A letter report issued by the Government Accountability Office with an abstract that begins "Since the mid-1990s, the Navy and Marine Corps have studied ways to better protect landing forces. As new operational concepts evolved, the Marine Corps identified requirements for naval surface fire support and the Navy began developing two systems to meet these needs--the Extended Range Munition for existing classes of ships and the future Zumwalt class destroyer. GAO was asked to address (1) whether requirements for fire support have been established and (2) the Navy's progress on the Extended Range Munition, Zumwalt class destroyer, and follow-on systems. GAO also analyzed whether these Navy systems fulfill the requirements and whether gaps remain. To address these objectives GAO analyzed key documents on requirements and programs and held discussions with officials from the Navy and Marine Corps as well as other interested organizations."

Correspondence issued by the Government Accountability Office with an abstract that begins "During recent congressional hearings and in public speeches, statements made by the National Credit Union Administration's (NCUA) Chairman and another board member raised congressional interest in the ability of NCUA to collect and objectively analyze data on credit union membership and executive compensation. More generally, these statements also raised issues about the agency's overall vigilance as a regulator and the independence and objectivity of NCUA's board and senior staff from the industry being regulated. As a result, Congress asked us to expand upon our current work looking at the tax-exempt status of credit unions to include a review of governance policies and procedures for NCUA's board of directors and senior staff and more specifically how the policies and procedures address independence and objectivity issues. This correspondence (1) compares controls and related procedures applicable to NCUA that help ensure the independence and objectivity of its board members with those of other federal financial regulatory agencies and relevant recommended management practices identified in academic and industry literature and (2) describes NCUA's use of Schedule C staff compared with that of other federal financial regulatory agencies."

A letter report issued by the Government Accountability Office with an abstract that begins "Medicare pays for surgical procedures performed at ambulatory surgical centers (ASC) and hospital outpatient departments through different payment systems. Although they perform a similar set of procedures, no comparison of ASC and hospital outpatient per-procedure costs has been conducted. The Medicare Prescription Drug, Improvement, and Modernization Act of 2003 directed GAO to compare the relative costs of procedures furnished in ASCs to the relative costs of those procedures furnished in hospital outpatient departments, in particular, how accurately the payment groups used in the hospital outpatient prospective payment system (OPPS) reflect the relative costs of procedures performed in ASCs. To do this, GAO collected data from ASCs through a survey. GAO also obtained hospital outpatient data from the Centers for Medicare & Medicaid Services (CMS)."

A letter report issued by the Government Accountability Office with an abstract that begins "Under 10 U.S.C. 2466, the military departments and defense agencies may use no more than 50 percent of annual depot maintenance funding for work performed by private-sector contractors. The Department of Defense (DOD) must submit a report to Congress annually on the allocation of depot maintenance funding between the public and private sectors for the preceding fiscal year and projected distribution for the current and ensuing fiscal years for each of the armed forces and defense agencies. As required by Section 2466, GAO reviewed the report submitted in April 2006 and is, with this report, submitting its view to Congress on whether (1) the military departments and defense agencies complied with the 50-50 requirement for fiscal 2005 and (2) the projections for fiscal years 2006 and 2007 represent reasonable estimates. GAO obtained data used to develop the April 2006 report, conducted site visits, and reviewed supporting documentation."

A letter report issued by the Government Accountability Office with an abstract that begins "In the Transportation, Treasury, Housing and Urban Development, the Judiciary, the District of Columbia, and Independent Agencies Appropriations Act, 2006, Congress mandated that GAO conduct a nationwide study on the use of eminent domain by state and local governments. This report provides information on (1) the purposes for and extent to which eminent domain can be and has been used; (2) the process states and select localities across the country use to acquire land, including by eminent domain; (3) how the use of eminent domain has affected individuals and communities in select localities; and (4) the changes state legislatures made to laws governing the use of eminent domain from June 2005 through July 2006. To address these objectives, GAO reviewed relevant provisions in federal, state, and local laws; conducted site visits to various redevelopment projects where eminent domain was used; and interviewed multiple national associations of local and state government officials and planning professionals, national public interest groups, and national property rights groups to gain their perspectives on the use of eminent domain and its effect on communities and property owners. The Department of Transportation provided …

A letter report issued by the Government Accountability Office with an abstract that begins "Many U.S. communities face difficulties attracting physicians. To address this problem, states and federal agencies have turned to foreign physicians who have just completed graduate medical education in the United States under J-1 visas. Ordinarily, these physicians must return home after completing their programs, but this requirement can be waived at the request of a state or federal agency if the physician agrees to practice in an underserved area. In 1996, GAO reported that J-1 visa waivers had become a major source of physicians for underserved areas but were not well coordinated with Department of Health and Human Services (HHS) programs for addressing physician shortages. GAO was asked to examine (1) the number of waivers requested by states and federal agencies; (2) waiver physicians' practice specialties, settings, and locations; and (3) the extent to which waiver physicians are accounted for in HHS's efforts to address physician shortages. GAO surveyed states and federal agencies about waivers they requested in fiscal years 2003-2005 and reviewed HHS data."

A letter report issued by the Government Accountability Office with an abstract that begins "Legislative and regulatory changes have blurred distinctions between credit unions and other depository institutions and raised questions about the tax-exempt status of credit unions. This report (1) assesses the effect of the Credit Union Membership Access Act on credit union membership and charters, (2) reviews the National Credit Union Administration's (NCUA) efforts to expand services to low- and moderate-income individuals, (3) compares rates offered by credit unions with comparably sized banks, (4) discusses unrelated business income tax issues, and (5) assesses transparency of credit union senior executive compensation. To address our objectives, we obtained NCUA data on credit union membership, charter changes, efforts to target those of modest means, and executive disclosure requirements. We also analyzed Federal Reserve Board's Survey of Consumer Finances and Internal Revenue Service data."

None

None

None

None

Executive Summary: Initially the funds were sufficient funds were awarded to support one graduate student and one post-doc. Lange, though other funds, also supported a graduate intern from ETH Zurich, Switzerland for a period of 6 months. The initial direction was to study the chemical solution deposition method to understand the microstructural and mechanical phenomena that currently limit the production of thick film, reliable superconductor wires. The study was focused on producing thicker buffer layer(s) on Ni-alloy substrates produced by the RABiTS method. It focused on the development of the microstructure during epitaxy, and the mechanical phenomena that produce cracks during dip-coating, pyrolysis (decomposition of precursors during heating), crystallization and epitaxy. The initial direction of producing thicker layers of a know buffer layer material was redirected by co-workers at ORNL, in an attempt to epitaxially synthesize a potential buffer layer material, LaMnO3, via the solution route. After a more than a period of 6 months that showed that the LaMnO3 reacted with the Ni-W substrate at temperatures that could produce epitaxy, reviewers at the annual program review strongly recommended that the research was not yielding positive results. The only positive result presented at the meeting was that much thicker films …

Spin dynamics in crossing a single depolarization resonance is a well-studied subject. One well-known example is that of Froissart and Stora in 1960. More is needed to complete the understanding, particularly of the transient effects, when crossing a single resonance, but question arises what happens if we cross two resonances or cross a single resonance twice. When a resonance is crossed twice, the particle's spin dynamics encounters two additional phenomena. First, the two crossings will interfere with each other, leading to an interference effect. Second, there will be a spin echo effect. We discuss these two effects in this report. Two proposals to test these effects experimentally are made at the end.

We study the processes e{sup +}e{sup -} {yields} (J/{psi}{gamma}{gamma}){gamma} and e{sup +}e{sup -} {yields} (J/{psi}{pi}{sup -}{pi}{sup +}){gamma} where the hard photon radiated from an initial e{sup +}e{sup -} collision with center-of-mass (CM) energy near 10.58 GeV is detected. In the final state J/{psi}{gamma}{gamma} we consider J/{psi}{pi}{sup 0}, J/{psi}{eta}, {chi}{sub c1}{gamma}, and {chi}c{sub 2}{gamma} candidates. The invariant mass of the hadronic final state defines the effective e{sup +}e{sup -} CM energy in each event, so these data can be compared with direct e{sup +}e{sup -} measurements. We report 90% CL upper limits for the integrated cross section times branching fractions of the J/{psi}{gamma}{gamma} channels in the Y (4260) mass region.

This program aims at improving the efficiency of advanced natural-gas reciprocating engines (ANGRE) by reducing piston and piston ring assembly friction without major adverse effects on engine performance, such as increased oil consumption and wear. An iterative process of simulation, experimentation and analysis has been followed towards achieving the goal of demonstrating a complete optimized low-friction engine system. In this program, a detailed set of piston and piston-ring dynamic and friction models have been adapted and applied that illustrate the fundamental relationships among mechanical, surface/material and lubricant design parameters and friction losses. Demonstration of low-friction ring-pack designs in the Waukesha VGF 18GL engine confirmed ring-pack friction reduction of 30-40%, which translates to total engine FEMP (friction mean effective pressure) reduction of 7-10% from the baseline configuration without significantly increasing oil consumption or blow-by flow. The study on surface textures, including roughness characteristics, cross hatch patterns, dimples and grooves have shown that even relatively small-scale changes can have a large effect on ring/liner friction, in some cases reducing FMEP by as much as 30% from a smooth surface case. The measured FMEP reductions were in good agreement with the model predictions. The combined analysis of lubricant and surface design indicates that …

Software for automated test equipment can be tedious and monotonous making it just as error-prone as other software. Active defect prevention and detection are also important for test applications. Incomplete or unclear requirements, a cryptic syntax used for some test applications—especially script-based test sets, variability in syntax or structure, and changing requirements are among the problems encountered in one tester. Such problems are common to all software but can be particularly problematic in test equipment software intended to test another product. Each of these issues increases the probability of error injection during test application development. This report describes a test application development tool designed to address these issues and others for a particular piece of test equipment. By addressing these problems in the development environment, the tool has powerful built-in defect prevention and detection capabilities. Regular expressions are widely used in the development tool as a means of formally defining test equipment requirements for the test application and verifying conformance to those requirements. A novel means of using regular expressions to perform range checking was developed. A reduction in rework and increased productivity are the results. These capabilities are described along with lessons learned and their applicability to other test …

Carbon coating has proven to be a successful approach toimprove the rate capability of LiFePO4 used in rechargeable Li-ionbatteries. Investigations of the microstructure of carbon coated LiFePO4after charge discharge cycling shows that the carbon surface layerremains intact over 100 cycles. We find micro cracks in the cycledmaterial that extend parallel to low indexed lattice planes. Ourobservations differ from observations made by other authors. However thedifferences between the orientations of crack surfaces in both studiescan be reconciled considering the location of weak bonds in the unit celland specimen geometry as well as elastic stress fields ofdislocation.

In early October 2006, the Liquid Waste Organization (LWO) began to consider decanting Tank 40 at the end of Sludge Batch 3 (SB3) processing and transferring the aqueous phase from the decant to Tank 51. This transfer would be done to decrease Tank 51 yield stress and facilitate the transfer of the contents of Tank 51 to Tank 40. The projected composition of Sludge Batch 4 (SB4) was adjusted by LWO to reflect the impact of the Tank 40 decant leading to new projected compositions for SB4, designated as the 10-04-06 and the 10-10-06 compositions. A comparison between these SB4 compositions and those provided in June 2006 indicates that the new compositions are slightly higher in Al2O3, Fe2O3, and U3O8 and slightly lower in SiO2. The most dramatic change, however, is the new projection's Na2O concentration, which is more than 4.5 wt% lower than the June 2006 projection. This is a significant change due to the frit development team's approach of aligning the Na2O concentration in a candidate frit to the Na2O content of the sludge. This approach enhances the projected operating window and the waste throughput potential for the resulting glass system while eliminating the potential for nepheline crystallization. …

None

None

The overall goal of the project was to test the PureVision biomass fractionation technology for making pulp from loblolly pine. A specific goal was to produce a pulp product that is comparable to pulp produced from the kraft process, while reducing the environmental effects of the kraft process, known to be a highly pollutant process. The overall goal of the project was met by using the biomass fractionation concept for making pulp product. This proof-of-concept study, done with Southern pine pinchips as feedstock, evaluated NaOH concentration and residence time as variables in single-stage cocurrent pulping process. It can be concluded that 1% NaOH is adequate for effective delignification using the PureVision process; this is about ⅓ of that used in the kraft process. Also, the PureVision process does not use sulfur-based chemicals such as N2S and hence, is environmentally more benign.

This Technical Support Document (TSD) describes the process and methodology for the development of the Advanced Energy Design Guide for Small Office Buildings (AEDG-SO), a design guidance document intended to provide recommendations for achieving 30% energy savings in small office buildings over levels contained in ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings. The AEDG-SO is the first in a series of guides being developed by a partnership of organizations, including the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IESNA), the New Buildings Institute (NBI), and the U.S. Department of Energy (DOE). Each of the guides in the AEDG series will provide recommendations and user-friendly design assistance to designers, developers and owners of small commercial buildings that will encourage steady progress towards net-zero energy buildings. The guides will provide prescriptive recommendation packages that are capable of reaching the energy savings target for each climate zone in order to ease the burden of the design and construction of energy-efficient small commercial buildings The AEDG-SO was developed by an ASHRAE Special Project committee (SP-102) made up of representatives of each of the partner …

KENO is a Monte Carlo criticality code that is maintained by Oak Ridge National Laboratory (ORNL). KENO is included in the SCALE (Standardized Computer Analysis for Licensing Evaluation) package. KENO is often used because it was specifically designed for criticality calculations. Because KENO has convenient geometry input, including the treatment of lattice arrays of materials, it is frequently used for production calculations. Monte Carlo N-Particle (MCNP) is a Monte Carlo transport code maintained by Los Alamos National Laboratory (LANL). MCNP has a powerful 3D geometry package and an extensive cross section database. It is a general-purpose code and may be used for calculations involving shielding or medical facilities, for example, but can also be used for criticality calculations. MCNP is becoming increasingly more popular for performing production criticality calculations. Both codes have their own specific advantages. After a criticality calculation has been performed with one of the codes, it is often desirable (or may be a safety requirement) to repeat the calculation with the other code to compare the important parameters using a different geometry treatment and cross section database. This manual conversion of input files between the two codes is labor intensive. The industry needs the capability of converting …

The energy grant provided the resources to evaluate the wind, hydro, biomass, geothermal and solar resource potential on all Penobscot Indian Naiton's Tribal lands. The two objectives address potential renewable energy resources available on tribal lands and energy efficiency measures to be taken after comprehensive energy audits of commercial facilities. Also, a Long Term Strategic Energy Plan was developed along with a plan to reduce high energy costs.