This report discusses the broad-ranging provisions in Title IV of The Clean Air Act Amendments of 1990 (P.L. 101-549), which raise myriad implementation issues, particularly with respect to the system of tradable "allowances."

This report discusses protocols and treaties designed and implemented to protect Antarctica as a haven for environmental research, preservation, and conservation, as well as related legislation and Congressional efforts.

The October 24, 1995 meeting between President Bill Clinton and China's President Jiang Zemin helped to ease the crisis in U.S.-PRC-Taiwan relations that ensued from Beijing's harsh response to Taiwan President Lee Teng-hui's June 1995 visit to Cornell University.

The United States has pressed China over the past several years to improve its enforcement of U.S. intellectual property rights (IPR) in China and to provide greater market access to intellectual property-related products, such as computer software, CDs, and audio-visual products. Trade tensions over these issues nearly led the United States to impose trade sanctions against China in 1992 and 1995. In March 1995, the United States and China signed a new and detailed IPR trade agreement, which pledges China to substantially reform its IPR enforcement regime and improve market access. This report examines the U.S.-Chinese IPR dispute and analyzes the implications of the new IPR agreement on future U.S.-Chinese trade relations

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Dan Morales, regarding a legal question submitted for clarification: Whether a microwave oven in commercial food vending service must be surveyed every six months and related questions.

Plans are to determine the Cs-137 content of low-level waste packages generated in High-Level Waste by measuring the radiation level at a specified distance from the package with a hand-held radiation instrument. The measurement taken at this specified distance, either 3 or 5 feet, is called the far-field measurement. This report documents a method for adjusting the gamma exposure rate (mR/hr) reading used in dose-to-curie determinations when the far-field measurement equals the background reading. This adjustment is necessary to reduce the conservatism resulting from using a minimum detection limit exposure rate for the dose-to-curie determination for the far-field measurement position. To accomplish this adjustment, the near-field (5 cm) measurement is multiplied by a geometry correction factor to obtain an estimate of the far field exposure rate (which is below instrument sensitivity). This estimate of the far field exposure rate is used to estimate the Cs-137 curie content of the package. This report establishes the geometry correction factors for the dose-to-curie determination when the far-field gamma exposure measurement equals the background reading. This report also provides a means of demonstrating compliance to 1S Manual requirements for exposure rate readings at different locations from waste packages while specifying only two measurement positions. …

Two of the most important chemically reactive tropospheric gases are ozone (O{sub 3}) and the hydroxyl radical (OH). Although ozone in the stratosphere is a necessary protector against the sun`s radiation, tropospheric ozone is actually a pollutant which damages materials and vegetation, acts as a respiratory irritant, and is a greenhouse gas. One of the two main sources of ozone in the troposphere is photochemical production. The photochemistry is initiated when hydrocarbons and carbon monoxide (CO) react with nitrogen oxides (NO{sub x} = NO + NO{sub 2}) in the presence of sunlight. Reaction with the hydroxyl radical, OH, is the main sink for many tropospheric gases. The hydroxyl radical is highly reactive and has a lifetime on the order of seconds. Its formation is initiated by the photolysis of tropospheric ozone. Tropospheric chemistry involves a complex, non-linear set of chemical reactions between atmospheric species that vary substantially in time and space. To model these and other species on a global scale requires the use of a global, three-dimensional chemistry, transport, and deposition (CTD) model. In this work, I developed two such three dimensional CTD models. The first model incorporated the chemistry necessary to model tropospheric ozone production from the reactions …

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information.

This Paper develops a statistical strength theory for three-dimensionally (3-D) oriented short-fiber reinforced composites. Short-fiber composites are usually reinforced with glass and ceramic short fibers and whiskers. These reinforcements are brittle and display a range of strength values, which can be statistically characterized by a Weibull distribution. This statistical nature of fiber strength needs to be taken into account in the prediction of composite strength. In this paper, the statistical nature of fiber strength is incorporated into the calculation of direct fiber strengthening, and a maximum-load composite failure criterion is adopted to calculate the composite strength. Other strengthening mechanisms such as residual thermal stress, matrix work hardening, and short-fiber dispersion hardening are also briefly discussed.

This presents information about household end-use consumption of energy and expenditures for that energy. These data were collected in the 1993 Residential Energy Consumption Survey; more than 7,000 households were surveyed for information on their housing units, energy consumption and expenditures, stock of energy-consuming appliances, and energy-related behavior. The information represents all households nationwide (97 million). Key findings: National residential energy consumption was 10.0 quadrillion Btu in 1993, a 9% increase over 1990. Weather has a significant effect on energy consumption. Consumption of electricity for appliances is increasing. Houses that use electricity for space heating have lower overall energy expenditures than households that heat with other fuels. RECS collected data for the 4 most populous states: CA, FL, NY, TX.

This report presents the conceptual design for a Direct-Hydrogen-Fueled Proton Exchange Membrane (PEM) Fuel Cell System for transportation applications. The design is based on the initial selection of the Chrysler LH sedan as the target vehicle with a 50 kW (gross) PEM Fuel Cell Stack (FCS) as the primary power source, a battery-powered Load Leveling Unit (LLU) for surge power requirements, an on-board hydrogen storage subsystem containing high pressure gaseous storage, a Gas Management Subsystem (GMS) to manage the hydrogen and air supplies for the FCS, and electronic controllers to control the electrical system. The design process has been dedicated to the use of Design-to-Cost (DTC) principles. The Direct Hydrogen-Powered PEM Fuel Cell Stack Hybrid Vehicle (DPHV) system is designed to operate on the Federal Urban Driving Schedule (FUDS) and Hiway Cycles. These cycles have been used to evaluate the vehicle performance with regard to range and hydrogen usage. The major constraints for the DPHV vehicle are vehicle and battery weight, transparency of the power system and drive train to the user, equivalence of fuel and life cycle costs to conventional vehicles, and vehicle range. The energy and power requirements are derived by the capability of the DPHV system to …

As Lawrence Livermore National Laboratory moves forward with the design of the National Ignition Facility (NIF) in the Inertial Confinement Fusion (ICF) program, issues relating to the detection and measurement of laser-induced damage on large optics must be addressed. Currently, microscopy is used to evaluate surface quality and measure damage thresholds on small witness samples. In order to evaluate large areas, an automated system was constructed which can scan optics with dimensions as large as 1 meter and weighing as much as 400 pounds. The use of microscopy as the main test diagnostic has been replaced with an optical scatter detection system. Now large areas can be rastered, and maps can be generated, reflecting inherent and laser-induced scatter in multilayer optical coatings and bulk materials. The integrated scattered light from a test piece is measured in transmission using a HeNe laser as the probe source. When the probe beam is overlapped on a pulsed, high power, ND:YAG laser beam, damage related scatter may be measured. This technique has been used for: (1) mapping of inherent scatter in an optic, (2) on-the-fly damage detection during a high fluence raster scan of an optic, and (3) single site damage evaluation for the …

This Conversion and Blending Facility (CBF) will have two missions: (1) convert HEU materials into pure HEU oxide and (2) blend the pure HEU oxide with depleted and natural uranium oxide to produce an LWR grade LEU product. The primary emphasis of this blending operation will be to destroy the weapons capability of large, surplus stockpiles of HEU. The blended LEU product can only be made weapons capable again by the uranium enrichment process. To the extent practical, the chemical and isotopic concentrations of blended LEU product will be held within the specifications required for LWR fuel. Such blended LEU product will be offered to the United States Enrichment Corporation (USEC) to be sold as feed material to the commercial nuclear industry. Otherwise, blended LEU will be produced as a waste suitable for storage or disposal.

This brief report contains calculations of deflections and stresses of the support frame on the XMM project. The goal is to provide an independent view of structural integrity of the frame utilizing a noncomputer approach to design based on elementary closed form solutions and approximate models of mechanical and structural behavior. It is recognized that full confidence can only be assured when computer generated results pertaining to the critical areas and features of the integrating structure can be enveloped by the bracketing solutions. Although the computer solutions have come from the three independent sources, this report utilizes the numerical values from the LLNL studies represented by the computer runs and analysis of the critical elements of the frame. Since the frame geometry, deformation patterns, and the nature of loading are highly complex, this study is restricted to simplified models of selected areas of the structure which can be handled by the conventional formulas and reasonable approximations. This report contains some comments related to material properties, stress concentration, and elements of fracture mechanics directly applicable to frame analysis and design. Such topics and parameters fall usually outside the finite element modeling, but they can have a crucial influence on the mechanical …

An improved understanding of the variability of regional seismic phases with distance is needed to improve the performance and transportability of regional seismic discriminants. Observations of large variations in regional phase amplitudes, over relatively short distances, are not uncommon. For example, large variations in Pn amplitudes of the Non-Proliferation Experiment (NPE) were observed along lines to the west (e.g., Keller et al., 1994), and northwest (e.g., McCormack et al., 1994). Numerous studies, in a number of areas, have also observed large variations in Sn and Lg over relatively short distances (e.g., Kadinsky-Cade et al., 1981; Ni and Barazangi, 1983). An improved understanding of these variations has been gained from numerous empirical observations (e.g., Chavez and Priestley, 1984; Zhang et al., 1994) and theoretical studies (e.g., Campillo, 1990, Kennett, 1993). We are developing a number of techniques and procedures for characterizing such features on a region specific basis.

Researchers at the Lawrence Livermore National Laboratory and EG&G Energy Measurements are developing a new solid-state power system for two proposed accelerators. One of the accelerators is a circular arrangement of induction cells called a recirculator. It is designed to accelerate heavy ions for an inertial fusion study that proposes to substitute heavy-ion beams for laser beams as the driver for fusion targets. The other accelerator is a linear induction accelerator for electron beams called the Advanced Radiographic Machine (ARM). Both accelerators require their induction cells to be pulsed at a very high repetition frequency (prf) for a short burst containing 5 to 15 pulses. The recirculator has a pulse schedule that varies in pulse width from 1 {mu}s to 400 ns and in prf from 50 to 150 kHz. The ARM accelerator has a pulse schedule that varies in pulse width from 1 {mu}s to 200 ns and in prf from 150 kHz to 1 MHz. The need for complex pulse agility in these accelerators led the authors to examine solid-state switching components that have an on/off capability. The intrinsic speed of solid-state switching satisfies the high prf requirements, while the on/off switching action of some semiconductor devices enables …

This Conversion and Blending Facility (CBF) will have two missions: (1) convert HEU materials to pure HEU uranyl nitrate (UNH) and (2) blend pure HEU UNH with depleted and natural UNH to produce HEU UNH crystals. The primary emphasis of this blending operation will be to destroy the weapons capability of large, surplus stockpiles of HEU. The blended LEU product can only be made weapons capable again by the uranium enrichment process. To the extent practical, the chemical and isotopic concentrations of blended LEU product will be held within the specifications required for LWR fuel. Such blended LEU product will be offered to the United States Enrichment Corporation (USEC) to be sold as feed material to the commercial nuclear industry. Otherwise, blended LEU Will be produced as a waste suitable for storage or disposal.

Economical dewatering of an ultra-fine clean coal product to a 20% or lower level moisture will be an important step in successful implementation of the advanced fine coal cleaning processes. The main objective of the proposed program is to evaluate a novel surface modification technique, which utilizes the synergistic effect of metal ions-surfactant combination, for dewatering of ultra-fine clean coal on a proof-of-concept (POC) scale of 1 to 2 tph. The novel surface modification technique developed at the UKCAER will be evaluated using vacuum, centrifuge, and hyperbaric filtration equipment. Dewatering tests will be conducted using the fine clean coal froth produced by the column flotation units at the Powell Mountain Coal Company, Mayflower Preparation Plant in St. Charles, Virginia. The POC-scale studies will be conducted on two different types of clean coal, namely, high sulfur and low sulfur clean coal. The Mayflower Plant processes coals from five different seams, thus the dewatering studies results could be generalized for most of the bituminous coals. During this quarter, addition of reagents such as ferric ions and a novel concept of in-situ polymerization (ISP) was studied in the laboratory. Using the ISP approach with vacuum filtration provided 25% moisture filter cake compared to …

This report describes the Conversion and Blending Facility (CBF) which will have two missions: (1) convert surplus HEU materials to pure HEU UF{sub 6} and a (2) blend the pure HEU UF{sub 6} with diluent UF{sub 6} to produce LWR grade LEU-UF{sub 6}. The primary emphasis of this blending be to destroy the weapons capability of large, surplus stockpiles of HEU. The blended LEU product can only be made weapons capable again by the uranium enrichment process. The chemical and isotopic concentrations of the blended LEU product will be held within the specifications required for LWR fuel. The blended LEU product will be offered to the United States Enrichment Corporation (USEC) to be sold as feed material to the commercial nuclear industry.

The mission of this Conversion and Blending Facility (CBF) will be to blend surplus HEU metal and alloy with depleted uranium metal to produce an LEU product. The primary emphasis of this blending operation will be to destroy the weapons capability of large, surplus stockpiles of HEU. The blended LEU product can only be made weapons capable again by the uranium enrichment process. The blended LEU will be produced as a waste suitable for storage or disposal.

During the time period between February 1994 and September 1995, Westinghouse Hanford Company (WHC) sampled the waste tank headspace of 43 single-shell tanks for a variety of gaseous and/or volatile and semi-volatile compounds. This report summarizes the results of analyses of those sampling activities with respect to both the Priority 1 Safety Issues and relative to the detection in the headspace of significant concentrations of target analytes relating to worker breathing space considerations as recommended by the Pacific Northwest Laboratory (PNL) Toxicology Review Panel. The information contained in the data tables was abstracted from the vapor sampling and analysis tank characterization reports. Selected results are tabulated and summarized. Sampling equipment and methods, as well as sample analyses, are briefly described. Vapor sampling of passively ventilated single-shell tanks (tanks C-105, C-106, and SX-106 were sampled and are actively ventilated) has served to highlight or confirm tank headspace conditions associated with both priority 1 safety issues and supports source term analysis associated with protecting worker health and safety from noxious vapors.