The U.S. Department of Energy (DOE) has generated and disposed of large volumes of hazardous and radioactive waste as a result of 50 years of nuclear weapons production. DOE is now faced with the problem of remediating its more than 13,000 hazardous waste sites. To be effective for the good of the environment and public health, our nation`s hazardous waste policy must first address several questions: What is the level of risk at federal facilities? (Is remediation really necessary?) Can and should institutional controls be incorporated into the cleanup process? How effective are cleanup technologies? What cleanup standards should be used? What will be done with waste generated during remediation? How do we obtain appropriate stakeholder involvement? Once these questions are answered and a more reliable, predictable policy has been developed, the waste management and environmental restoration program may not be an unwanted drain on America`s pocketbook, and we may have a cleaner country as well.

The ability to bond together two or more silicon wafers greatly expands the variety and complexity of silicon microstructures that can be designed and fabricated. At LLNL, microstructures have been used for many years as hardware in scientific experiments. The activity has recently been expanded into other areas to include microinstruments for biomedical applications and for chemical analysis. Both high temperature (1100{degrees}C) bonding techniques have been used, depending on the application. This paper discusses these applications with emphasis on the most extensive which is the fabrication of microchannel coolers for diode arrays.

The overall project objective is to demonstrate the high efficiency of the Adams Counter-Current shale oil recovery process. The efficiency will first be demonstrated on a small scale, in the current phase, after which the demonstration will be extended to the operation of a small pilot plant. Thus the immediate project objective is to obtain data on oil shale retorting operations in a small batch rotary kiln that will be representative of operations in the proposed continuous process pilot plant. Although an oil shale batch sample is sealed in the batch kiln from the start until the end of the run, the process conditions for the batch are the same as the conditions that an element of oil shale would encounter in a continuous process kiln. Similar chemical and physical conditions (heating, mixing, pyrolysis, oxidation) exist in both systems.The two most important data objectives in this phase of the project are to demonstrate (1) that the heat recovery projected for this project is reasonable and (2) that an oil shale kiln will run well and not plug up due to sticking and agglomeration. The following was completed this quarter. (1) Twelve pyrolysis runs were made on five different oil shales. …

The overall project objective is to demonstrate the high efficiency of the Adams Counter-Current shale oil recovery process. The efficiency will first be demonstrated on a small scale, in the current phase, after which the demonstration will be extended to the operation of a small pilot plant. Thus the immediate project objective is to obtain data on oil shale retorting operations in a small batch rotary kiln that will be representative of operations in the proposed continuous process pilot plant. Although an oil shale batch sample is sealed in the batch kiln from the start until the end of the run, the process conditions for the batch are the same as the conditions that an element of oil shale would encounter in a continuous process kiln. Similar chemical and physical conditions (heating, mixing, pyrolysis, oxidation) exist in both systems.The two most important data objectives in this phase of the project are to demonstrate (1) that the heat recovery projected for this project is reasonable and (2) that an oil shale kiln will run well and not plug up due to sticking and agglomeration. The following was completed this quarter. (1) Twelve pyrolysis runs were made on five different oil shales. …

This document provides a discussion of the technical progress on DOE-PETC Project Number AC22-92PC91338, High Efficiency SO[sub 2] Removal Testing,'' for the time period from January 1 through March 31, 1993. The project involves testing at full-scale utility flue gas desulfurization (FGD) systems to evaluate low capital cost upgrades that may allow these systems to achieve up to 98% SO[sub 2] removal efficiency. The options to be evaluated primarily involve the addition of organic acid buffers to the FGD systems. The base'' project involves testing at one site, Tampa Electric Company's Big Bend Station. Up to five optional sites may be added to the program at the discretion of DOE-PETC. By March 31, 1993, four of those five options had been exercised. The options include testing at Hoosier Energy's Merom Station (Option I), Southwestern Electric Power Company's (SWEPCo) Pirkey Station (Option II), PSI Energy's Gibson Station (Option III), and Duquesne Light's Elrama Station (Option IV). The remainder of this document is divided into three sections. Section 2, Project Summary, provides a brief overview of the technical efforts on this project during the quarter. Section 3, Results, summarizes the outcome of those technical efforts. Results for the Base Program and for …

This document provides a discussion of the technical progress on DOE-PETC Project Number AC22-92PC91338, ``High Efficiency SO{sub 2} Removal Testing,`` for the time period from January 1 through March 31, 1993. The project involves testing at full-scale utility flue gas desulfurization (FGD) systems to evaluate low capital cost upgrades that may allow these systems to achieve up to 98% SO{sub 2} removal efficiency. The options to be evaluated primarily involve the addition of organic acid buffers to the FGD systems. The ``base`` project involves testing at one site, Tampa Electric Company`s Big Bend Station. Up to five optional sites may be added to the program at the discretion of DOE-PETC. By March 31, 1993, four of those five options had been exercised. The options include testing at Hoosier Energy`s Merom Station (Option I), Southwestern Electric Power Company`s (SWEPCo) Pirkey Station (Option II), PSI Energy`s Gibson Station (Option III), and Duquesne Light`s Elrama Station (Option IV). The remainder of this document is divided into three sections. Section 2, Project Summary, provides a brief overview of the technical efforts on this project during the quarter. Section 3, Results, summarizes the outcome of those technical efforts. Results for the Base Program and for …

The relevance of rf-sheath-plasma interactions to ICRF operation in TFTR has been studied. Screen-screen and screen-limiter rf sheaths have been identified and analyzed for the old and new Bay M geometries on TFIR, including sheath voltages driven by both feeders and the central antenna conductor. Calculations have been carried out to determine the effects of ICRF on edge transport (profile flattening by E {times} B convection), impurity influx ({delta}Z{sub eff}) and edge electron heating (FS glow phenomena) as a function of edge plasma parameters, rf power and antenna phasing. It was found that many of the experimentally observed ICRF-edge plasma interactions on TFIR are consistent with the predictions of rf sheath theory.

Work on this coke oven gas cleaning demonstration project (CCT-II) this quarter has been focused on Phase IIB tasks, and include engineering, procurement, construction, and training. Additionally, plans for changes in the operating schedule of the coke plant that affect the demonstration project are described. Engineering efforts are nearly complete. Remaining to be finalized is an assessment of electrical heat tracing/insulation needs for pipe lines, assessment of fire protection requirements, and instrument modifications. Procurement of all major equipment items is complete, except for possible additions to fire fighting capabilities. Major focus is on expediting pipe and structural steel to the project site. Civil construction is complete except for minor pads and bases as required for pipe supports, etc. Erection of the hydrogen sulfide and ammonia scrubber vessels is complete. Installation of scrubber vessel internals is underway. A subcontractor has been retained to develop a computerized program for operations and maintenance training for the coke oven gas treatment plant. Recent developments in the coke plant operating plans will result in reductions in the rate of production of coke oven gas to be processed in the demonstration project.

A serious consideration of laser power beaming for satellite applications appears to have grown out of a NASA mission analysis for transmitting power to lunar bases during the two week dark period. System analyses showed that laser power beaming to the moon in conjunction with efficient, large area solar cell collection panels, were an attractive alternative to other schemes such as battery storage and nuclear generators, largely because of the high space transportation costs. The primary difficulty with this scheme is the need for very high average power visible lasers. One system study indicated that lasers in excess of 10 MW at a wavelength of approximately 850 nm were required. Although such lasers systems have received much attention for military applications, their realization is still a long term goal.

WARPrz is a 2.5 dimensional, cylindrically symmetric, electrostatic, particle-in-cell code. It is part of the WARP family of codes which has been developed to study heavy ion fusion driver issues. WARPrz is being used to study the longitudinal dynamics of heavy ion beams including a longitudinal instability that is driven by the impedance of the LINAC accelerating modules. This instability is of concern because it can enhance longitudinal momentum spread; chromatic abhoration in the lens system restricts the amount of momentum spread allowed in the beam in the final focusing system. The impedance of the modules is modeled by a continuum of resistors and capacitors in parallel in WARPrz. We discuss simulations of this instability including the effect of finite temperature and reflection of perturbations off the beam ends. We also discuss intermittency of axial confining fields (``ears`` fields) as a seed for this instability.

Research is focused on bimetallic compounds of late transition metals with carbon dioxide or CO{sub 2}-containing bridging ligands. The compounds are models for catalytic intermediates in CO{sub 2} fixation/activation processes. Thermolysis was studied. Re, Fe, and Sn complexes were studied.

A Computer Security Program is more than just a concept. It is real action by real people. Under direction of DOE Orders, Martin Marietta Energy systems, Inc., personnel have developed a Microcomputer Security Program that is both effective and sensible. this program works because those involved have a sincere desire to protect DOE information and assets. The Oak Ridge Y-12 Plant is located in Oak Ridge, Tennessee. This facility covers 2.25 miles in the Bear Creek area and consists of approximately 500 buildings, which are located in Protected, Exclusion, and Property Protection Areas. There are some 50 different Energy Systems organizations that comprise the Y-12 Plant. There are approximately 700 classified microcomputers and approximately 5,300 unclassified microcomputers at the site. These resources are used for many different functions including: word processing, computer Aided Design operations, database management, servers for local area networks, and terminal emulators. Most microcomputers are used in a stand-alone mode of operation.

This report covers the research progress made during the calendar year 1992. The new results obtained during this period are described, keyed to the references listed on the last two pages of this report.

This report covers the research progress made during the calendar year 1992. The new results obtained during this period are described, keyed to the references listed on the last two pages of this report.

This document provides data on monthly energy use and fossil fuels. The following sections are included: Highlights: Emissions of greenhouse gases in the United States 1985--1990; Highlights: assessment of energy use in multibuilding facilities; energy overview; energy consumption; petroleum; natural gas; oil and gas resource development; coal; electricity; nuclear energy; energy prices; and international energy.

This document provides information on the supply and disposition of natural gas to a wide audience including industry, consumers, Federal and State agencies, and education institutions. The 1992 data are presented in a sequence that follows natural gas (including supplemental supplies) from its production top its end use. Tables summarizing natural gas supply and disposition from 1988 to 1992 are given for each Census Division and each State. Annual historical data are shown at the national level. Volume 2 of this report presents State-level historical data.

This document provides information on the supply and disposition of natural gas to a wide audience including industry, consumers, Federal and State agencies, and educational institutions. This report, Volume 2, presents historical data for the Nation from 1930 to 1992, and by State from 1967 to 1992. The Supplement of this report presents profiles of selected companies.

The Natural Gas Monthly (NGM) highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer related activities and underground storage data are also reported. From time to time, the NGM features articles designed to assist readers in using and interpreting natural gas information.

This document reports work during this quarter on the project to produce higher alcohols from synthesis gas. A set of four methanol synthesis runs was conducted. Significant catalyst deactivation was experienced, and essentially all of the oil was lost from the reactor over the course of two weeks of operation. Three screening runs of potential high temperature oil were also conducted. However, essentially no oil remained in the reactor after completion of each run. A 1%Rh/1.3%Re/Al{sub 2}O{sub 3} catalyst was prepared from Re and Rh carbonyls with the objective of obtaining intimate contact between Rh and Re atoms. The catalytic activity of this catalyst was explored. Mo was deposited on the catalyst from both molybdenum hexacarbonyl [Mo(CO){sub 6}] and (NH{sub 4}){sub 6}Mo{sub 7}O{sub 24}{center_dot}4H{sub 2}O. The catalytic activity of the molybdenum promoted catalysts was found to be the highest achieved to date under this contract.

In bombardments of {sup 248}Cm with {sup 22}Ne the authors discovered two new isotopes, {sup 265}106 and {sup 266}106, by establishing genetic links between {alpha} decays of the 106 nuclides and SF or {alpha} decays of the daughter (grand-daughter) nuclides. For {sup 266}106 they measured E{sub {alpha}}=8.62{+-}0.06 MeV followed by the SF decay of {sup 262}104 for which they measured a half-life value of 1.2{sup +1.0}{sub {minus}0.5} s. For {sup 265}106 they measured E{sub {alpha}}=8.82{+-}0.06 MeV. They estimated {alpha} half-lives of 10-30 s for {sup 266}106 and 2-30 s for {sup 265}106 with SF branches of {approximately}50% or less. The decay properties of {sup 266}106 indicate a large enhancement in the SF stability of this N=160 nuclide and confirm the existence of the predicted neutron-deformed shell N=162.

The beams in a Heavy Ion beam driven inertial Fusion (HIF) accelerator must be focused onto small spots at the fusion target, and so preservation of beam quality is crucial. The nonlinear self-fields of these space-charge-dominated beams can lead to emittance growth; thus a self-consistent field description is necessary. We have developed a multi-dimensional discrete-particle simulation code, WARP, and are using it to study the behavior of HIF beams. The code`s 3d package combines features of an accelerator code and a particle-in-cell plasma simulation, and can efficiently track beams through many lattice elements and around bends. We have used the code to understand the physics of aggressive drift-compression in the MBE-4 experiment at Lawrence Berkeley Laboratory (LBL). We have applied it to LBL`s planned ILSE experiments, to various ``recirculator`` configurations, and to the study of equilibria and equilibration processes. Applications of the 3d package to ESQ injectors, and of the r, z package to longitudinal stability in driver beams, are discussed in related papers.

A performance review of Austin Independent School District (ISD) examining their use of funds in different areas of the school system.

A new algorithm for space charge emission has been developed to provide the correct (to a few percent) Child-Langmuir steady-state current limits as the number of mesh points in the voltage gap drops to O(10). Further, the transient behavior of such flows compares well with idealized, analytic cases, lending confidence as we extend these algorithms into full RZ geometry with curved emitting surfaces to investigate transient characteristics of realistic injector designs.

We present a combined experimental and threshold study of effects of Sr doping on electronic structure of La{sub 2-x}Sr{sub x}CuO{sub 4}. Electron-positron momentum distributions have been measured to high statistical precision (> 4 {times} 10{sup 8} counts) at room temperature for samples with Sr concentrations of x = 0.0, 0.1, 0.13 and 0.2. Analysis of all four spectra reveal strong features due to electron-positron wavefunction overlap, in quantitative agreement with theoretical calculations. The Sr doped samples show discontinuities consistent with presence of a Fermi surface. The form and position of these features are in general agreement with the predictions of band theory. Correspondence between theory and experiment, as well as some differences, are revealed by a detailed study of the changes in electron-position momentum density with increasing Sr doping.