This paper describes an optimization of the detector configuration, based on the Shannon-Nyquist theory, for two major x-ray diagnostic systems on tokamaks and stellarators: x-ray imaging crystal spectrometers and x-ray pinhole cameras. Typically, the spectral data recorded with pixilated detectors are oversampled, meaning that the same spectral information could be obtained using fewer pixels. Using experimental data from Alcator C-Mod, we quantify the degree of oversampling and propose alternate uses for the redundant pixels for additional diagnostic applications.

A polarized ep/eA collider (Electron-Ion Collider, or EIC) with variable center-of-mass energy {radical}s {approx} 20-70 GeV and a luminosity {approx}10{sup 34} cm{sup -2} s{sup -1} would be uniquely suited to address several outstanding questions of Quantum Chromodynamics (QCD) and the microscopic structure of hadrons and nuclei: (i) the three-dimensional structure of the nucleon in QCD (sea quark and gluon spatial distributions, orbital motion, polarization, correlations); (ii) the fundamental color fields in nuclei (nuclear parton densities, shadowing, coherence effects, color transparency); (iii) the conversion of color charge to hadrons (fragmentation, parton propagation through matter, in-medium jets). We briefly review the conceptual aspects of these questions and the measurements that would address them, emphasizing the qualitatively new information that could be obtained with the collider. Such a medium-energy EIC could be realized at Jefferson Lab after the 12 GeV Upgrade (MEIC), or at Brookhaven National Lab as the low-energy stage of eRHIC.

We are developing a novel technique that may help increase the efficiency and reduce costs of photoelectron sources used at electron accelerators. The technique is based on the use of Surface Acoustic Waves (SAW) in piezoelectric materials, such as GaAs, that are commonly used as photocathodes. Piezoelectric fields produced by the traveling SAW spatially separate electrons and holes, reducing their probability of recombination, thereby enhancing the photoemission quantum efficiency of the photocathode. Additional advantages could be increased polarization provided by the enhanced mobility of charge carriers that can be controlled by the SAW and the ionization of optically-generated excitons resulting in the creation of additional electron-hole pairs. It is expected that these novel features will reduce the cost of accelerator operation. A theoretical model for photoemission in the presence of SAW has been developed, and experimental tests of the technique are underway.

The paper discusses the two-loop (NNLO) electroweak radiative corrections to the parity violating electron-electron scattering asymmetry induced by squaring one-loop diagrams. The calculations are relevant for the ultra-precise 11 GeV MOLLER experiment planned at Jefferson Laboratory and experiments at high-energy future electron colliders. The imaginary parts of the amplitudes are taken into consideration consistently in both the infrared-finite and divergent terms. The size of the obtained partial correction is significant, which indicates a need for a complete study of the two-loop electroweak radiative corrections in order to meet the precision goals of future experiments.

N/A

Performance and reliability of photovoltaic (PV) systems are important issues in the overall evaluation of a PV plant and its components. While performance is connected to the amount of energy produced by the PV installation in the working environmental conditions, reliability impacts the availability of the system to produce the expected amount of energy. In both cases, the evaluation should be done considering information and data coming from indoor as well as outdoor tests. In this paper a way of re-thinking performance, giving it a probabilistic connotation, and connecting the two concepts of performance and reliability is proposed. The paper follows a theoretical approach and discusses the way to obtaining such information, facing benefits and problems. The proposed probabilistic performance accounts for the probability of the system to function correctly, thus passing through the complementary evaluation of the probability of system malfunctions and consequences. Scenarios have to be identified where the system is not functioning properly or at all. They are expected to be combined in a probabilistic safety analysis (PSA) based approach, providing not only the required probability, but also being capable of giving a prioritization of the risks and the most dominant scenario associated to a specific situation. …

N/A

N/A

The thorough study of coherent electron cooling, the modern cooling technique capable to deal with accelerators operating in the range of few TeVs, rises many interesting questions. One of them is a shielding dynamics of a hadron in an electron beam. Now this effect is computed analytically in the infinite beam approximation. Many effects are drastically different in finite and infinite plasmas. Here we propose a method to compute the dynamical shielding effect in a finite cylindrical plasma - the realistic model of an electron beam in accelerators.

A battery pack prototype has been designed and built to evaluate various air cooling concepts for the thermal management of Li-ion batteries. The heat generation from the Li-Ion batteries was simulated with electrical heat generation devices with the same dimensions as the Li-Ion battery (200 mm x 150 mm x 12 mm). Each battery simulator generates up to 15W of heat. There are 20 temperature probes placed uniformly on the surface of the battery simulator, which can measure temperatures in the range from -40 C to +120 C. The prototype for the pack has up to 100 battery simulators and temperature probes are recorder using a PC based DAQ system. We can measure the average surface temperature of the simulator, temperature distribution on each surface and temperature distributions in the pack. The pack which holds the battery simulators is built as a crate, with adjustable gap (varies from 2mm to 5mm) between the simulators for air flow channel studies. The total system flow rate and the inlet flow temperature are controlled during the test. The cooling channel with various heat transfer enhancing devices can be installed between the simulators to investigate the cooling performance. The prototype was designed to configure …

N/A

A new generation of complete experiments in pseudoscalar meson photo-production is being pursued at several laboratories. While new data are emerging, there is some confusion regarding definitions of asymmetries and the conventions used in partial wave analyses (PWA). We present expressions for constructing asymmetries as coordinate-system independent ratios of cross sections, along with the names used for these ratios by different PWA groups.

Technetium-99 (Tc-99) can bring a serious environmental threat because of its high fission yield, long half-life, and high solubility and mobility in the ground water. The present work investigated the immobilization of Tc-99 (surrogated by Re) by heat-treating mixtures of an iron-phosphate glass with 1.5 to 6 wt.% KReO{sub 4} at {approx}1000 C. The Re retention in the glass was as high as {approx}1.2 wt. % while the loss of Re by evaporation during melting was {approx}50%. Re was uniformly distributed within the glass. The normalized Re release by the 7-day Product Consistency Test was {approx}0.39 g/m{sup 2}, comparable with that in phosphate-bonded ceramics and borosilicate glasses. These results suggest that iron-phosphate glass can provide a good matrix for immobilizing Tc-99.

Simulant testing of a full-scale thin-film evaporator system was conducted in 2011 for technology development at the Hanford tank farms. Test results met objectives of water removal rate, effluent quality, and operational evaluation. Dilute tank waste simulant, representing a typical double-shell tank supernatant liquid layer, was concentrated from a 1.1 specific gravity to approximately 1.5 using a 4.6 m{sup 2} (50 ft{sup 2}) heated transfer area Rototherm{reg_sign} evaporator from Artisan Industries. The condensed evaporator vapor stream was collected and sampled validating efficient separation of the water. An overall decontamination factor of 1.2E+06 was achieved demonstrating excellent retention of key radioactive species within the concentrated liquid stream. The evaporator system was supported by a modular steam supply, chiller, and control computer systems which would be typically implemented at the tank farms. Operation of these support systems demonstrated successful integration while identifying areas for efficiency improvement. Overall testing effort increased the maturation of this technology to support final deployment design and continued project implementation.

The ATLAS detector is used to search for high-mass states, such as heavy charged gauge bosons (W{prime},W*), decaying to a charged lepton (electron or muon) and a neutrino. Results are presented based on the analysis of ppcollisions at a center-of-mass energy of 7 TeV corresponding to an integrated luminosity of 36 pb{sup -1}. No excess beyond standard model expectations is observed. A W{prime} with sequential standard model couplings is excluded at 95% confidence level for masses below 1.49 TeV, and a W* (charged chiral boson) for masses below 1.35 TeV.

This report talks about Combination of CDF and D0 Measurements of the $W$ Boson Helicity in Top Quark Decays

None

We report the combination of recent measurements of the helicity of the W boson from top quark decay by the CDF and D0 collaborations, based on data samples corresponding to integrated luminosities of 2.7-5.4 fb{sup -1} of p{bar p} collisions collected during Run II of the Fermilab Tevatron Collider. Combining measurements that simultaneously determine the fractions of W bosons with longitudinal (f{sub 0}) and right-handed (f{sub +}) helicities, we find f{sub 0} = 0.722 {+-} 0.081 [{+-} 0.062 (stat.) {+-} 0.052 (syst.)] and f{sub +} = -0.033 {+-} 0.046 [{+-} 0.034 (stat.) {+-} 0.031 (syst.)]. Combining measurements where one of the helicity fractions is fixed to the value expected in the standard model, we find f{sub 0} = 0.682 {+-} 0.057 [{+-} 0.035 (stat.) {+-} 0.046 (syst.)] and f{sub +} = ?0.015 {+-} 0.035 [{+-} 0.018 (stat.) {+-} 0.030 (syst.)]. The results are consistent with standard model expectations.

We present a search for a new heavy particle M produced in association with a top quark, p{bar p} {yields} t(M {yields} {bar t}q) or p{bar p} {yields} {bar t}({bar M} {yields} t{bar q}), where q stands for up quarks and down quarks. Such a particle may explain the recent anomalous measurements of top-quark forward-backward asymmetry. If the light-flavor quark (q) is reconstructed as a jet (j), this gives a {bar t}+j or t+j resonance in t{bar t}+jet events, a previously unexplored experimental signature. In a sample of events with exactly one lepton, missing transverse momentum and at least five jets, corresponding to an integrated luminosity of 8.7 fb{sup -1} collected by the CDF II detector, we find the data to be consistent with the standard model. We set cross-section upper limits on the production (p{bar p} {yields} Mt or {bar M} {bar t}) at 95% confidence level from 0.61 pb to 0.02 pb for M masses ranging from 200 GeV/c{sup 2} to 800 GeV/c{sup 2}, respectively.

We report the most restrictive direct limits on masses of fourth-generation down-type quarks b{prime}, and quark-like composite fermions (B or T{sub 5/3}), decaying promptly to tW{sup {-+}}. We search for a significant excess of events with two same-charge leptons (e, {mu}), several hadronic jets, and missing transverse energy. An analysis of data from p{bar p} collisions with an integrated luminosity of 2.7 fb{sup -1} collected with the CDF II detector at Fermilab yields no evidence for such a signal, setting mass limits m{sub b{prime}}, m{sub B} > 338 GeV/c{sup 2} and m{sub T{sub 5/3}} > 365 GeV/c{sup 2} at 95% confidence level.

We report on a study of diffractive dijet production in {bar p}p collisions at {radical}s = 1.96 TeV using the CDF II detector at the Fermilab Tevatron {bar p}p collider. A data sample from 310 pb{sup -1} of integrated luminosity collected by triggering on a high transverse energy jet, E{sub T}{sup jet}, in coincidence with a recoil antiproton detected in a Roman pot spectrometer is used to measure the ratio of single-diffractive to inclusive-dijet event rates as a function of x{sup {bar p}} of the interacting parton in the antiproton, the Bjorken-x, x{sub Bj}{sup {bar p}}, and a Q{sup 2} {approx} (E{sub T}{sup jet}){sup 2} in the ranges 10{sup -3} < x{sub Bj}{sup {bar p}} < 10{sup -1} and 10{sup 2} < Q{sup 2} < 10{sup 4} GeV{sup 2}, respectively. Results are presented for the region of {bar p}-momentum-loss fraction 0.03 < {zeta}{sub {bar p}} < 0.09 and a four-momentum transfer squared t{sub {bar p}} > -4 GeV{sup 2}. The t{sub {bar p}} dependence is measured as a function of Q{sup 2} and x{sub Bj}{sup {bar p}} and compared with that of inclusive single diffraction dissociation. We find weak x{sub Bj}{sup bar p}} and Q{sup 2} dependencies in the ratio …

The decays B{sub s}{sup 0} {yields} D{sub s}{sup (*)+}D{sub s}{sup (*)-}s are reconstructed in a data sample corresponding to an integrated luminosity of 6.8 fb{sup -1} collected by the CDF II detector at the Tevatron p{bar p} collider. All decay modes are observed with a significance of more than 10 {sigma}, and we measure the B{sub s}{sup 0} production rate times B{sub s}{sup 0} {yields} D{sub s}{sup (*)+} D{sub s}{sup (*)-} branching ratios relative to the normalization mode B{sup 0} {yields} D{sub s}{sup +}d{sup -} to be 0.183 {+-} 0.021 {+-} 0.017 for B{sub s}{sup 0} {yields} D{sub s}{sup +}D{sub s}{sup -}, 0.424 {+-} 0.046 {+-} 0.035 for B{sub s}{sup 0} {yields} D{sub s}{sup {+-}} D{sub s}{sup {-+}}, 0.654 {+-} 0.072 {+-} 0.065 for B{sub s}{sup 0} {yields} D{sub s}{sup *+} D{sub s}{sup *-}, and 1.261 {+-} 0.095 {+-} 0.112 for the inclusive decay B{sub s}{sup 0} {yields} D{sub s}{sup (*)+}D{sub s}{sup (*)-}, where the uncertainties are statistical and systematic. These results are the most precise single measurements to date and provide important constraints for indirect searches for non-standard model physics in B{sub s}{sup 0} mixing.

None

This Letter describes the current most precise measurement of the WZ production cross section as well as limits on anomalous WWZ couplings at a center-of-mass energy of 1.96 TeV in proton-antiproton collisions. The WZ candidates are reconstructed from decays containing three charged leptons and missing energy from a neutrino, where the charged leptons are either electrons or muons. Using data collected by the CDF II detector (7.1 fb{sup -1} of integrated luminosity), 64 candidate events are observed with the expected background contributing 8 {+-} 1 events. The measured total cross section {sigma}(p{bar p} {yields} WZ) = 3.93{sub -0.53}{sup +0.60}(stat){sub -0.46}{sup +0.59}(syst) pb is in good agreement with the standard model prediction of 3.50 {+-} 0.21. The same sample is used to set limits on anomalous WWZ couplings.