The electron-charge effects have been demonstrated to enhance hydrogen storage capacity using materials which have inherent hydrogen storage capacities. A charge control agent (CCA) or a charge transfer agent (CTA) was applied to the hydrogen storage material to reduce internal discharge between particles in a Sievert volumetric test device. GTI has tested the device under (1) electrostatic charge mode; (2) ultra-capacitor mode; and (3) metal-hydride mode. GTI has also analyzed the charge distribution on storage materials. The charge control agent and charge transfer agent are needed to prevent internal charge leaks so that the hydrogen atoms can stay on the storage material. GTI has analyzed the hydrogen fueling tank structure, which contains an air or liquid heat exchange framework. The cooling structure is needed for hydrogen fueling/releasing. We found that the cooling structure could be used as electron-charged electrodes, which will exhibit a very uniform charge distribution (because the cooling system needs to remove heat uniformly). Therefore, the electron-charge concept does not have any burden of cost and weight for the hydrogen storage tank system. The energy consumption for the electron-charge enhancement method is quite low or omitted for electrostatic mode and ultra-capacitor mode in comparison of other hydrogen storage …

None

In this project, a predictive multiscale framework will be developed to simulate the strong coupling between solid deformations and fluid diffusion in porous rocks. We intend to improve macroscale modeling by incorporating fundamental physical modeling at the microscale in a computationally efficient way. This is an essential step toward further developments in multiphysics modeling, linking hydraulic, thermal, chemical, and geomechanical processes. This research will focus on areas where severe deformations are observed, such as deformation bands, where classical phenomenology breaks down. Multiscale geometric complexities and key geomechanical and hydraulic attributes of deformation bands (e.g., grain sliding and crushing, and pore collapse, causing interstitial fluid expulsion under saturated conditions), can significantly affect the constitutive response of the skeleton and the intrinsic permeability. Discrete mechanics (DEM) and the lattice Boltzmann method (LBM) will be used to probe the microstructure---under the current state---to extract the evolution of macroscopic constitutive parameters and the permeability tensor. These evolving macroscopic constitutive parameters are then directly used in continuum scale predictions using the finite element method (FEM) accounting for the coupled solid deformation and fluid diffusion. A particularly valuable aspect of this research is the thorough quantitative verification and validation program at different scales. The multiscale homogenization …

President Obama's FY2013 budget submission was released on February 13, 2012. This report provides a graphical overview of historical trends in discretionary budget authority (BA) from FY1976 through FY2011, enacted levels for FY2012 spending, and the levels consistent with the President's proposals for FY2013 through FY2017. Spending caps and budget enforcement mechanisms established in the Budget Control Act (BCA) of 2011 will probably strongly affect the FY2013 budget cycle. This report may provide a starting point for discussions about spending trends and federal priorities, but it does not attempt to explain spending patterns in each policy area.

In this project, we proposed to develop laser based mid-infrared lasers as a potentially robust and reliable source of ultrafast pulses in the mid-infrared region of the spectrum, and to apply this light source to generating bright, coherent, femtosecond-to-attosecond x-ray beams.

This report discusses the background and current status of CERCLA (the Comprehensive Environmental Response, Compensation, and Liability Act of 1980), which was a response to a growing desire for the federal government to ensure the cleanup of the nation's most contaminated sites to protect the public from potential harm. Concerns for Congress include funding for this act; most funding comes from potentially responsible parties (PRPs), but some also comes from the CERCLA established Hazardous Substance Superfund Trust Fund.

NATO's 2012 summit of alliance heads of state and government is scheduled to take place in Chicago on May 20-21. U.S. and NATO officials have outlined what they expect to be the Summit's three main agenda items: Defining the next phase of formal transition in Afghanistan and shaping a longer term NATO commitment to the country after the planned end of combat operations by the end of 2014; Securing commitments to maintain and develop the military capabilities necessary to meet NATO's defense and security goals, including through a new "Smart Defense" initiative; and Enhancing NATO's partnerships with non-NATO member states.

This report details the progress made in by the SuperB Project in the area of the Collider since the publication of the SuperB Conceptual Design Report in 2007 and the Proceedings of SuperB Workshop VI in Valencia in 2008. With this document we propose a new electron positron colliding beam accelerator to be built in Italy to study flavor physics in the B-meson system at an energy of 10 GeV in the center-of-mass. This facility is called a high luminosity B-factory with a project name 'SuperB'. This project builds on a long history of successful e+e- colliders built around the world, as illustrated in Figure 1.1. The key advances in the design of this accelerator come from recent successes at the DAFNE collider at INFN in Frascati, Italy, at PEP-II at SLAC in California, USA, and at KEKB at KEK in Tsukuba Japan, and from new concepts in beam manipulation at the interaction region (IP) called 'crab waist'. This new collider comprises of two colliding beam rings, one at 4.2 GeV and one at 6.7 GeV, a common interaction region, a new injection system at full beam energies, and one of the two beams longitudinally polarized at the IP. Most …

This report provides background information and identifies issues for Congress regarding Department of Defense alternative fuel initiatives, a subject of debate at congressional hearings on the Department of Defense's proposed FY 2013 budget.

Report discussing the use of biomass, its legislative history, and the proposed redefinition of biomass in legislation.

None

None

Supervisory Control and Data Acquisition (SCADA) Systems are a type of Industrial Control System characterized by the centralized (or hierarchical) monitoring and control of geographically dispersed assets. SCADA systems combine acquisition and network components to provide data gathering, transmission, and visualization for centralized monitoring and control. However these integrated capabilities, especially when built over legacy systems and protocols, generally result in vulnerabilities that can be exploited by attackers, with potentially disastrous consequences. Our research project proposal was to investigate new approaches for secure and survivable SCADA systems. In particular, we were interested in the resilience and adaptability of large-scale mission-critical monitoring and control infrastructures. Our research proposal was divided in two main tasks. The first task was centered on the design and investigation of algorithms for survivable SCADA systems and a prototype framework demonstration. The second task was centered on the characterization and demonstration of the proposed approach in illustrative scenarios (simulated or emulated).

Mechanistic Studies at the Interface Between Organometallic Chemistry and Homogeneous Catalysis Charles P. Casey, Principal Investigator Department of Chemistry, University of Wisconsin - Madison, Madison, Wisconsin 53706 Phone 608-262-0584 FAX: 608-262-7144 Email: casey@chem.wisc.edu http://www.chem.wisc.edu/main/people/faculty/casey.html Executive Summary. Our goal was to learn the intimate mechanistic details of reactions involved in homogeneous catalysis and to use the insight we gain to develop new and improved catalysts. Our work centered on the hydrogenation of polar functional groups such as aldehydes and ketones and on hydroformylation. Specifically, we concentrated on catalysts capable of simultaneously transferring hydride from a metal center and a proton from an acidic oxygen or nitrogen center to an aldehyde or ketone. An economical iron based catalyst was developed and patented. Better understanding of fundamental organometallic reactions and catalytic processes enabled design of energy and material efficient chemical processes. Our work contributed to the development of catalysts for the selective and mild hydrogenation of ketones and aldehydes; this will provide a modern green alternative to reductions by LiAlH4 and NaBH4, which require extensive work-up procedures and produce waste streams. (C5R4OH)Ru(CO)2H Hydrogenation Catalysts. Youval Shvo described a remarkable catalytic system in which the key intermediate (C5R4OH)Ru(CO)2H (1) has an electronically coupled acidic …

During Phase I, we successfully processed air atomized aluminum powders via Dynamic Magnetic Compaction (DMC) pressing and subsequent sintering to produce parts with properties similar to wrought aluminum. We have also showed for the first time that aluminum powders can be processed without lubes via press and sintering to 100 % density. This will preclude a delube cycle in sintering and promote environmentally friendly P/M processing. Processing aluminum powders via press and sintering with minimum shrinkage will enable net shape fabrication. Aluminum powders processed via a conventional powder metallurgy process produce too large a shrinkage. Because of this, sinter parts have to be machined into specific net shape. This results in increased scrap and cost. Fully sintered aluminum alloy under this Phase I project has shown good particle-to-particle bonding and mechanical properties. We have also shown the feasibility of preparing nano composite powders and processing via pressing and sintering. This was accomplished by dispersing nano silicon carbide (SiC) powders into aluminum matrix comprising micron-sized powders (<100 microns) using a proprietary process. These composite powders of Al with nano SiC were processed using DMC press and sinter process to sinter density of 85-90%. The process optimization along with sintering needs to …

This report provides an overview of the mid-session review and analysis of the timing of the mid-session review and discusses the President's budget request.

This report provides answers to frequently asked questions about the presidential nominating process, including how the delegates to the national conventions are chosen, the differences between a caucus and a primary, national party rules changes for 2012, and the national conventions themselves.

Japan and the United States are the two largest economic powers. Together they account for over 30% of world domestic product, for a significant portion of international trade in goods and services, and for a major portion of international investment. This economic clout makes the United States and Japan potentially powerful actors in the world economy. Economic conditions in the United States and Japan have a significant impact on the rest of the world. Furthermore, the U.S.-Japan bilateral economic relationship can influence economic conditions in other countries. More generally, other issues regarding U.S.-Japan economic relations may emerge on the agenda of the 112th Congress. U.S. and Japanese leaders have several options on how to manage their relationship, including stronger reliance on the World Trade Organization; special bilateral negotiating frameworks and agreements; or a free trade agreement.

The Mixed Oxide Fuel Fabrication Facility (MFFF) will use Colemanite bearing concrete neutron absorber panels credited with attenuating neutron flux in the criticality design analyses. The Savannah River National Laboratory is tasked with measuring the total density, partial hydrogen density, and partial boron density of the colemanite concrete. Sample 04 May 12/Test/S1-1, S1-2, and S1-3 was received on 5/9/2012 and analyzed. The total density measure by the ASTM method C 642 was 2.00 g/cm{sup 3}, within the lower bound of 1.88 g/cm{sup 3}. The partial hydrogen density of 6.35E-02 g/cm{sup 3} as measured using method ASTM E 1311 met the lower bound of 6.04E-02 g/cm{sup 3}. The measured partial boron density of 1.88E-01 g/cm{sup 3} exceeded the lower bound of 1.65E-01 g/cm{sup 3} when the sodium peroxide fusion dissolution method was used in place of the prescribed ASTM C 1301 method.

This project was a component of the Shewanella Federation and, as such, contributed to the overall goal of applying the genomic tools to better understand eco-physiology and speciation of respiratory-versatile members of Shewanella genus. Our role at Boston University was to perform bioreactor and high throughput gene expression microarrays, and combine dynamic flux balance modeling with experimentally obtained transcriptional and gene expression datasets from different growth conditions. In the first part of project, we designed the S. oneidensis microarray probes for Affymetrix Inc. (based in California), then we identified the pathways of carbon utilization in the metal-reducing marine bacterium Shewanella oneidensis MR-1, using our newly designed high-density oligonucleotide Affymetrix microarray on Shewanella cells grown with various carbon sources. Next, using a combination of experimental and computational approaches, we built algorithm and methods to integrate the transcriptional and metabolic regulatory networks of S. oneidensis. Specifically, we combined mRNA microarray and metabolite measurements with statistical inference and dynamic flux balance analysis (dFBA) to study the transcriptional response of S. oneidensis MR-1 as it passes through exponential, stationary, and transition phases. By measuring time-dependent mRNA expression levels during batch growth of S. oneidensis MR-1 under two radically different nutrient compositions (minimal lactate and …

This report presents a brief description of the five methods used to bring proposed legislation to the House floor for consideration. These methods allow for consideration as a privileged matter, under the limited privilege of a special calendar or day, under suspension of the rules, under the terms of a special rule, or by unanimous consent.

The report is about Carl D. Perkins Career and Technical Education Act of 2006. The report contains Program Evaluation, Relationship with Workforce investment act and alternative funding mechanisms.

This report discusses the appropriations bill, FY2013 Appropriations, which provides funding for the planning, design, construction, alteration, and improvement of facilities used by active and reserve military components worldwide.

Future large scale sciences are anticipated to use massive amount of data in their experiments. DOE’s ESnet (Energy Science Network) is developing a 100 Gbps backbone based on this state-of-the-art 100 Gigabit Ethernet standard. ESnet will serve thousands of DOE and non-DOE scientists with its high bandwidth backbone, and connect several national laboratories. Current Ethernet test and debug solutions, such as network traffic capturer/analyzer tools, support up to 10 Gbps speed, and the very few capable of handling 100 Gbps are extremely costly. Such tools are essential in the development of high speed devices and routers, and ultimately the success of 100 Gigabit Ethernet.