Industries worldwide depend upon pumping systems for theirdaily operation. These systems account for nearly 20 percent of theworld's industrial electrical energy demand and range from 25-50 percentof the energy usage in certain industrial plant operations. Purchasedecisions for a pump and its related system components are typicallybased upon a low bid, rather than the cost to operate the system over itslifetime. Additionally, plant facilities personnel are typically focussedon maintaining existing pumping system reliability rather than optimizingthe systems for best energy efficiency. To ensure the lowest energy andmaintenance costs, equipment life, and other benefits, the systemcomponents must be carefully matched to each other, and remain sothroughout their working lives. Life Cycle Cost (LCC) analysis is a toolthat can help companies minimize costs and maximize energy efficiency formany types of systems, including pumping systems. Increasing industryawareness of the total cost of pumping system ownership through lifecycle cost analysis is a goal of the US Department of Energy (DOE). Thispaper will discuss what DOE and its industry partners are doing to createthis awareness. A guide book, Pump Life Cycle Costs: A Guide to LCCAnalysis for Pumping Systems, developed by the Hydraulic Institute (HI)and Europump (two pump manufacturer trade associations) with DOEinvolvement, will be overviewed. …

Results are presented from experiments relating to magnetic field generation and current amplification in the SSPX spheromak. The SSPX spheromak plasma is driven by DC coaxial helicity injection using a 2MJ capacitor bank. Peak toroidal plasma currents of up to 0.7MA and peak edge poloidal fields of 0.3T are produced; lower current discharges can be sustained up to 3.5msec. When edge magnetic fluctuations are reduced below 1% by driving the plasma near threshold, it is possible to produce plasmas with Te > 150eV, <{beta}{sub e}>-4% and core {chi}{sub e} {approx} 30m{sup 2}/s. Helicity balance for these plasmas suggests that sheath dissipation can be significant, pointing to the importance of maximizing the voltage on the coaxial injector. For most operational modes we find a stiff relationship between peak spheromak field and injector current, and little correlation with plasma temperature, which suggests that other processes than ohmic dissipation may limit field amplification. However, slowing spheromak buildup by limiting the initial current pulse increases the ratio of toroidal current to injected current and points to new operating regimes with more favorable current amplification.

Simple Linux Utility for Resource Management (SLURM) is an open source, fault-tolerant, and highly scalable cluster management and job scheduling system for Linux clusters of thousands of nodes. Components include machine status, partition management, job management, scheduling and stream copy modules. The design also includes a scalable, general-purpose communication infrastructure. This paper presents a overview of the SLURM architecture and functionality.

In preparation for ignition on the National Ignition Facility, the Lawrence Livermore National Laboratory's Inertial Confinement Fusion Program, working in collaboration with Los Alamos National Laboratory, Commissariat a lEnergie Atomique (CEA), and Laboratory for Laser Energetics at the University of Rochester, has performed a broad range of experiments on the Nova and Omega lasers to test the fundamentals of the NIF target designs. These studies have refined our understanding of the important target physics, and have led to many of the specifications for the NIF laser and the cryogenic ignition targets. Our recent work has been focused in the areas of hohlraum energetics, symmetry, shock physics, and target design optimization & fabrication.

No plant and animal species protected under the ESA, candidates for such protection, or species listed by the Washington state government were observed in the vicinity of the proposed sites. Piper's daisy may still occur in some of the burial grounds. This is a Washington State Sensitive plant species, and as such is a Level III resource under the Hanford Site Biological Resources Management Plan. Compensatory mitigation is appropriate for this species when adverse impacts cannot be avoided. The Ecological Compliance Assessment Project (ECAP) staff should consulted prior to the initiation of major work activities within areas where this species has been identified (218-E-12, 218-E-10). The stalked-pod and crouching milkvetch are relatively common throughout 200 West area, therefore even if the few individuals within the active burial grounds are disturbed, it is not likely that the overall local population will be adversely affected. The Watch List is the lowest level of listing for plant species of concern in the State of Washington. No adverse impacts to species or habitats of concern are expected to occur from routine maintenance within the active portions of the 218-W-4C, 218-W-4B, 218-W-3, 218-W-3A, and 218-W-5 burial grounds, as well as the portion of 218-E-12B currently …

The objective of this report is to discuss the degree of sorption and desorption of {sup 137}Cs and {sup 60}Co that may be associated with the granite bedrock and the ''popcorn'' cement drain system that underlie the Maine Yankee Containment Foundation. The purpose is to estimate how much retardation of these two radionuclides takes place in groundwater that flows in the near-field of the Containment Foundation, specifically with respect to contamination originating at the PAB Test Pit. Specific concerns revolve around the potential for the contamination originating near the PAB to create a radioactive dose to a hypothetical ''resident farmer'' using a well intercepting this water to exceed 4 millirems/yr.

In earlier work, we have described our experiences with the use of decision tree classifiers to identify radio-emitting galaxies with a bent-double morphology in the FIRST astronomical survey. We now extend this work to include ensembles of decision tree classifiers, including two algorithms developed by us. These algorithms randomize the decision at each node of the tree, and because they consider fewer candidate splitting points, are faster than other methods for creating ensembles. The experiments presented in this paper with our astronomy data show that our algorithms are competitive in accuracy, but faster than other ensemble techniques such as Boosting, Bagging, and Arcx4 with different split criteria.

We present equation of state results from impulsively stimulated light scattering (ISLS) experiments conducted in diamond anvil cells on pure supercritical fluids. We have made measurements on fluid H{sub 2}O (water), and CH{sub 3}OH (methanol). Sound speeds measured through ISLS have allowed us to refine existing potential models used in the exponential-6 (EXP-6) detonation product library [Fried, L. E., and Howard, W. M., J. Chem. Phys. 109 (17): 7338-7348 (1998).]. The refined models allow us to more accurately assess the chemical composition at the Chapman-Jouget (C-J) state of common energetic materials. We predict that water is present in appreciable quantities at the C-J state of energetic materials HMX, RDX, and nitro methane.

Pacific Northwest National Laboratory (PNNL) established an area monitoring dosimeter program in accordance with Article 514 of the U.S. Department of Energy (DOE) Radiological Control Manual (RCM) in January 1993. This program is to minimize the number of areas requiring issuance of personnel dosimeters and to demonstrate that doses outside Radiological Buffer Areas are negligible. In accordance with 10 CFR Part 835.402 (a) (1)-(4) and Article 511.1 of the PNNL Radiological Control Program Description, personnel dosimetry shall be provided to 1) radiological workers who are likely to receive at least 100 mrem annually, and 2) declared pregnant workers, minors, and members of the public who are likely to receive at least 50 mrem annually. Program results for calendar years 1993-2001 confirm that personnel dosimetry is not needed for individuals located in areas monitored by the program.

BNL could provide a Megawatt class neutrino beam from the AGS for very long baseline neutrino experiments. We have studied two possible approaches to upgrade the AGS to 1.0 MW beam power. The first is the linac option, comprising a new superconducting linac injector of 1.2 GeV, accelerating 9 x 10{sup 3} proton per pulse in the AGS to 28 GeV at 2.5 Hz. The second option is to extend the existing 200 MeV linac to 400 MeV. ramp the Booster to 2.5 GeV at 6 Hz. add a new 2.5 GeV accumulator ring in the AGS tunnel. and finally ramp the AGS to 28 GeV at 2.5 Hz. Due to the simplicity of the linac approach and minimum interference with the on going research program. the linac option is the preferred one.

We describe a gradiometer based on a high-transition temperature Superconducting Quantum Interference Device (SQUID) for improving the sensitivity of a SQUID-based biosensor. The first-derivative gradiometer, fabricated from a single layer of YBa{sub 2}Cu{sub 3}O{sub 7-x}, has a baseline of 480 {micro}m and a balance against uniform fields of 1 part in 150. Used in our SQUID ''microscope,'' it reduces parasitic magnetic fields generated by the measurement process to the level of the SQUID noise. The gradiometer-based microscope is two orders of magnitude more sensitive to super paramagnetic nanoparticles bound to biological targets than our earlier magnetometer-based microscope.

We have applied our simulation code "POSINST" to evaluatethe contribution to the growth rate of the electron-cloud instability inproton storage rings. Recent simulation results for the main features ofthe electron cloud in the storage ring of the Spallation Neutron Source(SNS) at Oak Ridge, and updated results for the Proton Storage Ring (PSR)at Los Alamos are presented in this paper. A key ingredient in our modelis a detailed description of the secondary emitted-electron energyspectrum. A refined model for the secondary emission process includingthe so-called true secondary, rediffused and backscattered electrons hasrecently been included in the electron-cloud code.

The moisture performance of three different classes of wall systems has been investigated in the context of the preliminary hygrothermal analysis of walls in Seattle. The results reported in this phase specifically address the moisture performance of walls designed with loads that have some unintentional water penetration. The results have been developed in a manner to present the relative performance of the walls in the same climate with similar water penetration effects. The analysis was performed with the best available input data. Several limitations should be recognized within the context of this study. Results showed that selection of wooden sheathing boards on interior vapor-tight assemblies does not significantly influence the performance of stucco-clad walls. A larger effect was observed when the interior vapor control is made vapor open. When continuous cavity ventilation is employed, the effect of the selection of the type of sheathing board on the hygrothermal performance of the wall was found to be negligible. When comparing oriented strand board sheathing performance against the performance of exterior grade gypsum, the differences are very significant in terms of the amount of moisture content present in the walls. Moisture content alone does not indicate their respective durability as durability is …

Industrial electrical motors account for two-thirds of theUS industrial electricity usage. Pumping systems account for an estimated25 percent of this electrical motor consumption, while pumping systems inuse in US chemical facilities consume over 37,000 GWh/year, based on USDepartment of Energy (DOE) data. A study funded by DOE estimatespotential energy savings within the chemical industry alone ofapproximately 20 percent, representing an energy savings of over 7,500GWh/year, through industrial pumping systems optimization using existing,proven techniques and technologies. This energy savings potentialrepresents significant cost savings potential for industrial facilities.Additionally, it has been shown that energy efficiency improvements toindustrial systems usually provide improved reliability, improvedproductivity, and reduced environmental costs.

The photochemical and photophysical properties of polypyridyl complexes of Ru, Os, and Re have been investigated by transient absorption, emission, resonance raman and infrared spectroscopies. The latter technique has been especially useful in defining the acceptor ligand in metal-to-ligand charge transfer (MLCT) excited states and probing the details of excited state electronic and molecular structure. Derivatives of these complexes have been attached to soluble polystyrene polymers. In the resulting metal complex polymer composites it has been possible to demonstrate long range energy transfer and the existence of an antenna effect and create a mimic for the active site in the photosynthetic membrane.

In this paper we present a news approach, based on a shifted Green function, to evaluate the electromagnetic field in a simulation of colliding beams. Unlike a conventional particle-mesh code, we use a method in which the computational mesh covers only the largest of the two colliding beams. This allows us to study long-range parasitic collisions accurately and efficiently. We have implemented this algorithm in a new parallel strong-strong beam-beam simulation code. As an application, we present a study of a beam sweeping scheme for the LBNL luminosity monitor of the Large Hadron Collider.

In prior studies of the current Shuttle Spacesuit (SSA), where basic fabric lay-ups were tested for shielding capabilities, it was found that the fabric portions of the suit give far less protection than previously estimated due to porosity and non-uniformity of fabric and LCVG components. In addition, overall material transmission properties were less than optimum. A number of alternate approaches are being tested to provide more uniform coverage and to use more efficient materials. We will discuss in this paper, recent testing of new material lay-ups/configurations for possible use in future spacesuit designs.

The purpose of this study is to respond to U.S. Department of Energy (DOE) Technical Direction Letter (TDL) 02-003 (Waisley 2001), which directs Bechtel SAIC Company, LLC (BSC) to complete a design study to recommend repository design options to support receipt and/or emplacement of any or all of the following: commercial spent nuclear fuel (CSNF), high-level radioactive waste (HLW), DOE-managed spent nuclear fuel (DSNF) (including naval spent nuclear fuel [SNF]), and immobilized plutonium (if available), as soon as practicable, but no later than 2010. From the possible design options, a recommended approach will be determined for further evaluation to support the preliminary design of the repository. This study integrates the results of the repository Design Evolution Study (Rowe 2002) with supporting studies concerning national transportation options (BSC 2002b) and Nevada transportation options (Gehner 2002). The repository Design Evolution Study documents the processes used to reevaluate the design, construction, operation, and cost of the repository in response to TDL 02-003 (Waisley 2001), and to determine possible repository conceptual design options. The transportation studies evaluate the national and Nevada transportation options that support the repository conceptual design options. An evaluation methodology was established, based on Program-level requirements developed for the study in …

The interactions of N2O with H-ZSM-5 and Fe-ZSM-5 have been investigated using infrared spectroscopy and temperature-programmed reaction. Fe-ZSM-5 samples with Fe/Al ratios of 0.17 and 0.33 were prepared by solid-state exchange. It was determined that most of the iron in the samples of Fe-ZSM-5 is in the form of isolated cations, which have exchanged with Bronsted acid H+ in H-ZSM-5. The infrared spectrum of N2O adsorbed on H-ZSM-5 at 298 K exhibits bands at 2226 and 1308 cm-1 associated with vibrations of the N-N and N-O bonds, respectively. The positions of these bands relative to those seen in the gas phase suggest that N2O adsorbs through the nitrogen end of the molecule. The heat of N2O adsorption in H-ZSM-5 is estimated to be 5 kcal/mol. In the case of Fe-ZSM-5, additional infrared bands are observed at 2282 and 1344 cm-1 due to the interactions of N2O with the iron cations. Here too, the directions of the shifts in the vibrational features relative to those for gas-phase N2O suggest that the molecule adsorbs through its nitrogen end. The heat of adsorption of N2O on the Fe sites is estimated to be 16 kcal/mol. The extent of N2O adsorption on Fe depends …

Auger electron spectroscopy and low-energy electron diffraction (LEED) provide basic information about the structure and composition of the fivefold surface of the quaternary quasicrystal, icosahedral Al67Pd4Mn21Ga8. Surface preparation techniques established previously for two of the icosahedral ternary alloys, Al-Pd-Mn and Al-Cu-Fe, appear to be similarly effective for Al-Pd-Mn-Ga. After annealing in the range 600-950 K, the surface concentration of Ga is constant and low. After annealing in the range 900-950 K, a good LEED pattern is obtained. LEED indicates that Ga changes the surface structure significantly.

This project develops Fuel-Flexible Reburning (FFR), which combines conventional reburning and Advanced Reburning (AR) technologies with an innovative method of delivering coal as the reburning fuel. The FFR can be retrofit to existing boilers and can be configured in several ways depending on the boiler, coal characteristics, and NO{sub x} control requirements. Fly ash generated by the technology will be a saleable byproduct for use in the cement and construction industries. FFR can also reduce NO{sub x} by 60%-70%, achieving an emissions level of 0.15 lb/10{sup 6} Btu in many coal-fired boilers equipped with Low NO{sub x} Burners. Total process cost is expected to be one third to one half of that for Selective Catalytic Reduction (SCR). Activities during reporting period included design, manufacture, assembly, and shake down of the coal gasifier and pilot-scale testing of the efficiency of coal gasification products in FFR. Tests were performed in a 300 kW Boiler Simulator Facility. Several coals with different volatiles content were tested. Data suggested that incremental increase in the efficiency of NO{sub x} reduction due to the gasification was more significant for less reactive coals with low volatiles content. Experimental results also suggested that the efficiency of NO{sub x} reduction …

Information processing in sensor networks, with many small processors, demands a theory of computation that allows the minimization of processing effort, and the distribution of this effort throughout the network. Graphical model theory provides a probabilistic theory of computation that explicitly addresses complexity and decentralization for optimizing network computation. The junction tree algorithm, for decentralized inference on graphical probability models, can be instantiated in a variety of applications useful for wireless sensor networks, including: sensor validation and fusion; data compression and channel coding; expert systems, with decentralized data structures, and efficient local queries; pattern classification, and machine learning. Graphical models for these applications are sketched, and a model of dynamic sensor validation and fusion is presented in more depth, to illustrate the junction tree algorithm.

None

This report describes work accomplished in the project, titled ''Development of Appropriate Resistance Spot Welding Practice for Transformation-Hardened Steels.'' The Phase 1 of the program involved development of in-situ temper diagrams for two gauges of representative dual-phase and martensitic grades of steels. The results showed that tempering is an effective way of reducing hold-time sensitivity (HTS) in hardenable high-strength sheet steels. In Phase 2, post-weld cooling rate techniques, incorporating tempering, were evaluated to reduce HTS for the same four steels. Three alternative methods, viz., post-heating, downsloping, and spike tempering, for HTS reduction were investigated. Downsloping was selected for detailed additional study, as it appeared to be the most promising of the cooling rate control methods. The downsloping maps for each of the candidate steels were used to locate the conditions necessary for the peak response. Three specific downslope conditions (at a fix ed final current for each material, timed for a zero-, medium-, and full-softening response) were chosen for further metallurgical and mechanical testing. Representative samples, were inspected metallographically, examining both local hardness variations and microstructures. The resulting downslope diagrams were found to consist largely of a C-curve. The softening observed in these curves, however, was not supported by subsequent …