A new type of electrodynamic balance was designed, constructed and applied to the study of the chemistry of macerals and the chemical reaction between CaO sorbent particles and SO[sub 2]. The single-particle device was coupled to a Raman spectrometer. With this balance a single electrically charged microparticle is suspended in visible and infrared laser beams by means of superposed ac and dc electrical fields. The apparatus was designed to permit gas flow through the chamber so that gas-solid and gas-liquid chemical reactions can be carried out. A visible laser beam was used to illuminate the particle for Raman and fluorescence measurements, and an infrared laser beam was used to heat the particle. An overview of the experimental system is presented in Figure 1. The levitated particles were heated from two sides using a CO[sub 2] laser operating at the infrared wavelength of 10.6 [mu]m. The optical system used to direct the heating laser beam to the target is shown in Figure 2. Infrared detectors indicated in Figure 1 were used to measure the particle temperature by two-color pyrometery. A new technique was explored to independently determine the particle temperature; the method involves measuring the ratio of the intensities of Stokes …

A new type of electrodynamic balance was designed, constructed and applied to the study of the chemistry of macerals and the chemical reaction between CaO sorbent particles and SO{sub 2}. The single-particle device was coupled to a Raman spectrometer. With this balance a single electrically charged microparticle is suspended in visible and infrared laser beams by means of superposed ac and dc electrical fields. The apparatus was designed to permit gas flow through the chamber so that gas-solid and gas-liquid chemical reactions can be carried out. A visible laser beam was used to illuminate the particle for Raman and fluorescence measurements, and an infrared laser beam was used to heat the particle. An overview of the experimental system is presented in Figure 1. The levitated particles were heated from two sides using a CO{sub 2} laser operating at the infrared wavelength of 10.6 {mu}m. The optical system used to direct the heating laser beam to the target is shown in Figure 2. Infrared detectors indicated in Figure 1 were used to measure the particle temperature by two-color pyrometery. A new technique was explored to independently determine the particle temperature; the method involves measuring the ratio of the intensities of Stokes …

During this period work has encompassed: (a) development of electropotential drop techniques to monitor the growth of cracks in steel specimens for a variety of specimen geometries; (b) micromechanical modeling of fracture using finite element calculations of crack and notch-tip stress and strain fields; (3) examining helium effects on radiation damage in austenitic and ferritic stainless steels; (4) analysis of the degradation of the mechanical properties of austenitic stainless steels for the purpose of assessing the feasibility of using these steels in ITER; (5) development of an integrated approach to integrity assessment; and (6) development of advanced methods of measuring fracture properties.

During this period work has encompassed: (a) development of electropotential drop techniques to monitor the growth of cracks in steel specimens for a variety of specimen geometries; (b) micromechanical modeling of fracture using finite element calculations of crack and notch-tip stress and strain fields; (3) examining helium effects on radiation damage in austenitic and ferritic stainless steels; (4) analysis of the degradation of the mechanical properties of austenitic stainless steels for the purpose of assessing the feasibility of using these steels in ITER; (5) development of an integrated approach to integrity assessment; and (6) development of advanced methods of measuring fracture properties.

Gamma-induced volatility of simulated DWPF high-level nuclear waste glasses is highly dependent upon the redox state of the glass. For oxidized glasses with an Fe{sup 2+}/(Fe{sup 2+} + Fe{sup 3+}) ratio < 0.1, no volatility was detected after gamma irradiation. Since the projected DWPF high-level radioactive waste glasses will be oxidized, no significant gamma-induced volatility is expected for these glasses upto the glass transition temperature. For larger pieces of highly-reduced DWPF simulated waste glass, no volatility was observed (using {approximately}100 mg pieces in the TGA) after gamma irradiation. However, for powdered samples of this reduced glass, volatility changes upon gamma radiation were detected at 350 and 475{degree}C. The volatility at 350{degree}C was due to changes at the glass surface whereas the change in volatility at 475{degree}C were due to interactions of gamma irradiation within the bulk of the glass. The glass transition temperatures of both oxidized and reduced glasses were unaffected by gamma irradiation but did increase upon a second heat cycle. Results are also presented which reveal that no significant change in redox level within the glass occurred as a result of gamma irradiation.

Gamma-induced volatility of simulated DWPF high-level nuclear waste glasses is highly dependent upon the redox state of the glass. For oxidized glasses with an Fe[sup 2+]/(Fe[sup 2+] + Fe[sup 3+]) ratio < 0.1, no volatility was detected after gamma irradiation. Since the projected DWPF high-level radioactive waste glasses will be oxidized, no significant gamma-induced volatility is expected for these glasses upto the glass transition temperature. For larger pieces of highly-reduced DWPF simulated waste glass, no volatility was observed (using [approximately]100 mg pieces in the TGA) after gamma irradiation. However, for powdered samples of this reduced glass, volatility changes upon gamma radiation were detected at 350 and 475[degree]C. The volatility at 350[degree]C was due to changes at the glass surface whereas the change in volatility at 475[degree]C were due to interactions of gamma irradiation within the bulk of the glass. The glass transition temperatures of both oxidized and reduced glasses were unaffected by gamma irradiation but did increase upon a second heat cycle. Results are also presented which reveal that no significant change in redox level within the glass occurred as a result of gamma irradiation.

The overall objective is to study the mechanisms and the energy dependence of heavy ion fragmentation by studying the reactions of heavy ion projectiles (e.g. [sup 4]He, [sup 16]O, [sup 20]Ne, [sup 28]Si, [sup 56]Fe) in a variety of targets (H, He, C, Si, Cu, Pb) and at a number of beam energies exceeding 0.1 GeV/nucleon. The results have application to questions in high-energy nuclear astrophysics. Most of the discussion is on low-energy [sup 16]O,[sup 28]Si data analysis. The description includes analysis procedures and techniques, detector calibrations, data selections and normalizations. Cross section results for the analysis are also presented. 83 figs., 6 tabs., 73 refs.

The overall objective is to study the mechanisms and the energy dependence of heavy ion fragmentation by studying the reactions of heavy ion projectiles (e.g. {sup 4}He, {sup 16}O, {sup 20}Ne, {sup 28}Si, {sup 56}Fe) in a variety of targets (H, He, C, Si, Cu, Pb) and at a number of beam energies exceeding 0.1 GeV/nucleon. The results have application to questions in high-energy nuclear astrophysics. Most of the discussion is on low-energy {sup 16}O,{sup 28}Si data analysis. The description includes analysis procedures and techniques, detector calibrations, data selections and normalizations. Cross section results for the analysis are also presented. 83 figs., 6 tabs., 73 refs.

The Department of Energy has established specifications for the DWPF product, which require that the DWPF provide estimates of the service life of the canister label, provide assurance that the DWPF canister will be leaktight when shipped, demonstrate that the contents of the canistered waste form will not lead to internal corrosion of the canister. The DWPF has elected to meet these requirements, in part, by characterizing canisters produced in the facility during the Startup Test Program. This includes canisters filled on the pour turntable (normal conditions) and canisters filled on the drain turntable (credible upset conditions expected to be more severe due to higher temperatures). This document identifies the requirements for characterization of the canister fabrication welds and canister labels (characterization of canister closure welds is being performed by Equipment Engineering Section), and for estimation of their service life in DWPF's Glass Waste Storage Building.

The Department of Energy has established specifications for the DWPF product, which require that the DWPF provide estimates of the service life of the canister label, provide assurance that the DWPF canister will be leaktight when shipped, demonstrate that the contents of the canistered waste form will not lead to internal corrosion of the canister. The DWPF has elected to meet these requirements, in part, by characterizing canisters produced in the facility during the Startup Test Program. This includes canisters filled on the pour turntable (normal conditions) and canisters filled on the drain turntable (credible upset conditions expected to be more severe due to higher temperatures). This document identifies the requirements for characterization of the canister fabrication welds and canister labels (characterization of canister closure welds is being performed by Equipment Engineering Section), and for estimation of their service life in DWPF`s Glass Waste Storage Building.

In the US, the transportation sector consumes over one quarter of the entire energy used, almost in its entirety as petroleum products, and in quantities greater than the total US domestic oil production. The transportation sector is responsible for a significant fraction of all emissions that either prevent US cities from achieving compliance with EPA air quality standards or have serious global change implications. Finally, the GDP (Gross Domestic Product) and employment due to the sector are low and incommensurate with the high fraction of energy that the transportation sector consumes. We examine below this situation in some detail and make recommendations for improvements.

Hybrid technologies for the reduction of NO[sub x] emissions from coal-fired utility boilers have shown the potential to offer greater levels of NO[sub x] control than the sum of the individual technologies, leading to more cost effective emissions control strategies. Energy and Environmental Research Corporation (EER) has developed a hybrid NO[sub x] control strategy involving two proprietary concepts which has the potential to meet the US Department of Energy's NO[sub x] reduction goal at a significant reduction in cost compared to existing technology. The process has been named CombiNO[sub x]. CombiNO[sub x] is an integration of three technologies: modified reburning, promoted selective noncatalytic reduction (SNCR) and methanol injection. These technologies are combined to achieve high levels of NO[sub x] emission reduction from coal-fired power plants equipped with S0[sub x] scrubbers. The first two steps, modified reburning and promoted SNCR are linked. It has been shown that performance of the SNCR agent is dependent upon local oxidation of CO. Reburning is used to generate the optimum amount of CO to promote the SNCR agent. Approximately 10 percent reburning is required, this represents half of that required for conventional reburning. If the reburn fuel is natural gas, the combination of reburning and …

Hybrid technologies for the reduction of NO{sub x} emissions from coal-fired utility boilers have shown the potential to offer greater levels of NO{sub x} control than the sum of the individual technologies, leading to more cost effective emissions control strategies. Energy and Environmental Research Corporation (EER) has developed a hybrid NO{sub x} control strategy involving two proprietary concepts which has the potential to meet the US Department of Energy`s NO{sub x} reduction goal at a significant reduction in cost compared to existing technology. The process has been named CombiNO{sub x}. CombiNO{sub x} is an integration of three technologies: modified reburning, promoted selective noncatalytic reduction (SNCR) and methanol injection. These technologies are combined to achieve high levels of NO{sub x} emission reduction from coal-fired power plants equipped with S0{sub x} scrubbers. The first two steps, modified reburning and promoted SNCR are linked. It has been shown that performance of the SNCR agent is dependent upon local oxidation of CO. Reburning is used to generate the optimum amount of CO to promote the SNCR agent. Approximately 10 percent reburning is required, this represents half of that required for conventional reburning. If the reburn fuel is natural gas, the combination of reburning and …

In 1979, a K-edge densitometer (KED) was installed by the Safeguards Assay group from Los Alamos National Laboratory in the PNC reprocessing plant at Tokai-mura, Japan. It uses an active nondestructive assay technique, KED, to measure the plutonium concentration of the product solution. The measurement uncertainty of an assay depends on the count time chosen, but can be 0.5% or better. The computer hardware and software were upgraded in 1992. This manual describes the operation of the instrument, with an emphasis on the user interface to the software.

In 1979, a K-edge densitometer (KED) was installed by the Safeguards Assay group from Los Alamos National Laboratory in the PNC reprocessing plant at Tokai-mura, Japan. It uses an active nondestructive assay technique, KED, to measure the plutonium concentration of the product solution. The measurement uncertainty of an assay depends on the count time chosen, but can be 0.5% or better. The computer hardware and software were upgraded in 1992. This manual describes the operation of the instrument, with an emphasis on the user interface to the software.

Often inert material exists in front of a calorimeter. If an electromagnetic (EM) shower initiates in this material, and energy is not sampled by the calorimeter, then energy resolution will be degraded. It is crucial to minimize the amount of inert material. Algorithms using a separate readout of the energy early in the shower (a ``preshower`` detector) can also be used to alleviate the reduced performance. This problem has previously been studied using CDF test beam data. In addition, an EGS simulation was used to look at the methods of using the preshower (PS) readout to reduce the energy error.

Often inert material exists in front of a calorimeter. If an electromagnetic (EM) shower initiates in this material, and energy is not sampled by the calorimeter, then energy resolution will be degraded. It is crucial to minimize the amount of inert material. Algorithms using a separate readout of the energy early in the shower (a preshower'' detector) can also be used to alleviate the reduced performance. This problem has previously been studied using CDF test beam data. In addition, an EGS simulation was used to look at the methods of using the preshower (PS) readout to reduce the energy error.

The mechanical behavior of a silicon crystal under bending is investigated. For a crystal of length 30 mm and thickness 3 mm, to achieve the specified bend angle of 0.64 mrad, the appropriate angle of the aluminum punches is 0.96 mrad.

The mechanical behavior of a silicon crystal under bending is investigated. For a crystal of length 30 mm and thickness 3 mm, to achieve the specified bend angle of 0.64 mrad, the appropriate angle of the aluminum punches is 0.96 mrad.

During the second quarter, we initiated Task 2 (Process and Catalyst Variable Study). This task involves an investigation of methods for vanadium phosphate (VPO) catalyst synthesis and activation as well as detailed testing of the catalysts produced for activity and selectivity in methane selective oxidation. As we initiated work on Task 2, three problem areas were identified: Preparation of catalysts with P:V ratio greater than 1. Activation of the precursor to produce the B-phase described in the patent literature. Achieving high (>95 percent) carbon balances in the bench-scale test unit. Each of these problems has been addressed and overcome during this quarter. Several catalysts with P:V ratios ranging from 0.95 to 1.1 have been prepared. Activation procedures are continuing to be investigated. We have found several procedures which yield catalysts having the desired X-ray diffraction pattern. The reactor system was modified and analytical procedures improved so that in a 7-day run using V{sub 2}O{sub 5} as the catalyst, carbon balances ranged from 95 to 105 percent.

The principal objective of this research is to determine the role that host petroleum-derived oils (1000 [degree]F[sup +]), as that of catalytically treated host oils, play when used as liquefaction solvents in coprocessing with coal. The host oils will be extensively characterized and then pretreated in a number of ways which involve catalytic reactions such as hydrogenation, hydrocracking, and isomerization. The pretreated oils will then be characterized by elemental analysis, catalytic dehydrogenation, and NMR. The effects of the host oil on coprocessing with coal will be compared to those obtained using catalytically modified heavy oils. When appropriate, model compounds will be used to study specific reactions brought about by the pretreatments. A total of 18 pretreatment runs have been made on an AMOCO vacuum tower residuum, VTR, in an attempt to increase its hydrogen content from 10.2 wt % to a level of about 11.5%. This pretreatment resulted in a significant increase in the hydrogen content of the starting oil (10.2 wt % to 11.2%).

The principal objective of this research is to determine the role that host petroleum-derived oils (1000 {degree}F{sup +}), as that of catalytically treated host oils, play when used as liquefaction solvents in coprocessing with coal. The host oils will be extensively characterized and then pretreated in a number of ways which involve catalytic reactions such as hydrogenation, hydrocracking, and isomerization. The pretreated oils will then be characterized by elemental analysis, catalytic dehydrogenation, and NMR. The effects of the host oil on coprocessing with coal will be compared to those obtained using catalytically modified heavy oils. When appropriate, model compounds will be used to study specific reactions brought about by the pretreatments. A total of 18 pretreatment runs have been made on an AMOCO vacuum tower residuum, VTR, in an attempt to increase its hydrogen content from 10.2 wt % to a level of about 11.5%. This pretreatment resulted in a significant increase in the hydrogen content of the starting oil (10.2 wt % to 11.2%).

The Internal Dosimetry Department at the Y-12 Plant maintains a state-of-the-art bioassay program managed under the guidance and regulations of the Department of Energy. The two major bioassay techniques currently used at Y-12 are the in vitro (urinalysis) and in vivo (lung counting) programs. Fecal analysis (as part of the in vitro program) is another alternative; however, since both urine and fecal analysis provide essentially the same capabilities for detecting exposures to uranium, the urinalysis is the main choice primarily for aesthetic reasons. The bioassay frequency is based on meeting NCRP 87 objectives which are to monitor the accumulation of radioactive material in exposed individuals, and to ensure that significant depositions are detected.

In order to employ molecular dynamics (MD) methods, commonly used in condensed matter physics, we have derived the equations of motion for a beam of charged particles in the rotating rest frame of the reference particle. We include in the formalism that the particles are confined by the guiding and focusing magnetic fields, and that they are confined in a conducting vacuum pipe while interacting with each other via a Coulomb force. Numerical simulations using MD methods has been performed to obtain the equilibrium crystalline beam structure. The effect of the shearing force, centrifugal force, and azimuthal variation of the focusing strength are investigated. It is found that a constant gradient storage ring can not give a crystalline beam, but that an alternating-gradient (AG) structure can. In such a machine the ground state is, except for one-dimensional (1-D) crystals, time dependent. The ground state is a zero entropy state, despite the time-dependent, periodic variation of the focusing force. The nature of the ground state, similar to that found by Schiffer et al. depends upon the density and the relative focusing strengths in the transverse directions. At low density, the crystal is 1-D. As the density increases, it transforms into various …