Market Acceleration (Fact Sheet) (open access)

Market Acceleration (Fact Sheet)

The fact sheet summarizes the goals and activities of the DOE Solar Energy Technologies Program efforts within its market acceleration subprogram.
Date: September 1, 2010
Creator: unknown
Object Type: Report
System: The UNT Digital Library
Development of Hollow Electron Beams for Proton and Ion Collimation (open access)

Development of Hollow Electron Beams for Proton and Ion Collimation

Magnetically confined hollow electron beams for controlled halo removal in high-energy colliders such as the Tevatron or the LHC may extend traditional collimation systems beyond the intensity limits imposed by tolerable material damage. They may also improve collimation performance by suppressing loss spikes due to beam jitter and by increasing capture efficiency. A hollow electron gun was designed and built. Its performance and stability were measured at the Fermilab test stand. The gun will be installed in one of the existing Tevatron electron lenses for preliminary tests of the hollow-beam collimator concept, addressing critical issues such as alignment and instabilities of the overlapping proton and electron beams.
Date: June 1, 2010
Creator: Stancari, G.; Drozhdin, A.I.; Kuznetsov, G.; Shiltsev, V.; Still, D.A.; Valishev, A. et al.
Object Type: Article
System: The UNT Digital Library
Well-To-Wheels Analysis of Landfill Gas-Based Pathways and Their Addition to the Greet Model. (open access)

Well-To-Wheels Analysis of Landfill Gas-Based Pathways and Their Addition to the Greet Model.

Today, approximately 300 million standard cubic ft/day (mmscfd) of natural gas and 1600 MW of electricity are produced from the decomposition of organic waste at 519 U.S. landfills (EPA 2010a). Since landfill gas (LFG) is a renewable resource, this energy is considered renewable. When used as a vehicle fuel, compressed natural gas (CNG) produced from LFG consumes up to 185,000 Btu of fossil fuel and generates from 1.5 to 18.4 kg of carbon dioxide-equivalent (CO{sub 2}e) emissions per million Btu of fuel on a 'well-to-wheel' (WTW) basis. This compares with approximately 1.1 million Btu and 78.2 kg of CO{sub 2}e per million Btu for CNG from fossil natural gas and 1.2 million Btu and 97.5 kg of CO{sub 2}e per million Btu for petroleum gasoline. Because of the additional energy required for liquefaction, LFG-based liquefied natural gas (LNG) requires more fossil fuel (222,000-227,000 Btu/million Btu WTW) and generates more GHG emissions (approximately 22 kg CO{sub 2}e /MM Btu WTW) if grid electricity is used for the liquefaction process. However, if some of the LFG is used to generate electricity for gas cleanup and liquefaction (or compression, in the case of CNG), vehicle fuel produced from LFG can have no fossil …
Date: June 30, 2010
Creator: Mintz, M.; Han, J.; Wang, M.; Saricks, C. & Systems, Energy
Object Type: Report
System: The UNT Digital Library
No Prejudice in Space (open access)

No Prejudice in Space

We present a summary of recent results obtained from a scan of the 19-dimensional parameter space of the pMSSM and its implications for dark matter searches. We have generated a large set of points in parameter space (which we call 'models') for the 19-parameter CP-conserving pMSSM, where MFV has been assumed. We subjected these models to numerous experimental and theoretical constraints to obtain a set of {approx}68 K models which are consistent with existing data. We attempted to be somewhat conservative in our implementation of these constraints; in particular we only demanded that the relic density of the LSP not be greater than the measured value of {Omega}H{sup 2} for non-baryonic dark matter, rather than assuming that the LSP must account for the entire observed relic density. Examining the properties of the neutralinos in these models, we find that many are relatively pure gauge eigenstates with Higgsinos being the most common, followed by Winos. The relative prevalence of Higgsino and Wino LSPs leads many of our models to have a chargino as nLSP, often with a relatively small mass splitting between this nLSP and the LSP; this has important consequences in both collider and astroparticle phenomenology. We find that, in …
Date: August 26, 2010
Creator: Cotta, R. C.; Gainer, J. S.; Hewett, J. L. & Rizzo, T. G.
Object Type: Article
System: The UNT Digital Library
UC Merced Center for Computational Biology Final Report (open access)

UC Merced Center for Computational Biology Final Report

Final report for the UC Merced Center for Computational Biology. The Center for Computational Biology (CCB) was established to support multidisciplinary scientific research and academic programs in computational biology at the new University of California campus in Merced. In 2003, the growing gap between biology research and education was documented in a report from the National Academy of Sciences, Bio2010 Transforming Undergraduate Education for Future Research Biologists. We believed that a new type of biological sciences undergraduate and graduate programs that emphasized biological concepts and considered biology as an information science would have a dramatic impact in enabling the transformation of biology. UC Merced as newest UC campus and the first new U.S. research university of the 21st century was ideally suited to adopt an alternate strategy - to create a new Biological Sciences majors and graduate group that incorporated the strong computational and mathematical vision articulated in the Bio2010 report. CCB aimed to leverage this strong commitment at UC Merced to develop a new educational program based on the principle of biology as a quantitative, model-driven science. Also we expected that the center would be enable the dissemination of computational biology course materials to other university and feeder institutions, …
Date: November 30, 2010
Creator: Colvin, Michael & Watanabe, Masakatsu
Object Type: Report
System: The UNT Digital Library
A Single-Shot Method for Measuring Femtosecond Bunch Length in Linac-Based Free-Electron Lasers (open access)

A Single-Shot Method for Measuring Femtosecond Bunch Length in Linac-Based Free-Electron Lasers

There is growing interest in the generation and characterization of femtosecond and subfemtosecond pulses from linac-based free-electron lasers (FELs). In this report, following the method of Ricci and Smith [Phys. Rev. ST Accel. Beams 3, 032801 (2000)], we investigate the measurement of the longitudinal bunch profile of an ultrashort electron bunch produced by these FELs. We show that this method can be applied in a straightforward manner at x-ray FEL facilities such as the Linac Coherent Light Source by slightly adjusting the second bunch compressor followed by running the bunch on an rf zero-crossing phase of the final linac. We find that the linac wakefield strongly perturbs the measurement, and through analysis show that it can be compensated in a simple way. We demonstrate the effectiveness of this method and wakefield compensation through numerical simulations, including effects of coherent synchrotron radiation and longitudinal space charge. When used in conjunction with a high-resolution electron spectrometer, this method potentially reveals the temporal profile of the electron beam down to the femtosecond and subfemotsecond scale.
Date: August 26, 2010
Creator: Huang, Z.; Bane, K.; Ding, Y. & Emma, P.
Object Type: Article
System: The UNT Digital Library
Eliminating Electricity Deficit through Energy Efficiency in India:  An Evaluation of Aggregate Economic and Carbon Benefits (open access)

Eliminating Electricity Deficit through Energy Efficiency in India: An Evaluation of Aggregate Economic and Carbon Benefits

Electricity demand has consistently exceeded available supply in India. While the electricity deficit varies across states, nationally it was estimated to be of the order of 12percent on peak and 11percent for electricity during 2008-09. This paper explores a demand-side focused potential for energy efficiency improvement to eliminate the electricity deficit compared to a business as usual (BAU) supply-side focused scenario. The limited availability of finance and other legal and administrative barriers have constrained the construction of new power plant capacity in India. As a result, under the BAU scenario, India continues to face an electricity deficit beyond the end of the Twelfth Five Year Plan. The demand-side cost-effective potential achieved through replacement of new electricity-using products, however, is large enough to eliminate the deficit as early as 2013 and subsequently reduce the future construction of power plants and thus reduce air pollutant emissions. Moreover, energy efficiency improvements cost a fraction of the cost for new supply and can lead to a substantial increase in India's economic output or gross domestic product (GDP). Eliminating the deficit permits businesses that have experienced electricity cutbacks to restore production. We estimate the size of the cumulative production increase in terms of the contribution …
Date: April 30, 2010
Creator: Sathaye, Jayant & Gupta, Arjun
Object Type: Report
System: The UNT Digital Library
Measurement of the $WW+WZ$ Production Cross Section Using a Matrix Element Technique in Lepton + Jets Events (open access)

Measurement of the $WW+WZ$ Production Cross Section Using a Matrix Element Technique in Lepton + Jets Events

We present a measurement of the WW + WZ production cross section observed in a final state consisting of an identified electron or muon, two jets, and missing transverse energy. The measurement is carried out in a data sample corresponding to up to 4.6 fb{sup -1} of integrated luminosity at {radical}s = 1.96 TeV collected by the CDF II detector. Matrix element calculations are used to separate the diboson signal from the large backgrounds. The WW + WZ cross section is measured to be 17.4 {+-} 3.3 pb, in agreement with standard model predictions. A fit to the dijet invariant mass spectrum yields a compatible cross section measurement.
Date: August 1, 2010
Creator: Aaltonen, T.; Phys., /Helsinki Inst. of; Alvarez Gonzalez, B.; Phys., /Oviedo U. /Cantabria Inst. of; Amerio, S.; /INFN, Padua et al.
Object Type: Article
System: The UNT Digital Library

Solid State Neutron Detector - A Review of Status

None
Date: April 19, 2010
Creator: Mukhopadhyay, Sanjoy
Object Type: Presentation
System: The UNT Digital Library

Renewable Resources for Hydrogen

This presentation provides an overview of renewable resources for hydrogen. It was presented at the National Hydrogen Association Hydrogen Conference & Expo in Long Beach, CA, May 3-6, 2010.
Date: May 3, 2010
Creator: Jalalzadeh-Azar, A. A.
Object Type: Presentation
System: The UNT Digital Library
Observation in the MINOS far detector of the shadowing of cosmic rays by the sun and moon (open access)

Observation in the MINOS far detector of the shadowing of cosmic rays by the sun and moon

The shadowing of cosmic ray primaries by the the moon and sun was observed by the MINOS far detector at a depth of 2070 mwe using 83.54 million cosmic ray muons accumulated over 1857.91 live-days. The shadow of the moon was detected at the 5.6 {sigma} level and the shadow of the sun at the 3.8 {sigma} level using a log-likelihood search in celestial coordinates. The moon shadow was used to quantify the absolute astrophysical pointing of the detector to be 0.17 {+-} 0.12{sup o}. Hints of Interplanetary Magnetic Field effects were observed in both the sun and moon shadow.
Date: August 1, 2010
Creator: Adamson, P.; Andreopoulos, C.; Ayres, D. S.; Backhouse, C.; Barr, G.; Barrett, W. L. et al.
Object Type: Article
System: The UNT Digital Library
Transient Heat Transfer Analysis for Ion-Exchange Waste Removal Process (open access)

Transient Heat Transfer Analysis for Ion-Exchange Waste Removal Process

The small column ion exchange (SCIX) process treats low curie salt (LCS) waste before feeding it to the saltstone facility to be made into grout. Through this process, radioactive cesium from the salt solution is absorbed into the CST bed. A CST column loaded with radioactive cesium will generate significant heat from radiolytic decay. If engineering designs of the CST sorption column can not handle this thermal load, hot spots may develop locally within the column and degrade the performance of the ion-exchange process. The CST starts to degrade at about 80 to 85 C, and the CST completely changes to another material above 120 C. In addition, the process solution will boil around 130 C. If the column boiled dry, the sorbent could plug the column and require replacement of the column module. The objective of the present work is to compute temperature distributions across the column as a function of transit time after the initiation of accidents when there is loss of the salt solution flow in the CST column under abnormal conditions of the process operations. In this situation, the customer requested that the calculations should be conservative in that the model results would show the maximum …
Date: July 12, 2010
Creator: Lee, S.
Object Type: Article
System: The UNT Digital Library

Business Case for CNG in Municipal Fleets

Presentation about compressed natural gas in municipal fleets, assessing investment profitability, the VICE model, base-case scenarios, and pressing questions for fleet owners.
Date: July 27, 2010
Creator: Johnson, C.
Object Type: Presentation
System: The UNT Digital Library
Characterization of electron microscopes with binary pseudo-random multilayer test samples (open access)

Characterization of electron microscopes with binary pseudo-random multilayer test samples

We discuss the results of SEM and TEM measurements with the BPRML test samples fabricated from a BPRML (WSi2/Si with fundamental layer thickness of 3 nm) with a Dual Beam FIB (focused ion beam)/SEM technique. In particular, we demonstrate that significant information about the metrological reliability of the TEM measurements can be extracted even when the fundamental frequency of the BPRML sample is smaller than the Nyquist frequency of the measurements. The measurements demonstrate a number of problems related to the interpretation of the SEM and TEM data. Note that similar BPRML test samples can be used to characterize x-ray microscopes. Corresponding work with x-ray microscopes is in progress.
Date: July 9, 2010
Creator: Yashchuk, Valeriy V; Conley, Raymond; Anderson, Erik H.; Barber, Samuel K.; Bouet, Nathalie; McKinney, Wayne R. et al.
Object Type: Article
System: The UNT Digital Library
Fabrication and Comparison of Fuels for Advanced Gas Reactor Irradiation Tests (open access)

Fabrication and Comparison of Fuels for Advanced Gas Reactor Irradiation Tests

As part of the program to demonstrate TRISO-coated fuel for the Next Generation Nuclear Plant, a series of irradiation tests of Advanced Gas Reactor (AGR) fuel are being performed in the Advanced Test Reactor (ATR) at the Idaho National Laboratory. In the first test, called “AGR-1,” graphite compacts containing approximately 300,000 coated particles were irradiated from December 2006 until November 2009. Development of AGR-1 fuel sought to replicate the properties of German TRISO-coated particles. No particle failures were seen in the nearly 3-year irradiation to a burn up of 19%. The AGR-1 particles were coated in a two-inch diameter coater. Following fabrication of AGR-1 fuel, process improvements and changes were made in each of the fabrication processes. Changes in the kernel fabrication process included replacing the carbon black powder feed with a surface-modified carbon slurry and shortening the sintering schedule. AGR-2 TRISO particles were produced in a six-inch diameter coater using a change size about twenty-one times that of the two-inch diameter coater used to coat AGR-1 particles. Changes were also made in the compacting process, including increasing the temperature and pressure of pressing and using a different type of press. Irradiation of AGR-2 fuel began in late spring 2010. …
Date: October 1, 2010
Creator: Phillips, Jeffrey; Barnes, Charles & Hunn, John
Object Type: Article
System: The UNT Digital Library
Limiting Accretion onto Massive Stars by Fragmentation-Induced Starvation (open access)

Limiting Accretion onto Massive Stars by Fragmentation-Induced Starvation

Massive stars influence their surroundings through radiation, winds, and supernova explosions far out of proportion to their small numbers. However, the physical processes that initiate and govern the birth of massive stars remain poorly understood. Two widely discussed models are monolithic collapse of molecular cloud cores and competitive accretion. To learn more about massive star formation, we perform simulations of the collapse of rotating, massive, cloud cores including radiative heating by both non-ionizing and ionizing radiation using the FLASH adaptive mesh refinement code. These simulations show fragmentation from gravitational instability in the enormously dense accretion flows required to build up massive stars. Secondary stars form rapidly in these flows and accrete mass that would have otherwise been consumed by the massive star in the center, in a process that we term fragmentation-induced starvation. This explains why massive stars are usually found as members of high-order stellar systems that themselves belong to large clusters containing stars of all masses. The radiative heating does not prevent fragmentation, but does lead to a higher Jeans mass, resulting in fewer and more massive stars than would form without the heating. This mechanism reproduces the observed relation between the total stellar mass in the cluster …
Date: August 25, 2010
Creator: Peters, Thomas; /ZAH, Heidelberg; Klessen, Ralf S.; /ZAH, Heidelberg /KIPAC, Menlo Park; Mac Low, Mordecai-Mark; Hist., /Amer. Museum Natural et al.
Object Type: Article
System: The UNT Digital Library
CIM-EARTH: Community Integrated Model of Economic and Resource Trajectories for Humankind. (open access)

CIM-EARTH: Community Integrated Model of Economic and Resource Trajectories for Humankind.

Climate change is a global problem with local climatic and economic impacts. Mitigation policies can be applied on large geographic scales, such as a carbon cap-and-trade program for the entire U.S., on medium geographic scales, such as the NOx program for the northeastern U.S., or on smaller scales, such as statewide renewable portfolio standards and local gasoline taxes. To enable study of the environmental benefits, transition costs, capitalization effects, and other consequences of mitigation policies, we are developing dynamic general equilibrium models capable of incorporating important climate impacts. This report describes the economic framework we have developed and the current Community Integrated Model of Economic and Resource Trajectories for Humankind (CIM-EARTH) instance.
Date: January 1, 2010
Creator: Elliott, J.; Foster, I.; Judd, K.; Moyer, E.; Munson, T.; Chicago, Univ. of et al.
Object Type: Report
System: The UNT Digital Library
Check Burner Air to Fuel Ratios (International Fact Sheet), Energy Tips-Process Heating, Process Heating Tip Sheet #2c (open access)

Check Burner Air to Fuel Ratios (International Fact Sheet), Energy Tips-Process Heating, Process Heating Tip Sheet #2c

This English/Chinese international tip sheet provides information for optimizing efficiency of industrial process heating systems and includes measurements in metric units.
Date: October 1, 2010
Creator: unknown
Object Type: Report
System: The UNT Digital Library
High Throughput Identification, Purification and Structural Characterization of Water Soluble Protein Complexes in Desulfovibrio vulgaris (open access)

High Throughput Identification, Purification and Structural Characterization of Water Soluble Protein Complexes in Desulfovibrio vulgaris

Our scheme for the tagless purification of water soluble complexes. 10 g of protein from a crude bacterial extract is first fractionated by ammonium sulfate precipitation and then by a series of chromatographic steps: anion exchange (IEX), hydrophobic interaction (HIC), and finally size exclusion (Gel Filtration). Fractions from the last chromatography step are trypsin digested and peptides labeled with iTRAQ reagents to allow multiplexing and quantitation during mass spectrometric analysis. Elution profiles of identified proteins are then subjected to clustering analysis.
Date: May 17, 2010
Creator: Dong,, Ming; Han, Bong-Gyoon; Liu, Hui-Hai; Malik, J.; Geller, Jil; Yang, Li et al.
Object Type: Report
System: The UNT Digital Library
Undulator Long Coil Measurement System Tests (open access)

Undulator Long Coil Measurement System Tests

The first and second field integrals in the LCLS undulators must be below a specified limit. To accurately measure the field integrals, a long coil system is used. This note describes a set of tests which were used to check the performance of the long coil system. A long coil system was constructed to measure the first and second field integrals of the LCLS undulators. The long coil measurements of the background fields were compared to field integrals obtained by sampling the background fields and numerically calculating the integrals. This test showed that the long coil has the sensitivity required to measure at the levels specified for the field integrals. Tests were also performed by making long coil measurements of short magnets of known strength placed at various positions The long coil measurements agreed with the known field integrals obtained by independent measurements and calculation. Our tests showed that the long coil measurements are a valid way to determine whether the LCLS undulator field integrals are below the specified limits.
Date: November 24, 2010
Creator: Wolf, Zachary & Levashov, Yurii
Object Type: Report
System: The UNT Digital Library
Nonlinear Gyrokinetics: A Powerful Tool for the Description of Microturbulence in Magnetized Plasmas (open access)

Nonlinear Gyrokinetics: A Powerful Tool for the Description of Microturbulence in Magnetized Plasmas

Gyrokinetics is the description of low-frequency dynamics in magnetized plasmas. In magnetic-confinement fusion, it provides the most fundamental basis for numerical simulations of microturbulence; there are astrophysical applications as well. In this tutorial, a sketch of the derivation of the novel dynamical system comprising the nonlinear gyrokinetic (GK) equation (GKE) and the coupled electrostatic GK Poisson equation will be given by using modern Lagrangian and Lie perturbation methods. No background in plasma physics is required in order to appreciate the logical development. The GKE describes the evolution of an ensemble of gyrocenters moving in a weakly inhomogeneous background magnetic field and in the presence of electromagnetic perturbations with wavelength of the order of the ion gyroradius. Gyrocenters move with effective drifts, which may be obtained by an averaging procedure that systematically, order by order, removes gyrophase dependence. To that end, the use of the Lagrangian differential one-form as well as the content and advantages of Lie perturbation theory will be explained. The electromagnetic fields follow via Maxwell's equations from the charge and current density of the particles. Particle and gyrocenter densities differ by an important polarization effect. That is calculated formally by a "pull-back" (a concept from differential geometry) of …
Date: September 27, 2010
Creator: Krommes, John E.
Object Type: Article
System: The UNT Digital Library
Soft QCD at Tevatron (open access)

Soft QCD at Tevatron

Experimental studies of soft Quantum Chromodynamics (QCD) at Tevatron are reported in this note. Results on inclusive inelastic interactions, underlying events, double parton interaction and exclusive diffractive production and their implications to the Large Hadron Collider (LHC) physics are discussed.
Date: June 1, 2010
Creator: Rangel, Murilo
Object Type: Article
System: The UNT Digital Library
3-D Mapping Technologies for High Level Waste Tanks (open access)

3-D Mapping Technologies for High Level Waste Tanks

This research investigated four techniques that could be applicable for mapping of solids remaining in radioactive waste tanks at the Savannah River Site: stereo vision, LIDAR, flash LIDAR, and Structure from Motion (SfM). Stereo vision is the least appropriate technique for the solids mapping application. Although the equipment cost is low and repackaging would be fairly simple, the algorithms to create a 3D image from stereo vision would require significant further development and may not even be applicable since stereo vision works by finding disparity in feature point locations from the images taken by the cameras. When minimal variation in visual texture exists for an area of interest, it becomes difficult for the software to detect correspondences for that object. SfM appears to be appropriate for solids mapping in waste tanks. However, equipment development would be required for positioning and movement of the camera in the tank space to enable capturing a sequence of images of the scene. Since SfM requires the identification of distinctive features and associates those features to their corresponding instantiations in the other image frames, mockup testing would be required to determine the applicability of SfM technology for mapping of waste in tanks. There may be …
Date: August 31, 2010
Creator: Marzolf, A. & Folsom, M.
Object Type: Article
System: The UNT Digital Library
High-efficiency 5000 lines/mm multilayer-coated blazed grating for EUV wavelengths (open access)

High-efficiency 5000 lines/mm multilayer-coated blazed grating for EUV wavelengths

Volume x-ray gratings consisting of a multilayer coating deposited on a blazed substrate can diffract with very high efficiency even in high orders if diffraction conditions in-plane (grating) and out-of-plane (Bragg multilayer) are met simultaneously. This remarkable property however depends critically on the ability to create a structure with near atomic perfection. In this work we report on a method to produce these structures. We report measurements that show, for a 5000 l/mm grating diffracting in the 3rd order, a diffraction efficiency of 37.6percent at a wavelength of 13.6 nm, close to the theoretical maximum. This work now shows a direct route to achieving high diffraction efficiency in high order at wavelengths throughout the soft x-ray energy range.
Date: April 19, 2010
Creator: Voronov, Dmitriy; Ahn, Minseung; Anderson, Erik; Cambie, Rossana; Chang, Chih-Hao; Gullikson, Eric et al.
Object Type: Article
System: The UNT Digital Library