Sludge samples from the DWPF Slurry Mix Evaporator (SME) heating coil frame and coil surface were characterized to identify differences that might help identify heat transfer fouling materials. The SME steam coils have seen increased fouling leading to lower boil-up rates. Samples of the sludge were taken from the coil frame somewhat distant from the coil (bulk tank material) and from the coil surface (coil surface sample). The results of the analysis indicate the composition of the two SME samples are very similar with the exception that the coil surface sample shows {approx}5-10X higher mercury concentration than the bulk tank sample. Elemental analyses and x-ray diffraction results did not indicate notable differences between the two samples. The ICP-MS and Cs-137 data indicate no significant differences in the radionuclide composition of the two SME samples. Semi-volatile organic analysis revealed numerous organic molecules, these likely result from antifoaming additives. The compositions of the two SME samples also match well with the analyzed composition of the SME batch with the exception of significantly higher silicon, lithium, and boron content in the batch sample indicating the coil samples are deficient in frit relative to the SME batch composition.

We introduce a jet shape observable defined for an ensemble of jets in terms of two-particle angular correlations and a resolution parameter R. This quantity is infrared and collinear safe and can be interpreted as a scaling exponent for the angular distribution of mass inside the jet. For small R it is close to the value 2 as a consequence of the approximately scale invariant QCD dynamics. For large R it is sensitive to non-perturbative effects. We describe the use of this correlation function for tests of QCD, for studying underlying event and pile-up effects, and for tuning Monte Carlo event generators.

Calibration parameters from the Connolly et al. (2007) algorithm cannot be applied to the Department of Energy's (DOE) CPI because the DOE CPI is version 2.0. Thus, Dr. Junshik Um and Prof. Greg McFarquhar brought the DOE CPI to the University of Manchester, UK, where facilities for calibrating it were available. In addition, two other versions of CPIs (1.0 and 1.5) were available on-site at the University of Manchester so that an intercomparison of three different versions of the CPI was possible. The three CPIs (versions 1.0, 1.5, and 2.0) were calibrated by moving glass calibration beads and ice analogues of known size parallel to the object plane. The distance between the object plane and a particle, the particle's focus, its apparent maximum dimension, and a background image were measured in order to derive calibration parameters for each CPI version. The calibration parameters are used in two empirical equations that are applied to in situ CPI data to determine particle size and depth of field, and hence particle size distributions (PSDs). After the tests with the glass calibration beads to derive the calibration parameters, the three CPIs were installed at the base of the Manchester Ice Cloud Chamber and connected …

We apply the Basis Light-Front Quantization (BLFQ) approach to the Hamiltonian field theory of Quantum Electrodynamics (QED) in free space. We solve for the mass eigenstates corresponding to an electron interacting with a single photon in light-front gauge. Based on the resulting non-perturbative ground state light-front amplitude we evaluate the electron anomalous magnetic moment. The numerical results from extrapolating to the infinite basis limit reproduce the perturbative Schwinger result with relative deviation less than 1.2%. We report significant improvements over previous works including the development of analytic methods for evaluating the vertex matrix elements of QED.

A letter report issued by the Government Accountability Office with an abstract that begins "Over the past decade, the executive branch has taken steps to improve the management of used federal electronics. Notably, in 2003, EPA helped to pilot the Federal Electronics Challenge (FEC)—a voluntary partnership program that encourages federal facilities and agencies to purchase environmentally friendly electronic products, reduce the impacts of these products during their use, and manage used electronics in an environmentally safe way. EPA also led an effort and provided initial funding to develop third-party certification so that electronics recyclers could show that they are voluntarily adhering to an adopted set of best practices for environmental protection, worker health and safety, and security practices. In 2006, GSA issued its Personal Property Disposal Guide to assist agencies in understanding the hierarchy for disposing of excess personal property, including used electronic products: reutilization, donation, sale, and abandonment or destruction. In 2007 and 2009, executive orders were issued that, among other things, established improvement goals and directed agencies to develop and implement improvement plans for the management of used electronics. The Office of Management and Budget, the Council on Environmental Quality, and the Office of the Federal Environmental Executive …

Parker Precision Cooling Business Unit was awarded a Department of Energy grant (DE-EE0000412) to support the DOE-ITP goal of reducing industrial energy intensity and GHG emissions. The project proposed by Precision Cooling was to accelerate the development of a cooling technology for high heat generating electronics components. These components are specifically related to power electronics found in power drives focused on the inverter, converter and transformer modules. The proposed cooling system was expected to simultaneously remove heat from all three of the major modules listed above, while remaining dielectric under all operating conditions. Development of the cooling system to meet specific customer's requirements and constraints not only required a robust system design, but also new components to support long system functionality. Components requiring further development and testing during this project included pumps, fluid couplings, cold plates and condensers. All four of these major categories of components are required in every Precision Cooling system. Not only was design a key area of focus, but the process for manufacturing these components had to be determined and proven through the system development.

In 2010 a proposal (Modernizing the Fission Basis) was prepared to 'resolve long standing differences between LANL and LLNL associated with the correct fission basis for analysis of nuclear test data'. Collaboration between LANL/LLNL/TUNL has been formed to implement this program by performing high precision measurements of neutron induced fission product yields as a function of incident neutron energy. This new program benefits from successful previous efforts utilizing mono-energetic neutrons undertaken by this collaboration. The first preliminary experiment in this new program was performed between July 24-31, 2011 at TUNL and had 2 main objectives: (1) demonstrating the capability to measure characteristic {gamma}-rays from specific fission products; (2) studying background effects from room scattered neutrons. In addition, a new dual fission ionization chamber has been designed and manufactured. The production design of the chamber is shown in the picture below. The first feasibility experiment to test this chamber is scheduled at the TUNL Tandem Laboratory from September 19-25, 2011. The dual fission chamber design will allow simultaneous exposure of absolute fission fragment emission rate detectors and the thick fission activation foils, positioned between the two chambers. This document formalizes the earlier experimental report demonstrating the experimental capability to make accurate …

The federal budget is central to Congress's ability to exercise its “power of the purse.” Over the last several fiscal years the imbalance between spending and revenues has grown as a result of the economic downturn and policies enacted in response to financial turmoil. This report looks at ways in which Congress and the Obama Administration have acted in order to reduce US budgetary issues.

Periods of rising oil prices can result in reduced economic growth, rising prices, and reduced disposable incomes for consumers, as well as a deteriorating trade balance. For the oil industry, periods of high oil prices generally imply increasing cash flows and higher profits. Although the U.S. oil industry is composed of many firms, to many the face of the oil industry is represented by the five major firms operating extensively in the U.S. market. These firms are ExxonMobil, Chevron, BP plc, Royal Dutch Shell plc, and ConocoPhillips. During the period 2007 to 2011, the five major companies' upstream activities of exploration and production contributed more to the total profitability of the firms than the downstream activities of refining and marketing.

None

A letter report issued by the Government Accountability Office with an abstract that begins "Although the Departments of Defense (DOD) and Energy (DOE) use various investment review processes to identify duplicative investments, GAO found that 37 of its sample of 810 investments were potentially duplicative. These investments account for about $1.2 billion in total information technology (IT) spending for fiscal years 2007 through 2012. For example, GAO identified four DOD Navy personnel assignment investments—one system for officers, one for enlisted personnel, one for reservists, and a general assignment system—each of which is responsible for managing similar functions. While GAO did not identify any potentially duplicative investments at the Department of Homeland Security (DHS) within its sample, DHS officials have independently identified several duplicative investments and systems."

Testimony issued by the Government Accountability Office with an abstract that begins "Although the Departments of Defense, Energy, and Homeland Security utilize various processes to prevent and reduce investment in duplicative programs and systems, potentially duplicative IT investments exist. Further complicating agencies’ ability to identify and address duplicative investments is miscategorization of investments within agencies. Each of the agencies has recently initiated plans to address many of these investments. DHS’s efforts have resulted in the identification and elimination of duplication, but DOD’s and DOE’s initiatives have not yet led to the elimination or consolidation of duplicative investments or functionality. Until DOD and DOE demonstrate progress on their efforts to identify and eliminate duplicative investments, and correctly categorize investments, it will remain unclear whether they are avoiding investment in unnecessary systems. Each of the agencies we reviewed has IT investment management processes in place that are, in part, intended to prevent, identify, and eliminate unnecessary duplicative investments. Even with such investment review processes, of the 810 investments we reviewed,we identified 37 potentially duplicative investments at DOD and DOE within three FEA categories (Human Resource Management, Information and Technology Management, and Supply Chain Management)."

A method is proposed for the calculation of the short-range wake field potentials of an ultra-relativistic bunch passing near some irregularities in a beam pipe. The method is based on the space-time domain integration of Maxwell's equations using Kirchhoff's formulation. We demonstrate this method on two cases where we obtain the wake potentials for the energy loss of a bunch traversing an iris-collimator in a beam pipe and for a cavity. Likewise, formulas are derived for Green's functions that describe the transverse force action of wake fields. Simple formulas for the total energy loss of a bunch with a Gaussian charge density distribution are derived as well. The derived estimates are compared with computer results and predictions of other models.

After the successful operation of FLASH (Free-Electron Laser in Hamburg) and LCLS (Linac Coherent Light Source), soft and hard X-ray Free Electron Lasers (FELs) are being built, designed or proposed at many accelerator laboratories. Acceleration employing lower frequency RF cavities, ranging from L-band to C-band, is usually adopted in these designs. In the first stage bunch compression, higher-frequency harmonic RF system is employed to linearize the beam's longitudinal phase space, which is nonlinearly chirped during the lower frequency RF acceleration process. In this paper, a hard X-ray FEL design using an all X-band accelerator at 11.424 GHz (from photo-cathode RF gun to linac end) is presented, without the assistance of any harmonic RF linearization. It achieves LCLS-like performance at low charge using X-band linac drivers, which is more versatile, efficient and compact than ones using S-band or C-band rf technology. It employs initially 42 microns long (RMS), low charge (10 pC) electron bunches from an X-band photoinjector. An overall bunch compression ratio of roughly 100 times is proposed in a two stage bunch compressor system. The start-to-end macro-particle 3-D simulation employing several computer codes is presented in this paper, where space charge, wakefields, incoherent and coherent synchrotron radiation (ISR and …

We study the maximally supersymmetric Kondo model obtained by adding a fermionic impurity to N = 4 supersymmetric Yang-Mills theory. While the original Kondo problem describes a defect interacting with a free Fermi liquid of itinerant electrons, here the ambient theory is an interacting CFT, and this introduces qualitatively new features into the system. The model arises in string theory by considering the intersection of a stack of M D5-branes with a stack of N D3-branes, at a point in the D3 worldvolume. We analyze the theory holographically, and propose a dictionary between the Kondo problem and antisymmetric Wilson loops in N = 4 SYM. We perform an explicit calculation of the D5 fluctuations in the D3 geometry and determine the spectrum of defect operators. This establishes the stability of the Kondo fixed point together with its basic thermodynamic properties. Known supergravity solutions for Wilson loops allow us to go beyond the probe approximation: the D5s disappear and are replaced by three-form flux piercing a new topologically non-trivial S3 in the corrected geometry. This describes the Kondo model in terms of a geometric transition. A dual matrix model reflects the basic properties of the corrected gravity solution in its eigenvalue …

A letter report issued by the Government Accountability Office with an abstract that begins "CNCS officials expect that most grantees from its main programs will adopt at least 1 of the agency’s 16 agency-wide performance measures. Specifically, officials told us that AmeriCorps State and National and VISTA grantees will adopt at least 1 of CNCS’s performance measures by fiscal year 2012, and Senior Corps grantees will adopt at least 1 measure by fiscal year 2013. However, officials also said that they plan to fund some activities that do not fall under the performance measures, particularly activities that meet local needs and/or are innovative. For example, CNCS has funded grantees in the state of Washington to carry out gang violence prevention activities to address this community challenge. This could present challenges for CNCS as it balances accountability, using its performance measures to assess the impact of grantees’ service activities, with flexibility, allowing grantees to take on projects that meet local needs. CNCS may find it difficult to demonstrate the effectiveness of its service activities that fall outside its performance measures. Additionally, CNCS faces challenges using its performance measures to promote accountability among its Senior Corps grantees, as legal restrictions make it …

The behavior of the longitudinal wake fields excited by a very short bunch in the SLAC S-band constant gradient accelerating structures has been studied. Wake potential calculations were performed for a bunch length of 10 microns using the author's code to obtain a numerical solution of Maxwell's equations in the time domain. We have calculated six accelerating sections in the series (60-ft) to find the stationary solution. While analyzing the computational results we have found a new formula for the Green's function. Wake potentials, which are calculated using this Green's function are in amazingly good agreement with numerical results over a wide range of bunch lengths. The Green's function simplifies the wake potential calculations and can be easily incorporated into the tracking codes. This is very useful for beam dynamics studies of the linear accelerators of LCLS and FACET.

Many dimension reduction methods have been proposed to discover the intrinsic, lower dimensional structure of a high-dimensional dataset. However, determining critical features in datasets that consist of a large number of features is still a challenge. In this paper, through a series of carefully designed experiments on real-world datasets, we investigate the performance of different dimension reduction techniques, ranging from feature subset selection to methods that transform the features into a lower dimensional space. We also discuss methods that calculate the intrinsic dimensionality of a dataset in order to understand the reduced dimension. Using several evaluation strategies, we show how these different methods can provide useful insights into the data. These comparisons enable us to provide guidance to a user on the selection of a technique for their dataset.

None

We analyze the phases of supersymmetric chiral gauge theories with an antisymmetric tensor and (anti)fundamental flavors, in the presence of a classically marginal superpotential deformation. Varying the number of flavors that appear in the superpotential reveals rich infrared chiral dynamics and novel dualities. The dualities are characterized by an infinite family of magnetic duals with arbitrarily large gauge groups describing the same fixed point, correlated with arbitrarily large classical global symmetries that are truncated nonperturbatively. At the origin of moduli space, these theories exhibit a phase with confinement and chiral symmetry breaking, an interacting nonabelian Coulomb phase, and phases where an interacting sector coexists with a sector that either s-confines or is in a free magnetic phase. Properties of these intriguing 'mixed phases' are studied in detail using duality and a-maximization, and the presence of superpotential interactions provides further insights into their formation.

This report summarizes results from pulse jet mixing (PJM) tests with noncohesive solids in Newtonian liquid. The tests were conducted during FY 2007 and 2008 to support the design of mixing systems for the Hanford Waste Treatment and Immobilization Plant (WTP). Tests were conducted at three geometric scales using noncohesive simulants, and the test data were used to develop models predicting two measures of mixing performance for full-scale WTP vessels. The models predict the cloud height (the height to which solids will be lifted by the PJM action) and the critical suspension velocity (the minimum velocity needed to ensure all solids are suspended off the floor, though not fully mixed). From the cloud height, the concentration of solids at the pump inlet can be estimated. The predicted critical suspension velocity for lifting all solids is not precisely the same as the mixing requirement for 'disturbing' a sufficient volume of solids, but the values will be similar and closely related. These predictive models were successfully benchmarked against larger scale tests and compared well with results from computational fluid dynamics simulations. The application of the models to assess mixing in WTP vessels is illustrated in examples for 13 distinct designs and selected …

Questions about the characteristics of Members of Congress, including their age, education, previous occupations, and other descriptors, are of ongoing interest to Members, congressional staff, and constituents. Some of these questions may be asked in the context of representation, in efforts to evaluate the extent to which Members of Congress reflect their constituencies and the nation at large. In other instances, questions arise about how the characteristics of Members have changed over time, which may speak in part to the history of Congress. This report provides profiles of Senators and Representatives in selected Congresses since 1945. It includes data based on Representatives and Senators serving on the first day of the 79th, 82nd, 87th, 92nd, 97th, 102nd, and 107th–112th Congresses for several demographic characteristics, as well as the tenure of Member service in Congress. The characteristics discussed include age, including the oldest and youngest Members of the House and Senate; congressional service tenure; sex; previous occupation; race and ethnicity; education; religion; and military service.

Brookhaven National Laboratory (BNL) assisted the Korea Institute of Nuclear Safety (KINS) in reviewing the Level 2 Probabilistic Safety Assessment (PSA) of the APR+ Advanced Pressurized Water Reactor (PWR) prepared by the Korea Hydro & Nuclear Power Co., Ltd (KHNP) and KEPCO Engineering & Construction Co., Inc. (KEPCO-E&C). The work described in this report involves a review of the APR+ Level 2 PSA submittal [Ref. 1]. The PSA and, therefore, the review is limited to consideration of accidents initiated by internal events. As part of the review process, the review team also developed three sets of Requests for Additional Information (RAIs). These RAIs were provided to KHNP and KEPCO-E&C for their evaluation and response. This final detailed report documents the review findings for each technical element of the PSA and includes consideration of all of the RAIs made by the reviewers as well as the associated responses. This final report was preceded by an interim report [Ref. 2] that focused on identifying important issues regarding the PSA. In addition, a final meeting on the project was held at BNL on November 21-22, 2011, where BNL and KINS reviewers discussed their preliminary review findings with KHNP and KEPCO-E&C staffs. Additional information …

This report reviews the requirements contained in Senate rules pertaining to committees; it then explores how each Senate committee addresses 11 specific issues: meeting day, hearing and meeting notice requirements, scheduling of witnesses, hearing quorum, business quorum, amendment filing requirements, proxy voting, polling, nominations, investigations, and subpoenas. In addition, the report looks at the unique provisions some committees have included in their rules in the miscellaneous category.