided rollers and cage and one with inner-race-guided rollers and cage."

Report discussing testing of a Douglas D-558-II to investigate its longitudinal stability characteristics in accelerated flight at supersonic speeds. Information about the normal-force coefficients and their relation to stability and pitch-up of the aircraft is included.

Memorandum presenting flight tests performed with the Douglas D-558-II research airplane in order to determine the lateral handling characteristics in straight flight at supersonic speeds. It primarily describes the lateral motions obtained at moderate and low angles of attack during a preliminary survey in pushovers and straight flight at supersonic Mach numbers up to about 2.0 at altitudes between 50,000 and 70,000 feet.

Report presenting flight tests conducted between Mach numbers of 0.9 to 1.8 over a range of Reynolds numbers to determine the zero-lift drag and some rolling-effectiveness characteristics of a proposed long-range, supersonic, ground-to-ground missile. Results regarding the longitudinal trim, drag, rolling effectiveness, and instability due to roll are provided.

Report presenting testing of a medium-camber compressor rotor with particular NACA blades in a low-speed 28-inch test blower. Testing was made at solidities of 1.0 and 0.5 without guide vanes or stators over a wide range of blade-setting angles and quantity flow rates. Results regarding overall rotor performance, comparison between measured and estimated section efficiencies near design angle of attack, comparison between low-speed rotor and cascade turning angles, and detailed blade section performance are provided.

Note presenting the operating characteristics of an acceleration restrictor which limits the normal acceleration of an airplane in maneuvers determined from tests on a simulator. The simulator consisted of a control stick geared to a magnetic brake unit and an analog computer which simulated the dynamic characteristics of the airplane.

Report presenting the two-dimensional aerodynamic characteristics of an NACA 64A010 airfoil with a slat at a range of Mach numbers. Two types of slat positions were investigated, one with the slat leading edge extended forward along the airfoil chord line and one with the slat extended forward and displaced below the chord line. Results regarding lift, drag, pitching moment, and pressure distribution are provided.

Memorandum presenting the effects of resin coating methods on some physical properties of laminates prepared with glass fabric, Fiberglas 181, and bonded with two commercial polyester resins. The resins used were Laminac 4126 and Selectron 5003. The resin coating methods used were roller coating, application of a dilute solution of resin, resin immersion, application of monomeric styrene, and vacuum impregnation.

Report presenting experiments to study the start of fretting and cause of damage during the early stages of fretting of steel-steel combinations at a frequency 5 cycles per minute, an amplitude of 0.006 inch, a load of 150 grams, in air with relative humidity of less than 10 percent. Pure iron, glass, and iron oxide powder compacts were used in supplementary experiments.

Report presenting data obtained from an investigation of the Douglas-D558-II airplane to determine its buffeting characteristics at high lift and supersonic speeds. From Summary: "Buffeting was encountered at normal-force coefficients greater than about 0.7 in the Mach number range from 0.96 to 1.27 but at Mach number of 1.57, a peak normal-force coefficient of 0.80 was attained with no indication of buffeting. The increase in buffet intensity with lift is very gradual at supersonic speed compared with the buffet intensity-lift variation at subsonic Mach numbers."

From Summary: "Linearized compressible-flow analysis is applied to the study of wind-tunnel-wall interference for subsonic flow in either two-dimensional or circular test sections having slotted or porous walls. Expressions are developed for evaluating blockage and lift interference."