A letter report issued by the Government Accountability Office with an abstract that begins "The cost of administering human service programs has been a long-standing concern among policy makers interested in ensuring that federal programs are run in a cost-efficient manner so that federal funds go directly to helping vulnerable people. Little is known about how administrative costs compare among programs, or about opportunities to better manage these costs. GAO looked at (1) how administrative costs are defined and what rules govern federal and state participation in funding these costs; (2) what is known about the amounts of administrative spending and how they have changed over time; and (3) what opportunities exist at the federal level to help states balance cost savings with program effectiveness and integrity. GAO's review included seven programs: Adoption Assistance, Child Care and Development Fund (CCDF), Child Support Enforcement (CSE), food stamps, Foster Care, Temporary Assistance for Needy Families (TANF), and Unemployment Insurance (UI). To address the questions, GAO reviewed laws, analyzed spending data, and visited five states."

A letter report issued by the Government Accountability Office with an abstract that begins "Alternative mortgage products (AMPs) can make homes more affordable by allowing borrowers to defer repayment of principal or part of the interest for the first few years of the mortgage. Recent growth in AMP lending has heightened the importance of borrowers' understanding and lenders' management of AMP risks. This report discusses the (1) recent trends in the AMP market, (2) potential AMP risks for borrowers and lenders, (3) extent to which mortgage disclosures discuss AMP risks, and (4) federal and selected state regulatory response to AMP risks. To address these objectives, GAO used regulatory and industry data to analyze changes in AMP monthly payments; reviewed available studies; and interviewed relevant federal and state regulators and mortgage industry groups, and consumer groups."

None

This report provides a side-by-side comparison of the H.R. 2990 and S. 3850 bills’ major provisions.

This report describes the IQA and OMB's and the agencies information quality guidelines, noting how several key terms are defined, how risk-related information is to be treated, and how agencies correction process should be established.

This report discusses the civilian nuclear waste disposal and its most recent developments, Nuclear Utility Lawsuits, Nuclear Spent Fuel Legislation and current Policy and Regulation.

Report on immigration with a focus on border security and related legislation, considered by the 109th Congress.

These proceedings contain papers prepared for the 28th Seismic Research Review: Ground-Based Nuclear Explosion Monitoring Technologies, held 19-21 September, 2006 in Orlando, Florida. These papers represent the combined research related to ground-based nuclear explosion monitoring funded by the National Nuclear Security Administration (NNSA), Air Force Technical Applications Center (AFTAC), Air Force Research Laboratory (AFRL), US Army Space and Missile Defense Command, Comprehensive Nuclear-Test-Ban Treaty Organization (CTBTO), and other invited sponsors. The scientific objectives of the research are to improve the United States capability to detect, locate, and identify nuclear explosions. The purpose of the meeting is to provide the sponsoring agencies, as well as potential users, an opportunity to review research accomplished during the preceding year and to discuss areas of investigation for the coming year. For the researchers, it provides a forum for the exchange of scientific information toward achieving program goals, and an opportunity to discuss results and future plans. Paper topics include: seismic regionalization and calibration; detection and location of sources; wave propagation from source to receiver; the nature of seismic sources, including mining practices; hydroacoustic, infrasound, and radionuclide methods; on-site inspection; and data processing.

We report of the design, constrcution, commissioning, and beamtests of a prototype calorimeter. This calorimeter is of a novel design so as to equalize its response to electromagnetic and hadronic energy deposits of equal primary energy. Thus its response to jets is independent of the jet's electromagnetic versus hadronic composition. The beamtests show that the prototype satisfies the design requirements. The design, construction and the results of beamtests have been published in several papers in a refereed journal.

The remedial design/remedial action for Operable Unit 6-05 (Waste Area Group 6) and Operable Unit 10-04 (Waste Area Group 10) - collectively called Operable Unit 10-04 has been divided into four phases. Phase I consists of developing and implementing institutional controls at Operable Unit 10-04 sites and developing and implementing Idaho National Laboratory-wide plans for both institutional controls and ecological monitoring. Phase II will remediate sites contaminated with trinitrotoluene and Royal Demolition Explosive. Phase III will remediate lead contamination at a gun range, and Phase IV will remediate hazards from unexploded ordnance. This Phase III remedial Design/Remedial Action Work Plan addresses the remediation of lead-contaminated soils found at the Security Training Facility (STF)-02 Gun Range located at the Idaho National Laboratory. Remediation of the STF-02 Gun Range will include excavating contaminated soils; physically separating copper and lead for recycling; returning separated soils below the remediation goal to the site; stabilizing contaminated soils, as required, and disposing of the separated soils that exceed the remediation goal; encapsulating and disposing of creosote-contaminated railroad ties and power poles; removing and disposing of the wooden building and asphalt pads found at the STF-02 Gun Range; sampling and analyzing soil to determine the excavation requirements; …

The sputter deposition of coatings onto capsules of polymer and oxide shells as well as solid metal spheres is accomplished using a chambered substrate platform. Oxides and metal coatings are sputter deposited through a screen-aperture array onto a 0.3-1.2 mm diameter, solid spheres and hollow shells. Each shell is contained within its own individual chamber within a larger array. Ultrasonic vibration is the method used to produce a random bounce of each capsule within each chamber, in order to produce a coating with uniform thickness. Characterization of thin aluminum-oxide coated, platinum solid spheres and thicker copper-gold layer coated, hollow capsules (of both glass and polymer) show that uniform coatings can be produced using a screen-aperture chambered, substrate platform. Potential advantages of this approach compared to open-bounce pans include improved sample yield and reduced surface roughness from debris minimization. A process model for the coating growth on the capsules is developed to assess selection of the screen aperture based on the effects of sputter deposition parameters and the coating materials.

As their switching and power handling characteristics improve, solid-state devices are finding new applications in pulsed power. This is particularly true of applications that require fast trains of short duration pulses. High voltage (600-1200V) MOSFETs are especially well suited for use in these systems, as they can switch at significant peak power levels and are easily gated on and off very quickly. MOSFET operation at the shortest pulse durations is not constrained by the intrinsic capabilities of the MOSFET, but rather by the capabilities of the gate drive circuit and the system physical layout. This project sought to improve MOSFET operation in a pulsed power context by addressing these issues. The primary goal of this project is to improve the switching performance of power MOSFETs for use in high rep-rate, short pulse, high-power applications by improving the design of the gate drive circuits and the circuit layouts used in these systems. This requires evaluation of new commercial gate drive circuits and upgrading the designs of LLNL-developed circuits. In addition, these circuits must be tested with the fastest available high-voltage power MOSFETs.

None

None

This report documents results of LLNL's work in support of two studies being conducted by Sandia National Laboratories (SNL): the development of the Z-pinch driven inertial fusion energy (Z-IFE), and the use of Z-pinch driven inertial fusion as a neutron source to destroy actinides from fission reactor spent fuel. LLNL's efforts in FY06 included: (1) Development of a systems code for Z-IFE and use of the code to examine the operating parameter space in terms of design variables such as the Z-pinch driver energy, the chamber pulse repetition rate, the number of chambers making up the power plant, and the total net electric power of the plant. This is covered in Section 3 with full documentation of the model in Appendix A. (2) Continued development of innovative concepts for the design and operation of the recyclable transmission line (RTL) and chamber for Z-IFE. The work, which builds on our FY04 and FY05 contributions, emphasizes design features that are likely to lead to a more attractive power plant including: liquid jets to protect all structures from direct exposure to neutrons, rapid insertion of the RTL to maximize the potential chamber rep-rate, and use of cast flibe for the RTL to reduce …

To develop field, petrographic and geochemical criteria to allow high precision U-Pb dating of sedimentary minerals within rapidly deposited sequences of carbonate and clastic rocks.

Direct imaging of exoplanets is limited by bright quasi-static speckles in the point spread function (PSF) of the central star. This limitation can be reduced by subtraction of reference PSF images. We have developed an algorithm to construct an optimal reference PSF image from an arbitrary set of reference images. This image is built as a linear combination of all available images and is optimized independently inside multiple subsections of the image to ensure that the absolute minimum residual noise is achieved within each subsection. The algorithm developed is completely general and can be used with many high contrast imaging observing strategies, such as angular differential imaging (ADI), roll subtraction, spectral differential imaging, reference star observations, etc. The performance of the algorithm is demonstrated for ADI data. It is shown that for this type of data the new algorithm provides a gain in sensitivity by up 22 to a factor 3 at small separation over the algorithm previously used.

The 100-D-24 Sample Building Drywell waste site was a drywell that received drainage from a floor drain in the 119-D Sample Building. Confirmatory sampling was conducted on November 3, 2005. The waste site meets the remedial action objectives specified in the Remaining Sites ROD. The results of confirmatory sampling show that residual contaminant concentrations do not preclude any future uses and allow for unrestricted use of shallow zone soils. The results also demonstrate that residual contaminant concentrations are protective of groundwater and the Columbia River.

The topography, geology, hydrology, vegetation, and wildlife of the Oak Ridge Reservation (ORR) provide a complex and intricate array of resources that directly impact land stewardship and use decisions (Fig. 1). The purpose of this document is to consolidate general information regarding the natural resources and physical characteristics of the ORR. The ORR, encompassing 33,114 acres (13,401 ha) of federally owned land and three Department of Energy (DOE) installations, is located in Roane and Anderson Counties in east Tennessee, mostly within the corporate limits of the city of Oak Ridge and southwest of the population center of Oak Ridge. The ORR is bordered on the north and east by the population center of the city of Oak Ridge and on the south and west by the Clinch River/Melton Hill Lake impoundment. All areas of the ORR are relatively pristine when compared with the surrounding region, especially in the Valley and Ridge Physiographic Province (Fig. 2). From the air, the ORR is clearly a large and nearly continuous island of forest within a landscape that is fragmented by urban development and agriculture. Satellite imagery from 2006 was used to develop a land-use/land-cover cover map of the ORR and surrounding lands (Fig. …

A carbon credit market is developing in the United States. Information is needed by buyers and sellers of carbon credits so that the market functions equitably and efficiently. Analyses have been conducted to determine the optimal forest management regime to employ for each of the major commercial tree species so that profitability of timber production only or the combination of timber production and carbon sequestration is maximized. Because the potential of a forest ecosystem to sequester carbon depends on the tree species, site quality and management regimes utilized, analyses have determined how to optimize carbon sequestration by determining how to optimally manage each species, given a range of site qualities, discount rates, prices of carbon credits and other economic variables. The effects of a carbon credit market on the method and profitability of forest management, the cost of sequestering carbon, the amount of carbon that can be sequestered, and the amount of timber products produced has been determined.

The thesis of this extended abstract is simple. High productivity comes from high level infrastructures. To measure this, we introduce a methodology that goes beyond the tradition of timing software in serial and tuned parallel modes. We perform a classroom productivity study involving 29 students who have written a homework exercise in a low level language (MPI message passing) and a high level language (Star-P with MATLAB client). Our conclusions indicate what perhaps should be of little surprise: (1) the high level language is always far easier on the students than the low level language. (2) The early versions of the high level language perform inadequately compared to the tuned low level language, but later versions substantially catch up. Asymptotically, the analogy must hold that message passing is to high level language parallel programming as assembler is to high level environments such as MATLAB, Mathematica, Maple, or even Python. We follow the Kepner method that correctly realizes that traditional speedup numbers without some discussion of the human cost of reaching these numbers can fail to reflect the true human productivity cost of high performance computing. Traditional data compares low level message passing with serial computation. With the benefit of a …