Work on ICRF interaction with the edge plasma is reported. ICRF generated convective cells have been established as an important mechanism for influencing edge transport and interaction with the H-mode, and for controlling profiles in the tokamak scrape-off-layer. Power dissipation by rf sheaths has been shown to be significant for some misaligned ICRF and IIBW antenna systems. Near-field antenna sheath work has been extended to the far-field case, important for experiments with low single pass absorption. Impurity modeling and Faraday screen design support has been provided for the ICRF community. In the area of core-ICRF physics, the kinetic theory of heating by applied ICRF waves has been extended to retain important geometrical effects relevant to modeling minority heated tokamak plasmas, thereby improving on the physics base that is standard in presently employed codes. Both the quasilinear theory of ion heating, and the plasma response function important in wave codes have been addressed. In separate studies, it has been shown that highly anisotropic minority heated plasmas can give rise to unstable field fluctuations in some situations. A completely separate series of studies have contributed to the understanding of tokamak confinement physics. Additionally, a diffraction formalism has been produced which will be …

The Michigan Technological University Teacher Education Program received funding from the US Department of Energy for the purpose of providing capable and suitably inclined, MTU Engineering and Science students a chance to explore high school level science and mathematics teaching as a career option. Ten undergraduate students were selected from nominations and were paired with mentor teachers for the study. This report covers the experience of the first ten nominees and their participation in the program.

The workshop was called to assess the performance of neutron dosimetry per the responses from ten DOE accelerator facilities to an Office of Energy Research questionnaire regarding implementation of a personnel dosimetry requirement in DRAFT DOE 5480.ACC, Safety of Accelerator Facilities''. The goals of the workshop were to assess the state of dosimetry at high energy accelerators and if such dosimetry requires improvement, to reach consensus on how to proceed with such improvements. There were 22 attendees, from DOE Programs and contract facilities, DOE, Office of Energy Research (ER), Office of Environmental Safety and Health (EH), Office of Fusion Energy, and the DOE high energy accelerator facilities. A list of attendees and the meeting agenda are attached. Copies of the presentations are also attached.

This study employs Lycopersicon esculentum and L. pennellii as model systems to study the interspecific reproductive barriers unilateral incongruity (UI), hybrid breakdown and interspecific aberrant ratio syndrome (IARS).

This document is a program from the Office of Technology Assessment (OTA) Forum on Technology and Governance in the 1990s, held on January 27, 1993. The program includes a schedule of events and biographical information on each of the forum speakers.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Dan Morales, regarding a legal question submitted for clarification; Whether the Fort Bend County Tax Assessor/Collector may collect additional taxes for change of use of agricultural land in light of the 1989 amendment to section 23.55(e) of the Tax Code (RQ-325)

The composites industry employs a method of high speed continuous reinforcement lay-down called filament winding. This is a process where resin impregnated tows, bundles of filament, are wound over a rotating mandrel. The tows, hereafter referred to as filament, are laid down over the rotating mandrel at a prescribed wind angle. Consider a cylindrical filament winding mandrel with conical features such that the filament is tangent to both the cylinder and the cone simultaneously. A gap is formed between the points of tangency. The gap distance measured along a line normal to the filament and intersecting the mandrel`s axis of rotation. The maximum distance occurs between the filament and a point on the intersection of the cylinder and the cone. The problems this paper addresses are: given a cylindrical filament winding mandrel with conical features, what is the gap size for a given wind angle; conversely what is the wind angle for a given gap size; and what does the geometry need to be in the mandrel transition area between the cylinder cone such that the filament remains in contact with the mandrel at all times?

The Inventory of Power Plants in the United States is prepared annually by the Survey Management Division, Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), US Department of Energy (DOE). The purpose of this publication is to provide year-end statistics about electric generating units operated by electric utilities in the United States (the 50 States and the District of Columbia). The publication also provides a 10-year outlook of future generating unit additions. Data summarized in this report are useful to a wide audience including Congress, Federal and State agencies, the electric utility industry, and the general public. Data presented in this report were assembled and published by the EIA to fulfill its data collection and dissemination responsibilities as specified in the Federal Energy Administration Act of 1974 (Public Law 93-275) as amended. The report is organized into the following chapters: Year in Review, Operable Electric Generating Units, and Projected Electric Generating Unit Additions. Statistics presented in these chapters reflect the status of electric generating units as of December 31, 1992.

We apply dual-band infrared (DBIR) imaging as a dynamic thermal tomography tool for wide area inspection of a Boeing 737 aircraft, and several Boeing KC-135 aircraft panels. Our analyses are discussed in this report. After flash-heating the aircraft skin, we record synchronized DBIR images every 40 ms, from onset to 8 seconds after the heat flash. We analyze selective DBIR image ratios which enhance surface temperature contrast and remove surface-emissivity clutter (from dirt, dents, tape, markings, ink, sealants, uneven paint, paint stripper, exposed metal and roughness variations). The Boeing 737 and KC-135 aircraft fuselage panels have varying percent thickness losses from corrosion. We established the correlation of percent thickness loss with surface temperature rise (above ambient) for a partially corroded F-18 wing box structure and several aluminum reference panels. Based on this correlation, lap splice temperatures rise 1{degrees}C per 24 {plus_minus} 5 % material loss at 0.4 s after the heat flash. We show tables, charts and temperature maps of typical lap splice material losses for the riveted (and bonded) Boeing 737, and the riveted (but unbonded) Boeing KC-135. We map the fuselage composite thermal inertia, based on the (inverse) slope of the surface temperature versus inverse square root of …

The main advantage of the project is that it allowed PTI to gain knowledge and experience about the proper approach, methods and hardware required to properly optimize and control column flotation performance. Many operational problems were incurred during the project, some of that PTI was able to solve during the project and other that must be overcome as the technology is further developed and commercialized. The key operating problems experienced with the KEN-FLOTE{sup TM} Column that must be further researched and overcome include: (1)The low concentrate solids content which limited the throughput capacity of the column, due to high froth washing requirements. The low concentrate solids content also lead to difficulty obtaining accurate On-Line Monitor measurements, due to the poor measurement sensitivity obtained with low solids content samples (particularly less than 5.0 wt %). (2) The higher-than-anticipated reagent dosages that undoubtedly contributed to the low solids content listed above, and also caused foaming problems within PTI`s On-Line Monitor. A defoaming reagent addition (Nalco 7810) was required to provide consistent sample size and reproducible On-Line Monitor counts for the concentrate samples collected within the circuit. PTI and UK`s CAER staff will continue to research alternative column design, particularly alternative air bubble …

Work on ICRF interaction with the edge plasma is reported. ICRF generated convective cells have been established as an important mechanism for influencing edge transport and interaction with the H-mode, and for controlling profiles in the tokamak scrape-off-layer. Power dissipation by rf sheaths has been shown to be significant for some misaligned ICRF and IIBW antenna systems. Near-field antenna sheath work has been extended to the far-field case, important for experiments with low single pass absorption. Impurity modeling and Faraday screen design support has been provided for the ICRF community. In the area of core-ICRF physics, the kinetic theory of heating by applied ICRF waves has been extended to retain important geometrical effects relevant to modeling minority heated tokamak plasmas, thereby improving on the physics base that is standard in presently employed codes. Both the quasilinear theory of ion heating, and the plasma response function important in wave codes have been addressed. In separate studies, it has been shown that highly anisotropic minority heated plasmas can give rise to unstable field fluctuations in some situations. A completely separate series of studies have contributed to the understanding of tokamak confinement physics. Additionally, a diffraction formalism has been produced which will be …

The Super Collider is a high-energy scientific instrument composed of a 53-mile-long ring of proton accelerators designed to collide protons and evaluate the emanating particles. The Oak Ridge Y-12 Plant is under contract to perform work for the Superconducting Super Collider Laboratory (SSCL) and has been asked to develop manufacturing processes for components of the gammas, electrons, muons (GEM) detector. Three welded subassemblies are involved in the fabrication of these conductors. The superconducting cable is enclosed in a stainless steel conduit, which is then enclosed in an aluminum sheath. The ends of the conductor are terminated with a connector assembly joined to the superconductor, the conduit, and the sheath. Initially, the conduit weld was to be a single-pass, autogenous gas-tungsten arc weld. The authors made a great effort to get full penetration without root reinforcement on the inside of the tube. When the authors were unable to meet all of the weld requirements with an autogenous weld, they shifted development efforts to making the weld using an automatic gas-tungsten arc tube welding head with an integral wire feeder. Because reinforcement at the root continued to be a problem, the authors decided to make the weld in two passes. To achieve …

The purpose of this report is to provide input of thermodynamic data on actinide volatilities to EERC for use in their computer code for modeling of metal volatilities in incinerators. It is also anticipated that the data may be documented later in an EPA sponsored ``Metals Bible.`` It should be noted that only upper limits for the volatility of PuO{sub 2}(s) due to PuO{sub 3}(g) and PuO{sub 2}(OH){sub 2}(g) and the volatility of AmO{sub 2} in PuO{sub 2}(s) due to AmO{sub 3}(g) and AmO{sub 2}(OH){sub 2}(g) could be set. The data on the americium vapor species are intended for calculations where AmO{sub 2} is present as a solid solution in PuO{sub 2}(s).

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Dan Morales, regarding a legal question submitted for clarification: Term of office of directors of the El Paso County Water Control and Improvement District (Westway), and related questions (RQ-479)

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Dan Morales, regarding a legal question submitted for clarification: Whether the County of El Paso may use the county law library fund to maintain statutes and reporters located in the chambers of district and county courts (ID# 19317)

The Natural Gas Monthly NGM highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information.

This study employs Lycopersicon esculentum and L. pennellii as model systems to study the interspecific reproductive barriers unilateral incongruity (UI), hybrid breakdown and interspecific aberrant ratio syndrome (IARS).

This publication presents information and compiled data on energy sources. The following information is presented: energy overview; energy consumption; petroleum; natural gas; oil and gas resource development; coal; electricity; nuclear energy; energy prices; and international energy.

High power and radiance laser technologies developed at Lawrence Livermore National Laboratory such as copper-vapor and dye lasers show great promise for material processing tasks. Evaluation of models suggests significant increases in welding, cutting, and drilling capabilities, as well as applications in emerging technologies such as micromachining, surface treatment, and stereolithography. Copper lasers currently operate at 1.8 kW output at approximately three times the diffraction limit and achieve mean time between failures of more than 1,000 hours. Dye lasers have near diffraction limited beam quality at greater than 1.0 kW. Results from cutting and drilling studies in titanium and stainless steel alloys show that cuts and holes with extremely fine features can be made with dye and copper-vapor lasers. High radiance beams produce low distortion and small heat-affected zones. The authors have accomplished very high aspect ratios (> 60:1) and features with micron scale (5-50 {mu}m) sizes. The paper gives a description of the equipment; discusses cutting theory; and gives experimental results of cutting and drilling studies on Ti-6Al-4V and 304 stainless steel.

The effect of Coulomb multipole scattering on the beam emittance is studied with the 6 dimensional injection program ARCHSIM by A. Thiessen. Since the energy loss due to Bhabha scattering is small, the six dimensional simulation can be approximated into transverse 4 dimensional and longitudinal 2 dimensional tracking. The emittance growth agrees well with the multiple scattering theory. The beam loss occurs mainly in the adiabatic capture process in the longitudinal phase space.

In many applications, x-ray multilayer mirrors are exposed to high peak fluxes of x-rays with subsequent damage to the mirror. Mirror damage is a particularly severe problem with the use of multilayers as cavity optics for short wavelength x-ray lasers. Intense optical and x-ray radiation, from the x-ray laser plasma amplifier, often damage the multilayer mirror on time scales of hundreds of picoseconds. The phenomenon of multilayer mirror damage by pulsed x-ray emission has been studied using short duration (500 psec) bursts of soft x-rays 1 from a laser produced gold plasma. The results of the experiments will be compared with some simple models and the possibility of increasing the damage thresholds of short wavelength multilayer mirrors will be discussed.